{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specs:
Display: 11.6" IPS, 1920x1080*
* Sony Vaio Tap 11 panel (Panasonic VVX11F019G00)
Touch: 10-point multi-touch with Active Stylus support*
* Controller: Goodix GT9110P
CPU: Intel Atom x5-z8500 (Pro) | Intel Atom x7-z8700 (Power)
RAM: 4GB Low Power DDR3* (Pro) | 8GB Low Power DDR3** (Power)
* Hynix Dual Channel LPDDR3-1600, 2x2GB (running at 1066MHz, BIOS bug)
** Hynix Dual Channel LPDDR3-1600, 2x4GB (running at 1066MHz, BIOS bug)
eMMC: Samsung CWBD3R 64GB (Pro)* | Samsung CGND3R 64GB (Power)**
* Speed: ~144 Read [MB/s] and ~47 Write [MB/s]
** Speed: ~150 Read [MB/s] and ~103 Write [MB/s]
Audio Codec: Realtek ALC5672
WiFi/Bluetooth: Realtek RTL8723BS
Sensors: G-Sensor*
* Bosch BMA2x2 (Specific Model TO-BE-DEFINED)
Security: Trusted Platform Module 2.0
Cameras: 2.0 MP (front)*, 5.0 MP (rear)**
* OmniVision OV2680
** OmniVision OV5648
Battery: 3.8V x 8000 mAh = 30.4Wh*
* BIOS reported. According to Teclast's Product Webpage it should be 32.3Wh so 8500mAh
Power Supply: "TL-U35" DC 5V/3.5A 2.5mm*10mm (Avoid to use it, it is the cause of all issues such as GPU crashes and Touchscreen instabilities)
OSs: Windows 10 Home x64 (Chinese | English | Russian | Korean)* & Android 5.1 x64 (Multilanguage)
* Fully Activated and Extra Languages can be installed from WU
Weight: 612g (only Tablet)
Size: 30.3cm x 18.53cm x 10.5mm
Click to expand...
Click to collapse
Interior:
X16 Power
Click to expand...
Click to collapse
Drivers:
Driver Cleaner - Run it as Administrator before you install latest DriverPack
Driver Pack - 20160509 - for both Teclast X16 Pro & Power
Older Packages:
Driver Pack - 20160127 - for all Teclast Cherry Trail devices - use 7zip to avoid issues
Driver Pack - 20160106 - for all Teclast Cherry Trail devices
Driver Package (02.01.2016) - Double Driver - (X98 Pro & X16 Pro/Power)
Driver Package (24.12.2015) - Double Driver - (Pro & Power)
Click to expand...
Click to collapse
Drivers Changelog (20160106 and newer):
20160509:
In order to avoid major issues, my own installer has been replaced with proper manufacturer installers
All drivers have been updated to the latest available public versions published by each Hardware Manufacturer
Removed USB 3.0 driver that wasn't offering real performance advantages
Fixed issues with some Archive Managers such as WinRAR
Remember to run the Driver Cleaner before you install the Driver Pack in order to avoid any kind of issue
Support is now limited/specific to the Teclast X16 Pro & Power. If you plan to install it on other devices, then you should do it at your own risk
Older Packages:
20160127:
Almost all Drivers have been updated
Double Driver has been replaced with a dedicated Installer created to avoid any conflict
Accelerometer, Camera and some other particular drivers should be installed correctly on any device
Removed TXEI Firmware Update (will be provided separately)
20160106:
Added all missing drivers (there's no need to use Microsoft's ones when there are proper Vendor Drivers)
Added Double Driver executables
Added TXE Firmware Update
Added Optimized Touchscreen Config. for X16 Pro/Power
Improved GPU Stability
Improved WiFi Stability (even if using an older driver)
Switched to proper screen driver
Switched to proper USB 3.0 Driver by Intel (you'll need to install a certificate)
All Drivers except WiFi have been updated to the latest available version
Click to expand...
Click to collapse
BIOS:
"tPAD 1.42" 20151105 Stock BIOS for X16 Power (Official from Teclast)
Click to expand...
Click to collapse
Misc (Software):
X16 Touchscreen lag fix rev.2
Teclast Downloads Repository
HOW-TO remove Android
- Prepare a bootable USB Stick using your preferred Windows 10 distribution. (Rufus works fine on UEFI systems)
- Boot from USB (you can use built-in Windows Settings to do so - UEFI Firmware Settings - or you can manually switch to the BIOS menu by pressing the DEL button immediately after you turn on the tablet)
- When you reach the "Install" screen do not proceed. Press SHIFT + F10. A command prompt window will be opened.
- Execute these commands "diskpart", "select disk 0", "clean", "exit".
- Close the command prompt window.
- Well Done! You have successfully wiped your eMMC You can now proceed the installation. You won't see any partition now and the installation process will create new windows partitions for you.
Click to expand...
Click to collapse
Extra:
Photo Gallery (X16 Power & Accessories)
Click to expand...
Click to collapse
Reviews:
Techtablets.com (Pro) by @Hendrickson
X16 Power Review coming soon
Click to expand...
Click to collapse
Official Product's Website (Chinese):
Teclast X16 Pro
Teclast X16 Power
Click to expand...
Click to collapse
Based on @Wootever thread layout.
Thank you for creating this new thread.
I'm still waiting for my X16 Power to arrive, it's going to be my first dual boot device. Happy to see that the X98 Pro rooting method works and worried to hear that there is a wakelock issue that seems difficult to fix.
ariadnejro said:
Thank you for creating this new thread.
I'm still waiting for my X16 Power to arrive, it's going to be my first dual boot device. Happy to see that the X98 Pro rooting method works and worried to hear that there is a wakelock issue that seems difficult to fix.
Click to expand...
Click to collapse
Android is easily customizable and partially pre-rooted. (adb runs already as root and you can push files to system without having to manually root the system). I had to uninstall it due to some reasons such as buggy Stylus recognition, annoying otg wakelock and disk space hungry.
With a clean installation of Windows 10 Pro the tablet works absolutely great without any issue, even better than how it was with the original Windows installation.
Alberto96 said:
Android is easily customizable and partially pre-rooted. (adb runs already as root and you can push files to system without having to manually root the system). I had to uninstall it due to some reasons such as buggy Stylus recognition, annoying otg wakelock and disk space hungry.
With a clean installation of Windows 10 Pro the tablet works absolutely great without any issue, even better than how it was with the original Windows installation.
Click to expand...
Click to collapse
Sorry to hear that you have uninstalled Android, I was hoping that you could provide info about its implementation on the X16. I really love Android and I think I can't live without it...
Now that you have made a clean installation of Windows 10, does the system still have the thermal throttling issues described in TechTablets.com?
Looking forward to learning interesting stuff from you.
ariadnejro said:
Sorry to hear that you have uninstalled Android, I was hoping that you could provide info about its implementation on the X16. I really love Android and I think I can't live without it...
Now that you have made a clean installation of Windows 10, does the system still have the thermal throttling issues described in TechTablets.com?
Looking forward to learning interesting stuff from you.
Click to expand...
Click to collapse
I don't have enough time to support Android also on this device (as you can see, i'm already supporting other devices) so it was useless for me.
About the throttling issue, it seems that CPU doesn't throttle a lot now. Unfortunately on Windows (it should be Driver related) CPU gets throttled at just 85C, while on Android at 90C. That's what makes Windows a bit slower while running CPU/GPU Hungry software.
GeekBench 3 Benchmark Result (run on low battery, 22%, without charger): https://browser.primatelabs.com/geekbench3/4665547
Do you know how to enter the UEFI? Is a USB keyboard needed? I would like to be able to boot from a pendrive and backup the system with Clonezilla
ariadnejro said:
Do you know how to enter the UEFI? Is a USB keyboard needed? I would like to be able to boot from a pendrive and backup the system with Clonezilla
Click to expand...
Click to collapse
You just need to press (multiple times is better) the DEL key as soon as the Tablet turns on. You can use the Keyboard Cover if you have one or a USB Keyboard to get into it.
Hey thanks for this thread I picked up one of these tablets early on Dec. I was wondering if you know howhow, if all possible, to resize the windows / android partition ?
EGM92 said:
Hey thanks for this thread I picked up one of these tablets early on Dec. I was wondering if you know howhow, if all possible, to resize the windows / android partition ?
Click to expand...
Click to collapse
It is possible but i have removed Android so i won't be able to help you for now.
Alberto96 said:
It is possible but i have removed Android so i won't be able to help you for now.
Click to expand...
Click to collapse
Thanks for the reply. If I could run an Android emulator to run the few apps I use I'd use the tablet exclusively with Win10. Do you have a guide on how to remove android and just windows 10?
Also have you experienced graphics drivers crashing on a fresh install of win10? I get it nearly every boot where when windows boots up to the desktop the screen goes black then after a couple of seconds it tells me the graphics drivers have recovered from a crash.
EGM92 said:
Thanks for the reply. If I could run an Android emulator to run the few apps I use I'd use the tablet exclusively with Win10. Do you have a guide on how to remove android and just windows 10?
Also have you experienced graphics drivers crashing on a fresh install of win10? I get it nearly every boot where when windows boots up to the desktop the screen goes black then after a couple of seconds it tells me the graphics drivers have recovered from a crash.
Click to expand...
Click to collapse
How-To Remove Android:
- Prepare a bootable USB Stick using your preferred Windows 10 distribution. (Rufus works fine on UEFI systems)
- Boot from USB (you can use built-in Windows Settings to do so - UEFI Firmware Settings - or you can manually switch to the BIOS menu by pressing the DEL button immediately after you turn on the tablet)
- When you reach the "Install" screen do not proceed. Press SHIFT + F10. A command prompt window will be opened.
- Execute these commands "diskpart", "select disk 0", "clean", "exit".
- Close the command prompt window.
- Well Done! You have successfully wiped your eMMC You can now proceed the installation. You won't see any partition now and the installation process will create new windows partitions for you.
I'm experiencing some crashes too, but not on every boot. It happens so rarely that sometimes i forget about it. Current BIOS isn't completely stable, so we have to deal with it and wait for Teclast's "magic".
Thanks for the help I'll try it this evening. About the firmware updates I only see the teclast app on the Android side, is there a Windows equivilant for updating the firmware?
EGM92 said:
Thanks for the help I'll try it this evening. About the firmware updates I only see the teclast app on the Android side, is there a Windows equivilant for updating the firmware?
Click to expand...
Click to collapse
Unfortunately no.
Alberto96 said:
Unfortunately no.
Click to expand...
Click to collapse
Damn. This is my first Chinese tablet. Have you dealt with teclast much? Are they good at releasing fixes / updates or even kernel sources?
EGM92 said:
Damn. This is my first Chinese tablet. Have you dealt with teclast much? Are they good at releasing fixes / updates or even kernel sources?
Click to expand...
Click to collapse
This is my first Teclast (and Chinese) tablet too.
Hi, how can windows clean install ? I have delete windows Partitions include the MSR Partition.
now i got an error after start install like wrong format ? it is possible to install windows new without delete android ?
toniq1 said:
Hi, how can windows clean install ? I have delete windows Partitions include the MSR Partition.
now i got an error after start install like wrong format ? it is possible to install windows new without delete android ?
Click to expand...
Click to collapse
You can't. I have already tried.
New driver package is up! Enjoy
Alberto96 said:
You can't. I have already tried.
Click to expand...
Click to collapse
Thats wrong.
After i have delete all windows system ,Recovery partitons and the MSR.
then its possible to install windows 10 cleanly from USB Stick without a error.
but after that, the Tablet boot only in Windows.
I go into Bios, Change OS typ to Android, and voila, the dualbootask open.
it works great by me.
Related
Android x86
there are several developers working on this project there is a source for what they have so far, that said ill link in a sec. this is a tutoral of how ive managed to get this far in android x86 ive got most of root working on various builds let me state that i am using a acer aspire one 532h 2588! i am currently running RC2.1 by314
For root you must be on ext3 to get it working although it will still run in ntfs and you will be able to read windows usb drives ext3 you cant the con to ext3.
http://www.youtube.com/watch?v=JfWb_h96_-Q&feature=youtu.be
YouTube how to
-Dev Links-
http://source.android.com/
http://code.google.com/p/android-x86/
http://tabletsx86.org/
http://www.android-x86.org/
http://android-x86.sceners.org/en/
http://www.android-x86.info/
http://www.ceh-photo.de/blog/the ones here work for more computers, just saying! http://www.ceh-photo.de/blog/?p=562 BETA 4
-Needed-
2g min usb for installation of iso
i used a external hdd, you can use a usb drive 4g min i would say, or you can install on os hdd but do not format it!
lili usb creator - http://www.linuxliveusb.com/en/home
minitool partion wizard - www.partitionwizard.com
-steps for live testing-
1) use lili usb creator to install the iso onto a 2g min usb
a) select the RIGHT usb drive lol
b) then select the iso that your going to test
c) i personally only have format the usb selected but you can install the other crap but i dont lol
d) click the lighting bolt to start click the oks lol
2) insert the usb with iso on it, to your laptop with it off
3) start the laptop into the boot options (f12 for me) select the usb with iso
4) click run live...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TEST EVERYTHING YOU CAN, root hardly works here and no data is saved...
-steps for installation-
1) format your usb or hhd partion with minitool partion wizard to either ext3 (most root availible) or ntfs (for use with usb drive ?music?)
2) use lili usb creator to install the iso onto a 2g min usb
a) select the RIGHT usb drive lol
b) then select the iso that your going to use after tested for the best one
c) i personally only have format the usb selected but you can install the other crap but i dont lol
d) click the lighting bolt to start click the oks lol
3) turn your laptop insert the usb with the iso and the usb or external or even the internal if you want to do something crazy but you will format your windows or stock os! i use a external hdd as in my vid..
4) start your laptop enter your boot options (f12 for me) select the usb with the iso
5) select to install
a) select the partion that you set up earlier (if you dont see it detect devices ext3 = linux)
b) choose to format (i format to the format i set it for you dont have to...)
c) yes install grub (if installing to external you dont have to install grub but i do for debugging and to get to windows without unpluging)
d) yes install windows if your installing on a windows hdd
e) reboot (as soon as you see your bios you can remove your usb if your dont you will get error 17)
And now your running android ics on your laptop/netbook/pc
I didnt develop any of this! just trying to get it out there for others
thanks button is nice but not nessary
Acer Aspire One 532h Android x86 ICS RC2.1...
Nice tutorial, thanks!
MEHH lol i thought there wasnt a comment yet lol oh well i need to modify it
Acer Aspire One 532h Android x86 ICS RC2.1...
http://forum.xda-developers.com/showthread.php?t=1973492
Android x86 tut
LOL awesome
XML
Nice man
Sent from my SCH-I500 using Tapatalk 2
Awesome
Sent from my PG86100 using xda app-developers app
You should probably mention that the android x86 builds are generally limited in their hardware support.
lambstone said:
You should probably mention that the android x86 builds are generally limited in their hardware support.
Click to expand...
Click to collapse
Thanks that's why I say test before you install it. The link with green next to it is Chris's blog his runs on more than the rest
Fascinating AOKP Jelly Bean Milestone 1 Devil 1.8.1...
I am confused.
I'm trying to download LiLi. I click on the download link here but it takes me here. Clicking the "Download LinuxLive USB Creator" in the second link takes me back to the first.
Am I not clicking the correct link?
Will this be Mac capable? Also, I am running Intel Centrino2, no support for us?
I am writing this from Andorid on my laptop.
Very cool.
sebouh00 said:
I am confused.
I'm trying to download LiLi. I click on the download link here but it takes me here. Clicking the "Download LinuxLive USB Creator" in the second link takes me back to the first.
Am I not clicking the correct link?
Click to expand...
Click to collapse
Yes you are
BlueEditionE6 said:
Will this be Mac capable? Also, I am running Intel Centrino2, no support for us?
Click to expand...
Click to collapse
On that I have no idea I'm trying to get as many developers as I can to help out I'm about to try to compile a newer version if I can get my PC you repo everything it lost net last night and can't get it to restart or catch up idk what to do
Try beta 4 its your best bet
Sent from my SCH-I500 using Xparent Cyan Tapatalk 2
Thank you so much for this guide and these links, i have installed android on my dell laptop and its working perfect, haven't tested everything but everything i have tested so far seems to work great.
Nice job! Got it running on my laptop just fine. I wonder if it will work on my desktop?
shelby04861 said:
Nice job! Got it running on my laptop just fine. I wonder if it will work on my desktop?
Click to expand...
Click to collapse
Beta 4 runs on my amd Asus machine but my wifi adapter doesnt. can anyone help me compile a recovery for computers
Sent from my SCH-I500 using Xparent Cyan Tapatalk 2
The WiFi is kinda weird but I haven't really looked into it too deep. It will not connect to my home WiFi network but it will to my neighbors and my cell phone. Go figure. I have been trying out different iso images from the many downloads but I can't fins one yet that will boot on my old dell dimensions 2400 desktop. One of the error messages that pops up is for the computer model check and of course it fails, among other things. If anyone knows of a download for an iso that will work on at least dell desktop computers, let me know.
If it's broken...beat it into submission until it works!
Kaptinkrunk said:
Android x86
there are several developers working on this project there is a source for what they have so far, that said ill link in a sec. this is a tutoral of how ive managed to get this far in android x86 ive got most of root working on various builds let me state that i am using a acer aspire one 532h 2588! i am currently running RC2.1 by314
Click to expand...
Click to collapse
NEED HELP
I installed in the 5gb ext3 partition i created for the ICS, installed grub. But when I try to run it after installation, i end up with a static screen,
ok, linking youtube video doesnt work for me as well, so heres the link http://www.youtube.com/watch?v=dfH2zDcX0kA
anyone can help?
Also, it screwed up my Win7, wont allow me to boot, when i try to recover the Win7, the reboot process kept getting interrupted by GRUB, anyone can help me with that? Now I am without a computer.
Blue
Thanks for sharing Android x86 tutorial for every android developers for better solution. I appreciate your way.
BlueEditionE6 said:
NEED HELP
I installed in the 5gb ext3 partition i created for the ICS, installed grub. But when I try to run it after installation, i end up with a static screen,
ok, linking youtube video doesnt work for me as well, so heres the link http://www.youtube.com/watch?v=dfH2zDcX0kA
anyone can help?
Also, it screwed up my Win7, wont allow me to boot, when i try to recover the Win7, the reboot process kept getting interrupted by GRUB, anyone can help me with that? Now I am without a computer.
Blue
Click to expand...
Click to collapse
Try booting a Win7 Setup DVD, then hit repair and proceed with following what shows your on screen.
white-energy said:
Try booting a Win7 Setup DVD, then hit repair and proceed with following what shows your on screen.
Click to expand...
Click to collapse
It wont let me repair, since repair requires reboot, but then GRUB kicks in everytime i reboot, therefore stuck. I popped in the cd and reinstalled Windows.... but lost every program,
this is a bit off topic, but how can i restore everything from my old win7 to my new win7? I tried using the comand prompt in the recovery page, but the programs are still missing, tried just copy and pasting from windows.old folder to current windows folder, no luck.
Hi community,
I own a Toshiba Encore 8 and I am very happy with this machine, as it has a very powerful GPU. It runs games better than my notebook which has a Intel Core i5 (CPU)...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since a long time ago I am searching for a way to run Android on it, because I want it mainly for gaming, and not work.
And before you post something like: "Put Bluestacks on it", here's my answer: Bluestacks EMULATES Android and so it runs slower than normal and it eats a huge amount of battery in a short period of time. And beside that, it doesn't want to go in fullscreen on my tablet. So please, don't post that.
I have found on the Internet, that the tablet IS capable of running android (In x86 mode)...
The tablet has an Inte Atom processor and therefore are much images on the Intel Website that I could download (https://01.org/android-ia/downloads). That's not the problem.
The problem is that when I flash a image to a stick, it won't recognize it when in UEFI BIOS.
I have tried many many sticks and external drives and no one worked. 4GB (3x), 8GB, 32GB (2x), 500GB, 1TB....
I also have tried many programs to flash those images and normal ISO files, like RUFUS, YUMI, WIN32IMAGER, UNETBOOTIN, etc...
(I've tried DD-Images from Android, X86 Android ISO Images, Ubuntu 14....)
The problem is that when I turn on the tablet and hold VOL+UP + PWR, it doesn't recognize the stick at all. When I select the stick (that has a empty description), it normally boots Windows 8.
I already have disabled Secure Boot, I already have toggled EHCI and XHCI mode, I already have turned BitLocker off, I already have upgraded the BIOS... Nothing helps...
Aaand, I already tried in Windows to select to boot from a drive... It restarts the machine, pops a UEFI message up saying that there are no drives and then it boots Widnwos 8...
Here are some pics of the problem:
Any solution will be very greatly appreciated. I'm sure that I am not the unique that want to put Android on that machine
Thanks in advance
I have the same tablet (WT8-A-102). I have tried many images from Android-X86 and have not had any problems to boot them from USB. You must use an UEFI image to be able to boot from USB. I have used different USB sticks and usually Rufus to create a UFEI bootable USB stick.
Most of the images I have tried (both Android 4 and Android 5) boot correctly but dont have support for WiFi and only shows image on external monitor. The image for T100 works best for me with image on tablet, sound, touch etc working but WiFi and physcal buttons are not working.
I have also tried AmiDUOS on the Encore. It emulates Android but is quite fast. The amout of free memory is a limitation with this solution.
dan_dv said:
not had any problems to boot them from USB.
Click to expand...
Click to collapse
How have you done this? I will greatly appreciate any instructions
I have already tried to toggle between GPT/MBR layout on Rufus and it won't recognize.
It would be very cool, if you could say which image on which site to download and which configurations that I should use on Rufus.
Thanks
I compared your screenshots with my Encore.
Boot menu Picture: If I don´t have an USB stick or an USB stick that is not UEFI bootable, my Encore looks like your screenshot. If I have an UEFI bootable USB stick, it will display name after (USB Memory: KingstonData Traveler 2.0).
BIOS settings Picture: Identical (I also have turned BitLocker off but I dont know if it is necessary.
Software that I have used to make bootable USB sticks:
sourceforge.net/projects/win32diskimager
I use version 0.9.5 for writing .IMG files to USB stick. No settings, just select image file, USB stick and write.
rufus.akeo.ie
I used Version 1.4.12 (Build 535) to write .ISO files to USB stick. Settings are "MBR for BIOS or UEFI", "FAT32", "4096".
I think the best image for Encore is the one for Asus T100 "android-x86-t100.img" from Android-X86 discussion group. Most of the images work, like "android-x86-4.4-r2.iso" but after boot, the image is sent to external monitor.
I have NOT found any image with working WiFi in Android yet, if anyone knows one, please post a link.
The images that you download must be 32 bit UEFI to be bootable on the Encore.
(New to this board and not allowed to post links yet).
dan_dv said:
I have NOT found any image with working WiFi in Android yet, if anyone knows one, please post a link.
Click to expand...
Click to collapse
If this works, I will compile my own Android Image to work with Wi-Fi... And, of course, post a link here (If it worked)
(I already have done stuff like this before...)
I will try with this instruction that you gave me. If it works, I will post here more detailed instructions (with printscreens)...
PS: I have just seen that you are freshly new in the forum. Welcome to XDA
Hi,
I have tried to put that IMG File with Win32DiskImager and IT WORKED! ( Thanks )
But, it won't boot complete...
Here some images what happened:
And then, the screen went black... And nothing happens.... nothing at all....
Have you found a image that runs the image on the internal dispay? If yes, which?
It might have the same issue Venue 8 Pros have. KMS doesn't initialize properly if it's not booted through the boot menu (if it is, GRUB will be run at the wrong resolution, and KMS is then fine).
I'm reading some (complex) tutorials to discover how to build a own Android Image based on a existing one...
First I am trying to find the image that works best for that tablet, after that I will try to modify the image...
If anyone already know which image works best, let me know... (Maybe T100?)
EDIT: I already have "disassembled" the squashfs in the img...
Wish me luck now
EDIT2: Seems that I am looking on the wrong side. Maybe @AntaresOne can help me.... Maybe...... Or just point me in the right direction....
I think the problems with no output on screen is related to the display driver. I get the same with many images (they boot and show text based information). When they switch to graphical information (the Android logo) the screen turns black. If you have an external monitor attached to your Encore (connected before you boot the USB stick), you will see Android boot and can control it from touchscreen (dfficult) or with keyboard/mouse in full HD (if your monitor supports it).
I think Asus T100 also have the option for external display and the image found here will display on Encore screen:
groups.google.com/forum/#!topic/android-x86/FUiFCtrgc6I
docs.google.com/a/android-x86.org/file/d/0B5bbP1aYGPSTTTJtTjB5UWNCd3M/edit?usp=drive_web
Alternate, search for "An update image for ASUS T100" on Android-X86 diskussion group.
I have no Linux knowledge so I have not compiled or modifyed anything, just tried images other made.
@AntaresOne doesn't want to help (He was online since the last days and I believe that he have seen this thread). He is a great guy, but I don't know why he doesn't want to help....
But anyway, I think I must post other thread in the Android Section... I can't resolve this by myself.
Fusseldieb said:
@AntaresOne doesn't want to help (He was online since the last days and I believe that he have seen this thread). He is a great guy, but I don't know why he doesn't want to help....
But anyway, I think I must post other thread in the Android Section... I can't resolve this by myself.
Click to expand...
Click to collapse
Hi Fusseldieb, I didn't check xda notifications ><"
I can surely help you, PM me when you're ready
Inviato dal mio GT-I9505
Interested in how this works out, also have an encore 2
Hey! Have any news?
Many Baytrail builds at android-x86.org works with Toshiba Encore (I have WT8-A version) but not 100%. An example is "Asus T100-TA Magic Stick" (check the "win-8-development" in this forum). On most builds I have tried, the WiFi is not working. With the "Magic Stick" version on the Encore, you can use WiFi (and all apps I have tested works fine). The problem with "Magic Stick" on the Encore is that the image is sent to external display (you have to have an external monitor attached to HDMI on the Encore). There are builds that work with internal display but I have not found one build that have both internal display and working WiFi on the Encore.
dan_dv said:
Many Baytrail builds at android-x86.org works with Toshiba Encore (I have WT8-A version) but not 100%. An example is "Asus T100-TA Magic Stick" (check the "win-8-development" in this forum). On most builds I have tried, the WiFi is not working. With the "Magic Stick" version on the Encore, you can use WiFi (and all apps I have tested works fine). The problem with "Magic Stick" on the Encore is that the image is sent to external display (you have to have an external monitor attached to HDMI on the Encore). There are builds that work with internal display but I have not found one build that have both internal display and working WiFi on the Encore.
Click to expand...
Click to collapse
Could you tell me which build is working on INTERNAL display?
THis one from android x86 project working only with external.
Guys - any updates/progress with this project?
Hi, I am also interested in this project. Have the OP been successful with the WIFI molding stuff?
tkgcmt said:
Hi, I am also interested in this project. Have the OP been successful with the WIFI molding stuff?
Click to expand...
Click to collapse
No, sadly I couldn't find a image with all drivers. Anyone interested should build a image for this tablet. I already lost my faith on putting android on this.
I use the latest Android-x86 4.4-r5 (KitKat-x86) from Android from "www.android-x86.org".
WiFi, sound, graphics etc works. I have not tried Bluetooth (I use keyboard/mouse with USB hub) and some hardware buttons do not work (you have to control volume from "settings"). It is fast and stable and all apps I have tested worked fine.
There is one big problem with this build (and many other):
Your Encore must have an external display connected to HDMI port (I guess external display is default and I dont know how to change it). Maybe some parameter in grub?
There are other Android builds that work with Encore internal display but the ones I tried did not have working WiFi.
Hi! I have the same tablet and I want to install Android on it, Android 6.0.1 to be more specific. I tried the live version, but the image was transferred to an external monitor and the Wireless card wasn't recognized. Will it do any differece if I would install Android and not just try a live version?
I found that it's very strange that there's no thread on XDA for this superb popular tablet.
This tablet is the most talked about among the Chinese, Vietnamese and Japanese tech nerd because of it cheap price.
It's the cheapest Windows Tablet at USD70 shipped to whole world, and USD48 factory price.
Official site:
http://en.ployer.cn/product-details-66.html
Spec:
Display:
7 inch (16:9) IPS or TN screen, Resolution: 1024*600
Capacitive touch panel, supports 5 points multi-touch
CPU:
Quad-core Intel Atom Bay Trail Z3735G, Speed: up to 1.83GHz
RAM & Memory:
1G RAM, Built-in 16GB Memory
Supports external Micro-SD card, 32GB Max
System:
Microsoft Windows 8.1 with Bing
Wireless & Network:
Wi-Fi: Built-in Wi-Fi Module, IEEE 802.11b/g/n
3G: Supports external USB 3G Dongle
Camera:
Front camera: 0.3 MP
Videos:
Supports 1080P Video
Battery:
2,500 mAh
Picture (Windows 10 in making):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More pictures: https://www.google.com/search?q=mom...ChMI2ZXqhrSHxwIVDAOOCh3Ipgbw&biw=1366&bih=602
My goal here is to totally clean the 16GB emmc and clean / fresh install it with Windows 10 Home with compression to save space.
I will post my progress on the second post (SUCCESS!).
If any of you guys have this tablet and wanna try, I have attached the working drivers for this tablet that you can download below
Steps to repeat what I've accomplished:
- Charge full the tablet.
- Full reset existing Windows 8.1 with Bing x86
- Connect to internet, make sure the tablet is activated.
- Charge full the tablet again.
- While connected to the internet, do an in-place upgrade of it's existing Windows 8.1 with Bing x86 to Windows 10 Home x86 (from an iso in a thumbdrive) (This step is important! It make sure your Windows stay activated)
- Make sure all hardware is working and have correct driver and Windows 10 is activated
(connected standby seems not working very well)
- Charge full the tablet again.
- Insert Thumbdrive, Keyboard, Mouse into USB hub then insert to the tablet.
- Restart the tablet while holding down the shift key / or open Settings, and click/tap on the Update & security icon, then click/tap on Recovery on the left side, and click/tap on Restart now under Advanced startup on the right side.
- The tablet will reboot and you will see the Advanced Startup Options screen.
- From here click Troubleshoot then Advance Options then click Command Prompt.
- From command prompt, type d:/setup.exe (where d:/ is your thumbdrive letter).
- You should then be in the Windows Installer setup screen. This should be exactly the same as booting from USB.
- Follow the setup wizard to do clean install, you will see 5 partitions.
- First 2 partitions (System , EFI) you should LEAVE it, do not delete it.
- Delete the last 3 partitions (C:, Recovery and another Recovery)
- Choose to install Windows on the free space that you got after deleting the last 3 partitions. (No need to manually create a partition).
- Let it install normally, once done you will have C:/ or around 14.45GB.
- It will detect as a normal desktop, but once you install all the drivers on the first post, you will have a fully working tablet again.
Tips to save more space:
1) Use CompactOS:
From an administrative command prompt, simply use the commands:
Compact.exe /CompactOS:query This will query Windows to see if CompactOS is enabled or not
Compact.exe /CompactOS:always This will enable CompactOS
Compact.exe /CompactOS:never This will disable CompactOS
2) Disable hibernation.
3) Decrease pagefile size.
I have around 7GB free space on a fully updated Windows 10 Home installation even with default pagefile and hibernation turned on.
bro what software do you use to restore and backup the driver?
Nice Thread. Just what i was looking for!
How did you Update?
I tried via .iso on a USB drive.... did not work...
Great Job M$ did there -.- can't even see the full installation window.
(Attachment 1+2)
But well.... that's not the main problem here... it needs 6.27gb free space on C to install Windows 10 ~.~
(Attachment 3)
i still have my 4gb image partition....
Now trying the inplace Upgrade....
P.S About Drivers....
http://woshub.com/how-to-export-drivers-using-powershell-in-windows-8-1-u1/
Here are mine on Google Drive:
drivers_Momo7W.zip
drive.google.com
Also made a Macrium Reflect Free Recovery Disk and saved the img on a USB drive... you never know.
Btw, i also got that error about USB not activated via BIOS. Did you also use a USB 3.0 stick? Heard that there are some driver problems with Windows10 installation and USB3.0
Edit:
Well... inplace upgrade also fails -.- needs 5gb more space.
(Attachment 4)
Edit 24.11.2021.
****ing Google drive changed the link.
Replaced it. Got about 2-4 emails per Week askig for the file. Should work again now.
i did it.... phew....
Skipped the 6.67gb limitation by selecting a USB drive as backup for the old windows... though didn't even use it in the end -.-
So i have now 6.6gb Free of 14gb.... oh yeah... and the 4gb image partition got deleted during installation.
The worst thing was the Touchscreen driver, because i did not update but delete all i also deleted Touchscreen drivers.
Touchscreen readme.txt insider the driver package said:
- Copy "SileadTouch.fw" to "C:\Windows\System32\Drivers"
- Update the driver "KMDF HID Minidriver for Touch I2C Device_15.46.55.386_6.2_x86"
Click to expand...
Click to collapse
Make sure you have a USB Keyboard or Mouse for the initial Setup and to install the drivers.
I installed VNC really fast and did all via PC ^^
Haldi4803 said:
i did it.... phew....
Skipped the 6.67gb limitation by selecting a USB drive as backup for the old windows... though didn't even use it in the end -.-
So i have now 6.6gb Free of 14gb.... oh yeah... and the 4gb image partition got deleted during installation.
Click to expand...
Click to collapse
Strange, I only have 2.5GB of free space doing exactly what you doing when I upgrade.
But the 4GB recovery partition is not deleted.
I'm still trying to find a way to boot from USB to do a clean install.
i used the .iso on a USB stick, mounted in windows and started the setup.
Btw, i can see your problems with Connected Standby....
SleepStudy
BatteryReport
Tough it was already horrible in windows8.1 so i never used that, and always turned off my device
Anyone else here has Stats from W8.1 times ?
Unfortunately I have no way of downgrading because I cannot boot from USB...
Tried the Windows 10 recovery menu to boot from EFI USB device also cannot.
shouldn't there be a "Restore Windows to previous state" ? or did you already clean the disk and deleted "old windows installations" ?
Haldi4803 said:
shouldn't there be a "Restore Windows to previous state" ? or did you already clean the disk and deleted "old windows installations" ?
Click to expand...
Click to collapse
Yes, it restored back to Windows 10 Home.
My C:/Windows.old is less than 1MB.
I have no idea why this happened to my upgrade.
I'm trying to download the 5.7GB recovery file from Ployer website since a week ago but the speed to me is only around 5kb...
I believe this recovery file should be able to restore the tablet back to the original Chinese Windows 8.1 with Bing.
Linux
I dont know about you guys, but Personally, I would like to install linux on mine, but i still dont know whether it will support it. i have downloaded the iso for Kali linux and i plan to install it soon, but sadly, i cant seem to even reach the boot menu.
I think it would be nice for me to have a portable linux wireless tool, well if i can install it.
if anybody hass managed to install any linux distro on the ployer momo7w, please i would like to know how you got past the very fast boot screen, and into the bios.
How are you getting on with this?
I am just preparing to do the same upgrade... Amongst other things, the chinese writing, mid English Windows is driving me mad!!!
Have you managed to get everything up and running yet?
I have managed to get a few things sorted on this... Since you can only get it wrong once and its all over (and I nearly did!) I have managed to get USB booting, and I have also backed up the existing drivers on Windows 8.1, with a hope that in the worst case scenario (and I cant find the drivers for the touch screen!) I am hoping that I can send it looking through the backed up drivers and put it to use with windows 10!
So I am currently biting my fingernails, as I have been backing up for about 2.5 hours, and I have 18 minutes left, and I am hoping the battery holds out for the complete backup (Using Macrium on a live USB to do the backup!)
I will see how it goes, but happy to help you guys get your devices booting to USB if you want!
Running into issues! I can get a USB disk bootable, as I managed to back up from a UEFI USB, but now, I cannot build for love nor money - a Windows 10 installer UEFI USB! RUFUS, SARDU, none of them seem to be able to make it work
Got a bit more work to get done! I might event get a solution, but the way the ployer UEFI is setup, its missing some key settings in the UEFI, which without (CSM) we may not be able to clean install!
managed to get the new installation done, you will need a mostly charged tablet, a USB adapter cable, I would recommend a four port hub - one for a mouse, and one for your USB drive with the windows installer on it.
I am happy to share my BIOS settings so you guys can reproduce it! I am waiting for the install to finish and I will run all the drivers installations through, then I can try get the touch screen up and running with my backed up drivers! Hopefully a nice, clean (all English!) installation! I get driven mad by the recurrent chinese words throughout my OS, even though its set to English!!!
tell us about the storage used and free
I ran into another hurdle!
Got the install completed, but now, it doesnt recognise its a tablet! there are no unknown devices, so I cant install the drivers, the start button and the volume buttons do not work
---------- Post added at 12:50 PM ---------- Previous post was at 12:49 PM ----------
I will take a look in an hour or so and let you know!
---------- Post added at 12:59 PM ---------- Previous post was at 12:50 PM ----------
4.88GB of free space out of 14GB drive, but there are so many problems with drivers missing, cant see the accelerometer, touch screen, soft or hard keys, I am thinking I might just wipe it and start again...
Right, I am going for a new approach!
I am using the inbuilt UEFI recovery function, and have just reinstalled the OS, looks like its probably Windows 8.1, but what I will then do, is try reinstall, telling it to leave my files. This may sound crazy, and isnt strictly speaking a "Clean install", however, after a clean install of windows 8.1 and an upgrade to windows 10, this should be the best that can be accomplished, without having driver issues everywhere!
I will keep trying and let you know how I get on!
....EDIT... seems its just reinstalled windows 10! looks like I will have to pull out my backups and reload the tablet!
help
Hi
I also bought one of these tablet.
I would like on Windows 10 were installed, but no way to succeed.
I read the forum, but unfortunately I do not know English well.
I live in Hungary.
I can not enter BIOS. I connected a wireless keyboard + mouse pressed esc, but not having been in the BIOS.
If I bought the írásotokból, USB can not be reinstalled?
Or, if you do not clean installation somehow manages to put even works with touch screen, volume keys, gyrosensor?
There are very few places on the device ... In practice, in addition to other Windows programs can not be installed. It would be nice if bootlna USB cancel the recovery partition!
It is very annoying that some Chinese characters in the windows, and do not even like 8 system
Thank you!
PS: I wrote google translator, I hope you understand
Lipothp
I am still working on the clean install... Read on for more details.... Unfortunately it's all not going to work very well....
So I reinstated windows 8.1, tried to boot and it failed, as such I reinstalled windows 8 through its recovery tool, though I probably won't be able to do that again.
Anyway, I'm stuck now, got 5.3gb of free space and that's it. I can't progress as I can't claim more disk space. The recovery partition is more than just recovery it is actively used by windows... So if you delete that partition, Windows dies. If you try to move windows folder it will die.
The next challenge is to try move the users directory and hope it works it won't thought. Even compressing the disk space does nothing...
Lipothp, I would suggest you get a wired keyboard and connect to your tablet, go to settings, recovery, advanced and reboot. When it comes up go to troubleshoot and then the option is there for bios.
Seriously it's taken me a week to upgrade and still no closer to having everything working.
This 2 in 1 Laptop has a flexible design which lets you use it as a laptop, tablet, presentation screen, etc. The laptop supports dual boot, one is Windows 10 and another one is Android Lollipop v5.1. Intel Atom processor ( Z3735F ) is installed in this laptop to deliver matchless performance. With 2 GB RAM, smooth and lag-free real-time execution of program becomes possible. This entertainment laptop has 32 GB eMMC storage capacity to store all the needed documents, favourite multimedia files, and also to install essential software. The notebook has 25.65 cm (10.1) Touch screen to assure wonderful movie watching experience and smooth navigation. Datamini is a pioneer name in the segment of computers and laptops manufacturing. Also, the brand has a host of service centres across India. -> (Datamini Windows Tablet)
SnapDeal : Datamini TWG10 2-in-1 Dual OS
Amazon :Datamini TWG10 2-in-1 only Windows
Shopclues : Datamini TWG10 2-in-1 Dual OS
Datamini Service Center :
Contact Number : 00912240053782
Email : [email protected]
Pick Up Coordinator (Any where in India) :
Name : Satish
Contact Number : 00919599685653
Email : [email protected] (Renu Gupta)
Email : [email protected]
Notice : All Datamini Service is done by Aforeserve Company only .
Datamini TWG10 Spare Parts & Accessories :
Screen Guard Scratch Protector
Bags with shoulder strap
LCD Screen for Datamini TWG10
Housing for Datamini TWG10
Touch Screen for Datamini TWG10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specification :
OVERVIEW :
Brand Datamini
Type 2 in 1 Laptop
Utility Entertainment
Color Black
Model Number TWG10
Click to expand...
Click to collapse
PROCESSOR :
Processor Name Intel Atom
Variant Z3735F
Processor Brand Intel
Clock Speed 1.33 GHz Up to 1.83 GHz
Cache 2 MB
Click to expand...
Click to collapse
MEMORY :
RAM 2 GB DDR3L
STORAGE :
Storage Capacity 64 GB (32 GB Inbuilt and 32 GB Micro SD Card)
Click to expand...
Click to collapse
PLATFORM :
Type Dual Boot
Operating System Windows 10+Android Lollipop v5.1
Click to expand...
Click to collapse
DISPLAY :
Screen Size 25.65cm (10.1)
Resolution 1280 x 800 Pixels
Screen Type IPS Touchscreen
Click to expand...
Click to collapse
GRAPHIC :
Graphic Processor Intel HD 1GB
Click to expand...
Click to collapse
KEYBOARD/INPUT :
Integrated Camera Yes, Rear Camera - 5.0MP & Front Camera- 2.0MP
Pointer Device Touchpad
Keyboard Standard Keyboard
Click to expand...
Click to collapse
AUDIO :
Internal Mic Yes
Speakers Two Speakers (1W)
Click to expand...
Click to collapse
COMMUNICATION :
Wireless LAN 802.11b/g/n
Bluetooth v4.0
Click to expand...
Click to collapse
POWER & BATTERY :
Power Supply 5V/2A adapter
Standard Battery Li-ion Polymer, 6600Ah
Click to expand...
Click to collapse
PORTS/SLOTS :
USB Port/S Mini USB 2.0 & Standard USB
Mic In Yes
HDMI Port Mini HDMI
Multi Card Slot 3G SIM Slot+Micro SD Card Slot
Click to expand...
Click to collapse
System Properties :
System Information :
BIOS Information:
BIOS of this tablet is made by INSYDE which is UEFI (Unified Extensible Firmware Interface) BIOS Type.
When turn on the tablet , you can enter to Tablet BIOS Mode By Pressing ESC Button .
You will see the Below picture on the screen of the tablet
Click to expand...
Click to collapse
By Selecting BootManager , you can select which system or OS can be booted : Windows , Android and Bootable Software from USB Port using Flash Memory or Pen Drive .
Also From BootFromFlie , you can access to bootable Devices such Pen Drive .
Click to expand...
Click to collapse
BootManager :
Boot From File :
Partitioning of Windows 10 and Android 5.1 on the Tablet :
As you see only 4 GB ROM from 32 GB in built hard Disk is dedicated on Android 5.1 to be installed APPS by user .
How to Install Windows on the tablet ?
1. Find and Download Window 10 home or professional Edition as ISO File
2. Download Rufus to make bootable USB.
3. 8 GB Pen Drive which should be better to format it .
4. Open Rufus which you have Downloaded.
5. Select the Windows ISO file from which you have downloaded
6. Change Partition scheme to GPT Partition scheme for UEFI
7. Press Start button and wait to finish.
Click to expand...
Click to collapse
8. Insert the Pen Drive to the USB slot and restart you tablet
9. Press ESC button
10. Select Boot Manager
11. Select Boot from USB
12 . Install windows 10
Notice : In formating Partition for windows installation only format Drive C , DO NOT TOUCH OTHER VOLUMES
Click to expand...
Click to collapse
How To Install Android X86 on the Tablet ?
1. Download Android 5.1 X86.img for EFI as IMG File
2. Download Rufus to make bootable USB.
3. 8 GB Pen Drive which should be better to format it .
4. Open Rufus which you have Downloaded
5. Change Type of Image to DD Image
6. Select Android 5.1.img from which you have downloaded
7. Click Start Button
Click to expand...
Click to collapse
8. Insert the Pen Drive in USB Slot of the Tablet
9. Restart the tablet and Press ESC button
10. Select Boot Manager
11. Select Boot from USB
12 .Read from HERE To Install Android x86 Step by Step.
Click to expand...
Click to collapse
Pros of Tablet :
Supporting Dual OS
Perfect and Nice finishing
So fast and smooth
It Supports Mini HDMI and SIM cart with 3G
It has 32 GB extra Micro SD card free
It Supports all Apps on Windows 10 and Android OS
High Graphic resolution and sharp LCD
Battery remains for long time up to 9 hours
Cons of Tablet:
No protective guard for LCD
LCD scratches with anything even your fingers
Screen touch is not working properly on windows 10
4 GB is dedicated on Android which is too less
Android doesn't permit to install apps on Micro SD card
So Low Quality of rear and Front Camera
Micro SD card, sometime, is not working on windows 10 Properly
Drivers of Windows 10 for Datamini TWG 10 :
1. Download Drivers from Here
2. Extract the Zip file
3 . search each missing Driver by Device manager into the extracted folder
Click to expand...
Click to collapse
-OR-
1. Download Drivers Package from Here
2. Extract the Zip file
3. Copy and Paste the extracted folders in Windows\System 32
4. Restart your Tablet PC
Click to expand...
Click to collapse
uefi bios
can some one post bios of this tablet.or link to get the dual os firmware
How can i ROOT android version of it. Please help
it is written that 4gb for android ...out of32 gb internal memory only 4 gb ?
micro sd card max memory card we can use ?
shiahling said:
it is written that 4gb for android ...out of32 gb internal memory only 4 gb ?
micro sd card max memory card we can use ?
Click to expand...
Click to collapse
yes , micro sd upto 128 gb
touch screen not working
my tablet is only come with window 10.when i try to reset(become slow) i hang and i restart it by pressing power button but window corrupt.i try to install android in it unfortunately i formatted its all partiotions (windows,windows reserverd and one more ).so after installing android its touch is not working no rotataion.then i install windoe 10 using usb but in windows 10 also its touch is not working .i paste drivers mentioned in above link and updated also from device manager-human interface but nothing works.
please help me without touch my tablet is like dead .
Any luck rooting this tablet. I was able to unlock the bootloader.But no luck with rooting.
flashing android
which partition to select ?
BIOS
Can you provide a copy of bios
support of SDXC cards
just tried a 128 GB sandisk micro sd card in this, device recognises it perfectly.
---------- Post added at 11:23 PM ---------- Previous post was at 11:18 PM ----------
kkk95 said:
my tablet is only come with window 10.when i try to reset(become slow) i hang and i restart it by pressing power button but window corrupt.i try to install android in it unfortunately i formatted its all partiotions (windows,windows reserverd and one more ).so after installing android its touch is not working no rotataion.then i install windoe 10 using usb but in windows 10 also its touch is not working .i paste drivers mentioned in above link and updated also from device manager-human interface but nothing works.
please help me without touch my tablet is like dead .
Click to expand...
Click to collapse
i had the same issue. dont paste the drivers directly to windows folder. open device manager and install drivers for intel HD graphics and I2C touch controller and touch will start working. for rotation need to install bosch accelorometer drivers
Memory problem
I was told Memory 32 GB expandable upto 500 GB. How can it be expanded? It looks there is no room for HDD of 500 GB. Windows 10 was unable to update due to low space ie less than 4 GB, Windows needs 5 GB space.
In Android they gave 8 GB ROM for me. They said 32 GB ROM, atleast I understood in that way. I didn't know Windows 10 also was there, dual boot.
Driver Solution
asdews said:
just tried a 128 GB sandisk micro sd card in this, device recognises it perfectly.
---------- Post added at 11:23 PM ---------- Previous post was at 11:18 PM ----------
i had the same issue. dont paste the drivers directly to windows folder. open device manager and install drivers for intel HD graphics and I2C touch controller and touch will start working. for rotation need to install bosch accelorometer drivers
Click to expand...
Click to collapse
Approach 1 : (recommended)
Download the Driver package and unzipe it your PC then Right click on Start Menu-> Click on Device manager
Right Click on any unknown driver -> Click on Update Driver Software -> click on Browse My computer for Driver software -> Browse the location that you unzip the zip fle ( check include subfolders ) -> click next -> finish -> Restart the tablet
Approach 2 :
copy and paste the inside of driver package ( Drivers folder and Driverstore folder ) to windows-> system32
how to unlock bootloader
bhargav1991 said:
Any luck rooting this tablet. I was able to unlock the bootloader.But no luck with rooting.
Click to expand...
Click to collapse
Please share how to unlock Datamini TWG10 as it is stuckup at entering dnx mode waiting for fastboot command
regards
My hands on experience
Please do not try based on the info available in this site/thread regarding installation of Windows, installation of Android, unless further progress is there because of the following hands on experience.
1) The tablet is manufactured by little known company, hence not much development support can be expected.
2) the company is having only one service center at mumbai, they are not ready to share windows drivers or android files through downloads.
3) This looks like laptop but they say it is a tablet with keyboard, hence it is similar to phone with so many secrete partitions and files.
4) It has UEFI type BIOS only, (No legacy BIOS), it has 32 bit only hardware, it does not popular other hardware chips hence it is difficult to get worked open android OS or windows drivers* . (further I suspect it might have locked Bootloader this is the point i have missed before my attempt)
I have backed up all the 17 partitions and restored back with Easeus To Do back up (so far other image backup software are not even working on this type of environment). I have backed up various methods , as some problem i was anticipating (like Partition backup, Disk Back Up (sector by sector method), System Back up & Disk Clone while it was running OK )
But on requirement , when restoration was done with partition backup (as My windows was not booting , not resetting, not restoring , vendors asks to send it back to Mumbai)
windows problem was not solved but android was intact. when tried System restore, windows problem solved but android not booting, when disk clone restore attempted nothing was booting. when restore from Disk back up was done only windows was restoring. Hence they have locked somewhere.
I have tried to install Android -x86 5x it is 32 bit but not EFI compatible . No other s like 4.4, 6.0 etc is successful (these are installed at c drive, not same as manufacturer provided which hides in some partition )
In view of this , if windows corrupts and becomes non bootable , only Windows 10 32 bit UEFI version may be installed as per the procedure specified at initial [But screen auto rotation does not work, OS Switch is missing but we can go to bios (esc key to be pressed while booting) switch OS-but the may considered minor ]
In my case i have expanded my disk to full 28GB for Windows 10 and backup copy of OS and all imp programs like WinOffice etc & settings are stored (8GB) on my SD Disk of 32GB, which I also made bootable and selectable from BIOS. If any major corruption of windows occurs, as always saves my data on SD card, it can be temporarily removed and important work will be backed up, tablet can be restored in 40 min at click.
UEFI bios reset blind method
After some setting change in advanced video menu the screen blank
To reset / to load defaults we have to follow actual steps in blind method.
Press ESC key when you feel it is starting
Left left enter
F9 enter to load defaults
F10 enter to save
The following mentioned at Cube iWork 10 ultimate dual boot rooting at techtablets
please note that no matter what backup software you use, if you restore the entire disk image (specifically, the android partitions) android will NOT boot anymore. This is because Cube (or rather, their ODM) enabled dm-verity so the system detects that it has been “tampered” and just hangs at boot. to fix that you should reflash the official android image with the files provided by Cube, or use a modified boot.img (see rooting section)
Hey there guys, just wondering if anyone else is having the same issue as me, I have the TWG ces 101, pretty much the same tablet but with a different bios, I am having a weird issue with the touch screen, it worked fine before I nuked windows attempting to install android x86, and upon installing windows again and finally getting all the drivers working again, the touch screen is going crazy, every touch registers as it being somewhere entirely different from where you have touched, some spots on the screen when touched show up as 2 fingers on 2 random parts of the screen etc, I have tried calibrating to no avail as I cant even click where it asks me to, I have tried multiple versions of the driver (which I only found through a driver search program called SDI and right clicking it and searching the part number on microsofts download database (as it came up as unknown device and had no name)
not sure what else to really try...its driving me a bit batty
adex9 said:
Hey there guys, just wondering if anyone else is having the same issue as me, I have the TWG ces 101, pretty much the same tablet but with a different bios, I am having a weird issue with the touch screen, it worked fine before I nuked windows attempting to install android x86, and upon installing windows again and finally getting all the drivers working again, the touch screen is going crazy, every touch registers as it being somewhere entirely different from where you have touched, some spots on the screen when touched show up as 2 fingers on 2 random parts of the screen etc, I have tried calibrating to no avail as I cant even click where it asks me to, I have tried multiple versions of the driver (which I only found through a driver search program called SDI and right clicking it and searching the part number on microsofts download database (as it came up as unknown device and had no name)
not sure what else to really try...its driving me a bit batty
Click to expand...
Click to collapse
I had the same kind of issue. So download the file from here:
.4shared.com/get/Z5OVkZNyba/Drivers_TWG10_.html
Extract the content in the rar file. Using a mouse browse the contents of the folder and open Drivers > HIDClass > KMDF HID Minidriver for Touch I2C Device
Right click oem24 file and select install.
Once done, touch screen will be alright
Firmware file
I need stock firmware file android of this device.I want to flash that firmware.my tab already has android.But I need firmware file.Please send
Ianreal28 said:
Pls could somebody help me i have this 2 in 1 tablet DUAL BOOT after resetting it to factory reset my drivers are all gone no touch, sound etc. So i decided to find drivers i found intel atom z3735f install it and then restart. AND IT RESTARTING FOREVER:crying::crying: when I hardreset my tablet then the windows take too long to boot up.. I think the problem is the i2c controller driver is responsible for forever restarting . i try all methods and it happens the same. Can anyone help me? :crying:
Specs:
Intel atom z3735f
2gb ram
32gb eMMC
Dual boot
Windows 10 home 32-bit
Click to expand...
Click to collapse
My thread:
https://forum.xda-developers.com/android/help/windows-tablet-taking-forever-to-t3727109
U
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wintel W8 Pro Z8300 Mini Pc
I am not responsible for any damage to your device when you are not sure leave the default Settings.
All Tested and 100% Working.
Thread Updated 18/11/2017
CloneZilla Backup+Restore With Free Tool.
2. Create a Windows Boot Usb Flash Drive.
3. Backup and Restore Drivers And (Missing Drivers)
4. Intel Graphics installer + Extra Settings
5. Install Linux Os.
6. Acronis True Image Backup+Restore With Non Free Tool.
----------------------------------------------------------------
**CloneZilla** Backup and Restore (Free Tool)
You need CloneZilla USB Flash Drive And External Drive
Download CloneZilla:
(Select amd64 and .ISO)
Link: http://clonezilla.org/downloads.php
Create a boot Usb-Drive Go to (2)
(Instructions official site )
Tip: Folder name of the created backup is example: (2016-05-09-13.img)
http://clonezilla.org/show-live-doc-content.php?topic=clonezilla-live/doc/03_Disk_to_disk_clone
Clear explanation
http://www.tuxradar.com/content/how-clone-hard-drives-clonezilla
Windows OS
2.
**YUMI** Created a working Windows 10 OS Fat 32 boot usb Flash Drive
Important: Only Install Windows 64 Bit OS
**Disable Secure Boot in Bios**
1. Create Multi Boot Usb Flash Drives
(Run as Administrator)
Upload The Windows_10.ISO (64bit) File in Program select target usb Flash drive and select for windows 10 installer.
After Done Eject
Create Also A Boot CloneZilla Usb Flash Drive.
Boot Windows and Clonezilla On Wintel W8 Pro
plug The CloneZilla Usb Flash Drive in Wintel Pro.
Go to Bios = Power Button Device and then Esc Button on Keyboard
in the Bios of Wintel Pro select / Boot manager/ the Usb Flash Drive
start By Enter.
CloneZilla Backup And Restore procces
folow The Instructions from (1.)
http://www.pendrivelinux.com/yumi-multiboot-usb-creator
http://www.pendrivelinux.com/yumi-multiboot-usb-creator/
Before INSTALL CLEAN WINDOWS
(BACKUP FIRST YOUR DEVICE WHIT CLONEZILlA)
3.
Double Driver Tool:
Clean Windows 10 install and missing drivers ?
(15/05/16 00:41 Updated (NetWork+Audio)
Note: After Restore audio driver: You May Need to Unplug and plug back in The External Audio Jack.
Backup
MediaFire
https://www.mediafire.com/folder/jgvqlaf00x2qd/Wintel
(Recommended Disable Antivirus)
1. Extract 2x Downloaded .rar File
2. Run double driver.exe Run as Administrator
3. Navigate to the backup folder
4. Restore what you Need
(If Need Instructions and info )
http://pureinfotech.com/double-drivers-how-to-backup-and-restore-drivers-in-windows/
Backup your personal driver before changing anything
4.
Extra Settings:
Intel? HD Graphics Version 10.18.15.4256:
https://downloadcenter.intel.com/download/25150
dated : 17/07/2015
Smoother system speed:
1. Right click
2. Click Search
3. type Performance and open Adjust the appearance
2. Disable all and Apply/Ok
Fast Booting Speed.
(**Disable Secure Boot in Bios**)
1. Run msconfig
2. Select Boot
3. Boot time valu = 3
4. Advanced options number of processors 4 + memory 2048
Disable Startup High Label Software Example (Office)
Extra option:
Disable Fast Booting Option in (Power Settings)
1.Choose what power button do.
2.change settings that are Currently unavailable.
3. Disable Turn on Fast Startup.
(Tested With all My installed Software)
Shutdown= (25 sec blue light Off)
Startup= (1 min 04 to 06 sec)
Rebooting time= (1 min 23 sec)
Note: you can still boost the windows with avg tune up (Turbo Mode)
Increase Wifi speed:
Step 1.
1. Select Settings
2. Select Update
3. Advanced Options
4. Shoose How Updates are Delivered
5. Disable the on and off swith
Step 2.
1. Right click on start menu
2 Run gpedit.msc ( if error go to 1 Below)
3. Administrative Templates
4. Network
5. Qos Packet Scheduler
6. Limit reservable bandwith
7. Enable
8. Enter Valu 0 Apply and OK
-----------------------------------------
1. Download gpedit.msc and install
2. Go to
C:/Windows/SysWOW64
3. Search gpedit and
Run As Administrator
4. Go to step 2- 3
Download: https://www.dropbox.com/sh/yeox57kv5wehre2/AABThEyXpFwHSBzdim7JT2e8a?dl=0
Speedtest.net
Second Test Downl= 29.05mb Upload = 3.02mb
On My Basic Network
CoreTemp:
(Protection)
Keep update your Cpu Temp in Taskbar and Set The Degrees Celsius you like for protection auto shutdown
Wintel W8 Pro Have Default Protection on 90 ?C its the max voor this type off intel (but its to hot)
Link: http://www.alcpu.com/CoreTemp/
Free VLC Smooth Default Video Player
http://www.videolan.org/vlc/download-windows.html
Free MSN Weather for your Android Phone (Same Source As Windows 10 Wheather)
https://play.google.com/store/apps/details?id=com.microsoft.amp.apps.bingweather
Intel Info:
http://www.intel.com/content/dam/ww...efs/atom-x5-processor-z8300-product-brief.pdf
Good To Know (save money)
CMOS Battery.
https://youtu.be/5DdAZrTZjEM
Most Populaire v3 CR2032 Battery
CR- lithium battery
20 - 20mm diameter
32- Thickness 32* 0.1 mm
Easy to find on Ebay
Note: i'm not 100% sure of factory built battery !
But should normally work.
6. Linux OS
Ubuntu 16.04.3 LTS 64Bit
(With Linux 4.10 kernel)
http://releases.ubuntu.com/16.04/
important
If You Installing from Terminal or Update Ubuntu,
Always Backup First Your Ubuntu + data , in case something goes wrong.
Currently Version is 16.04.3 LTS (With Linux 4.10 kernel)
Easy Update from command in Terminal see dropbox folder/File link:
https://www.dropbox.com/sh/tb2m0tz62c61ogd/AACtr1iuGfyGx_WM6pMj-tvta?dl=0
Also OSX Theme in Folder
1. install with Terminal
Mac OS X Lion v7 Theme ''Folder''
Extra Software Updated Folder 14.06.2017
https://www.dropbox.com/sh/xk8h30xdho6t8ev/AACG2N4ovoMMysVRp4FmXNk1a?dl=0
Ebay:
Cheap Sound And Wifi Solution
Wifi usb Stick :
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/272898699092
Cheap 100% Working Audio on ubuntu :
Note: Sound is Ok but Poor Quality and unstable
http://www.ebay.co.uk/itm/252631182595
Pluganble sound card stick :
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/182387818160
Note: ( Tested ) Quality Is Very Good !!
6.
Backup Partition With **Acronis True Image** (Easy Non Free Tool)
(Example Screenshot Below)
Website: http://www.acronis.com/en-us/
1. install and burn Acronis.iso with **Unetboot** dont need to select a distribut Burn the iso to Usb Stick
2. Boot in to your bios. with (Esc Button Keyboard)
3. Select Boot menu on Bios Wintel W8 Pro
4. Select your usb drive and enter
5. in Acronis menu enter number 1
6. Select Backup and select all in local linux partition disk
7. Select the destination External Disk, create a folder and name it and start procces.
Time: depends on the writing speed of The Taget Drive.
Acronis backup is Compressed in 1 Bin File. is undoubtedly the best Backup/Restore Tool works with all devices !
Note: If the Backup folder/File you made is Locked on Ubuntu you need Root Acces with Root manager if you want to move or delete the folder.
(Don't worry you need to do this only 1 Time if Need)
In Ubuntu Enter in Terminal:
sudo nautilus
And use the Root Manager.
Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?
balby said:
Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?
(This backup i made is for after a Clean Windows install and missing driver)
All Wintel pro Z8300 Have the same Default drivers
First formated the internal storage (recommended)
Then Install Windows 10 Version ....
by the first Boot you only wil need the sound driver Frome My (Double Driver Backup), and after you done this ,Backup your Windows (CloneZlilla) and
Then update Windows.
For a working Screen you only need to use .exe installer.
Intel Driver Grapich
https://www.dropbox.com/sh/ykj10iqywakgpjs/AADv7-Jm-AOchoNFRFz66Z8Va?dl=0
Click to expand...
Click to collapse
balby said:
Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?
Click to expand...
Click to collapse
tried something ?
If you waint my help !
Hello
i have downgrade the driver and everything works perfectly.
Thanks
balby said:
Hello
i have downgrade the driver and everything works perfectly.
Thanks
Click to expand...
Click to collapse
Okido Nice to Know !
I used "INTEL(HD) driver update utility 2.5"
balby said:
I used "INTEL(HD) driver update utility 2.5"
Click to expand...
Click to collapse
Right win64_154001
hey I didnt have USB on boot menu even if i have usb boot enable, what can i do?
Hi, after a clean installation of win 10, the blue led is not working, is turned off when the Wintel Pro is turned on.
There is a solution?
Thank you and sorry for my bad english.
niro88 said:
hey I didnt have USB on boot menu even if i have usb boot enable, what can i do?
Click to expand...
Click to collapse
**Disable secure boot in Bios**
The Windows 10 boot USB will automatically appear in the boot manager
(Power on hold esc on keyboard and select boot manager select usb drive)
Option 2
try another USB stick
Option 3
Read carefully
Giacomofal said:
Hi, after a clean installation of win 10, the blue led is not working, is turned off when the Wintel Pro is turned on.
There is a solution?
Thank you and sorry for my bad english.
Click to expand...
Click to collapse
have you only installed a Windows 10 /64-bit ?
Try:
-Disconnect The Adapter From the device
If Not working
- Make sure you have WiFi or WLAN
- Reset windows from settings menu
( takes a long time but it will install all drivers available also updates )
Inportant:
1. Alway backup your device before you do anything else
(Rules Not only for the phones )
Wintel W8 Pro Z8300
Hello , I bought the computer and I have tried to change the screen size it shuts down and now it just turns on and off without stopping what can you do ?
77777777777777 said:
have you only installed a Windows 10 /64-bit ?
Try:
-Disconnect The Adapter From the device
If Not working
- Make sure you have WiFi or WLAN
- Reset windows from settings menu
( takes a long time but it will install all drivers available also updates )
Inportant:
1. Alway backup your device before you do anything else
(Rules Not only for the phones )
Click to expand...
Click to collapse
Yes i have win 10 64 bit only, The problem appeared after a clean installation of Windows 10, because the reset from setting menu was blocked. I do not have a backup of the original system.
In your opinion is a driver problem? Because the red led works perfectly.
Thank you.
boot from usb
How did you manage to boot from USB stick to install a fresh Windows?
Same problem here.
Disabled secure boot and tried different usb sticks in 2 usb ports. Boot Manager bios menu does not allow to select an usb external device.
parallaxx said:
Same problem here.
Disabled secure boot and tried different usb sticks in 2 usb ports. Boot Manager bios menu does not allow to select an usb external device.
Click to expand...
Click to collapse
Follow the thread:
Use YUMi and the Right steps
1. Select Usb F drive
2. Win10 ISO File (64Bit)
3. Select windows 10 installer !!
Tested with 4,8,16 gb USB Flash drive 100% Working
If not then you need to use a different USB Flash drive
success !
[email protected] said:
Follow the thread:
Use YUMi and the Right steps
1. Select Usb F drive
2. Win10 ISO File (64Bit)
3. Select windows 10 installer !!
Tested with 4,8,16 gb USB Flash drive 100% Working
If not then you need to use a different USB Flash drive
success !
Click to expand...
Click to collapse
And First Disable Secure Boot !
77777777777777 said:
**Disable secure boot in Bios**
The Windows 10 boot USB will automatically appear in the boot manager
(Power on hold esc on keyboard and select boot manager select usb drive)
Option 2
try another USB stick
Option 3
Read carefully
Click to expand...
Click to collapse
It worked with an usb2 stick plugged into USB port 1.
thanks
Re-Up for drivers, please?
Audio & Wifi drivers are down, can you please re-up? thanks:good: