Please help if you can
My first 32gb Nexus 7 had no problems showing up as an mtp device on windows 7.
Am running a rooted 4.1.2 and all is well with mtp as well as adb, toolkits, etc.
I purchased one more as a gift, and that one can only be set to ptp in the internal storage settings.
If I try to set it to mtp, it takes, but does not show up in windows or in adb.
The only way to see it or use adb or a toolkit on it, is to set it to ptp which shows up as a camera with read only permissions.
Both tablets are using the same rom etc.
Have tried this on 2 PC's (win 7 as well as xp)
Any Ideas?
Thanks
On my (rooted) Stock 4.2.1 tablet, MTP mode only seems to show up if ADB Debugging is enabled.
Sort of odd; PTP will work whether or not ADB Debugging is turned on, but MTP only shows up when ADB debugging is also enabled.
If you have not enabled "Developer Options" on the tablet, go to
Settings->About tablet
and tap on the last entry ("Build number") 6 or 7 times in succession. This will allow the following menu item to appear under settings:
Settings-> {} Developer options
You can enable ADB debugging from there.
The PTP/MTP toggle control is at
Settings -> Storage -> Menu (top RH corner) -> USB Computer connection
good luck
MTP vs PTP
bftb0 said:
On my (rooted) Stock 4.2.1 tablet, MTP mode only seems to show up if ADB Debugging is enabled.
Sort of odd; PTP will work whether or not ADB Debugging is turned on, but MTP only shows up when ADB debugging is also enabled.
If you have not enabled "Developer Options" on the tablet, go to
Settings->About tablet
and tap on the last entry ("Build number") 6 or 7 times in succession. This will allow the following menu item to appear under settings:
Settings-> {} Developer options
You can enable ADB debugging from there.
The PTP/MTP toggle control is at
Settings -> Storage -> Menu (top RH corner) -> USB Computer connection
good luck
Click to expand...
Click to collapse
Thanks, but I guess I was not very clear.
ADB Debugging is turned on but only works in PTP mode.
MTP does not work at all, even though it's checked.
ganovim said:
Thanks, but I guess I was not very clear.
ADB Debugging is turned on but only works in PTP mode.
MTP does not work at all, even though it's checked.
Click to expand...
Click to collapse
Even after reading this and your 1st post, I am still a little uncertain.
I *think* you are saying that you want to get MTP working on the second unit. And I *think* you are also saying that (additionally) ADB only seems to work when you have PTP mode selected.
Reading between the lines - are you testing things with the same computer for both tablets? (Or, another way to put that, if the answer to this previous question is no, do you see any "Unknown Device" messages in the Device Manager when you toggle things around?)
I fooled around with mine not more than 30 minutes ago. Leaving it plugged into the PC the entire time (Win 7 Pro x64), I could toggle USB Debugging on/off and back and forth between PTP/MTP. Although I didn't actually try a live ADB session in both MTP/PTP modes, the file browser thing would pop up for PTP mode no matter what I had ADB debugging set to, and for MTP mode that would only happen if I had ADB debugging enabled. At no time did I see any unrecognized devices in the Device Manager.
And I think that what I just said above doesn't help you.... arghh.
MTP vs PTP
bftb0 said:
Even after reading this and your 1st post, I am still a little uncertain.
I *think* you are saying that you want to get MTP working on the second unit. And I *think* you are also saying that (additionally) ADB only seems to work when you have PTP mode selected.
Reading between the lines - are you testing things with the same computer for both tablets? (Or, another way to put that, if the answer to this previous question is no, do you see any "Unknown Device" messages in the Device Manager when you toggle things around?)
And I think that what I just said above doesn't help you.... arghh.
Click to expand...
Click to collapse
First of all thanks for the interest.
Bottom line is as follows.
MTP mode does not work period.
However....
when I boot into recovery, (TWRP) the pc sees the usb connection, and I can use adb commands.
So it leads me to conclude that there is something off in the System files. But (and it's driving me nuts)
they are a clone of the first (MTP functioning) Nexus 7.
Thanks again
@OP
You can uninstall the drivers(all of the n7 drivers), then unplug, then replug it in, then let it install its drivers again. This solved the mtp issues other users had.
I have my sg4 plugged into my laptop, but it is not showing up in the android debug monitor. I ran it as administrator, and the device does show up in my computer.
Do you have debugging enabled in Developer options? Make sure you have the right drivers installed otherwise you may need a reboot on both devices
I have the Nexus 7 drivers installed, and the adb interface.
and I do have debugging enabled.
I think that you need the Samsung drivers. The Nexus 7 drivers are different ones. So download them here: http://www.samsung.com/us/support/downloads
They should also be installed if you install Kies.
sniper8752 said:
I have my sg4 plugged into my laptop, but it is not showing up in the android debug monitor. I ran it as administrator, and the device does show up in my computer.
Click to expand...
Click to collapse
There is a well-hidden menu that you may need to access.
Assuming you have developer mode enabled...
- Go to Settings, then Storage
- Click on the menu (top right)
- Select USB computer connection
You'll see 2 boxes:
- Tick 'media device'
I found that if neither box was ticked, I couldn't see my device...
Maybe the first time the dialog says "Allow this computer debugging" appears, you clicked NO.
Try go to Developer options and click "Revoke USB debugging authorizations", and reconnect the device.
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
U saved me BRO!!..was tired of using OTH
U saved me BRO!!..was tired of using OTH
Applying all things you said but yureka not connect with computer
USB Computer Connection is still not popping
Hi, I have tried all that is said above, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Problem Solved
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
The problem is not in the phone, or can't be solved by it
Actually you have to do this via pc.
1)search update drivers and find the update device drivers option
2)in other devices find Android and double click
3)click the driver tab
4)click update driver
Worked for me ?????
PC connection Still its not working
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
Hi..
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
can any one please help me ?
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
Sahil Badal said:
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
Click to expand...
Click to collapse
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
Yureka not connect to PC
[[/B][/B]
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
I have followed all above steps, but not shows USB connection.
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Hi, I have tried all that is said a, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help vikas meena 9694746144
Dear Sir,
As per your instruction i go to the setting but as u written
"Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox. "
after tapping computer connection nothing pop up arises. I can not enable Media Device (MTP)
Please guide me.
Suresh
vertexpac said:
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Click to expand...
Click to collapse
did u get any solution bro????..... i cant copy files to pc and root
---------- Post added at 05:33 AM ---------- Previous post was at 05:30 AM ----------
shadowkill97 said:
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Click to expand...
Click to collapse
did u got any solution bro... i cant connect my yureka to pc. i want to root it. But i cant connect it
USB connection problem
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", plz help me
yureka AO 5510
Sir,
My yureka AO 5510 hardbricked and i used emmc image and enter into fastboot mode ( by only pressing power button it can switch on and work) but to flash this is not shown in device manager. I tried with usb driver, adb driver, nothing happend.... and gave to shop and changed its usb port.... but no use....
i can power on it with this memory card or go to fastboot mode.... can not connect to PC.... Please help me....
thank you for your practical guidance, because since so many days and several times I tried to connect with my laptop, last i thought to install some yu drives in my laptop, but this is a very useful points, you are putforth in this moment. once again thank you for the substantial helping tendency you have shown. may proceed it in future to help others,
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Got ot developer tools and enable the android debugging.. reboot the mobile
After reboot a pop up window will be opening and asks for disable the android debugging .. disable it in developer tools and then connect the usb cable again . then the pop up will be coming as usual ...and problem got solved
Yureka not connect to any pc
Pc shows popup that the device is malfunctioned.
In device manager it says device dicriptor request failed.
vrishabhv2 said:
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Click to expand...
Click to collapse
did you find any solution?
I have the Motorola drivers already installed and USB debugging ON. But when I connect the phone to the computer the internal storage does not show on the computer. I have to go back to the Developer Options switch the USB config from MTP to PTP and back to MTP to see the internal storage. Just an annoying extra step.
Is there a permanent fix to this? The phone is rooted.
ROM?
Your settings in Developer Options are not relevant. When you connect it to the PC, pull down the notification shade and find the entry that says USB Charging and tap it, then select MTP mode, it should appear in My Computer after that if it doesn't open automatically.
acejavelin said:
Your settings in Developer Options are not relevant. When you connect it to the PC, pull down the notification shade and find the entry that says USB Charging and tap it, then select MTP mode, it should appear in My Computer after that if it doesn't open automatically.
Click to expand...
Click to collapse
Thanks Ace! You have helped me out several times with accurate answers before. You do live up to your screen name! ::highfive:
Connecting my phone to PC doesn't do anything, I have developer options and checked USB debugging. Anyone can tell me how to install drivers for xiaomi devices, also where to get them for this device
there you go > https://xiaomibuzz.com/usb-drivers/download-xiaomi-usb-drivers.html
next time, use google.