good morning I have a problem when you want to return install the Android 5.1.1 rom N910CXXU2COJ5_N910CUUB2COJ2_N910CXXU1COJ5_HOME.tar and now I can not go back to 4.4.4 .
Odin says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANK5_N910CUUB1ANL1_N910CXXU1ANL4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell appears a legend
SW REV. CHECK FAIL DEVICE:2, BINARY:1
I have the version COJ5
Thank you
After you install COJ5, you are stuck to it. There is no easy way to downgrade it as now.
Related
The following error occurs while I try to root my Galaxy S4 GT-I9505 android 4.22
with Odin
<ID:0/016> Added!!
<ID:0/016> Removed!!
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> recovery.img
<ID:0/016> NAND Write Start!!
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the first button is Red - FAILED
PLEASE REPLY ASAP!
Deleted
Adnan.A said:
Wrong file You Root file not for I9505
Click to expand...
Click to collapse
Huh?
Deleted
Adnan.A said:
CF-Auto-Root-jflte-jfltexx-gti9505.zip for Galaxy S4 I9505
http://forum.xda-developers.com/showthread.php?t=2219803
Click to expand...
Click to collapse
I used that and Fail still comes up. Keep in mind that I already have superuser installed but it is not working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/017> Removed!!
<ID:0/017> Added!!
Deleted
I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
King Mustard said:
I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
Click to expand...
Click to collapse
try other usb port
I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is android 4.3. And for sure u flashed android 4.4.2 before. You cant flash android 4.3 having in your phone android 4.4.2. And pls dont open other post if you have other opened and you dont wanna do what I was telling ya before. My help finished. Ciao :fingers-crossed:
Sooooo I recently upgraded to KitKat 4.4.2. My device is Samsung Galaxy S4 I9505. This is the logs/message on Odin.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Removed!!
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone knows how to do this? I'm really noob at it so I still don't know how to fix it. Hoping for someone to reply
Have a look on the internet..
http://forum.xda-developers.com/showthread.php?t=2283919
Hello everyone , i have note3 n900 i trying upgrade it with rom (N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5) and not Successful and i try downloading other roms and i get the same problem
odin log :
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/023> Added!!
I was trying to flash custom rom using odin to my galaxy trend lite
/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7392DDUAND1_S7392ODDAND1__S7392DDUAND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Pls tell me whats the problem!!
You created thread in wrong section. Can't you see it this is rom kernel development section. Plz moderator delete this thread...