[Official Lollipop 5.1.1] FAST LINKS FOR OFFICIAL FIRMWARE 5.1.1 SM-P605 - Galaxy Note 10.1 (2014 Edition) General

Note 10.1 2014 recently got official updated to 5.1.1 in Finland, this is for the PM-605 Variant (LTE) . The links are available below and Megashare Link is Fast and Recommended. This is working outside Finland tried on my Note and working without problem including Modem/Network. This is official firmware so won't trip KNOX Flash using ODIN, instructions below.
DO NOT FLASH ON OTHER VARIANTS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Links:
Mediafire (FAST) : http://www.mediafire.com/download/4a0ecqat2xj4440/NEE-P605XXU1EOI5-20151002110654.zip
Megashare (FAST) : https://mega.nz/#!I0klVAiL!f7rA0WBTN9K-mJ_rPiLOuYFp3c46v9XpGXNkQ4PeIsU
Megashare (FAST) MIRROR 2: https://mega.nz/#F!tsBS1DAS!4VS_SsXi8ZVGL9fmCk_cyg
AlfaFile (SLOW): https://alfafile.net/file/d4D
RapidGator (SLOW): http://rapidgator.net/file/3c04c316ddfc853beb71d37d0707c0f4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
How to install?
1) Get Odin latest version
2) Download the Firmware From Links Above
3) Make sure Samsung USB drivers are installed
4) Go into download mode by holding down Power and Volume Down key (Sometimes Home key might have to be pressed too)
5) Press Volume Up
6) Connect Tablet to Computer if not showing up check USB drivers and open Odin again
7) Extract and place the tar.md5 file into AP
8) Wait until it says PASS in green and your done.
If you need any help please comment below.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

HI GUYS,
Can I flash this on my vodafone branded Note without loosing warranty?

Can i flash it on SM-P601?

You could flash it, but you'll most likely loose Warranty. Does it come up with Vodafone, when your turning on the device? Did you buy the note 10.1 2014 from Vodafone?

You could flash it, but you'll most likely loose Warranty. Does it come up with Vodafone, when your turning on the device? Did you buy the note 10.1 2014 from Vodafone?

15576118519 said:
Can i flash it on SM-P601?
Click to expand...
Click to collapse
Nooo it would brick or would make some functions not work like Modem. Sorry

ducklas1 said:
HI GUYS,
Can I flash this on my vodafone branded Note without loosing warranty?
Click to expand...
Click to collapse
You could flash it, but you'll most likely loose Warranty. Does it come up with Vodafone, when your turning on the device? Did you buy the note 10.1 2014 from Vodafone?

zonda2323 said:
Nooo it would brick or would make some functions not work like Modem. Sorry
Click to expand...
Click to collapse
I see. thank you.

15576118519 said:
I see. thank you.
Click to expand...
Click to collapse
I'll update you if any firmware does get released...

link for sm-p601
Do you have a fast link for sm-p601 firmware?

kwj suraweera said:
Do you have a fast link for sm-p601 firmware?
Click to expand...
Click to collapse
I'll get this up as soon as possible.

Hello
I am from Macedonia, I use a Samsung Galaxy Note 10.1 (2014 Edition) SM-P605 LTE Android 4.4.2, baseband P605KKUCNE2, trying to Software update, because I see the Samsung side there is an update for the SM-P605LTE to Lolipop 5.1 when I try to update over the tablets get message "your device has been modified. Software updates are not avaliable." Is it possible to have a software problem or need to make an update on some other way

Hi I am from Winnipeg, Canada using Bell. My p605 was bought from the Philippines.
Is the megashare mirror 2 the same as the mediafire one? Not sure if it is just a fluke but the files seem to be of the exact same sizes. I tried first the megashare mirror 2 download file then my p605 can only have 3g- cannot text nor do 4g. When I reflashed it with the mediafire one- text and 4g works!

Related

STOCK ROM Mexcio (TELCEL) 2.3.6 (includes all factory files)

Hi there guys mm im come from a Spain Forum and i don't post to much in this one but i read you a lot. so i'm not able to post links so im just gona post them with out "www" ok so This is the stock 2.3.6 Telcel rom for the galaxy note you can use it to apply for warranty or sell it. We just get it a few weeks a go and its not on samsungmobile.com
Direct Links i just upload them:
Link Dropbox
Link Bayfiles
And if you Want it From Check Fus 2.0:
theres the page for dowmload check fus 2.0 --> http://fus.nanzen.se/
Just download, open it go to advance and introduce de next information:
Mexico (Telcel)
Added: 2012-05-02 08:46:45
Model: GT-N7000
Product Code: GT-N7000ZBLTCE
Modified: 2011-12-27
HIDSWVER: N7000UBKK8/N7000TCEKK2/N7000UBKK3/N7000UBKK8
Filename: GT-N7000_TCE_1_20111227164154.zip.enc2
CRC: 1385067043
Then go Check and download just, unzip and flashe it with mobile odin or pc odin
So there you go (if you cant thanks down here and let me post links i will appreciate a lot)
Edited 05/05/2012 : I just put it as a links
Sammobile 08/05/2012:
Sammobile Telcel 2.3.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did you flash this?? i mean do you test it?? its safe to flash with Odin PC or Mobile odin???
darkoctavius said:
did you flash this?? i mean do you test it?? its safe to flash with Odin PC or Mobile odin???
Click to expand...
Click to collapse
Yes i did, its all good but Telcel rom its full of "ideas telcel" icons and lot off factory trash so i just flash and other one but it's good to have it for warranty staff. you can see in are Htcmania pag if you talk spanish: http://www.htcmania.com/showthread.php?t=308998
We take it from a safe place from Check Fus.
I will be going to Mexico soon, so I could use my phone there with telcel I need to flash this or it will work with rocket rom just fine?
Although great news for Mexicans, this rom is old. It is from november last year. You're better off by flashing a LB or LC rom.
Definitely good news. Thanks for the update and plus these guys from Check fus are completely awesome having it and distributing.
Cheers!
thanks
thnx gracias
ramirez3805 said:
I will be going to Mexico soon, so I could use my phone there with telcel I need to flash this or it will work with rocket rom just fine?
Click to expand...
Click to collapse
NO actually you can use it normally with your phone number with roaming, but if you wanna use a mexican sim just need a unlock phone if you don't have it unlock try this:
Galaxy_s Ulock (root only)
IS strange but this is the newest version in Mexico in tecel that update was realse in february or march don't remember well and the md5 get realese 1 week after this post. Thats why i don't use mexican firmawares

[Q] Wanted: Official three uk ROM

Hi,
I have been installing various ROM's on my S3 but now want return everything back to how it was. I have used triangle away and odin to restore the firmware I had from a while back however it does not have any of the Three UK branding or apps.
Does anyone have the files I need to restore the S3 with UK three branding and that will software update officially.
Galaxy S III Q&A, Help & Troubleshooting
For all of your questions relating to the Samsung Galaxy S III
Go to sammobile.com.
jje
JJEgan said:
Galaxy S III Q&A, Help & Troubleshooting
For all of your questions relating to the Samsung Galaxy S III
Go to sammobile.com.
jje
Click to expand...
Click to collapse
Thanks I was looking at sammobile but wasn't sure if it was branded etc will give it a try
Here you go mate http://db.tt/pIj37iK5
vipermo said:
Here you go mate http://db.tt/pIj37iK5
Click to expand...
Click to collapse
Thanks, just trying the file from Sammobile, if that does not work I will try your file, will let you know
harveyd said:
Thanks, just trying the file from Sammobile, if that does not work I will try your file, will let you know
Click to expand...
Click to collapse
Think my one is a old 3 stock ROM before jellybean just found stock 3 jellybean on other drive let me know I'll put it in dropbox
Just used the file from Sam's mobile. I used 4.0.4 because I wanted to test software update. Now have the three branding and three app but it says no software update is available. Is this correct? Should I be able to update?
boyomarga said:
I wanted to test software update. Now have the three branding and three app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Sorry....... am I missing something from your message?
Also when connecting to Kies it say's:-
Your device's current firmware version is not supported to update firmware via kies.
Current firmware version: PDA:LH3 / PHONE:LH1 / SCS:LH2 (KOR)
@vipermo will your file be different?
Yes my one should update I don't use kies tho I always flash with Odin
vipermo said:
Yes my one should update I don't use kies tho I always flash with Odin
Click to expand...
Click to collapse
Yours worked perfectly. Both Kies and Built in software updates. Thanks to you!
harveyd said:
Yours worked perfectly. Both Kies and Built in software updates. Thanks to you!
Click to expand...
Click to collapse
Good glad u got it sorted mate
did it update u to jellbean on kies or over the air ?
vipermo said:
Good glad u got it sorted mate
did it update u to jellbean on kies or over the air ?
Click to expand...
Click to collapse
It did indeed, now 4.1.2. Wishing it was 4.2.1
yeh would be nice lol hope sumsung pulled there finger out for us
vipermo said:
yeh would be nice lol hope sumsung pulled there finger out for us
Click to expand...
Click to collapse
Certainly not holding my breath

What rom to use to go back to stock?

I'm from Belgium me and my friend bought the s4 i9505(first edition) last year.
I experimented with lots of roms but whenever i try to go back to an official rom, my friend still gets updates whenever he checks for it and i never do.
So i was wondering if someone could point me to the actual rom i need.
Here's a screenshot of my friends still original rom info.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Thanks in advance.
Pixelhouse said:
I'm from Belgium me and my friend bought the s4 i9505(first edition) last year.
I experimented with lots of roms but whenever i try to go back to an official rom, my friend still gets updates whenever he checks for it and i never do.
So i was wondering if someone could point me to the actual rom i need.
Here's a screenshot of my friends still original rom info.
.
Thanks in advance.
Click to expand...
Click to collapse
Soo you need a stock rom here are some stock roms:
First: http://samsung-updates.com/device/?id=GT-I9505 - A lot of people say to me this is not the official page for samsung roms but for me was so good
Second: http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=0#firmware - This is the official one
I recommend you to use the latest version 4.4.2
SAMPPLE said:
Soo you need a stock rom here are some stock roms:
First: http://samsung-updates.com/device/?id=GT-I9505 - A lot of people say to me this is not the official page for samsung roms but for me was so good
Second: http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=0#firmware - This is the official one
I recommend you to use the latest version 4.4.2
Click to expand...
Click to collapse
Thanks for the info, this is the info i already knew though.
The problem i had was there is no country 'Belgium' in the list. And i wanted to know wich rom they used for the Belgium S4 versions.
Thanks in advance .
Pixelhouse said:
Thanks for the info, this is the info i already knew though.
The problem i had was there is no country 'Belgium' in the list. And i wanted to know wich rom they used for the Belgium S4 versions.
Thanks in advance .
Click to expand...
Click to collapse
So look at this
I have a Samsung Galaxy S2 from Romania... and my stock rom is for Europe and other phone the same thing again Romania phone but France or Germany stock rom
Pixelhouse said:
Thanks for the info, this is the info i already knew though.
The problem i had was there is no country 'Belgium' in the list. And i wanted to know wich rom they used for the Belgium S4 versions.
Thanks in advance .
Click to expand...
Click to collapse
If you wanna receive OTA updates too:
1. Install Kies (for android 4.2.2) or Kies 3 (android 4.3 and android 4.4.2)
2. Conect ur device to ur computer.
3. Take a look your CSC (country code) -> They are always 3 letters. (pic 1 attached)
4. You can now close Kies/3.
5. Go to Sammobile.com and look for the correct CSC (You can live in Belgium but this no means ur phone is builded there) -> For example: My phone is german and conecting it to Kies 3 appears DBT code. I go to Sammobile.com and download the correct firmware for my device (Pic 2)
6. Remember: Don't download "Black EDITION" firmware if your phone isnt that one.
7. Flash the firmware through ODIN.
8. Enjoy
hey,
i'm also from belgium at sammobile you have to search for the rom from luxemburg .
In belgium is the original rom from the country luxemburg
http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=LUX#firmware

Terrible brick of Samsung Galaxy Note 4 SM-N910G

Dear all,
My wife's Note 4 was updating Facebook app 2 days back. But phone became very slow, so she took the battery out and try to reboot the phone. After than, she was unable to start the phone anymore.
This is the screen that it got stuck on :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just flash any stock ROM via Odin. Data could be lost though.
ithehappy said:
Just flash any stock ROM via Odin. Data could be lost though.
Click to expand...
Click to collapse
Did that and got this :
Tried to repair the PIT file and got this.
Got this also at the download mode :
i1magic said:
Dear all,
My wife's Note 4 was updating Facebook app 2 days back. But phone became very slow, so she took the battery out and try to reboot the phone. After than, she was unable to start the phone anymore.
This is the screen that it got stuck on :
Click to expand...
Click to collapse
After waiting at the "Recovery Booting" screen for a long time, I got this :
Which firmware did you flash?
ithehappy said:
Which firmware did you flash?
Click to expand...
Click to collapse
I tried Stock India latest firmware for Android 6.0.1. I also tried, Stock Singapore latest firmware for Android 5.1.1. Both didn't work, gave same error.
Hmm, don't know then mate, it should have worked. Maybe others can help you.
Try someone who can flash with jtag. I had the same problem and no matter what i did, it led me to flash a pit file and brick mine forever. Now my last hope is a guy who can flash with jtag coz my N910F wont even start. Unfortunantely its vacation period so i have to wait for him to be back. Good luck my friend. Keep us posted.
ithehappy said:
Hmm, don't know then mate, it should have worked. Maybe others can help you.
Click to expand...
Click to collapse
The guy at the phone shop (in Singapore) told me that it'll cost about USD$120 to replace the mainboard of the Note 4. Apparently, there are a lot of such failing recently till the mainboard is out of stock. Will need 1 week for the mainboard to come.
Anybody encounter similar problem?
Just curious, does anybody has the solution?
Ok. I guess it is a hardware failure already.
i1magic said:
Just curious, does anybody has the solution?
Click to expand...
Click to collapse
me..
unsuccessfully upgrade my SM-N910G from XSP to Aussie XSA 6.01..
happy with OnePlus Three now.
http://forum.xda-developers.com/note-4/development/rom-note-4-mod-t3244665
i1magic said:
I tried Stock India latest firmware for Android 6.0.1. I also tried, Stock Singapore latest firmware for Android 5.1.1. Both didn't work, gave same error.
Click to expand...
Click to collapse
use the pit file and tick repartition
Samsung Note 4 (SM-N910G) Debrick file need
Samsung Note 4 (SM-N910G) Debrick file need emergency, (which file that i can put on a sd card and placed it into my dead Note 4 in order to it came to downloading mode)

How to get android 7 now - uses uk firmware to update - with samfirm

Hi Guys,
I´d like to tell you how I got the Android 7 Update / Android 7 Firmware on my S7 here in Germany.
Steps:
1) Backup your Device and save important data
2) Download SamFirm to get a fast Download-Link for the Firmware needed.
3) In SamFirm use: Model: SM-G930F; Region: BTU
Pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Download the latest Firmware and flash it with Odin
5) Now update via OTA to the new Android 7 Update!
Does this change Knox status (will i lose warranty)? I'm currently on NEE firmware and would love to get N asap.
Valistaja said:
Does this change Knox status (will i lose warranty)? I'm currently on NEE firmware and would love to get N asap.
Click to expand...
Click to collapse
No, flashing stock doesn't affect KNOX
This method is already being discussed in the main N thread too
Valistaja said:
Does this change Knox status (will i lose warranty)? I'm currently on NEE firmware and would love to get N asap.
Click to expand...
Click to collapse
No. I still got my warranty.
*Detection* said:
No, flashing stock doesn't affect KNOX
This method is already being discussed in the main N thread too
Click to expand...
Click to collapse
Does it wipe my data ? I have RO(MANIA) CSC. Will it work?
Did not worked for me. Still on my Home CSC ... I flashed CSC not home_CSC
It's the same for me. SmartSwitch shows a DBT version although I flashed the CSC from SamFirm.
When I take a look at the CSC on the phone with *#1234# I can see the OXA CSC. I think that's wrong...?
What's wrong? Can u please help me?
Several people from different regions reported this guide and firmware works for them: http://www.theandroidsoul.com/download-galaxy-s7-edge-nougat-ota-update/
I am currently still downloading
If you're coming from DBT, you have to flash TPL/PRT/PLS before BTU!!! After this, it will work...
I am on BTU firmware but is rooted and modified. Can i flash this without loosing data? My status will be official after flashing it without loosing data?
This is my version. Can I get 7?
MultiF95 said:
No. I still got my warranty.
Click to expand...
Click to collapse
how do you know ? Samsung told you ?
Samsung released the Full package of android 7 DPLT UK BTU for S7, You can flash it through ODIN:
https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Please use the dedicated Nougat thread. All this info is in there. Thanks.
https://forum.xda-developers.com/galaxy-s7/how-to/samsung-s7-nougat-final-ota-t3532213

Categories

Resources