Kind of a niche guide, but at least non-Japanese people owning an SC-01C have some sort of guidelines.
Before we begin
The SC-01C is the rebranded Japanese version of the P1000, locked exclusively to NTT DoCoMo. If you have this model and want to upgrade and/or flash custom ROMs with it, this guide may be able to help you.
Before beginning, you have to check your firmware version. What you'll have to download will depend on it. If you have Android 2.2 Froyo, read on, otherwise, if you're already running Android 2.3 Gingerbread skip to the Gingerbread Users section.
Also, based on experience, if you want to upgrade to other ROMs in the future you will have to keep your stock GB ROM file, your gt-p1000_mr.pit, the dbdata.tar and the entire Overcome kit (kernel and ROM). You will need all of them in the future because I've found that to install a new ROM you have to repeat the entire process of restocking to GB, then installing Overcome Kernel and ROM, then installing whatever ROM you want. It sucks, but it's the only way I've seen so far.
Froyo Users
If you're planning to install a custom ROM, you can't do it on Froyo straight away, at least not on a stock ROM with a protected bootloader. If you don't know if your bootloader is protected or not, the safest thing to do is to first upgrade your firmware to the stock Japanese Android 2.3 Gingerbread. Then you can follow the Gingerbread guide afterwards.
Froyo Users Will Need
Stock Japanese GB ROM (you can get it from here or from SamFirmware.com). The ROM is a .tar archive file, so you will also need 7-Zip or another file extracting utility to extract files from the tar file.
Odin 1.7 (higher versions will likely not hurt either)
Heimdall (in case Odin doesn't work or you aren't running Windows)
Upgrading to Gingerbread
Make sure your PC has the drivers for your Tab. If you've already connected your PC to the Tab before, you already have them. Otherwise, plug your Tab into your PC and let the drivers install automatically. This works even if you're in Download Mode. If they don't install automatically, you might need to download Samsung Kies or just the Samsung USB Driver for Mobile Phones to get the driver to install.
[FOR HEIMDALL USERS]
You will need to plug in your Tab and run zadig.exe for your drivers, which is found either in the same folder as your Heimdall.exe or in the Drivers folder in that same folder, depending on which version you have. From there, select Options -> List All Devices, then select Gadget Serial or Android USB Composite Interface, then click Install Driver.
After getting the drivers, unplug your Tab (you can keep the PC end plugged in). Turn off your Tab and plug your USB Interface cord into your PC (not the Tab just yet), then put your Tab into Download Mode. You can do this by either holding down the Power and Volume Down keys while the Tab is off, or simply holding down the Volume Down key while plugging in the cord to your Tab. If done correctly, you should see a screen with a yellow Android with a shovel, together with the words "DOWNLOAD MODE, DO NOT TURN OFF TARGET!"
If you're running Windows and using Odin, extract the gt-p1000_mr.pit from the .tar archive into the same folder as the archive. Otherwise, if you're running Heimdall, extract the entire archive into the same folder as your Heimdall.exe.
Plug your Tab back in if you haven't already. The next step will vary for Odin and Heimdall users.
[FOR ODIN USERS]
Open Odin and check if there is a yellow box amongst all the white ones which says [COM4] or something like that, it doesn't matter as long as the box is yellow.
Click PIT and select the gt-p1000_mr.pit you extracted from the stock Japanese GB .tar file, then click Start. This will re-partition the device, and it is absolutely critical that this is done first, as missing this step can cause a brick.
After the PIT flashing is successful, click Reset, then click PDA and select the stock Japanese GB .tar file, and click Start. You will have to wait for a few minutes while the ROM flashes. Progress bars will appear both on the Tab screen and Odin.
NOTE: If after flashing you boot into Recovery Mode and you get the following error:
Code:
E: part(1) DATA Checksum Error
E: part(1) Checksum Error
Internal MMC checksum verify failed.
Then you will have to download and flash dbdata.tar as PDA (Google "P1000 dbdata.tar"; it's about 1.25MB or so). That should solve it.
[FOR HEIMDALL USERS]
Since you already extracted the contents of the stock Japanese GB .tar file into the same folder as your Heimdall.exe, all you have to do is run the following command from a Terminal window (or Command Prompt if you're running Windows):
Code:
heimdall flash --repartition --primary-boot boot.bin --cache cache.rfs --dbdata dbdata.rfs --factoryfs factoryfs.rfs --pit gt-p1000_mr.pit --modem modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage --verbose
Wait a few minutes while Heimdall flashes the ROM. It should inform you when the flashing is successful.
After the flashing is successful, you should now be running stock Android 2.3 Gingerbread. You can stop here or continue on to the Gingerbread Users section for flashing a custom ROM.
Gingerbread Users
Since you're already on Gingerbread, which is the latest stock Android version you have, you're probably reading this guide to find out how to install custom ROMs. Personally I've found, after bricking my Tab a couple of times, that trying to flash custom ROMs from the stock Japanese GB ROM doesn't work unless you flash the Overcome kernel and ROM first.
Hence, the first step to getting a custom ROM running on an SC-01C is to flash the Overcome kernel. For instructions on how to do this, go to the guide thread at the end of the paragraph. You can skip the restocking part, as you're already running stock GB. Instead, follow the instructions from Step 7 of the guide, found on Page 10. After following the instructions there and flashing the Overcome kernel and ROM, you should now be able to flash any other custom ROM you want, following the instructions for the regular P1000.
Getting the Overcome kernel and ROM: http://forum.xda-developers.com/showthread.php?t=1881981
Questions, Answers and Possible Issues
My SC-01C is stuck at boot logo after trying (and failing) to flash custom ROM.
Solving this issue depends on your firmware version and whether or not you can still get into Download Mode. If you can, just follow the instructions in this guide exactly and the problem should be solved.
My SC-01C is stuck at phone-exclamation mark!-computer screen.
This is also likely because of a failed ROM flashing or firmware upgrade. In that case, you can use Heimdall OneClickUnbrick to fix it. A guide to do so can be found here.
My SC-01C isn't detected by Odin, and/or Heimdall produces a "Claiming interface failed" error.
Your drivers aren't being detected and either need to be installed or reinstalled. To force a driver reinstall on Windows, plug in your Tab, go to the System Tray, right-click Safely Remove Hardware and Eject Media, then select Open Devices and Printers. Find your Tab's device name from there, then right-click it and select Remove Device, then unplug your Tab and plug it in again. The drivers should reinstall automatically. If they still don't reinstall, download Samsung Kies or the Samsung USB Driver for Mobile Phones and try again.
For other possible questions or concerns, please reply to this thread.
After successful repair, No Network/ No service
I followed the first method and recovered a bricked P1000 docomo
But No network/service
Any ideas ?
dannyogolo said:
I followed the first method and recovered a bricked P1000 docomo
But No network/service
Any ideas ?
Click to expand...
Click to collapse
You'll need to modify it further to get it to work with other providers. I'm personally not sure if it's a hardware or a software hack, because I paid someone to unlock my Tab back when I didn't know jack **** about modding. If it was already unlocked prior to being bricked, try to flash a new ROM over it. Either way, please hit back if you find the answer so I can add it to the FAQ section.
Hi! I just got the SC-01C & it was already loaded with a custom ICS firmware. Would it be ok to flash another custom firmware DIRECTLY? or Do I still need to flash the GB first?
only root
how to root without change stock rom?
It is possible ?
Thank you
zmeus said:
how to root without change stock rom?
It is possible ?
Thank you
Click to expand...
Click to collapse
Yes it's possible, just Google "how to root galaxy tab". There's a few methods, so just pick one.
Sent from my GT-P1000 using xda app-developers app
Thank you
This it will help me for sure.
Sent from my GT-I9100 using Tapatalk 4
"Hi im a noob and i hate myself"
finally found a thread that that covers japanese p1000.
I have a one it was given to me and still on android froyo 2.2 it is been unlocked by software and i don't know if its been rooted or not.
for the past days i've been looking over the net for this particular device to be upgrade to the latest jellybean rom.this will be very helpful for me since i dont know anything about flashing. been reading threads over and over bec i dont want to brick this device for i use it as a secondary phone
Will flashing to the original docomo GB 2.3... stock firmware make the tab in an locked state again? and is the new rom like the cyanogenmod 10.1 or 10.2 have a built in unlock?
joevinz said:
"Hi im a noob and i hate myself"
finally found a thread that that covers japanese p1000.
I have a one it was given to me and still on android froyo 2.2 it is been unlocked by software and i don't know if its been rooted or not.
for the past days i've been looking over the net for this particular device to be upgrade to the latest jellybean rom.this will be very helpful for me since i dont know anything about flashing. been reading threads over and over bec i dont want to brick this device for i use it as a secondary phone
Will flashing to the original docomo GB 2.3... stock firmware make the tab in an locked state again? and is the new rom like the cyanogenmod 10.1 or 10.2 have a built in unlock?
Click to expand...
Click to collapse
No, 2,3 has an unlocked bootloader. Just follow the guide carefully step by step and you should be fine.
geno93n0 said:
No, 2,3 has an unlocked bootloader. Just follow the guide carefully step by step and you should be fine.
Click to expand...
Click to collapse
ok that's good to know, i'll prep up first before having a go. just be patient with me pls. bec from time to time i'll be asking you alot if i mess up. . thank in advance. thank button has been used.:good:
joevinz said:
ok that's good to know, i'll prep up first before having a go. just be patient with me pls. bec from time to time i'll be asking you alot if i mess up. . thank in advance. thank button has been used.:good:
Click to expand...
Click to collapse
No problem, ask away. I made a lot of mistakes by experimenting on my own, so I made this guide to make the process easier for people with our model.
Hi i have a problem with SC-01C Gingerbread OMKE2, ive been stuck in boot.bin and it fails to flash the overcome using ODIN, what should i do? pls help
Help I think I am bricked
I have a sc-01c bought in japan...I tried flashing and now all i get is the docomo screen...I think i may have deleted everything on the tab...I can get into dl mode but whether flashing with odin or heimdall i get errors...Is there a way to wipe totally and reinstall from scratch....
WILLIEFRANCE said:
I have a sc-01c bought in japan...I tried flashing and now all i get is the docomo screen...I think i may have deleted everything on the tab...I can get into dl mode but whether flashing with odin or heimdall i get errors...Is there a way to wipe totally and reinstall from scratch....
Click to expand...
Click to collapse
What are you Trying to do? and what errors?
SC-01C
rence.slvdr said:
What are you Trying to do? and what errors?
Click to expand...
Click to collapse
I am trying to install the stock rom using odin. I flash the pit then reboot go back to dl mode and flash the tar(stock) i think i hosed the device...Odin says it passed and it reset...but all i get is docommo screen then after the samsung galaxy screen and it keeps blinking ever few minutes like it cant reboot...I ALSO tried flashing the newer Stock 2.3? and the same issue...
I think I may have mucked up the software but can get into DL mode...any ideas?
I followed the directions but still no joy....Perhaps I am dense...
But basically
Flash pit
reboot
Flash stock
Blinking samsung
Odin says reset and no errors...
WILLIEFRANCE said:
I am trying to install the stock rom using odin. I flash the pit then reboot go back to dl mode and flash the tar(stock) i think i hosed the device...Odin says it passed and it reset...but all i get is docommo screen then after the samsung galaxy screen and it keeps blinking ever few minutes like it cant reboot...I ALSO tried flashing the newer Stock 2.3? and the same issue...
I think I may have mucked up the software but can get into DL mode...any ideas?
I followed the directions but still no joy....Perhaps I am dense...
But basically
Flash pit
reboot
Flash stock
Blinking samsung
Odin says reset and no errors...
Click to expand...
Click to collapse
This happened to me as well, it's why I wrote this guide. Try the Overcome method that I posted in the guide, or search for it in this forum. Also, are you using the stock Japanese GB ROM or just a normal stock ROM? You need to use the stock Japanese Gingerbread ROM. I provided links in the guide.
rence.slvdr said:
Hi i have a problem with SC-01C Gingerbread OMKE2, ive been stuck in boot.bin and it fails to flash the overcome using ODIN, what should i do? pls help
Click to expand...
Click to collapse
Don't flash them all at once. Look at the Overcome guide carefully.
pls help
hi.. im new here and i have a problem with modding my sc01c tab. im already running on official gingerbread SC01COMKE2 firmware and im also rooted. i followed all the steps but always ended up with a soft brick. heres what i did.. i downloaded overcome files from http://forum.xda-developers.com/showthread.php?t=1881981 and followed step by step guide. i flashed Overcome_Kernel_v4.0.0.tar and boot into recovery mode.. then flashed Overcome_7_Series_v4.1.0_Wipe.. but it says cannot open BAD FILE. i redownload even the no wipe version but same happens. i tried to restock using GB-Stock-Safe-v5 but it failed in odin.. whats weird is that when i flashed my tab with official firmware it succeeded without a problem.. can you guys help me here? what did i miss or do wrong? pls dont hate me much im just a noob.
geno93n0 said:
No problem, ask away. I made a lot of mistakes by experimenting on my own, so I made this guide to make the process easier for people with our model.
Click to expand...
Click to collapse
ah finally had the time to modd my docomo tab, heres what happened, fashing the pit file went ok, but flashing the rom went haywire ended up brick. i did everything to the letter but to no success. i manage to unbrick the tab and redo the whole thing but i always end up bricking it. rom fails to flash. any ideas? should i be rooted in froyo before doing this?
ah finally after countless trial and error finally updated my tab to gingerbread, now next step is to root and install clockwork recovery mod. i will not rst until my tab gets the lates jellybean rom hahahah,
Hey!!
thanks in advance for reading my post, I really hope you can help me in some way.
(Sorry for my english)
Well, I rooted my S4 and everything went well. I managed to get the newest Philz Touch + SuperSU on my phone.
Afterwards I wanted to install the new Google Play ROM (4.4.3) from Danvdh. I cleaned up with Philz doing a ''fullwipe'' + ''clean to install a new rom''. Then a problem came up saying: Error 7 or something... Installation Aborted!
Since I did ''clean to install a new rom'' now even my stock rom is gone and I'm pretty much sitting here with an empty phone right? But i cant install another ROM that might install successful, because my phone gets always stuck in the ''Galaxy S4 Bootscreen''. All I can do is getting out the battery to turn it off.
But I can still get into Philz Recovery where I could install a new Rom that might work, but I cant put another ROM .zip to my SD-Card because my computer wont detect my phone since its not getting started and is stuck in the loading screen. Else I would simply put another ROM onto my SD-Card at my PC but my phone doesnt get detected at that point...
Now I tried to install the Stock ROM via Odin (thats what google said might help). But when i tried to flash the md5 ROM Odin just said: FAIL
Im pretty much done with my ideas.. I am really hoping somebody can help me in any way.
Thanks for reading and thanks for any support!
Greets!!!
Re download stock firmware and try again with Odin
Make sure kies isn't running
Try different USB port/cable
Sent from my GT-I9505 using XDA Premium HD app
Feisar90 said:
Hey!!
thanks in advance for reading my post, I really hope you can help me in some way.
(Sorry for my english)
Well, I rooted my S4 and everything went well. I managed to get the newest Philz Touch + SuperSU on my phone.
Afterwards I wanted to install the new Google Play ROM (4.4.3) from Danvdh. I cleaned up with Philz doing a ''fullwipe'' + ''clean to install a new rom''. Then a problem came up saying: Error 7 or something... Installation Aborted!
Since I did ''clean to install a new rom'' now even my stock rom is gone and I'm pretty much sitting here with an empty phone right? But i cant install another ROM that might install successful, because my phone gets always stuck in the ''Galaxy S4 Bootscreen''. All I can do is getting out the battery to turn it off.
But I can still get into Philz Recovery where I could install a new Rom that might work, but I cant put another ROM .zip to my SD-Card because my computer wont detect my phone since its not getting started and is stuck in the loading screen. Else I would simply put another ROM onto my SD-Card at my PC but my phone doesnt get detected at that point...
Now I tried to install the Stock ROM via Odin (thats what google said might help). But when i tried to flash the md5 ROM Odin just said: FAIL
Im pretty much done with my ideas.. I am really hoping somebody can help me in any way.
Thanks for reading and thanks for any support!
Greets!!!
Click to expand...
Click to collapse
Good Morning.
make sure youre phone is in download mode when using odin Volume Down + Home Button + Power Button from phone swithed Off
if u still want the 4.4.3 rom redownload it and make sure!!!!!! you have the correct rom for your phone model.
As a solution for your SD not being read by pc. Just remove it and use a Micro SD adaptor a plug it directly to the PC
Or just simply use sideload ... if u search around a bit youll find a guide for Sideload wich is pretty easy IMHO
Enviado do meu GT-I9505 através de Tapatalk
Error 7 is when you want to flash a rom that is not for your device. So make sure you pick the right rom and that you have the correct recovery for your phone.
I have LG G2 D802 32GB. When I bought it, there was Android 4.4.2 KitKat installed.
Then I rooted it using ioroot25 and installed custom recovery using AutoRec.
I flashed CloudyG3 v1.2 rom by @Cloudyfa using TWRP.
It was working really good except the VOIP calls, thus I wanted to revert back to stock.
I found this guide: http://forum.xda-developers.com/showthread.php?t=2432476
I tried to flash it using some Europe Open KDZ from this page: http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F
The flashing started and stucked at I think 4%. I rebooted the phone and it appeared as qhsusb_dload.
I can't remember if I clicked on Normal or CFE flash. But I think it was normal.
I tried to unbrick it with this guide: http://forum.xda-developers.com/showthread.php?t=2582142
After that I got only LG logo and no recovery, no fastboot, no download mode, no qhsusb_dload mode, no nothing.
Now I got board replacement. The board have rooted Android 4.2.2 Jelly Bean installed.
As I want to have CloudyG3 installed. I tried to do that by installing custom recovery and then flashing the CloudyG3 rom and KitKat baseband. But I think I have a battery drain issue, as Cludyfa already said. I also tried with flashing the Cust and Persist partitions from the KitKat KDZ, but my battery didn't got any better.
The question is, why I bricked my phone with LG flash tool? What should I do to make sure that this won't happen again?
I made backup of entire phone nand (mmcblk0). Should I DD it if I get the bulk mode (qhsusb_dload) again?
Thank you in advance for your answers.
@mss1988 if the phone is stuck at 4% just let it still for some time cause the program could might be bugged or some other error, just leave the phone on dont restart it cause the phone has first removed the stuff and didnt copied the bootloader etc yet.
If you get qhsusb_dload mode then I suggest to use the unbrick guide and also Pick the right files for your phone. You can DD your backup to your phone but using the unbrick guide seems safer to me.
Also check when you can use that qhsusb dload that all files are copied good.
Tip to prevent brick after root and custom recovery: Flash an stock rom through recovery or an stock rom which got modified under the hood.
wulsic said:
@mss1988 if the phone is stuck at 4% just let it still for some time cause the program could might be bugged or some other error, just leave the phone on dont restart it cause the phone has first removed the stuff and didnt copied the bootloader etc yet.
If you get qhsusb_dload mode then I suggest to use the unbrick guide and also Pick the right files for your phone. You can DD your backup to your phone but using the unbrick guide seems safer to me.
Also check when you can use that qhsusb dload that all files are copied good.
Tip to prevent brick after root and custom recovery: Flash an stock rom through recovery or an stock rom which got modified under the hood.
Click to expand...
Click to collapse
When phone stucked there was also some message box on LG Flash Tool. Something like that: ?????? ??? ????????.
Sent from my LG-D802 using XDA Free mobile app
Broken usb cable or port? Problems on pc?
siggey said:
Broken usb cable or port? Problems on pc?
Click to expand...
Click to collapse
As far as I know none of that.
Sent from my LG-D802 using XDA Free mobile app
That something like ????? Was probably in some asian language which your pc couldnt read. Some pc's makes boxes from it some ?. I cant tell you what that ???? Means since they have no meaning without any real symbols from some language of asia (I dont know where the dev comes from)
If it was stuck at 4% you could ask it on the thread of the lg flashtool since the dev of it and or other users may know the problem.
mss1988 said:
What should I do to make sure that this won't happen again?
Click to expand...
Click to collapse
Read the tutorial in detail & HAVE some patience man.
Please please please guys !! I really need your help with my tablet lenovo a3000 !!
my tablet stuck at the logo screen !! I can access the recovery menu I tried factory reset and wipe data 5 times and it didn't help at all !!
my 2 pcs can't recognize my tablet '' the MTK thing won't appear in device manager " already downloaded the drivers on my both pscs with no luck the tablet only charges !!
I notice in the recovery menu I can install zip file there !! so I figured out the only way to install the stock rom is to flash it via recovery menu since my pcs won't recognize the tablet !! I just need the stock rom in a zip file flashable via recovery menu !! anyone can provide me the file it would be really really appreciated please guys it's really urgent !!
It seems that we all have the same problem with this A3000 H device but is seems that people in this forum don't want to help each other. Why is that? We just all need a proper .zip file with a backup that is flashable or restorable from Sd card and job done but where to find such files? I tried to find in some russian forums but they're also not flashable, I almost tried every file that is suitable for flashing through the recovery these files are not just simple .img but must be made as an official Ota updates by its structure with all the meta files and etc. And I bet If we find the proper files we could be able to restore our devices but I started to think that there many people that just do not want old devices to be restored! ): I personaly have such an ota update file but it's only 6mb and when flashing it the process stopped at the half ot it and I know why because we are already rooted and these files are only for the original rom. Mine is 14027 and probably pc stops recognizing the tablet from USB when we all flash it with that rom. So if you have a custom rom installed you have already made my mistake too, but I'll do everything to restore it somehow because the device should work properly and it is working properly I just have to manage to get through this boot loop stuff, I' m sure mine is still working but I' m affraid I did not make a backup so now I'm stuck as well! The only option for us is to flash it through the recovery but with the files I have stored at once there' s an error with the Contacts.app at the half way of flashing. Do I need to delete that app and try again? I can upload the file I have somewhere but it was an update from the OTA and didn't remember which rom was it for . It must have been... 1309 or 11, but not exactly sure and it's only 6 mbs but we could probably use it for something. I think the only option for us is becoming developers. :laugh: Why don't you give us any backups from your personal roms so we could restore our devices?
Does this tablet stopped working for us all, I hope not so we could start helping each other again?
I am a smart guy and know exactly the reason why our old devices stopped working because of the google play apps and updates that are not suitable for us anymore like messenger, facebook lite and etc. It' s not our fault guys! :laugh:
I'm not gonna buy a new tab because someone is telling me to do that I will try restore mine own Lenovo A 3000 H somehow with a little help of course!
Greetings,
Yesterday I was about to change my current rom as my phone was running on a custom rom that I found here on the forum with a CWM recovery.
So I went into recovery mode to make a nandroid backup for my device just incase of something bad happens.
When I started the backing up process it took a min or 2 to start and transferring the data and afterwards the device turned off and it went to a black screen with the android logo and it says downloading don't turn off target..
the thing is it still on that screen since yesterday and I can do anything about it because it took longer than the usual as the youtube videos showed me.
I tried turning off the device and turning it back on and still no luck.
I went to download mode to bascially flash a TWRP recovery or a root using odin to later on flash the rom that I wanted but I had no luck as every single time I try to flash something in odin it says "There is no PIT partition"
I looked up online and I found few PIT files and I tried again and its the same thing but it says re partition operation failed something like that.
after doing some research I found even If I flashed the stock firmware it won't change anything as the device won't accept it because of the PIT thing.
I really need your help guys, what can I do now ?
Try using different USB cables and USB 2.0 ports to flash a stock ROM with Odin.
audit13 said:
Try using different USB cables and USB 2.0 ports to flash a stock ROM with Odin.
Click to expand...
Click to collapse
I did and I still have the same issue..
I even tried a different computer and nothing really works, keep in mind that I have downloaded the official stock rom and tried to flash that too and I still have no luck.
I really need help guys :/
Find the correct PIT file and flash that or take for service repair .
Alright I'm writing this reply to whoever searches online for a similar problem.
I fixed my phone long time ago and the problem was ... "the phone USB port"
it turns out my port isn't really good as it had issues in the past and it was changed but I didn't know that until recently and I completely forgot about it.
I didn't fix my port though but how did I fix the phone ?
well it turns out even if your port was bad (depends on the ports condition of course) getting an original cable can help you flash something isn't big such as a root or a recovery mode.
in my case I used an original cable a normal micro USB but after using an original USB 3.0 cable I was able to flash a root and a custom recovery, yes I tried flashing a stock firmware but it I didn't work because of how my port is acting I was kinda limited to the things I can flash so I was able to flash small files but not an entire operating system.
So I flashed a root and a TWRP custom recovery in order to be able to flash an entire OS through the phone itself without the need of plugging it to my computer so I uploaded my custom ROM on an SD Card and flashed it through the recovery mode and I was back in business!
I can safely say the case is solved, I don't know if you guys close the solved topics here or something but thanks for everyone's help.
SEE YA LATER
But port is not PIT problem .