Hi guys
There it is the things you should know first
MIUI v6 > MiUi v7 > TWRP mod > root > Resurrection Remix
Here it goes
I've decided to install Xposed, ok, flashed and bootlooped
Normally I take off the battery and put it back to reboot in recovery through buttons
So...
So what?
NOTHING
Just a small tux at top right of the screen and it's all
And bonus: fastboot and adb comands is not working, it says device not found even with debugging on
So....
So what?
I GOT A WAY
Flashed the TWRP mod again through the batch file which comes attached and magically it bootted into recovery and I could save my phone
WHAT YOU GUYS THINK ABOUT IT?
PS:
I Will send screenshots quickly
You guys should see
I can't understand why the adb comands doesn't worked but the batch files worked
As they are the same
In miui to enter recovery we used power + vol up button.
but after installing twrp we have to use power + vol up + vol down to enter into recovery.
Try it man.
Thanks buddy
Sorry if this appeared so noob
Actually I have upgraded from a very different device...
So I didn't expect that
satti8893 said:
In miui to enter recovery we used power + vol up button.
but after installing twrp we have to use power + vol up + vol down to enter into recovery.
Try it man.
Click to expand...
Click to collapse
button combo does not work for my redmi 2 with twrp 2.8.7,1 with custom rom (RR, CM... 5.5.1 based)
neiother recovery nor fasboot
i could boot to mi-revovery with miui 6 and 7
?!
the onlyt ways i could get there is rebooting from rom menu or with .bat reinstalling my twrp
crullick said:
button combo does not work for my redmi 2 with twrp 2.8.7,1 with custom rom (RR, CM... 5.5.1 based)
neiother recovery nor fasboot
i could boot to mi-revovery with miui 6 and 7
?!
the onlyt ways i could get there is rebooting from rom menu or with .bat reinstalling my twrp
Click to expand...
Click to collapse
I used to have this problem too. I re-flashed to a different TWRP version (2.8.6.1) using fastboot and then the power + vol up & vol down button combination magically worked.
A while after that I updated to the new TWRP (2.8.7.1) again and it still works. No clue what made the difference though.
Hope this resolves your problem.
ChrisNL said:
I used to have this problem too. I re-flashed to a different TWRP version (2.8.6.1) using fastboot and then the power + vol up & vol down button combination magically worked.
A while after that I updated to the new TWRP (2.8.7.1) again and it still works. No clue what made the difference though.
Hope this resolves your problem.
Click to expand...
Click to collapse
thnx for the advice!
though i did change twrp, but from one 2.8.7.1 to another (themed differently)
will try your magic :fingers-crossed:
android works in misterious ways
crullick said:
thnx for the advice!
though i did change twrp, but from one 2.8.7.1 to another (themed differently)
will try your magic :fingers-crossed:
android works in misterious ways
Click to expand...
Click to collapse
Hope it works, let me/us know
ChrisNL said:
Hope it works, let me/us know
Click to expand...
Click to collapse
funny?!!
Chris you're a savior
flashed an earlier 2.8.6.1 then went back to .7.1 and it worked
[don't know if it's supposed to work just from the phone being completely shut down << lack of experience with redmi/twrp >> can't do it from frozen and/or while it's rebooting, but it's good enough for me]
thank you once again brother!
crullick said:
funny?!!
Chris you're a savior
flashed an earlier 2.8.6.1 then went back to .7.1 and it worked
[don't know if it's supposed to work just from the phone being completely shut down << lack of experience with redmi/twrp >> can't do it from frozen and/or while it's rebooting, but it's good enough for me]
thank you once again brother!
Click to expand...
Click to collapse
Weird that it works that way :silly: but I'm glad it also worked out for you!
Use this application to boot your phone to recovery mode..... "Quick reboot"
robinu2606 said:
Use this application to boot your phone to recovery mode..... "Quick reboot"
Click to expand...
Click to collapse
You can also select "Advanced Reboot" from the developer options.
But if the phone was loopbooting I don't think you have a chance of doing it.
Related
Hi all,
I think I am in some serious trouble right now.. I tried to flash the latest carbon ROM on my device, but completely
forgot to flash the kernel.
I cannot connect to my device using adb (really can't remember if i didn't enable it, been flashing a couple of ROMS tonight ).
I can however, use fastboot.. But what use is that? Can I somehow restore or get to my recovery?
Any help is appreciated!!
Thanks in advance.
Godfather123 said:
Hi all,
I think I am in some serious trouble right now.. I tried to flash the latest carbon ROM on my device, but completely
forgot to flash the kernel.
I cannot connect to my device using adb (really can't remember if i didn't enable it, been flashing a couple of ROMS tonight ).
I can however, use fastboot.. But what use is that? Can I somehow restore or get to my recovery?
Any help is appreciated!!
Thanks in advance.
Click to expand...
Click to collapse
power off
vol down n power on. then un press vol down for 1 sec.. continue press vol up n down, it ask for hard reset. then press power button 2 times. it will move to recovery.
shaldi said:
power off
vol down n power on. then un press vol down for 1 sec.. continue press vol up n down, it ask for hard reset. then press power button 2 times. it will move to recovery.
Click to expand...
Click to collapse
Hi,
Thanks for the fast reply, but I can't get to recovery.. I've already tried this several times..
Any other suggestions?
EDIT:
It just hangs in black screen, and doesn't get any further when I try this.
Godfather123 said:
Hi,
Thanks for the fast reply, but I can't get to recovery.. I've already tried this several times..
Any other suggestions?
EDIT:
It just hangs in black screen, and doesn't get any further when I try this.
Click to expand...
Click to collapse
If you got to the hard reset screen and pressed power two times but could not get to recovery, its possible that you no longer have any recovery (CWM or TWRP). In some roms, a recovery image is sometimes flashed overwriting the recovery image that you previously installed.
Best bet may be is get back to stock. Try this thread, hope it helps.
Hi guys,
I recently installed CM10.2 on my E612F but I have no longer access to CWM recovery. I reinstalled it but still doesn't work. I tried either the "reboot recovery" in terminal or pressing volume down+ power button. Does anyone know how to fix this ? thanks
HELP
jordiiB said:
Hi guys,
I recently installed CM10.2 on my E612F but I have no longer access to CWM recovery. I reinstalled it but still doesn't work. I tried either the "reboot recovery" in terminal or pressing volume down+ power button. Does anyone know how to fix this ? thanks
Click to expand...
Click to collapse
to access the CWM you have to hold down volume up and down, home button, and power button. once the phone vibrates once, stop pressing the power button. keep holding the other buttons until it goes to CWM.
MooSeKilla said:
to access the CWM you have to hold down volume up and down, home button, and power button. once the phone vibrates once, stop pressing the power button. keep holding the other buttons until it goes to CWM.
Click to expand...
Click to collapse
:good: Thanks ! but after I locked and reunlocked my bootloader it worked fine with the Power menu
Respond
jordiiB said:
:good: Thanks ! but after I locked and reunlocked my bootloader it worked fine with the Power menu
Click to expand...
Click to collapse
wellcan you help me lol every time i flash the bootloader my phone goes into a boot loop
MooSeKilla said:
wellcan you help me lol every time i flash the bootloader my phone goes into a boot loop
Click to expand...
Click to collapse
What exactly is your phone model ? E610 12 12F ... ? I have the 12F so need to flash the E610 unlocked bootloader, not the E612's.
REspond
jordiiB said:
What exactly is your phone model ? E610 12 12F ... ? I have the 12F so need to flash the E610 unlocked bootloader, not the E612's.
Click to expand...
Click to collapse
its alright i fixed my phone i used KDZ updater to get a ROM that had CWM already in it
MooSeKilla said:
its alright i fixed my phone i used KDZ updater to get a ROM that had CWM already in it
Click to expand...
Click to collapse
alright
Problem
Hey folks!!
I have an problem in my cm10.2 rom..
In my phone the OWNER quick setting tile is not working
I've factory reset my phone but nothing change&Play store is also not openinghttp://forum.xda-developers.com/images/smilies/crying.gif
plz help me
10x in advance!!!
jontisavani said:
Hey folks!!
I have an problem in my cm10.2 rom..
In my phone the OWNER quick setting tile is not working
I've factory reset my phone but nothing change&Play store is also not openinghttp://forum.xda-developers.com/images/smilies/crying.gif
plz help me
10x in advance!!!
Click to expand...
Click to collapse
hello, I'm no longer on CM10.2 so can't really help you. Try CM11, I find it pretty cool even if it's still in BETA 3.
Btw do you use Snapchat ? because video recording isn't working on my phone don't know why :/
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
Click to expand...
Click to collapse
Try flashing stock rom through fastboot: http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
Try Flashing stock rom through TWRP: http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
You said that you are unable to get to recovery with the volume keys but I think you are doing it wrong. So to get to recovery power off the device by holding the power button. And then keep holding volume down and power button until you see the oneplus logo and feel the vibration. Let go of both of the buttons once the vibration finish's because if do it to early it will not go to twrp. If if does not work try multiple times
Dead oneplus2.
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
Bibin John said:
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
I dont know. i tried to instal the 3.0.2 sending the firmware to the folder downloads and then i restarted the op2 in recovery mode and the choosed the option to instal from the internal storage.
Click to expand...
Click to collapse
ciroportugues said:
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
Click to expand...
Click to collapse
Try this mega unbrick guide and try all the methods if the other ones do not work: https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Hi, I followed this guide to root my S8+ https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
Let's just say that I used the TWRP for the S8 instead of the S8+ and now I'm stuck at "swipe to allow modification", is there a way to unbrick the phone and maybe flash it back to stock?
I saw some threads that say to wait for the battery to die (I'm at 80% so it seems I gotta wait a long time) but after that what do I do? Do I try again to start it in download mode again and maybe this time use the correct TWRP or is there another option?
Thanks.
Edit 1: Battery lost 1% in an hour, this is gonna take a while
Edit 2: The power button + volume down button method doesn't work because the phone keeps rebooting the TWRP interface
Solved: Somehow repeating the action power button + volume down + Bixby button made my phone boot into download mode and now I've flashed the correct version of TWRP and touchscreen is responsive.
flash twrp mount fix and nx kernel
khawarjaved said:
flash twrp mount fix and nx kernel
Click to expand...
Click to collapse
If you were to explain this to a child?
Can you boot back into phone normally ( press power button + volume down button until phone restart then release.)
If you can check in developer section to make sure OEM is unlocked and USB debugging on
Restart into download and reflash correct twrp for s8+ ( U can still use the link in your op if you like )
spawnlives said:
Can you boot back into phone normally ( press power button + volume down button until phone restart then release.)
If you can check in developer section to make sure OEM is unlocked and USB debugging on
Restart into download and reflash correct twrp for s8+ ( U can still use the link in your op if you like )
Click to expand...
Click to collapse
I'm sorry but the phone keeps rebooting the TWRP Interface even though I used the power button + volume down button method. I'm afraid I gotta wait for the battery to die. It's at 51% now
So you can you reboot and get into download mode at all. If so try and flash right twrp.
Also this is the latest twrp for s8+
https://dl.twrp.me/dream2lte/
This might be a better guide for you to install twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
spawnlives said:
So you can you reboot and get into download mode at all. If so try and flash right twrp.
Also this is the latest twrp for s8+
https://dl.twrp.me/dream2lte/
This might be a better guide for you to install twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
Click to expand...
Click to collapse
Thanks, I flashed the correct TWRP and touch screen is responsive.
diamante0018 said:
Thanks, I flashed the correct TWRP and touch screen is responsive.
Click to expand...
Click to collapse
same problem, please tell me the solution
hassan9922 said:
same problem, please tell me the solution
Click to expand...
Click to collapse
I don't remember
I am super new to rooting I mainly use it for PokemonGo. I am following this video on YouTube.
Basically when I flashed via Odin, I then install Magisk. Then everything is working and rooted BUT when I restart my phone my Magisk is then magically unrooted (I dont know if this is the right term) it says 'Magisk is not installed' and underneath that is says 'Magisk Manager is up to date'
So why does it keep doing this? Everytime this happens I need to Flash again via Odin and do the whole procedure again. This only happens when I restart the phone. Why does it keep doing this and how do I fix this? I will pay someone who can fix this for me. Ive been trying to figure out for the past day and Im going insane. I have no knowledge about rooting etc like i said i just want to play Pokemongo location spoofing.
Appreciate everyones help.
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
littlepuppies said:
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
Click to expand...
Click to collapse
Donkeykong307 said:
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Click to expand...
Click to collapse
How do I do that?
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Donkeykong307 said:
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Click to expand...
Click to collapse
Hi yes I remember doing the 'Power + Bixby + Volume Up' after flashing. So that part is done unless I'm doing something wrong?
What is this advance restart in developer options? Where is that and what does it do? If I do this what do I do after? Will this fix the Magisk not installed when I restart my phone? Also when I turn off my phone and turn it back on it works and it keeps Magisk so its just restarting the phone that is causing the problem.
Appreciate your help
So this topic is the same as the other one I replied to hence the "double vision" comment.
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Donkeykong307 said:
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Click to expand...
Click to collapse
If I press that when I restart phone then isn't that risky? If I mess up then I need to format my phone again to get magisk again?
Whats this advance rebooting? Will this fix my problem?
I followed this video https://youtu.be/o3a8YnWT3yk
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Donkeykong307 said:
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Click to expand...
Click to collapse
I'm really confused so which part of the video am I suppose to do?
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Donkeykong307 said:
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Click to expand...
Click to collapse
OK so everything I restart my phone I need to hold down bixy, volume up and power? When do i stop holding down the combo? Also let's say I mess up will my magisk not work or can I restart my phone again and do the combo or do I have to re flash via Odin and format phone? Sorry I just want to make sure because I've re flashed and formated my phone about 90000 times ?
Thank you
littlepuppies said:
OK so everything I restart my phone I need to hold down bixy, volume
Click to expand...
Click to collapse
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
blackspy_ said:
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
Click to expand...
Click to collapse
Thata so confusing especially the twrp guide
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
elliwigy said:
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
Click to expand...
Click to collapse
elliwigy, are you being sarcastic there ?
blackspy_ said:
elliwigy, are you being sarcastic there ?
Click to expand...
Click to collapse
nope