G360F booting in TWRP - Samsung Galaxy Core Prime Questions & Answers

Hello. Sorry to bother you with this nonsense, but sometimes minor details become so itchy that one should do something to correct.
I hace a G360F where I installed TWRP. Then, I installed the polish Lollipop to have the newer OS and now, everytime I boot, boots into TWRP. Is not a big deal, because if I ask TWP to reboot to the system, it does so, but would like to recover the normal behaviour.
Thank you in advance for your comments
Regards

Related

[Q] need some help with boot.img

hi guys,
my find 5 was having some reboot issues (it was rebooting a few times per day) and that was a bit anoying. I was using an old original FW so i decided to update to a newer one. Heard good stuff about the Omni so i went for that, so i was using TWRP 2.4.1.0 (i think... i'm sure it was 2.4.x) and on the omni page they said we have to use TWRP 2.6 so i went for an update.
here, i think, i've created my problem. I used the new flashify app to install the TWRP but instead of choose recovery img i choosed to flash the boot and i guess i'd flashed the TWRP on the boot.
well anyaway, now i'd installed the TWRP 2.6.3.1 i manage to start the phone in fastboot and recovery all good here, i install every rom nice and easy over TWRP but the phone simply doesn't start, it gets stuck on Touchscreen Firmware Update please wait.... this happens ALWAYS with what version of TWRP or even if i install CWM...
my guess is that i'd messed up some partition or so i don't really know what but i'd tried to format every partition that TWRP let me and still getting the freackin Touchscreen Frim updt screen... so need some Pro help to help me undo the mistake i'd done...
thanks for everything
On the official Oppo forum's there's a guide on how to install the latest Omnirom. Under known issues it says:
5)After installing the TWRP recovery the Screen Touch firmware update goes on for more than 5-7 minutes, do a hard reboot and you would be fine,
Click to expand...
Click to collapse
I haven't tried it myself since I didn't get the problem when flashing Omni and Asylum, but it seems to be worth a shot.
In case you are looking for the topic, search for "How to Install OmniRom 4.4".

Stuck in bootloop

Hi guys,
I have unlocked the bootloader of my S5e (T720) installed Magisk and TWRP. Wiped the unit and installed Gapps + Lineageos 17.
That said: I keep booting into TWRP...
How to make the unit boot in Lineageos please?
Thanks
Seems like something went wrong with the OS installation. I would advise that you reinstall the OS again.
Did you ever find a solution to this? I am in pretty much the same situation but I didn't use magisk cause I didn't want to root. I tried flashing lineage 16 and 17 after wiping system, data, vendor etc.. I always just seem to end up looping back into TWRP. Not really sure what I'm doing wrong, I do always get the warning asking me to press the power button to continue as I'm not running official software and have an unlocked bootloader so maybe there is some security feature that's still preventing me from getting in? If anyone could offer any help I'd appreciate it a lot, I'm very new to all this.
Yelnat said:
Did you ever find a solution to this? I am in pretty much the same situation but I didn't use magisk cause I didn't want to root. I tried flashing lineage 16 and 17 after wiping system, data, vendor etc.. I always just seem to end up looping back into TWRP. Not really sure what I'm doing wrong, I do always get the warning asking me to press the power button to continue as I'm not running official software and have an unlocked bootloader so maybe there is some security feature that's still preventing me from getting in? If anyone could offer any help I'd appreciate it a lot, I'm very new to all this.
Click to expand...
Click to collapse
Wiping System and Vendor? Why did you do that? That is likely why it doesn't boot. You will likely need to go back to stock to put those back and start over. I've found on these any deviation from the instructions below it's not going to work.
LOS Install Instructions
Magisk worked for me, but on this particular device I've found mods have to be flashed from Magisk afterwards from Magisk and not in TWRP like I do on other devices.
OhioYJ said:
Wiping System and Vendor? Why did you do that? That is likely why it doesn't boot. You will likely need to go back to stock to put those back and start over. I've found on these any deviation from the instructions below it's not going to work.
LOS Install Instructions
Magisk worked for me, but on this particular device I've found mods have to be flashed from Magisk afterwards from Magisk and not in TWRP like I do on other devices.
Click to expand...
Click to collapse
I only deviated when it didn't work, Ironically I fixed the issue by wiping literally everything via TWRP and then trying to reinstall lineageOS. I did have a problem with it taking hours to boot the first time, but I found that I had to install lineageOS without gapps, then reboot into TWRP and flash gapps afterwards. Strange Issue but all is well that ends well I suppose.
Did you guys get a solution for this? I am in the same situation. I have the ROM and Gapps on the external card, and although I installed it again, I am still stuck in this bootloop.

Stuck on boot loader because i accidentally deleted my system files and TWRP not work

Hi, I have a problem when flashing this custom rom that i like. The problem started after i WIPED THE SYSTEM FILES, now im stuck on the bootloader and since i'm stuck on the bootloader i can't also boot to the TWRP recovery screen, when i tried re-flashing the recovery it says its ok but didn't really do the job i need this phone ASAP. i use this for work
sorry for bad english this is not my native language, thanks in advance to who can help me because i really need this phone.
JoshuaBunag12 said:
Hi, I have a problem when flashing this custom rom that i like. The problem started after i WIPED THE SYSTEM FILES, now im stuck on the bootloader and since i'm stuck on the bootloader i can't also boot to the TWRP recovery screen, when i tried re-flashing the recovery it says its ok but didn't really do the job i need this phone ASAP. i use this for work
sorry for bad english this is not my native language, thanks in advance to who can help me because i really need this phone.
Click to expand...
Click to collapse
You can use MiFlash tool to install firmware to your device before flashing other roms.

Mi 9T only booting to TWRP

Hi! I just tried to install my first custom ROM, and I don't really think it worked...
Can someone please look through the steps I took and tell me exactly where I f-ed up and why I'm an idiot? Right now my phone shows the boot logo for a few seconds, and then boots right to TWRP.
Here is what I did:
1. I downloaded resurrection remix and magisk to my computer and transferred the .zips to my Mi 9T.
2. I booted to (the official) TWRP and made a backup. Now, here I know I really f-ed up, because I didn't save the backup on my computer, only on the phone... And I know exactly how stupid that is right now.
3. Anyways, I wiped the data and such according to instructions...
4. ...and installed first the ROM, then magisk.
5. When I tried to reboot it went into TWRP again, and the files looked like they were encrypted. I tried to restore the backup, but of course it was also encrypted.
6. Okay, a tiny bit of panic. Since I can't really do anything, I feel like the only option is to format the data (was that a bad idea? maybe, probably...)
7. I install the latest firmware for Europe and try to install the ROM again. (without magisk this time)
8. it boots (with the xiaomi boot logo) and then straight to TWRP.
9. The last thing I tried was installing xiaomi.eu, and this gave some progress. Now it has a new boot-logo (white Mi logo with mi.com under it. No "powered by android" text). It takes a bit longer to boot, but eventually goes back to TWRP.
I am so sorry if I'm stupid, but can someone please help me with this?
Edit: I solved it. Just had to format data and reboot.
pmcbkr said:
...
3. Anyways, I wiped the data and such according to instructions...
Click to expand...
Click to collapse
Wipe is not the same as format - wiping is much less than formating
If Instructions say to Format, you had to FORMAT DATA (not to wipe)

Which when installing recovery

-hello. First of all, asking forgiveness for using a translator, my English is very bad. I have been trying for several weeks to put a light room and its corresponding recovery. But, I can't install any recovery, the screen is always frozen at the start of the recovery, either TWRP or OrangeFox. Any ideas? I have the bootloader unlocked and I'm on Android 11. Thanks!
anithing?...

Categories

Resources