G2 F320 bricked phone, help! - G2 Q&A, Help & Troubleshooting

Hey guys. Today i've bought LG G2 F320L korean mode. So i was happy because it was cloudy 3.3 already installed but...after reboot i see green logo Apps Watchdog Bite! I can't enter download mode, my pc can't recognize my device and i can't enter the recovery tho... Any ideas to help me unbrick my LG G2 ? I hear something about flash stock .bin files which i have on my pc but no idea how to do it when my pc can't find my device.. help

After ordinary reboot ? No wipe ?

@bender_007 mate i can't do anything. i just bought it when cloudy 3.3 was installed. now as i said i cant enter into recovery, download mode and it isnt recognized by pc. + this green apps watchdog bite...
god damn, any ideas?

Can you take a picture? Green dog..?
Poslano sa mog LG-D855 koristeći Tapatalk

To be honest i cant do at the moment using Nokia Asha 303 so this camera is horrible but i can tell you what exactly it says.
Apps Watchdog Bite!
DemiGod Crash Handler : Apps Watchdog Bite!
Press key to choose Dload Mode or Reboot
1) Volume Up: Dload mode
2) Volume down : reboot
If you choose Dload mode please do following action
1) Dload Mode, please connect usb
2) get the ram dumb image using QPST Configuration
Board info:
rev, 1.1 speed.pvs : 1,2 serial : 003455520e08aba8
if it something tells you it would be cool. i tried to go download mode but after it says "entering download mode" its something like lag and i cant do anything. Also tried combo (on turned off phone) power+vol up so korean lang appeared. Sorry for my bad english, hope u understand what i told.
And btw wondering how prev owner just installed Cloudy 3.3.. cuz he had same problem with this kind of brick, but he didnt answer me
edit; now i can be in mode in what i can't see anything on my lg screen ( pure black) and if i plug in my usb cable i see mass of partitions along with " switch off qhsusb_bulk" what to do ?

Qhusb bulk - refer to 'lg g2 fix no download mode, no recovery' and use SRK TOOL by somboons
Poslano sa mog LG-D855 koristeći Tapatalk

Hey guys. still got problem. It was flashed succesfully (SRK tool to fix dload mode + .tot files) had 4.2.2 android but sometimes it was rebooting and catching bootloop and sometimes it booted succesfully. Tried to fix it by LG support mobile tool, and it was closed to finish repair my firmware but when it rebooted into download mode (progress was like 13% it went into qhsusb bulk so it was interrupted. Now when i boot my g2 i see in right corner small letters like error security boot then it goes to white window ->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no download mode (can't even see it cuz whatever i do is this white window), no recovery, no qhsusb bulk. sometimes when i plug in usb between pc and my g2 i hear plugin sound. and in device manager is something like LGE android COM4 ? something like this...
Is it any other way instead of http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 ? my model is F320 but guide is about Dxxx. Guys really help me, seems like its bricked forever

Related

[Q] Bricked D802, Any help?

Hello, I'm new to this forum, and like every newbie, I'm asking for help.
My problem is this:
I bought a LG G2 D802 32GB, it was rooted and with CMW. I intalled LG Mobile Support Tool and it appeared that there was a new firmware (apparently 80220C) so I installed with that software, but when it finished, the phone restarted and got stuck on the LG logo. The only thing I could do was to get into Fastboot mode and from this post: http://forum.xda-developers.com/showthread.php?t=2477595 I managed to get into the Download mode (That one with the Firmware Update message: btw it appears: "USER B100 ROOTED"), the thing was that I didn't know which exact version of 80220B had my phone, so instead of getting the laf.img mentioned in the thread (the one of cms88168 was 80210B), I used one named: "Europe OPEN D80220B_00". In that way I managed to access Download mode. I then proceeded to use LG Flash Tool 1.8 (Used first 2014 without sucess) both from: http://forum.xda-developers.com/showthread.php?t=2432476 and this message appears:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW, I used DLL: LGD802_20130912_LGFLASHv160.dll
And the rom I extracted the laf.img was a KDZ (Europe OPEN D80220B_00.kdz), the one I try to install with the LG Flash Tool is a TOT (BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.tot)
Please, if someone can help me to fix my phone (I've only had it for 10 days, no way to return it), please.
Thanks in advance and cheers.
UPDATE: I used the DLL from the KDZ file and the same TOT and the LG Flash Tool (v1.8) reached a higher status in the update but failed with this message:
And now it gets stuck in the "Download Mode" screen and in Device Manager theres is no track of the phone.
I don't really know what to do.
Why don't you try with kdz ?
Here
+ you took the ota or ?
Hi, thanks for replying.
All this happened because I updated it connected to my PC.
I tried that and it throws this error: "Problem with communication between cell phone and PC"
The phone won't enter in download mode and when I turn it on, stuck at logo and connect it to PC, it appears like this: "LG AndroidNet USB Serial Port (COM41)" -41 set by me.
Is there a way to access the phone through COM to restore partitions?
No adb or fastboot working.
What can I do?
Hello, I want to update the info about this post:
I definitively had to return the phone for refund.
Now I own a Z2, it's a great phone, although the G2 is a great phone too.
If possible, please close this thread.
Cheers.

Verizon G2 Bricked! Demigod Crash Handler! No Nothing!

I was going back to stock using the KDZ method and USB cable came unplugged during the process. It gets the secure boot error and is stuck in the DemiGod Crash Handler. Computer only recognizes the COM and Modem. NO ADB, FASTBOOT, DOWNLOAD MODE, RECOVERY, SAFE MODE, NO NOTHING. Anyone have the same thing happen?
NBreunig3 said:
I was going back to stock using the KDZ method and USB cable came unplugged during the process. It gets the secure boot error and is stuck in the DemiGod Crash Handler. Computer only recognizes the COM and Modem. NO ADB, FASTBOOT, DOWNLOAD MODE, RECOVERY, SAFE MODE, NO NOTHING. Anyone have the same thing happen?
Click to expand...
Click to collapse
This exact thing happend to me yesturday ... Freaking DemiGod Crash Handler Error mesg on screen !! if u find the solution please do let me know as well
maxpain007 said:
This exact thing happend to me yesturday ... Freaking DemiGod Crash Handler Error mesg on screen !! if u find the solution please do let me know as well
Click to expand...
Click to collapse
Plug into your computer via usb. Open device manager. If you see qhsusb_bulk then follow this guide to fix. Unfortunately I didn't get that therefore there is no fix...However I was very grateful because Verizon let me get an early upgrade. I now have a G3.
DemiGod cras handler: critical error
Good day, if flash bootloader changer on my lg g2 verizon on cloudy3.3...
this is what i got at the end of the day. Is their a way out please help me out. What do i need to do to make my phone come up again because it will not boot saying somthing like....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help
Well bro I was stuck with the same issue..
This happens to me when i flashed a wrong twrp recovery for lg g2 d801 and it was stuck in critical error i was also unable to access download mode ..
But my Good luck was that i recovered it by doing silly thing ?
So i do following things. But make sure u know the corrert version of your lg g2 to flash kdz file with lg flash tool and also must have lg drivers intalled.
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode

Lg g2 completely dead (not detecting device as qhsusb_bulk)

is my Lg g2 completely dead
1) Lg logo is not coming(COMPLETE BLANK SCREEN)
2)unable to enter recovery mode
3)unable to enter download mode
4)not detecting device as qhsusb_bulk
5) when connected to computer a popup message(you need to format the disk before using it) and it is showing total 13 drives in which one drive has the image folder.
it is working fine until today afternoon when i rooted my phone running on stock lollipop with LG_One_Click_Root_by_avicohh and installed twrp recovery using autorec app and after that rebooted phone but it is not rebooted and above problem came . dont know whats went wrong with this process
please help me with this
krnkrsadula said:
is my Lg g2 completely dead
1) Lg logo is not coming(COMPLETE BLANK SCREEN)
2)unable to enter recovery mode
3)unable to enter download mode
4)not detecting device as qhsusb_bulk
5) when connected to computer a popup message(you need to format the disk before using it) and it is showing total 13 drives in which one drive has the image folder.
it is working fine until today afternoon when i rooted my phone running on stock lollipop with LG_One_Click_Root_by_avicohh and installed twrp recovery using autorec app and after that rebooted phone but it is not rebooted and above problem came . dont know whats went wrong with this process
please help me with this
Click to expand...
Click to collapse
you have to open it. 100% refurbished phone
Thanks bendor_007 for reply. but my phone is not refurbished and it is almost 3 years old with good working condition. when it is disconnecting from desktop some amount of light coming from top of screen for 1 or 2 seconds. do you think i have to follow http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
please reply me.but how to know whether it is stuck at boot logo or not
once again thank you very much
Could you please try to record it? Short video or describe in more detail? Also try looking up device manager while connecting the phone. + what variant.---ignore pls, I haven't seen it's showing the drives
Just ise srk tool which will fix the issue
Sent from my SM-G930F using Tapatalk
Thanks again bender_007 . please find below attachments for more details about showing drives before and after connecting to computer and for device manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 3856857
and please find this https://youtu.be/7fZzK4czzgs video for the problem described by me in last post and
i am using lg g2 d802 international version

Download mode bug

Hello,
My LG G3 (D855 16go) is hard bricked.
I have the qualcomm 9008 Usb connection and I have flashed correctly, following the topic (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
When I flash sbl1 at the end, I try to get in download mode .
I see the screen download mode during 2 sec, and then black screen and I get back the qualcomm 9008 USB connection.
I have tried many times to flash (V10 tot or V20), but I don't know what to do.
Could someone give me a solution, please?
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS2:With flashtool, I put the port 41 and when I want to flash i got the Download FAIL!!, Model Information Check Fail (with PID:NULL,IMEI:NULL,Model(nothing),DLL : D855
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,
bonilla said:
Hello,
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,
Click to expand...
Click to collapse
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.
I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.
Never_Sm1le said:
I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.
Click to expand...
Click to collapse
I got this message and i don't have more logs :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fOxunO said:
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.
Click to expand...
Click to collapse
I tried the PS3 (change with CS Emergency) and it is the same, stuck at 4% with the same screenshot than above.
When I try to power on , I have the DemiGod Crash Handler , and when I press bottom up to go to download mode, I have the message on my phone :'Volume up is pressed Jump to dload Mode' and in some cases I have a blue led or sometimes i got a green led.
When I press volume down, it reboots and i got the same...
bonilla said:
I got this message and i don't have more logs :
Click to expand...
Click to collapse
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?
fOxunO said:
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?
Click to expand...
Click to collapse
When i power on , I got the Demigod Crash Handler
I press up to go to Dload Mode.
Then, I launch FlashTool 2014, I select the kdz and everything and then, it goes to 4%
and without pressing, I have this screen poping :
and even if I touch nothing, it doesnt change anything (In my phone , I have the demigod on the screen)
For information, I got this USB connection
Other question:
When I reflash with boardiag , each time when i finish with sbl1, i poweroff /poweron (botom up pressed) and I cannot access download mode, it goes black and I have the qualcomm 9008 usb port.
Could someone helps me with that problem ?
Thanks

LG L Fino D290N boot certification verify error, download mode doesn't work

Hi xda!
Today I woke up, ate breakfast, cleaned my teeth and then turned on my LG L Fino. And then.... I saw an error like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is going on? Yesterday it was working.....
I can't flash stock .kdz from recovery, because it doesn't work.
I heard about flash using .tot method, but I can't find any .tot file for L Fino.
What should I do now?
And i have same problem
My LG L FINO D290n is show me thats message.
"ERROR: Boot certification verify"
[1110]: Secure booting error.
Can anyone know how to fix iz?
Here is the .tot file: https://drive.google.com/file/d/0BxxUwn_322_KOVhPRjEzb2M0QVk/view
download mode does not work?
Yeah,download mode not work,when i press vol+ then connect usb my screen is show purpple message with text
DBI Apps Watchdog Reset!
DemiGod Crash Handler : DBI Apps Watchdog Reset!
Board Rev.:1.0
Ram dump mode.
Option : SD card ram dump mode.
Push below files to sdcard before test.
rdcookie.txt, rtcookie.txt
Please do following action.
1)Ram dump Mode. Please connect USB.
2)Get the ram dump image using QPST Configuration
3)If sdcard ram dump enabled just wait for reboot
4)Collect ramdump files from your pc or sdcard)
5)Send e-mail to [email protected]
Do you have twrp?
If yes,
does it still work?
PS: I can't help you if you are offline all the time
Yes friend,i have twrp because im try to use all of this solution and nothing happend.
I think this is problem with emmc chip "maybe"...
You tried the .tot method 4imb0t mentioned?
Here is a flashable .zip for the D290N: https://drive.google.com/open?id=0B0rYlJ-tfKhNcFRfdnFlbjlMa3c
I created the zip for myself, because my download mode didn't work.
After flashing, TWRP will crash.
Then you simply have to enter the download mode and flash a kdz.
BUT I'm not sure if this is going to work.
DISCLAIMER:
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING.
I WILL NOT TAKE ANY RESPONSIBILITY FOR BRICKED PHONES OR LOST DATA.
Sorry for long absence, I had no time.. But now I have it, so I want to repair this phone and...
now my Fino doesn't power on... I tried:
1) Power On normally using Power Button
2) Go to Download Mode
3) Remove battery and go to Download Mode
Nothing works..
But when I plug it to computer everytime I hear that Windows sound and in Device Manager I see:
But the screen is still off...
When trying to flash using TOT Method I see:
What to do now?
So the recovery doesn't work?
Yes. Recovery doesn't work, I can't boot to recovery, I can't even boot to Android and the screen is all time black.
You tried this guide here, right?
I just tried it and the result was:
But the phone still doesn't boot and still is being detected as Qualcomm HS-USB QDLoader 9008
Maybe you have to do the last step from this tutorial.
Sry that I can't really help you, but I gave my old L Fino to my mom like a month ago.
4imb0t said:
I just tried it and the result was:
But the phone still doesn't boot and still is being detected as Qualcomm HS-USB QDLoader 9008
Click to expand...
Click to collapse
Did you try to boot in download mode and flash kdz ? It's the last step from the tutorial.
I own an LG D290n . I had to do a factory restore via buttons after a Google update bug. It was crashing some Google service and couldn't do anything to fix it. Strangely neither factory restore worked giving me the same exactly error. I finally downloaded the latest Rom I could find I think it was 4.4.2. I pushed it using official Lg Utility from fino page and worked like it should be just fine. After about 2 months the problems continued , the phone stucked at boot with the known pink message dbi error demigod crush etc unfortunately I didn't took a photo. After reading a lot found a guide for unbricking my phone. UNTIL THEN couldn't go into dl mode or anything except factory reset giving me the same error. After the guide using qfil the phone stayed black . Boarddiag passes ap but not emmc. The phone is stuck on 9008 or if I play a little in diagnostic 9006. I played with battery and cable only , the buttons don't work tried vol up . Any guy want my teamviewer to check? Thank you in advance
if boarddiag is not passing emmc test it means your emmc is faulty/dead, no fix for this that I know unless you replace eMMC.
LG DM-01G
I am facing same error, for LG DM-01G.
help please
How can i open my LG LFINO. It already dead set. But before that i shown that was a watchdog error in the screen.

Categories

Resources