I do not know how but my display is screwed up!!
The phone display is QHD but the digitizer seems to be set to fullHD! why? how?
I've tried reinstalling a couple of original firmwares to no avail. The the problem is the same.
Now that the phone has been flashed stock original I now can not even finish the install process.
Does anybody have a clue how to fix this!?
Update:
I was able to get passed the initial setup and connected my logitech bluetooth keyboard to the phone. Now I can finnish the install and hopefully adjust the digitizer. But how? I still have no clue...
Thank you in advance for any help in this matter.
Related
i rooted the tab with super once click and all went ok. then i installed lcd density changer. it asked me for root privileges, and then rebooted my tab. but now my tab bibrates once, then three times, once, three and continues without booting....please help me i have an european tab with factory jk5 firmware. please tell me i can save my tablet
only black screen with the tab that keeps vibrating, alternating one vibration and three vibrations...no boot.
Same happened to me. Twice! Gonna need to reflash with heimdall or odin. Only fix I could find.
Lcd density working fine for me on overcome and MoDaCo though.
Edit: seems to be an lcd density issue. My tab didn't like certain densities on stock firmware, others worked fine
Sent from my GT-P1000 using Tapatalk
could you please help me reflashing the jk5 stock firmware? i'm totally new to android. can i contact you with msn, skyper or anything you prefer? i would really appreciate.
a simple hard reset isn't gonna help me out?
could you please help me flashing my tab to jk5?
do i need to pass through jj4 and then jk5 without marking "repartition", or can i reflash directly to jk5?
culd you please quickly explain how to set up odin?
thankyou very much
everybody's help is obviously well accepted.
ok solved googling....moderator please close
Hello, a long long time ago I installed an Android ROM onto my phone because we all know that WM 6.5 was a total fail. Everything up until now my phone's touch screen completely stopped working, no response at all. The only thing that is functioning properly are the buttons.
As of right now I have tried installing a new ROM, but I can't because in the ROM that I have, the connection default is to charge the phone but I can't access the menu after countless tries getting to it. I also looked up past threads with those who had similiar issues, but I want to know if there is any new methods to fixing this issue. Any help is greatly appreciated, thank you.
Hi to everyone, I have a BLU Studio 5.0 c HD (not rooted) which has been acting strangely for the last two days. The last app I installed was IFTTT app, everything seemed to be fine until some apps crashed and so I rebooted my phone, but now my phone wont get past the BLU logo screen. I entered into recovery mode and reset my phone to factory settings but with no luck.
What I would like to know is, is it possible to fix my phone if I don´t have root access? And how would I go about doing that?
And if I need to flash my phone, how do I do that if I cant get into the system?
All help will be greatly appreciated.
Thank you
Istan86 said:
Hi to everyone, I have a BLU Studio 5.0 c HD (not rooted) which has been acting strangely for the last two days. The last app I installed was IFTTT app, everything seemed to be fine until some apps crashed and so I rebooted my phone, but now my phone wont get past the BLU logo screen. I entered into recovery mode and reset my phone to factory settings but with no luck.
What I would like to know is, is it possible to fix my phone if I don´t have root access? And how would I go about doing that?
And if I need to flash my phone, how do I do that if I cant get into the system?
All help will be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try asking here:
Studio 5 Q&A, Help & Troubleshooting
The users who got the device may know how to solve this.
Good luck!
nilac said:
Hi and thank you for using XDA Assist
Try asking here:
Studio 5 Q&A, Help & Troubleshooting
The users who got the device may know how to solve this.
Good luck!
Click to expand...
Click to collapse
Hi Nilac, and thanks for your reply.
As I am a new member I can not create a new thread.
Any help will be greatly appreciated.
Istan86 said:
Hi Nilac, and thanks for your reply.
As I am a new member I can not create a new thread.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Thread will be moved soon in that section.
Regards
I'm having a similar problem
Do I need need to start my own thread?
Hi,
I'm having a similar problem with my phone. It displays the BLU - BOLD Like Us startup screen (white with black font) and then after a few long seconds it just stops on a mostly black (faint light) screen.
I've tried recovery mode. Deleting cache and then Reset etc. with no luck. Removed SIM and SD Card etc.
Anyone else have this issue and been able to work past it by chance?
Appreciate any help on this, thanks!
Same here!
Natetronn said:
Do I need need to start my own thread?
Hi,
I'm having a similar problem with my phone. It displays the BLU - BOLD Like Us startup screen (white with black font) and then after a few long seconds it just stops on a mostly black (faint light) screen.
I've tried recovery mode. Deleting cache and then Reset etc. with no luck. Removed SIM and SD Card etc.
Anyone else have this issue and been able to work past it by chance?
Appreciate any help on this, thanks!
Click to expand...
Click to collapse
Exactly the same with my 5.0 LTE. I managed to install a firmware with QFIL.
Everything was perfect, and after 2 weeks...back to the app crashing and finally endless loop of the Blu Logo!
Anyone had found a real solution or what is causing the problem?
Same here!
cbasrud said:
Exactly the same with my 5.0 LTE. I managed to install a firmware with QFIL.
Everything was perfect, and after 2 weeks...back to the app crashing and finally endless loop of the Blu Logo!
Anyone had found a real solution or what is causing the problem?
Click to expand...
Click to collapse
I have a NON ROOTED Studio 5 LTE, Using Qfill I´m always manage to have the phone up and working flawless, but after a couple of weeks it start messing around until it finally sticks on the Boot Logo.
I´ve tried without the SD card, with the SD Card, with the SD Card formatted, with and without the SIM card and it always ends with the same problem. I´ve called BLU, but no proper solution was given....
Anyone did find the solution??
hi guys, i have a studio 5.0 c hd, i have change the OS like a 5 times, im testing a new ROM, my problem is the same, when i reset the phone, the OS crash and stay in the logo screem forever, i have used the sptools and i have used the drivers... all this download from diferent pages... if anyone knows a solution for this problem pls reply here... if anyone want the list of programs i can give u
Use flash tool and flash system image in android menu flash tool and flash
Hi guys,
after finally getting a new screen for my D802 (whole other story) I installed it and it worked great. Next step was to update to a newer ROM and Android etc. so I wanted to try out Lineage 14.1.
I got AutoRec to install TWRP, which went fine until it rebooted. The display started showing nothing but white stripes.
Because of anti-spam reasons I can't link to external websites and I can't find any way to upload pictures so I'm cheating with the link and hope that is okay, if not please delete the link and tell me how else I can show you pictures.
PICTURES HERE imgur.com/a/VcLR3
The first two are during the "LG" boot animation, the latter two are when it has loaded up the OS (I assume).
Did I somehow destroy my new display? I've looked around and found similar problems for some obscure ROMs and such, but it was never the whole display but rather just a few lines to the side, nor was it with such a simple, everyday task like AutoRec that seems to be working for a million people.
Is there anything I might be missing?
Assuming the display actually IS broken and I replaced it again, would the current configuration kill the new one as well? Since I don't have even 1% of screen to play with I don't see myself changing anything back to stock or so.
Thank you so much for any help.
Edit: I just found this thread https://forum.xda-developers.com/showthread.php?t=2680948, do you reckon this is my problem? There are no pictures, sadly. And if yes, how on earth can I do anything with no screen?
Just reflash stock kdz
Sent from my SM-G930F using Tapatalk
Thank you, I flashed some stock stuff and the display is working again. I would never have thought it was a software issue. Thanks!
Hi guys!
My brother purchased a Lenovo ThinkPad 1839XF1 for his son, which is running CyanogenMod, and was converted to Android 4.1.2, but the touchscreen does not work. I´ve tried to change it with the physical button, which actually displays on the screen that the touchscreen has been activated, but it actually does not work.
I would like to know if there is any stock rom that can resolve this problem, or if there is another way to set it up. I already reviewed the setting, and there is no other way to enable/disable the touchscreen. I also forgot to mention that the Camera does not work neither, and an error is displayed when trying to use it.
I was thinking about the chance to use the update on Lenovo to try to change it, or if there is any additional steps to try to recover it, as I´m not able to find anywhere the stock ROM.
Thanks in advanced.