Official Cm13 for HTC One M9[GSM] [himaul] - One (M9) General

Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:

Super cool!!!!
Sent from my iPhone using Tapatalk

Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!

joekiddo said:
Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!
Click to expand...
Click to collapse
yea the mounting method is different now ... it tries to recognize it as internal storage i think, but when it's not formatted for internal storage it will be just skipped...same Problem on many MM roms, not only for m9 and m8

Does SuperSU 2.56 work with cm13 on One m9?

vrxj81 said:
Does SuperSU 2.56 work with cm13 on One m9?
Click to expand...
Click to collapse
No need for this. Root is built in. You can enable it through the developer's menu

is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....

dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I'm not with AT&T but I can make and receive calls, except that if I don't enter the area code when dialing, the phone app crashes. I can still call even if the app crashed. Other than that, so far so good.
Edit: There's a time bug also as blackroseMD1 said.

Seems like it has the time bug too, where the clock will fall behind by minutes or hours (or freeze completely) after the phone has been put down for a while. Unfortunately that's a killer bug since it messes with alarms.

dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.

Dheyl said:
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.
Click to expand...
Click to collapse
Many of the custom Roms support VoLTE. Ice does for sure and I think LeeDroid and ViperOne do too.

Is just me, or the device rumble doesn't work?

WalterCool said:
Is just me, or the device rumble doesn't work?
Click to expand...
Click to collapse
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.

blackroseMD1 said:
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.
Click to expand...
Click to collapse
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic

Himalaya saxena said:
Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:
Click to expand...
Click to collapse
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.

LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Just wait for some stable built then it will be all fine.

excellent
installed it and its working very well except when i launch the camera and swipe to video mode it crashes. Also i have a magnetic car mount, when i mount the phone the display goes into Dot View and im not sure how to disable it

WalterCool said:
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic
Click to expand...
Click to collapse
No, I didn't have to do anything extra. Vibration worked out of the box for me.
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.

blackroseMD1 said:
No, I didn't have to do anything extra. Vibration worked out of the box for me.
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.
Click to expand...
Click to collapse
It works for me as well, thanks!

I have not tested CM13 yet... how does it look like? are there still a lot of missing things?

Related

MIUI Released for the Note 4!!!

Everyone! MIUI has been released for the note 4! Are there any T-Mo developers that could take a look at the ROM and try and update it?
http://forum.xda-developers.com/note-4/general/finally-note-4-miui-rom-t3221786
i flashed and been with that rom for one day,i could say its usable and 70% stable...
Click to expand...
Click to collapse
Why would anyone want a rom that's only 70% stable?
dkb218 said:
Why would anyone want a rom that's only 70% stable?
Click to expand...
Click to collapse
Because it's now being updated every week?
dkb218 said:
Why would anyone want a rom that's only 70% stable?
Click to expand...
Click to collapse
Yes because when custom roms started all of them were 100% stable right?!
Please don't debbie down the guy. I was actually hoping that MIUI would come to the Note 4, and so are others. It may currently on be 70% stable but it can be worked on to make it as close to 100% stable as possible. It's better than nothing.
I have to say aside from data connectivity issues the rom ran quite amazing when infested it a few days ago. Here and there things were in Chimeese or Japanese, which ever the ROM is in, but aside from that I actually had no FCs. Wifif was great. I did have data at one point yet in for get exactly how I had got it to run 3g. I tend to experiment with ROMs and flash odd ball fixes not quite developed for certain ROMs or devices. I did flash something and data worked yet in was having various FCs so it was unusable as a daily. I'll have to revisit and see where I can take it and report.
mattdiehl83 said:
I have to say aside from data connectivity issues the rom ran quite amazing when infested it a few days ago. Here and there things were in Chimeese or Japanese, which ever the ROM is in, but aside from that I actually had no FCs. Wifif was great. I did have data at one point yet in for get exactly how I had got it to run 3g. I tend to experiment with ROMs and flash odd ball fixes not quite developed for certain ROMs or devices. I did flash something and data worked yet in was having various FCs so it was unusable as a daily. I'll have to revisit and see where I can take it and report.
Click to expand...
Click to collapse
What did you flash to restore data?
It doesnt say that is for 910t.
How do you make it run flashing a kernel?
Here's the link.... No data just yet.... http://forum.xda-developers.com/showthread.php?p=63225505
Someone has to build a kernel for it, back in the day CM kernels were a good substitute.
Orical said:
Someone has to build a kernel for it, back in the day CM kernels were a good substitute.
Click to expand...
Click to collapse
I've flashed two kernels for it, and it bootloops. The kernel in it is made for MIUI.
wipe system, data and cached or format.
first miui rom
then data fix N910T, patch_N910T(camera fix)
and last gapps rom miui.
DATA FIX
https://drive.google.com/file/d/0B5-_pFg6DSq4eklXc3NrcXFUNGM/view?usp=sharing
GAPPS
https://drive.google.com/open?id=0B5...zlvdFFER1JGR1U
Camera Fix
https://drive.google.com/open?id=0B5...XRqTmlVUFZreUk
drshorty said:
wipe system, data and cached or format.
first miui rom
then data fix N910T, patch_N910T(camera fix)
and last gapps rom miui.
DATA FIX
https://drive.google.com/file/d/0B5-_pFg6DSq4eklXc3NrcXFUNGM/view?usp=sharing
GAPPS
https://drive.google.com/open?id=0B5...zlvdFFER1JGR1U
Camera Fix
https://drive.google.com/open?id=0B5...XRqTmlVUFZreUk
Click to expand...
Click to collapse
The gapps and camera links dont work can you please fix it, thanks!
noobiedev83 said:
The gapps and camera links dont work can you please fix it, thanks!
Click to expand...
Click to collapse
Here u go.
Gapps
https://drive.google.com/file/d/0B5-_pFg6DSq4NzlvdFFER1JGR1U/view?usp=docslist_api
Camera
https://drive.google.com/file/d/0B5-_pFg6DSq4eXRqTmlVUFZreUk/view?usp=docslist_api
drshorty said:
Here u go.
Gapps
https://drive.google.com/file/d/0B5-_pFg6DSq4NzlvdFFER1JGR1U/view?usp=docslist_api
Camera
https://drive.google.com/file/d/0B5-_pFg6DSq4eXRqTmlVUFZreUk/view?usp=docslist_api
Click to expand...
Click to collapse
Thank you!!
noobiedev83 said:
Thank you!!
Click to expand...
Click to collapse
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
drshorty said:
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
Click to expand...
Click to collapse
Data works fine this rom is awesome man thanks a lot for the fix!!!
noobiedev83 said:
Data works fine this rom is awesome man thanks a lot for the fix!!!
Click to expand...
Click to collapse
No problem ☺
drshorty said:
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
Click to expand...
Click to collapse
dude incoming calls dont work
Diarrhea Slushie said:
dude incoming calls dont work
Click to expand...
Click to collapse
Im at work now.. I will check it tonight, i found the bug. I have some work for you...
Miui rom - extract the rom and the system folder out.
Data Fix - extract it, deleted system folder and put miui system folder in, compress it, then flash it.
Incoming call work and internet work.
---------- Post added 27th October 2015 at 12:07 AM ---------- Previous post was 26th October 2015 at 11:57 PM ----------
People having problem with incoming call or data mobile..
First install miui rom, data fix and camera fix. Then reboot. Set up everything.
Follow this step to fix incoming call after you install everything and set it up.
Im at work now.. I will check it tonight, i found the bug. I have some work for you...
Miui rom - extract the rom and the system folder out.
Data Fix - extract it, deleted system folder and put miui system folder in, compress it, then flash it.
Incoming call work and internet work.
install
First..............MIUI 7 - 5.10.24 ROM
Second......N910T DATA Fix.zip https://drive.google.com/open?id=0B5-_pFg6DSq4WFNYU1FmV1lrVlE
Last...............GAPPS or "download google installer from miui apps store"

First official nightly version of CM14.1

CM14.1 nightly is available now for htc one m8 on CM official website
https://download.cyanogenmod.org/?device=m8
Does it mean that they are no longer working on CM13??
Which mean there is no snapshot version ??
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
i hope so ^^
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
have you tried this cm14.1 nightly is it stable ?
Xhemal1325 said:
have you tried this cm14.1 nightly is it stable ?
Click to expand...
Click to collapse
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Saleen28 said:
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Click to expand...
Click to collapse
Is the same as unofficial, to be perfectly honest.
fizbanrapper said:
Is the same as unofficial, to be perfectly honest.
Click to expand...
Click to collapse
Nuh uh!!!
Its named OFFICIAL!
Previously it was written what doesn't work on the page.
Now nothing is enlisted.
So maybe it's stable.
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
skippydvd said:
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
Click to expand...
Click to collapse
Grab a log. It might help devs to fix this
Waza_Be said:
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Click to expand...
Click to collapse
Are you on GPE firmware? You can use terminal emulator and type:
Code:
su
df
This will tell you sizes of all partitions.
Ok, this was just an issue of CM recovery.
I installed TWRP and everything is fine
problems in cm14.1 htc m8
Hi guys I m having some problems
I have updated to cm 14.1 and it went to an bootloop. So i let battery drains completely then I after charging I wiped everything and then reboot. The phone rebooted and first thing I noticed is that there is no Google app. So i flashed gaps for 7.1 nano package which fixed this.
Now phone is working good though it's having some performance issues like slow keyboard (third party keyboards also), sometimes it heats and sometime it reboot by itself.
There is a major bug u have found
That I can't download messenger from play store it just keeps showing downloading but every other app is down loading fine. Then I went to browser to download some apks but I found that every downloading is failing due to unknown issues.
Then I installed Firefox chrome tried everything but no luck, but uc browser is showing that there is something wrong with SD card but there is no SD card, I have tried with SD card reboot reset everything still no luck. Then I connected it to my pc just to know that it's not even accepting anything from pc also.
It just keep showing copying moving but there is no progress. AND IT also not receiving anything from share it also. I can't even see my whatsapp contacts profiles pics they all are blank I can't download Nothing..
It's like my phone will download only through play Store and it will not accept anything from any other source like pc browser whatsapp hike messenger Facebook share it etc.
Theme store is also Missing.
But I am still able to use my phone as daily driver as it have no issues with sim card radio wifi Camera or anything else other than mentioned Above
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Xtenchen said:
.... comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Xtenchen said:
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
Here too! Omg you are the best ?
ckpv5 said:
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Click to expand...
Click to collapse
Can I ask you where did you go ? You was one of the best devs here. HTC 10 developing or ?
Moderator Information,
Thread has been closed as an official thread by an official maintainer has now been released.

Sailfish OS on the bullhead

edit: latest 14.1 base out with fixed camera and booting
edit: alpha6 is out, sensors fixed, but camera is completely broken
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Flash the latest stock image for your base and boot into it. for android 7 thats 7.1.2 (N2G48C, Aug 2017) and android 6 thats 6.0.1 (MTC20K)
Reboot to twrp
Format data
Reboot to twrp again
copy over the zips
flash cm or lineage from prefered base, but 14.1 is better.
Flash sfos zip
Working
Audio
Calls
Texts
Data
Wifi
Camera
Sensors
Not Working :~( :
Fingerprint scanner
Bluetooth
Click to expand...
Click to collapse
Issue with install apps from the app store or warehouse?
need to setup password in developer options
devel-su pkcon refresh
Click to expand...
Click to collapse
also since store is sometimes a bit meh, you can use
https://openrepos.net/content/basil/warehouse-sailfishos
best way to copy files onto device is through ssh, setup password in developer options
store is sometimes broken, you need to do devel-su pkcon refresh in terminal, need to set password up in developer options.
OTA - Over the Air update
Best way to update SailfishOS is by using an ssh connection to the phone.
Disable all patches and Openrepos repositories before updating.
Before updating use
Set desired release version, for example 2.2.0.29:
ssu release 2.2.0.29
Click to expand...
Click to collapse
Refresh the package cache:
devel-su pkcon refresh
Click to expand...
Click to collapse
Upgrade SailfishOS:
version --dup
Click to expand...
Click to collapse
Reboot the phone and enjoy the new release.
this wouldnt of been possible from the immense amount of help from the guys @freenode#sailfishos-porters
Really nice job! hope we can get all working in near future
Awesome cant wait to see stable build!
Sent from my Nexus 5X using Tapatalk
Can this be installed with multirom as secondary rom?
m4r0v3r said:
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Click to expand...
Click to collapse
Nice job, fingers crossed for getting other features to work!
btw. which vendor to use with it?
latest 6.0.1
fnldstntn said:
Can this be installed with multirom as secondary rom?
Click to expand...
Click to collapse
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
m4r0v3r said:
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Click to expand...
Click to collapse
Yes there is a stable multurom on jolla kernel tread but in that case probably i will need to use the cm13 as primery rom to becouse of the vendor.
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Really nice, sadly i need the camera for my work so i cant use as DD
Renaf2 said:
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Click to expand...
Click to collapse
Not a rom, it is a completely different operating system so no android apps.
giantflash said:
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
Click to expand...
Click to collapse
the camera thing is a 32bit/64bit issue atm so i'll see were I get with it, am also messing around trying to get sfos working on a Huawei P9
No android apps at all, we have sfdroid, but its not working on cm13 as far as I know.
Very cool indeed, def hope this goes further. Remember it on N5 and was awesome
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
justf0127 said:
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
Click to expand...
Click to collapse
That was my fault, issue with PARANOID_ANDROID. New image thats been upped should fix the issue
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Riskypedia said:
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Click to expand...
Click to collapse
December probably.
And I know I'm bothering, but another question...
Is this rom doesn't contain boot animation? Cuz I saw cm13 booted well, but after flashing this over cm13 I can't see anything except google logo. Should I set my bootloader to the latest one?
6.0.1 (MTC20L) is what am using

[CarbonRom][Moo][CR5.1]

Hey guys I made this thread to discuss about a custom rom known as CARBON ROM , I'm sure all of you know and have tested the build from 7th Jan
But what issues did you have with the Rom ? Any suggestion or workaround you have feel free to share, if you're a developer then you could help us fix bugs.
Some of you may know that yesterday Carbon Released a NEW BUILD FOR Z2, I'll put the link in the first post.
If you've tried the latest build, tell us about the issues or things that you think are fixed. Thank you. Impatiently waiting for your feedback
https://get.carbonrom.org/device-sirius.html
Im currently using the latest 23jan build. Rom is preety smooth nd battery life is also fine and i havnt come across any new bugs, so the old/known bugs are
1)camera is dark and autofocus is broken
2)echo in call
3)torch sometimes does work when toggled from quick settings.
I have tested latest build (107). My micro sd card is missing....my internal archive (all zip file about rom and gapps) is empty and when reboot always appear the first configuration.
For now I turn on build 104 dated 04/01/17
sorry for my bad english
Now I test 23/01 ......
robby.pgn said:
I have tested latest build (107). My micro sd card is missing....my internal archive (all zip file about rom and gapps) is empty and when reboot always appear the first configuration.
For now I turn on build 104 dated 04/01/17
sorry for my bad english
Now I test 23/01 ......
Click to expand...
Click to collapse
23/01 has no issues with microsd and internal zips.
It's true. 23/01 is really good for me. Thanks
robby.pgn said:
It's true. 23/01 is really good for me. Thanks
Click to expand...
Click to collapse
Are u able to connect to bluetooth device?
I used build 07.01, i cant use torch, Sd card.. I'm actually on PureNexus 07.01 and it's very good, the only problem that I have is torch not working
Jonanthan Nascimento said:
I used build 07.01, i cant use torch, Sd card.. I'm actually on PureNexus 07.01 and it's very good, the only problem that I have is torch not working
Click to expand...
Click to collapse
Keep tapping on it but not rapidly
Austin.gonzo said:
Keep tapping on it but not rapidly
Click to expand...
Click to collapse
Nothin
I can not install zip - constantly gives me an error 7
alf-endy said:
I can not install zip - constantly gives me an error 7
Click to expand...
Click to collapse
First extract the boot image from the zip file, flash it through fastboot then flash twrp using fastboot also start the phone by holding power and volume down to get to recovery do a wipe (system, data & caches) install rom and enjoy
alf-endy said:
I can not install zip - constantly gives me an error 7
Click to expand...
Click to collapse
Use twrp from aosp thread or use multirom twrp to flash.
Hey guys.
How is the camera on this rom?
I know it's not Sony stock rom quality, but is it usable?
Also should someone change from ExistenZ to this since ExistenZ is not going to be updated?
nfsmw_gr said:
Hey guys.
How is the camera on this rom?
I know it's not Sony stock rom quality, but is it usable?
Also should someone change from ExistenZ to this since ExistenZ is not going to be updated?
Click to expand...
Click to collapse
Camera is WIP. It Is the same quality as aosp nougat. Autofocus is broken nd pictures are very dark. If u need camera as primary then I won't suggest this rom or Any other nougat rom.we will have to wait till new blobs are released.
vikash1994b said:
Camera is WIP. It Is the same quality as aosp nougat. Autofocus is broken nd pictures are very dark. If u need camera as primary then I won't suggest this rom or Any other nougat rom.we will have to wait till new blobs are released.
Click to expand...
Click to collapse
Got it, thanks man.
alf-endy said:
I can not install zip - constantly gives me an error 7
Click to expand...
Click to collapse
These ROMs are installed just fine with TWRP 3.0.0-0
robby.pgn said:
These ROMs are installed just fine with TWRP 3.0.0-0
Click to expand...
Click to collapse
This ROM can be installed with TWRP 2.8.70 from AOSP thread - already tried

Resurrection Remix Official Support

I have been searching for updates on resurrection remix and found in the locked thread that the axon 7 has official support. Which can be found at the link below:
https://sourceforge.net/projects/resurrectionremix/files/axon7/
Can we have a thread back that follows this topic, making it easier for us to discuss everything in one place and follow along?
Sent from my ZTE A2017U using Tapatalk
I agree. It was premature for them to track down the mods and request the thread closed if they weren't ready to post the new thread.
Beyond that the 4.16 build seems to be working pretty good for me.
https://sourceforge.net/projects/resurrectionremix/files/axon7/
Hola
Yes, the 05-16-2017 build is also working well for me. Unfortunately for me though I had to learn the hard way that a dirty flash wasn't going to work. Anyway, after factory resetting phone from TWRP v3.1, installing ROM, and then the latest GApps package, the phone works extremely well with all the bells and whistles that RR provides.
I didn't apply the LOS sound patch v4.1 as yet as I don't seem to have any major issues with sound. What about you folks?
It's still april on this side of the pond...
Able to turn off individual sim cards yet?
Please open thread for RR 5.8.3. so we can talk about it...
You can go to g+ or you can wait for the maintainer to start an official thread when his real life allows.
Also there is nothing wrong with stating an unofficial discussion thread like this one.
QAM said:
Hola
Yes, the 05-16-2017 build is also working well for me. Unfortunately for me though I had to learn the hard way that a dirty flash wasn't going to work. Anyway, after factory resetting phone from TWRP v3.1, installing ROM, and then the latest GApps package, the phone works extremely well with all the bells and whistles that RR provides.
I didn't apply the LOS sound patch v4.1 as yet as I don't seem to have any major issues with sound. What about you folks?
Click to expand...
Click to collapse
I wasn't able to successfully get the 4-16 build to work. Kept crashing. I went back to the last unofficial.
gpz1100 said:
Able to turn off individual sim cards yet?
Click to expand...
Click to collapse
Yes, you can turn off individual sim cards.
Harmtan2 said:
Yes, you can turn off individual sim cards.
Click to expand...
Click to collapse
Excellent! Can you post a pic of what the UI looks like for this control?
gpz1100 said:
Excellent! Can you post a pic of what the UI looks like for this control?
Click to expand...
Click to collapse
Here you go.
Yep, I found RR 5.8.3 a couple days ago and flashed it (only 3 days after making the switch to LOs). Was my go-to ROM on my Nexus 6P.
The newest RR seems to already have the sound patch, and is 100% Substratum compatible. Completely win-win for me! Very stable, too soon to determine battery life.
I flashed a version of Dolby, found in this thread: HERE - I didn't flash V4a this time around...The sound is REALLY good with the version of Dolby I flashed.
I'm so glad I found the new official RROS because it's such a good rom. I tried nuclear and no offense but RROS offers so much more while being just as stable with great battery life. On nuclear I could disable my secondary sim but it didn't have the ability to hide the non active network from the status bar. I also changed dpi but the font for network speed indicator stayed the same size and was cut off because of it.
RROS is the best rom I've used on the axon 7. Hope we get back a thread soon so newcomers can find links easily and so we won't have to discuss it here in the thread.
Sent from my ZTE A2017U using Tapatalk
I'm on RR april 10/11 (one of the 2), but can't seem to get aptx to work. I flashed the zips from https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228?nocache=1
but logcat doesn't show up anything for "aptx" or "apt-x" after connecting to my earphones. I'm testing with QCY Y11s from Amazon.
Can someone confirm aptx works fine for them on RR? Thx
strifej said:
I'm on RR april 10/11 (one of the 2), but can't seem to get aptx to work. I flashed the zips from https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228?nocache=1
but logcat doesn't show up anything for "aptx" or "apt-x" after connecting to my earphones. I'm testing with QCY Y11s from Amazon.
Can someone confirm aptx works fine for them on RR? Thx
Click to expand...
Click to collapse
Working for me.
Harmtan2 said:
Here you go.
Click to expand...
Click to collapse
Which substratum theme is this. I like it a lot. ?
kodrnusa said:
Which substratum theme is this. I like it a lot. ?
Click to expand...
Click to collapse
Swift Black. It costs like a dollar or something like that.
In the process of installing now. For some reason it found the stock format on the microsd 'corrupted' and wouldn't read unless I did a format (was formatted exfat, now fat32). Not a big deal. Backed up contents before switching. No exfat support?
Is there a way to disable the vibration when using the finger print reader?
Aside from that, it picked up both sim cards (freedompop lte) right away, even configured the apn's correctly.
Does it support wifi calling?
tele_jas said:
Yep, I found RR 5.8.3 a couple days ago and flashed it (only 3 days after making the switch to LOs). Was my go-to ROM on my Nexus 6P.
The newest RR seems to already have the sound patch, and is 100% Substratum compatible. Completely win-win for me! Very stable, too soon to determine battery life.
I flashed a version of Dolby, found in this thread: HERE - I didn't flash V4a this time around...The sound is REALLY good with the version of Dolby I flashed.
Click to expand...
Click to collapse
What specifically did you flash from that thread?
gpz1100 said:
What specifically did you flash from that thread?
Click to expand...
Click to collapse
See post #6, that's what I flashed (v. 2.4)
^^Thanks!
I found an issue with in call audio through the ear piece. Seems speaker phone has to be toggle to get any sound from the ear piece. Also in call timer is missing. I vaguely recall reading about this in one of the other threads. Was there any solution to this?

Categories

Resources