This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too
Related
I have the galaxy note 3 n900 exynos model.
my baseband version is : n900ddudna1
kernel version : 3.4.39-679903 / SWDD5518 #1
build number : UDNB2
every time I try flashing with odin ( 3.09 / 3.07 ), odin resets my device after 2 seconds saying PASS, but when i go to recovery , it is still appears to be official samsung recovery. doesnt matter if i flashed the latest CWM or TWRP....
when i try installing CWM from zip file over the external SD card. it starts to install the recovery, and then suddenly i get the following messege : "footer is wrong signature verification failed" . and it reboots the phone and nothing has changed...
I had installed CWM recovery in the past with some roms, but this entire hell trip started after i install new hong kong official NBD4 rom...
the only thing i can do right now, is flash original verified samsung roms from sammobile website...
any idea what could be causing this / a solution... ?
thanks in advance..
Bump
Untick reboot in ODIN. After flash pull battery and go to recovery, say yes when it asks to disable stock recovery something after selecting reboot, can't remember what its called as its been a while and I only needed to do it once...
ultramag69 said:
Untick reboot in ODIN. After flash pull battery and go to recovery, say yes when it asks to disable stock recovery something after selecting reboot, can't remember what its called as its been a while and I only needed to do it once...
Click to expand...
Click to collapse
what happens is, there is a blue line that shows the progress of the CWM flash in downloading mode... once the blue line gets to the end it just stays this way and Odin says : "pass". i turn off the phone , take out the battery , replacing the battery back to its place. then i press volume up + power button + home button and a red android symbol appears. then its doing something and says " rebooting in 10 seconds" . when it finishes to reboot , i still have the original stock recovery and i still cant install any Roms on my device while getting an error saying " signature verification failed"...
im starting to get really despearate here...
cant install CWM in Note3 (N900DDUDNA1)
ransz said:
what happens is, there is a blue line that shows the progress of the CWM flash in downloading mode... once the blue line gets to the end it just stays this way and Odin says : "pass". i turn off the phone , take out the battery , replacing the battery back to its place. then i press volume up + power button + home button and a red android symbol appears. then its doing something and says " rebooting in 10 seconds" . when it finishes to reboot , i still have the original stock recovery and i still cant install any Roms on my device while getting an error saying " signature verification failed"...
im starting to get really despearate here...
Click to expand...
Click to collapse
I am having the same issue. I am from Bangladesh. Gave couple of tries. my knox has already went to 3. but after successfull installation again and again i go back to the stock recovery.
Anyone help plz !
Help !
hot_dew said:
I am having the same issue. I am from Bangladesh. Gave couple of tries. my knox has already went to 3. but after successfull installation again and again i go back to the stock recovery.
Anyone help plz !
Click to expand...
Click to collapse
Help !
ultramag69 said:
Untick reboot in ODIN. After flash pull battery and go to recovery, say yes when it asks to disable stock recovery something after selecting reboot, can't remember what its called as its been a while and I only needed to do it once...
Click to expand...
Click to collapse
Thanks
I unchecked Auto Reboot removed battery. volume up + power button + home button. used CWM for SuperSU all went ok.
moodyboy said:
Thanks
I unchecked Auto Reboot removed battery. volume up + power button + home button. used CWM for SuperSU all went ok.
Click to expand...
Click to collapse
You could always try TWRP if you still can't get it to work or Phil's touch recovery.
Note:
Goo doesn't install TWRP for the note 3 the binary to install maually is on their site
ultramag69 said:
Untick reboot in ODIN. After flash pull battery and go to recovery, say yes when it asks to disable stock recovery something after selecting reboot, can't remember what its called as its been a while and I only needed to do it once...
Click to expand...
Click to collapse
Worked for me, thanks!
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
What is the model number displayed in download mode?
Thanks a lot for your reply
It states:
PRODUCT NAME: GT-I9500
CURRENT BINARY: SAMSUNSG OFFICIAL
SYSTEM STATUS: Official
And in recovery mode it states Android Recovery Mode 3e
Any help is welcomed !
Make sure you're using the original cable, and move the cable to a different port if necessary. This is an Odin issue, not phone.
Thank you !
Tried with 2 different cables, will look for a third one.
Even if a see on the phone the "blue bar" that means download in progress, and Odin says OK, PASS, it can be the cable ?
Thanks a lot for your help
BTW if you know how to remove the Screen Lock password with the Stock Recovery, that sis welcomed as well
I have issues all the time with my S4 and often it just comes down to how I am pressing the buttons to get into other the boot download mode or the custom recovery rom. I swear I press them exactly at same time ,but then I do it differently and it works.
Also found cable / USB ports can affect it too. My home PC for some reason is terrible for using Odin, but then my laptop it works fine.
josecheja said:
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
Click to expand...
Click to collapse
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Lennyz1988 said:
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Click to expand...
Click to collapse
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
josecheja said:
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
Click to expand...
Click to collapse
Just hold the power on button until it reboots or remove battery.
Lennyz1988 said:
Just hold the power on button until it reboots or remove battery.
Click to expand...
Click to collapse
Lennyz1988
It worked !!!! thanks a lot Lennyz !!
Tried hundred times.....even unchecking the Autoreboot Option in Odin in past tries, but seems with the wrong Recovery version.
I am on TWRP recovery now !!!
Now let me see if I can run LockScreen_Security_bypass...the reason I needed Custom Recovery...)
Hello,
I´ve got a problem with my Samsung Galaxy S5
The History:
I bought a Samsung Galaxy S5 SM-G900f from Ebay with a Software Problem. The seller said, he try to flash a Custom Room like Cyanogenmod, he don´t know which)
The flash failed (i don´t know why). Now the S5 have a brick.
I tried so much, but i can´t repair it, pls help me.
The Problem is:
I can not start the Recovery Menü to flash a new Custom room. Always i tried to start the Menü, there is just a text "recovery Booting", then the phone restarts after round about 10 sec.
So even if i tried to start the S5 normally without recovery Menü, it´s just the Samsung Galaxy S5 Logo power by Android, then the phone restarts all the time.
The only thing i can do is start the download mode.
Things i tried:
- Firmware installation about Kies (pass, but still the Same Problem)
-Firmware Installation about Odin (pass, but still the same Problem)
- CF-Autoroot flashing (pass) then i tried to flash a recovery like PhilZ but then when i tried to open the recovery it`s "Recovery is not seandroid enforcing" Set Warranty bit
I tried so many firmwares but still the same Problem. Now it is installed Lollipop 5.0 G900FXXU1BOI3_G900FDBT1BOI1_G900FXXU1BOI3_HOME
There is no chance to repair it over ADB oder Fastboot, cause USB-debugging is disabled
Maybe you can help me and help me to stop spend all my time for this phone, cause im interested to know how i can repair it.
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
.
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
Try this hold on (power volume up and home) then do not release until recovery mode boot
sh4dow6oy said:
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
Click to expand...
Click to collapse
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
With some of the newer LP based firmwares, twrp 2.8.7.0 klte is the only version that works.....
Other than that, you might find it necessary to odin back to KitKat (flashing a pit file too) and try 'towelrooting' your device.......
BE WARNED.......If you *do* flash a pit file, make sure it's the CORRECT pit for your device.....In some cases, flashing the wrong pit will permanently kill a device.
http://i.imgur.com/rVnFwJM.jpg
So i had try it.
1.)hold on ( volume up and home) then do not release until recovery mode boot
--> The phone always restart no recovery is possible
2.) I try to install on LP the TWRP 2.8.7.0 Still the Same error "recovery is not seandroid enforce" Set Warranty bit: recovery
Before i root the device with CF-Autoroot and it´s pass
3.) I downgrade to 4.4.2 with a full package of Firmware with CSC,BL,AP,CP and a pit file.
The downgrade pass, when the phone starts it says recovery booting in blue script, then the phone restarts. I can´t intstall towelroot, cause the system is not booting, so i´d tried to install CF-Autoroot (pass) and then also the TWRP 2.7.0.0 pass but not booting and then 2.8.0.0.
But still the same "recovery is not seandroid enforce" Set Warranty bit: recovery
If you got a pass on your KK flash, you have a stock recovery......
Have you tried booting into that recovery and wiping cache and factory resetting? It is necessary to do this when downgrading......
http://i.imgur.com/rVnFwJM.jpg
Yes it was a KK stock recovery.
I tried to boot in this recovery, but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds.
It´s not possible to wipe cache or make a factory reset, cause the recovery is not booting. That´s my problem. Also when i have flash the stock firmware i tried to go into the recovery but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds. ( 4.4.2 and 5.0)
I´can´t flash a custom rom cause the recovery is not booting. I´ve no idea
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
http://i.imgur.com/rVnFwJM.jpg
Very familiar -
https://dl.twrp.me/klte/
Flash TWRP 2.8.7.0 .TAR (Do not unzip) with ODIN 3.10.7 - in Download mode (Volume Down & Home & Power)
It will say "recovery is not seandroid enforce" Set Warranty bit" at the top when you boot into recovery, give it a few seconds and you should see the TWRP blue splash screen, and then recovery should load up
Then flash a custom ROM from TWRP
--
If that all still fails, try flashing the PIT file for the G900F along with a Stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract this one so it is .PIT, and add it to ODINs PIT section
If that still fails, try flashing just the PIT file with ODIN, and then the TWRP 2.8.7.0 with ODIN and see if you can get in that way
Or PIT and TWRP together
Try a combination until you get back in
Also try different versions of TWRP from 3.07 up to 3.10.7
keithross39 said:
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
Yes i did, than the it happen what i wrote upside
What do you mean with "@'detection' does the OP's situation sound familiar?....."
Click to expand...
Click to collapse
It sounds familiar because it's happened to many other people recently too, although TWRP usually fixes it
Follow my instructions above
No chance guys,
i´d tried to install all TWRP which i found once in 5.0 and also i tried to install on 4.4.2. But always the same mistake. (recovery is not se.....)
Now i´ve tried to install CWM-Recovery and now there is no mistake like upside. Now in blue "recovery booting" and in yellow set warranty bit: recovery
But the recovery is not booting, the phone always make a restart. I´d also tried to install the recovery without auto-reboot in odin. But no help.
I don´t understand, cause when i flash a Stock Firmware, the recovery menu ,in my opinion, it have to start, but it doesn´t. Maybe i have anexpensive paper weight now
I search the internet to install a Custom room over Odin, but i don´t find any results, so i think it is not possible.
Do you have more ideas? Pls help. Thanks
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
check PM
bowzee said:
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
Click to expand...
Click to collapse
Another idea?
Joda899 said:
Another idea?
Click to expand...
Click to collapse
Ithink you should try re instal original firmware using odin and get ur warranty back then fix it on samsung
I found a trick that seems to help slightly, until an actual solution is published. During a misbehave episode, assuming that something shows up (which is not always the case):
1) press <power + home + vol-down> until the download thing shows up
2) press <up-arrow> so that it actually gets into download mode
3) press <power> until the screen turns off and immediately release (otherwise it will try to reboot); this makes it stay off
4) let it "rest" for a certain period of time (could be 5 minutes or more)
5) back to normal
Did u root your device vai CF auto root? Did it work?
Hi All,
Got a S5 G900I here that's doing my head in! Stuck in the infamous bootloop at the Samsung logo.
I have been a long time reader of these forums and have prior experience from flashing Samsung phones but this one is driving me mad!
I can put the phone into Download mode without an issue, phone is detected in Odin and I can flash any firmware I try to it (Have tried original 4.4.2 , 5.0 and latest 6.0.1 firmwares from SamMobile). Odin goes through the entire process, reports as "Pass" but then the device goes straight back into the reboot loop and will never fully boot up.
I can also use Odin to push TWRP / CWM / PhilzTouch recoveries, however the device will never boot into the recovery partition. I get the blue "Recovery Booting" message briefly, then the device bootloops again.
Does anyone have any further suggestions to try and get this phone operational again?
I have tried multiple versions of Odin, multiple firmware versions, different computers, different USB cables, different USB ports etc.
I look forward to hearing back from you
Try this :
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
andra.soul.catcher said:
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
Click to expand...
Click to collapse
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
AS93 said:
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
Click to expand...
Click to collapse
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
andra.soul.catcher said:
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
Click to expand...
Click to collapse
Thanks for the quick reply.
Yes when I am booting into recovery mode and can see the blue text "Recovery Booting" in the corner of the screen I let go of the power button - device still boot loops.
Have flashed recovery then removed battery - still cannot get it into recovery.
I have seen some Samsungs have hardware issues with their NAND chips but in these cases there are a lot of errors relating to NAND displayed on the screen when I've seen it be a hardware issue. None of these appear on this phone - convinced it has something to do with software.
I found these threads - exactly the same issue as me, and at the end it says they fixed it by flashing a specific bootloader however I have a G900I and the phone in this thread was a G900F
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926/
https://forum.xda-developers.com/galaxy-s5/help/samsung-s5-sm-g900f-stock-flash-caused-t3771105
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926
Have tried countless different versions of ODIN / recovery / stock firmware , including the "service firmware with the separate files G900IDVU1BOE1_CL4826466_QB4839040_REV00_user_low_ship_MULTI_CERT"
Problem solved! i was installing the wrong version of twrp this is the correct version: https://eu.dl.twrp.me/j5xnlte/
I'm using SM-J510H
So I installed samsung drivers.
I even installed ADB and it's drivers (now i have samsung android in the device manager)
I downloaded TWRP for j53gxx:
https://eu.dl.twrp.me/j53gxx/
The .tar for odin (twrp-3.4.0-0-j53gxx.img.tar)
I did the OEM unlock and debugging thing I even got the notification that the computer was trying to access blah blah I did allow always.
Put the phone in download mode (Down + Home + Power)
Press up to enter download mode.
Connect the phone.
Untick reboot in odin.
Use the ap to select the correct file
Start success!
I try to reload into recovery tried so many different ways even the adb command to reboot into recovery. All I get is a little thing on the top left saying warranty bit recovery and then the screen is black.
It doesn't load into the default recovery it just stays black. I need to take the battery to rest...
I tried with adb but when i force it to load up into download mode (adb reboot bootloader)
adb doesn't recognize the phone anymore
I've now downloaded the android ask maybe that will solve things lol but does anyone have any advice please?
Should I consider installing a different recovery? like maybe CWM?
It has a costume rom on i guess it says "Hebrew by daniel mouyal for bt" in the about tab in the settings...
I tried using ADB to install but when it's in download mod it can't find the phone so when i enter the install command:"fastboot flash recovery twrp-2.8.x.x-xxx.img" it says: "waiting for device"
Well I've been installing the wrong version of twrp lol sry!
So just in case someone else hits the same problem it's not the twrp i posted before but this one:
https://eu.dl.twrp.me/j5xnlte/
When recovery is finished flashing in Odin, remove your battery to turn the device off.
Then put the battery back in and press vol+ and power button and home button at the same time.
Your device should then boot into twrp.
If you reboot before doing this the android operating system will ovewrite twrp with stock recovery and you will have to start the process again
Also you used the wrong twrp. J53gxx is 2015 model j500h and j5xnlte is j510fn not j510h. You must be careful or else you may seriously damage your device.
Use this twrp here for your device j510h
garylawwd said:
When recovery is finished flashing in Odin, remove your battery to turn the device off.
Then put the battery back in and press vol+ and power button and home button at the same time.
Your device should then boot into twrp.
If you reboot before doing this the android operating system will ovewrite twrp with stock recovery and you will have to start the process again
Also you used the wrong twrp. J53gxx is 2015 model j500h and j5xnlte is j510fn not j510h. You must be careful or else you may seriously damage your device.
Use this twrp here for your device j510h
Click to expand...
Click to collapse
Thank you for the response!
I managed to figure out the issue it was the wrong twrp version.. I can't update the title though
That's no problem.
What I would suggest though is to post how you fixed your issue in case anyone has problems in the future they can be referred to your thread here
garylawwd said:
That's no problem.
What I would suggest though is to post how you fixed your issue in case anyone has problems in the future they can be referred to your thread here
Click to expand...
Click to collapse
I did in my second post I posted the correct link to the correct version of twrp
I'll edit it so it's more visible