hello. i have ale-21 and after i tried install a failed update, i am in this situation:
1. can't root because after flashed recovery for root i can't access in recovery (black screen)
2. even if i flash twrp it can't be able to wipe for error mount.......
i tried reflash vendor 049 and return to b133 firmware but same situation.
is there a way to do a complete re-format phone and repartitioning all (internal memory and all partitions) to return to stock status?
i hope a help
thanks
Related
Hello! I have installed the CM10 from pershoot whit recovery,modem and bootloader .tar from droidbasement.com. Recovery is able to wipe cache but when i want to wipe data it force restart in recovery and nothing have been erased. Do i can wipe all whit Odin or something else?? :cyclops:
If i format every folder From the recovery on my tablet do i will able to flash original rom whit odin to return to stock or it will break something?
I had these experience as u described.
You likely have to flash any ICS stock rom from Odin and then root your device in order to get this resolve.
I am having a problem installing a custom ROM... I root the device using CF-Autoroot and Philz Recovery. TIBU confirms the phone is rooted.
I boot into recovery, then try to install a ROM which is on the ext-SD card. I do a full wipe using Philz Recovery.
When I try to restart the phone, I get a bootloop, NO MATTER WHICH ROM I am trying to install. Then I have to go through the hassle of downloading the original firmware using KIES
and start all over again.
Any help or thoughts will be greatly appreciated.
Wipe before flashing
You must do the full wipe before flashing a new ROM, not after (Because if you are wiping /system after flash, you are leaving your device without OS)
And remember, flash gapps after first boot, not after flashing The rom
P.S you can do a full Nandroid Baclup before flashing a new ROM, because if you get stuck in bootloop again, you can simply enter to recovery and restore backup
Thanks for your input, but that's exactly what I did.. except for the backup part.
Hello everyone,
I tried to install SuperSU on my Axon7 (by flashing SuperSU-v2.65-20151226141550 in TWRP) and after that, my phone doesn't boot anymore.... I still have access to TWRP (3.0.2-2) but I can't access to the system. I tried to restore a backup I made with TWRP and wipe cache, DALVIK and data but it didn't work.
When I try to boot, I'm blocked on the screen "ZTE powered by Android".
How can I restore my stock ROM with TWRP?
PS: I was in stock rom and my model is the B06.
Thanks in advance!!
Is your bootloader unlocked? In such case, my advice is to flash the ZADmix7 ROM to your 2017G from TWRP.
Otherwise you can go back to stock using this guide. If you can access recovery or bootloader, then your brick is a very, very soft brick.
st3ph31 said:
Hello everyone,
I tried to install SuperSU on my Axon7 (by flashing SuperSU-v2.65-20151226141550 in TWRP) and after that, my phone doesn't boot anymore.... I still have access to TWRP (3.0.2-2) but I can't access to the system. I tried to restore a backup I made with TWRP and wipe cache, DALVIK and data but it didn't work.
When I try to boot, I'm blocked on the screen "ZTE powered by Android".
How can I restore my stock ROM with TWRP?
PS: I was in stock rom and my model is the B06.
Thanks in advance!!
Click to expand...
Click to collapse
If your BL is still unlocked and you did flash SU2.65 before you should have unlocked it, than you might follow this thread too to unlock your BL first and then flash SU2.65 again
https://forum.xda-developers.com/showpost.php?p=70562463&postcount=154
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
Perhaps this might help
Thanks to you two for your help, I followed this tuto: https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 and everything is fine now
I thought that TWRP was enough to install SuperSU... Next time, I will read more carefully the tutos
I just rooted my P9 lite, installed TWRP from the SRK Guide in here and then saw that Snapchat checks for root.
So now i would like to unroot (doesnt work in SuperSU), install Snapchat, Root und save with TitaniumBackup.
How does the process of returning to stock work? Where do i get my .zip?
I understand that i need to download my full ROM [Firmware Finder APP] but how do i procees further? Do i need to have stock recovery for dload method?
The unroot option in SuperSU does not work? :/
Download the stock firmware from here: https://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
Extract the dload folder which has the UPDATE.APP inside, put the dload folder in your microSD card, power off the phone, hold power button + volume up + volume down and wait until the installation will start.
This will relock your bootloader and restore the phone to stock firmware.
Does it matter that i have a ****ty twrp installed which doesnt even recognize data partition?
And can i unlock bootloader and root the samw way as before?
Thanks in advance
Wims
You can unlock and root as you already did. Which TWRP are you using?
Potato997 said:
You can unlock and root as you already did. Which TWRP are you using?
Click to expand...
Click to collapse
I had a ****ty one from the Guide with the srktoolkit. Now i updated to TWRP v4 by METICULUS. It works and i can finally see /data/media again.
Does the Phone Off then 3 Button trick go through the Recovery or through what exactly?
I would now do the thing above, then unlock my Bootloader again (i still have the key so it should be easy), install the TWRP by METICULUS, install my apps i need to install without root (Snapchat) , then reboot to twrp and flash newest supersu from chainfire. Finished. Am i right?
Btw i have to say that i was pretty much a flashaholic with tht Galaxy S3, Moto G and OnePlus 2 and it was never this tricky i think :'D
Well TRWP still doesnt get /data. I didn't encrypt anything but Twrp keeps telling me that it cant find it. And when i (select storage) (internal storage) it goes to /emmc...
At first the log says:
Failed to mount '/data' (mounted without encryption)
And the Screenshots were saved to /data/media/Pictures/Scrennshots insted of somwhere in the internal storage...
I fear of having my partitions mixed up somehow because when stock recovery couldn finish wiping cache and data too...
Probably TWRP can't mount encrypted Huawei data partition, the only thing it can probably do is to format it so basically a hard reset
Potato997 said:
Probably TWRP can't mount encrypted Huawei data partition, the only thing it can probably do is to format it so basically a hard reset
Click to expand...
Click to collapse
So -> TWRP -> Format /data?
EDIT: I tried format data -> yes -> and even there it said can't find /data partition.
Any ideas what i can do?? Everything works but i can't do anything in all the TWRPs...
Hi,
I have a rooted OP5 with 4.5.13.
I tried to install the flashable zip (from here) via TWRP without wipe, but ended up in a bootloop.
I've restored to the nandroid backup, wiped data, and tried again. This time the OP5 managed to boot only to recovery.
I've verified the md5 of the file I've used.
Do you know why this is happening? Do you know how I can upgrade to 4.5.14?
Thanks.
Did you download the full ROM or just the update?
I tried both. I didn't succeeded to install the update (as it is not intended for rooted devices).
The full rom is what caused the bootloop.
If you are doing a dirty flash you wipe cache and system. If you are doing a clean flash you wipe cache, system and data. It doesn't sound like you wiped the correct partitions when doing your flash. You also need to flash Magisk or SU after the ROM flash and before booting up or you will lose TWRP and root. If your phone is decrypted for some reason you also need to flash a no verify zip or your phone will boot loop because OOS is made for encrypted phones.