SM-G900T stuck in bootloader loop even after stock firmware flash - Galaxy S 5 Q&A, Help & Troubleshooting

I've got a SM-G900T stuck in a bootloader loop.
I've grabbed the stock firmware, the stock bootloader, the stock modem, and the stock pit file. Flashing them over with Odin gives me the PASS signal, but the phone remains in a bootloop. What I mean by this is that I can't even get to android or recovery mode, the phone only lets me get into download mode. If I try to go to recovery mode, the "booting recovery..." words show up, but then just restarts the phone.
Any way to help me out here?
Using G900T-UVU1CNK2 firmware to flash

Related

Phone Stuck in a bootloop after flashing Carbon.

Hello,
When i tried to flash the rom carbon all the phone does is sit on the carbon screen will not boot after that.
I just rooted my phone and i have a backup of the phone before i rooted it. But i can not get the phone to boot into the recovery mode. At the top of the screen it says booting recovery but never boots into the recovery mode. I have the Galxay S4 SPH-L720. I have tried to load a stock firmware via odin but its keeps failing.
Any help would be greatly apprieced. like i said i do have a full backup of my phone i just need to get it to boot into the recovery so i can restore it

Phone freezes during boot even after stock Rom flash

It's an AT&T S5. I messed with the build.prop to try to spoof another phone, and wound up having the Android UI appear tiny and crash whenever I booted to the home screen. I tried to fix this problem by flashing earlier stock firmware with Odin, but now my phone freezes every time it boots up. It will load until the Samsung logo animation, then freeze mid-animation, and the screen will go black with my led light in the corner blue. I have to pull the battery out.
Every soft brick solution I see is to flash stock firmware, but it doesn't seem to be working. I flash G900AUGU1ANCE 4.4.2, the AP, CP and CSC files, but the phone still boots up with the the CUSTOM appearing at initial boot with the unlocked padlock graphic. Usually that goes away after flashing older firmware. SO despite flashing older firmware, it still boots and freezes. I can boot into Recovery mode and Download mode, so the phone is not all the way gone. I try wiping data and cache in Recovery, but that doesn't fix anything. I am at my wit's end. Can anyone help fix this?
QUOTE=RageKage14;59207198]It's an AT&T S5. I messed with the build.prop to try to spoof another phone, and wound up having the Android UI appear tiny and crash whenever I booted to the home screen. I tried to fix this problem by flashing earlier stock firmware with Odin, but now my phone freezes every time it boots up. It will load until the Samsung logo animation, then freeze mid-animation, and the screen will go black with my led light in the corner blue. I have to pull the battery out.
Every soft brick solution I see is to flash stock firmware, but it doesn't seem to be working. I flash G900AUGU1ANCE 4.4.2, the AP, CP and CSC files, but the phone still boots up with the the CUSTOM appearing at initial boot with the unlocked padlock graphic. Usually that goes away after flashing older firmware. SO despite flashing older firmware, it still boots and freezes. I can boot into Recovery mode and Download mode, so the phone is not all the way gone. I try wiping data and cache in Recovery, but that doesn't fix anything. I am at my wit's end. Can anyone help fix this?[/QUOTE]
I'm having the same problem after installing and using the TWRP app on my ATT S5. I tried reflashing the stock rom using odin and it says successful but the phone never boots. It only makes it to the Samsung logo then the screen goes black. I've heard that if the phone is on lollipop which mine is you have to downgrade to kitkat first then flash the stock files.
If your fone boot in recovery perform a full vipe and format system and after go in download mode end use odin for flash all file bootloader, modem ,PIT file for partition find the pit file for ur device modell in xda

Cannot access recovery also flash stock rom via odin

Hi everybody. First of all sorry for my bad english. I just got a new i9500 galaxy S4 and I would like to flash a cyanogenmod rom. So i flashed twrp recovery via odin v3.09 with the "PASS" success message. But when when i tried to boot the phone in recovery mode it gets stuck on black screen samsung start up logo with the message "recovery booting..." in the top left corner of the screen. I've decided to flash a stock rom thinking it will solve it. But when i tried to flash with odin i got a fail message in odin and a "unsupport dev_type" red message on the phone screen. Now I cannot access the recovery but normal boot and download mode work with no problem. And I also cannot flash a stock rom via odin.
Help me. I really need to flash custom rom

Stuck on ATT logo screen after flash, where do i find stock firmware???

Hey I kinda screwed up my phone when flashing it and now its stuck on the ATT logo screen, Can anyone help me? the only thing i can do is put it into download mode and thats about it, I've tried putting it in recovery but no luck.
Fear not, all is not lost, it's just a boot loop.
You can download the original firmware from Sammobile
Then put your phone into download mode and flash it onto your phone using a PC and Odin software.
Hope this helps.

Odin won't flash anything! Is my phone bricked?

KNOX is tripped. I have no OS currently. It won't go anywhere except download mode. It won't even shut down. I managed to flash TWRP Recovery but it comes in a very weird way. First download mode turns on, saying: "WARNING: CMDLINE parameter modified" and then TWRP comes on, with a strange S7 edge logo behind it. I don't know what to do. Odin always fails at sboot.bin and if I untick BL, it gets stuck at system.img. I have flashed tens of stock roms but to no avail. Can somebody please help?

Categories

Resources