Database Users

[ROM][PORT][MT6582]Blisspop V4 For Xplorer H150

Introduction
Hey guys we all know CM12 Is now closer to stable. So here I brought Blisspop V4 for Xplorer H150 with much improvement.Thanks to the devs.
What's Working -
1.GPs
2.Hotspot
3.Camera
4.Bluetooth
5.Hotspot
6.DUAL Sim
7.Data connection
8.USSD (For some carriers only)
9.Video Recording
BUGS :-
1.Dual 3G
2.Offline Charging..
Downloads
1.BlissPOP V4 For H150
2.BT Fix
3.CM Boot Logo FlashAble
4.Flashable SU
IMP Note
Reboot , Soft reboot everythig works fine but if you power off and then power on you will stuck at bootlogo for fixing it goto recovery - reboot- system (twrp). If you get no service goto Settings-Sim- SIM 1 change sim name to whatever you want then you will get Carrier name in quick settings
Hit Like On Our Official Page - ADPT
XDA:DevDB Information
BlissPOP, ROM for all devices (see above for details)
Contributors
imalif, imalif, Munna36, Team Bliss And Full Cyanogen Team
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: MT6582 KK
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-11-25
Last Updated 2015-11-24

Great work dude..

Unofficial CyanogenMod 13

CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial build of CM 13 for the OnePlus 3 (all variants).
OnePlus warranty covers software modifications!
Downloads:
ROM:
https://www.androidfilehost.com/?fid=24591000424948386
Recovery:
https://dl.twrp.me/oneplus3/
Sources:
https://github.com/CyanogenMod/andro...neplus_msm8996
https://github.com/CyanogenMod/andro...eplus_oneplus3
https://github.com/theMuppets/propri...vendor_oneplus
https://github.com/CyanogenMod/andro...ce_oppo_common
https://github.com/CyanogenMod/andro...ce_qcom_common
https://github.com/CyanogenMod/andro...opensource_Nfc
https://github.com/CyanogenMod/andro...rce_frameworks
https://github.com/CyanogenMod/andro...rce_libnfc-nci
Installation instructions:
You must unlock your bootloader via fastboot.
You must have a custom recovery installed (link above)
Fully wipe your device from Recovery if you are not coming from CM13.0 already.
Flash the downloaded ROM
Locate 6.0 Gapps via a quick Google search. (Make sure it‘s arm64)
Reboot into recovery and install the ROM.
Don‘t flash gapps after you booted up CM 13! This will kill your device. If you want gapps, then flash it right after you wiped your phone and flashed CM 13.
Known issues:
MSM8996: It‘s a new platform. Don‘t expect that CM 13 will run as good as stock.
Dash charge: Does not work, blame OnePlus for not releasing its sources in kernel.
Credits:
LG G5 devs, for their initial CM bringup to the MSM8996 platform
OnePlus, for the actual phone and the engineers helping me with sorting out few issues
Every CM contributor
Grarak
XDAevDB Information
CyanogenMod OnePlus 3, ROM for the OnePlus 3
Contributors
Grarak
_superman
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-07-19
Last Updated 2016-07-09

[ROM][OFFICIAL][UX][N][7.0][DQC1][SM-G93XF/FD/K/L/S/W8]Dream8 V22.0

CENTER]To all devs: You're not allowed to take files of the ROM without my permissions[/CENTER]
Join OUR Telegram Group
ROM Information
- Based on G935FXXU1DQC1
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Rooted with Super SU
- Multilingual
- Super Kernel
B]ROM Features[/B]
-Applock
-Floating Messages
-Application Manager
-S8 Apps
-S8 ICONS
-Tweaks Smooth and stable
-KNOX in aroma
-Models in AROMA
-STOCK AND STABLE
Changelog
-Initial Release
Installation Steps
-Flash Update Modem and Bootloader via odin (recommended)
- Full Wipe (System, Data, Davik Cache, Cache)
- Install / Flash ROM
- Reboot and enjoy (first bootup will take a while, so grab a cup of coffee)
Supported devices
- All S7 EXYNOS 8890 DEVICES
Thanks to:
XuXu from Chinese website
@joejoe23 for making this rom
@Ale95 for help always there..
@Martlliero thanks to him my teacher
@Ale95 XDA Team
@Tkkg1994 for kernel
@Sac23
@JasonRR
@thereassaad
@Repulsa
@edzamber
@DaOldMan
PM If I forgot any one
DOWNLOAD
v22
AFH
Mirror link
GDRIVE
XDA:DevDB Information
Dream8 ROM , ROM for the Samsung Galaxy S7 Edge
Contributors
Ouweshs28, joejoe23, XuXu
Source Code: https://forum.xda-developers.com/galaxy-s7/development/kernel-superkernel-v1-0-t3389247
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N BOOTLOADER/TWRP
Based On: Grace/Dream UX
Version Information
Status: Stable
Current Stable Version: V22.0
Stable Release Date: 2017-03-28
Created 2017-03-28
Last Updated 2017-03-28

TWRP 3.1.1 for Redmi Pro

Today I want to share with you the device tree I have made to compile TWRP for our Redmi Pro as well as the images of TWRP to install directly to the device.
What are the advantages of having the recovery compiled from source?
The main advantage of having the recovery compiled from source is the ease to get the recovery updated. Whenever TWRP updates their recovery we will have that version in our phones because we will only need to compile the recovery with the device tree that is already done and that should work perfectly and shouldn't take more than half an hour if everything goes well.
Then I will be updating the recovery when a new version is released
Download Links:
Latest version: 3.1.1
3.1.1: https://www.androidfilehost.com/?fid=745425885120733557
3.1.0: https://www.androidfilehost.com/?fid=457095661767152066
If you like my work you can offer me a beer here
https://www.paypal.me/OrdunaLagarma
XDA:DevDB Information
TWRP for omega, Tool/Utility for the Xiaomi Redmi Pro
Contributors
end222
Source Code: https://github.com/end222/twrp_omega_device_tree
Version Information
Status: Stable
Current Stable Version: 3.1.1
Stable Release Date: 2017-05-21
Created 2017-05-21
Last Updated 2017-05-21

Thanks.

Thanks.

thanks for quick twrp port for redmi pro

end222 said:
Today I want to share with you the device tree I have made to compile TWRP for our Redmi Pro as well as the images of TWRP to install directly to the device.
What are the advantages of having the recovery compiled from source?
The main advantage of having the recovery compiled from source is the ease to get the recovery updated. Whenever TWRP updates their recovery we will have that version in our phones because we will only need to compile the recovery with the device tree that is already done and that should work perfectly and shouldn't take more than half an hour if everything goes well.
Then I will be updating the recovery when a new version is released
Download Links:
Latest version: 3.1.1
3.1.1: https://www.androidfilehost.com/?fid=745425885120733557
3.1.0: https://www.androidfilehost.com/?fid=457095661767152066
If you like my work you can offer me a beer here
https://www.paypal.me/OrdunaLagarma
XDA:DevDB Information
TWRP for omega, Tool/Utility for the Xiaomi Redmi Pro
Contributors
end222
Source Code:https://github.com/end222/twrp_omega_device_tree
Version Information
Status: Stable
Current Stable Version: 3.1.1
Stable Release Date: 2017-05-21
Created 2017-05-21
Last Updated 2017-05-21
Click to expand...
Click to collapse
If I flash this using cmd will it clear the old version? If not how to clear the old one and install this one

daffa ZRN said:
If I flash this using cmd will it clear the old version? If not how to clear the old one and install this one
Click to expand...
Click to collapse
Yes, it will clear it

Thankyou working fine

thanks

MIUI 9 for Z00A by fosseperme

FYI - YOU ALL FLASH AT YOUR OWN RISK AND PERIL ... remember that before you try and flash anything that is unstable
I NEED OF TESTERS TO TRY THE MIUI 9 ROM FOR ZENFONE 2 (BASED ON LATEST MIUI.IT FOR 5X)
STATUS: NOT TESTED
SOFTWARE GUIDE
1) Downgrade to a Lollipop Rom and download the package called "Boot & System of Miui 9 for Zenfone 2 by fosseperme" at this link: MODERATOR EDIT
2) Extract the zip on the desktop. You ll have two files, system and boot. Copy it into your ADB folder on PC
3) Go in TWRP Recovery and do a full wipe (system, data, cache and dalvik)
4) Now enter in fastboot (with the phone connected to the pc), open ADB and digit:
- fastboot flash boot boot.img
- fastboot flash system system.img
- fastboot reboot
Now reboot and try if works!
XDA:DevDB Information
MIUI 9 for Z00A by fosseperme, ROM for the Asus ZenFone 2
Contributors
fosseperme, fosseperme
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
ROM Firmware Required: Rom Lollipop with TWRP
Based On: ParanoidAndroid 5.1
Version Information
Status: Testing
Created 2018-02-19
Last Updated 2018-02-19

Can you make it for Z008

But miui 9 is based on nougat for some phones. Why should we downgrade? If you were able to make it with lollipop device source, why don't you try marshmallow? We won't need to downgrade bootloader then.

drumsalve said:
But miui 9 is based on nougat for some phones. Why should we downgrade? If you were able to make it with lollipop device source, why don't you try marshmallow? We won't need to downgrade bootloader then.
Click to expand...
Click to collapse
mi pad 2 does not have an android 7.1
miui 9 on this device is built on android 5.1
mi pad 2 is also based on the intel processor
p.s. rom not boot. stop on asus logo

After some discussion this thread may resume as usual, But please keep in mind that for any of you using these builds that you are fully aware of the risks you'll be undergoing when doing so.

Fossperme strikes again

Thank you
Sr, Z00D MIUI 8 or MIUI 9?

Miui Z00A?

No Download link..?

OwaisKLodhi said:
No Download link..?
Click to expand...
Click to collapse
thank God, there isn't one....

Cookie Ninja said:
thank God, there isn't one....
Click to expand...
Click to collapse
Where is the link bro...
I didn't get it..

OwaisKLodhi said:
Where is the link bro...
I didn't get it..
Click to expand...
Click to collapse
Moderator edit... Link removed
If there's still a link...