The Nexus 5X's USB Type-C port can both input and output audio, however mine needed some setting up before it would work.
I plugged in a Blue Yeti microphone into the Nexus 5X using both the USB Mini-B to USB Type A cable (comes with the Yeti), and the USB-A female to USB-C male adapter from Google. The Yeti powered on instantly, it's red light turned on, and I could hear myself through its no latency monitoring via headphones (Blue Yeti has a 3.5mm headphone output), however the 5X would not recognize the Yeti as either an audio input nor as an audio output device.
I went into Developer Options, scrolled down to "Select USB Configuration" and changed the radio button selection to "Audio Source". I scrolled down even farther to the Media section, and there I disabled "Disable USB Audio Routing" (you might say that I enabled USB audio routing). There was no immediate effect, so I unplugged the Yeti, plugged it back in, et voila! The phone recognized the Yeti as both a microphone AND an audio playback device simultaneously.
I don't know for sure which of those two settings truly made a difference, as now that I've got USB audio to work, neither of those settings seems to make a difference anymore -- it seems as though my Yeti is permanently approved for USB audio in my 5X!
The USB audio works for listening to Google Music, and even for regular voice phone calls.
Do you have a USB microhone/headset/headphones/DAC? Get a good USB-A female to USB-C male adapter and you'll be quite pleased! And hopefully you'll be luckier than I was and it'll just work when you plug it in, but if not then toggle those USB audio Developer Options as described above.
Finally someone has posted on audio out and in via USB c! Thanks!
Just plugged the 5X into a Focusrite Scarlett 18i20. The phone recognizes the first two input channels and can record in mono or stereo (input 1 as left track and input 2 as right track).
Also it does seem as though you must keep the "Disable USB audio routing" off for it to work.
Sweet, guess I won't need the SoundAbout app anymore.
This is really nice. Able to route usb audio to a Cambridge Audio DacMagic. Much better than the on-board dac, and no longer tied to a specific app.
decided to add this on my index
[INDEX] LG NEXUS 5X Resources Compilation Roll-Up
Isn't this just a USB sound card over OTG? I plugged in a Logitech sound card with line out and mic in and it worked without any tweaks.
My 6th gen iPod nano plays usb audio perfectly fine on my crappy pioneer deh-3300ub headunit, but no matter what settings or cables I try the stereo says "N/A USB" with my N5X plugged in.
Anyone get the audio-in-via-usb to work with the built-in Google camera/camcorder app?
I am using Nexus 6P
The audio-in DOES work with this video app: https://goo.gl/Dtu14
But with the built-in camcorder, it only records audio from the phone's mic, not the usb mic.
mptpro said:
Anyone get the audio-in-via-usb to work with the built-in Google camera/camcorder app?
I am using Nexus 6P
The audio-in DOES work with this video app: https://goo.gl/Dtu14
But with the built-in camcorder, it only records audio from the phone's mic, not the usb mic.
Click to expand...
Click to collapse
I would think google designed it to only use built in microphone. It would take some mods or tinkering to get it to do otherwise.
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
makogaleos said:
The Nexus 5X's USB Type-C port can both input and output audio, however mine needed some setting up before it would work.
I plugged in a Blue Yeti microphone into the Nexus 5X using both the USB Mini-B to USB Type A cable (comes with the Yeti), and the USB-A female to USB-C male adapter from Google. The Yeti powered on instantly, it's red light turned on, and I could hear myself through its no latency monitoring via headphones (Blue Yeti has a 3.5mm headphone output), however the 5X would not recognize the Yeti as either an audio input nor as an audio output device.
I went into Developer Options, scrolled down to "Select USB Configuration" and changed the radio button selection to "Audio Source". I scrolled down even farther to the Media section, and there I disabled "Disable USB Audio Routing" (you might say that I enabled USB audio routing). There was no immediate effect, so I unplugged the Yeti, plugged it back in, et voila! The phone recognized the Yeti as both a microphone AND an audio playback device simultaneously.
I don't know for sure which of those two settings truly made a difference, as now that I've got USB audio to work, neither of those settings seems to make a difference anymore -- it seems as though my Yeti is permanently approved for USB audio in my 5X!
The USB audio works for listening to Google Music, and even for regular voice phone calls.
Do you have a USB microhone/headset/headphones/DAC? Get a good USB-A female to USB-C male adapter and you'll be quite pleased! And hopefully you'll be luckier than I was and it'll just work when you plug it in, but if not then toggle those USB audio Developer Options as described above.
Click to expand...
Click to collapse
Can you test and report which apps can record audio with the blue yeti? free and/or paid, if you have the time to test of course.
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
chavook said:
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
Click to expand...
Click to collapse
That's because you most likely did just get a basic 3.5mm to USB-C adapter with no active circuit. I'm fairly certain that Nexus 5X do not support analog passthrough over USB-C, which means you will need something with active circuitry.
Sent from my Le X829 using Tapatalk
chavook said:
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
Click to expand...
Click to collapse
GethPrime said:
That's because you most likely did just get a basic 3.5mm to USB-C adapter with no active circuit. I'm fairly certain that Nexus 5X do not support analog passthrough over USB-C, which means you will need something with active circuitry.
Sent from my Le X829 using Tapatalk
Click to expand...
Click to collapse
You need a portable DAC (get a cheap one like Fiio A1 for 25usd). Nexus 5X USB-C is not USB3/3.1 interface, so it won't work.
Related
Heads up to all the audio guys out there. Listening to music as I type through my USB DAC > tube amp setup with no special setup. Just USB OTG cable to DAC.
USB Audio Out FTMFW!!!!!
(I'm on AT&T model running ARHD 9.1, not that it matters, I'm sure this feature is universal)
USB OTG to DAC? Do you have an link or pic to such cable?
edgarf28 said:
USB OTG to DAC? Do you have an link or pic to such cable?
Click to expand...
Click to collapse
Just a regular USB OTG connected through the USB cable that comes with the DAC
I have my HTC one with headphone jack to rca cables going into my tube preamp the foreplay. Then from the foreplay to my Dynaco ST70.
YouTube videos sound like garbage bags flapping in the wind.
The tube audio only people would smash my face in if they heard what YouTube sounded like on tubes. Not a good mix at all...
Sent from my HTC One using xda app-developers app
Yep, just a run of the mill standard usb OTG cable and then plug the usb cable from your DAC into it and your good. You'll get the headphone symbology in the status bar and the beats logo although beats appears to be bypassed (which is good) utilizing usb audio out.
sluflyer06 said:
Yep, just a run of the mill standard usb OTG cable and then plug the usb cable from your DAC into it and your good. You'll get the headphone symbology in the status bar and the beats logo although beats appears to be bypassed (which is good) utilizing usb audio out.
Click to expand...
Click to collapse
Is that version 1.29? I have a T-mobile HTC One with 1.27 and USB DAC wouldn't work with FiiO E7 or JH-3a.
4.3 Update broke the USB audio out session disconnect
I've got the Sprint variant. Loaded the OTA update to 4.3 and now my USB audio gets hung when I disconnect my OTG cable. If I try to plug it in and reconnect later, my handset locks up tighter than Fort Knox. I've tried a factory reset, took a trip to the Sprint repair center (where no one even knew the audio out function existed ) so I'm stuck rebooting my phone between every listening session. Complete PITA. Specifically purchased this phone to use with my Fiio Andes, and everything was great until 4.3.
Does this significantly effect battery life?
Because this phone will be using the usb c connection to transfer audio with, will it be able to use external dac's such as the audioquest dragonfly or the chord mojo with out the need for an app like usb audio player pro?
The whole idea with usb audio is to remove DAC from the phone, enabling best audio earphones can produce. Which DACs are supported, I don't know.
With my Pro3 i just needed one of these: goo.gl/uGYUH4
My Oppo HA2 works perfectly with it.
Does the ordinary headsets with controls on wire like answer button or volume keys work with usb 3 adapter?
Hi all,
I'm looking for a way to use my earphones with 3.5mm audio jack via the micro USB port. Ideally, without carrying around a bulky separate amp. I bought a small micro USB to 3.5mm jack cable but it doesn't do anything straight out the box.
I don't know if i just need some sort of software to get the cable I've already bought working, or if I need some other sort of hardware.
Reason for all of this - I managed to break my 3.5mm audio output (plugged it in to a cheap ebay car audio unit and have blown something). I have wireless earphones....but just don't like them as much as my original wired ones!!!!
Hopefully someone can help me out!!
Cheers
You will NEED external DAC and AMP.
Micro usb can only output digital signal.
Sent from my SM-G935F using Tapatalk
You need a USB DAC. There a quite a few like FiiO Q1, AudioQuest Drangonfly, Oppo HA2-SE, Chord Mojo etc. Money is the limit
By itself micro USB does not transmit sound, it transmits a digital signal, you will need an additional USB DAC
Get a quality Bluetooth receiver. Here's a great one with apt-x low latency which is crucial for video.
TaoTronics Bluetooth 4.1 Transmitter / Receiver, 2-in-1 Wireless 3.5mm Adapter (aptX Low Latency, 2 Devices Simultaneously, For TV / Home Sound System) https://www.amazon.com/dp/B01EHSX28M/ref=cm_sw_r_cp_apa_urHgzb0W0T91H
Is OB18 or OB19 working with headphones using a 3.5" audio adapter to the USB port?
Has anyone gotten OB18 or OB19 working with headphones using a 3.5 audio adapter to the USB port? (So a USB3.1C -> 3.5 Audio jack adapter, which I have) ?
On OB18, I can see the settings that are supposed to make it work, but it doesn't yet recognize the adapter. Even if you're on pie on an OB6, have you gotten that working there? If I have to get a 6T for some reason, I'm just curious to know if the thing will work without bluetooth phones since it'll have no headphone jack, which I don't really like.
Many thanks.
Have you turned on OTG?
RogerF81 said:
Have you turned on OTG?
Click to expand...
Click to collapse
Yes, and enabled AUDIO Over OTG in developer options. And have two types adapters. It's not unusual. I've never seen more than one or two out of hundred's that've gotten this working. I hear it works somewhat in Android 9.
Found an OK alternative since my bluetooth works well:https://www.amazon.com/gp/product/B075JBLGLB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Bluetooth audio female in 3.5 and long charging battery: Works as well as my wired port.
Hey just acquired an essential phone but it didn't come with the audio jack anyone know an alert antivenin that works I tried two active adapters from eBay but they both don't work.. Any suggestions TIA
Check this thread:
https://forum.xda-developers.com/es...ial-ph-1-list-compatible-usb-c-t3726018/page8
There are quite a few suggestions there for adapters that are confirmed working with PH-1.
It has to be an adapter with a built in DAC. (the more expensive kind)
there are other phones that basically use just a converter cable and output analog audio through the USB C port, since those are just changing USB C to a headphone jack they are pretty common and cheap.
The essential phone outputs digitally to a USB digital audio converter chipset built into the converter rather than just straight analog audio.
So just make sure the adaptor you are looking at says it has a built in DAC and it should work.
sometimes they dont list it though so if you are going for a cheap one then you may have to rely on someone in the reviews having an essential phone.
most razer phone and google pixel adaptors work but I'd still verify they have a DAC, sometimes amazon listings will just list a whole slew of compatible phones.