I got the kdz for lg g pad 7.0 v410 - G Pad 10.1 General

i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2

looks like its working for me, in process of rooting now

dopekid313 said:
i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2
Click to expand...
Click to collapse
Very nice sir! It's about time this leaked! I'd hit thanks more than once if it would let me.
I've never needed it, but always been just a little cautious with this little tablet due to not being able to do a full firmware restore myself.
You should be getting a flood of praise from all the folks who took the lollipop OTA and lost the ability to root and run bumped boot images. :good:

I recommend using timmytim v410 stock rom after downgrading with the kdz because the kdz is simply a test kdz lol so just Google : V410 Stock Rom

Password
Mine asked me for a pin or password to decrypt. What did I do wrong?

drumm3rb0y said:
Mine asked me for a pin or password to decrypt. What did I do wrong?
Click to expand...
Click to collapse
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should

dopekid313 said:
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should
Click to expand...
Click to collapse
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up

drumm3rb0y said:
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up
Click to expand...
Click to collapse
Did you use cse flash? With the lg flash tool?

I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.

drumm3rb0y said:
I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.
Click to expand...
Click to collapse
You must use cse bro

So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally

drumm3rb0y said:
So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally
Click to expand...
Click to collapse
Put it in download mode then plug it in then open the lg flash tool 2014 and leave everything as is then put the file in the directory then click cse flash then leave the language and stuff as is then just hit start and let everything do its thing sorry if I wasn't too specific but you should be able to figure out out with the details I gave you

Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong

drumm3rb0y said:
Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong
Click to expand...
Click to collapse
No you did it right its suppose to say that because it's a test kdz lol just root and flash timmytim stock rom

Last question. If I try the software update feature it should connect to the AT&T server and download them?

drumm3rb0y said:
Last question. If I try the software update feature it should connect to the AT&T server and download them?
Click to expand...
Click to collapse
Yeah of course

Got this error [emoji15]

Mervingio said:
Got this error [emoji15]
Click to expand...
Click to collapse
Did you put the phone in download mode before you started?

dopekid313 said:
Did you put the phone in download mode before you started?
Click to expand...
Click to collapse
Yes

Mervingio said:
Yes
Click to expand...
Click to collapse
And did cse flash?

Related

[Q] Urgent help! update auto installed, and bricked my phone.

I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Edit:
Stuck on a bootloop, the LG logo flashes for a second, then its a lighted black screen. I plug my phone inot the pc, and 20 windows popup asking If I want to format G drive.
No twrp installed.
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
XxZombiePikachu said:
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Click to expand...
Click to collapse
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
actually he does not want kitkat apparently
---------- Post added at 11:38 PM ---------- Previous post was at 11:33 PM ----------
Dreamincolr said:
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
Click to expand...
Click to collapse
you can try this but you need Ubuntu and I'm not exactly sure it will work(also you need to find the correct files for your model), also if your phone is under warranty you can try taking it to att store and telling them update killed your phone but of course don't mention anything about root
sorry forgot to put actual link http://forum.xda-developers.com/showthread.php?t=2582142
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
XxZombiePikachu said:
actually he does not want kitkat apparently
Click to expand...
Click to collapse
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Dreamincolr said:
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Click to expand...
Click to collapse
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
XxZombiePikachu said:
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Ah, yeah, I cant even get into the factory hard reset. It just turns off and on to a black screen. Thank you for your help, though.
Im freaking out, -_-. I regret for even allowing it to update, I should have tried to turn the phone off.
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
he can't access download mode, if you would read you would know
XxZombiePikachu said:
he can't access download mode, if you would read you would know
Click to expand...
Click to collapse
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
How do I even do this? my pc isnt even recognizing the phone.
podagee said:
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
Click to expand...
Click to collapse
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Dreamincolr said:
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Click to expand...
Click to collapse
dont format it.
okay now you have to be quick when you do this to get into download mode...
plug your usb into your phone and have it hanging in the usb port in the computer or plug.
now hold the power button until it turns off.
quickly plug in the port/plug and hold the up button.
you have to do it really quickly. took me a few tries.
once in download mode restore to factory whichever image you choose.
ive had this done a couple times to my phone and it does work if you act quickly.
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
missiveusa said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Schindler069 said:
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Click to expand...
Click to collapse
Makes me wish I owned linux. Ill continue to look, but thanks
Dreamincolr said:
Makes me wish I owned linux. Ill continue to look, but thanks
Click to expand...
Click to collapse
Just get a virtual machine, it does the job just fine.
I did it with VirtualBox and Ubuntu. And make sure, you disable auto mount usb in ubuntu to prevent opening the 20 "partition" windows.

Help with imei null

i have bin trying to use this method http://forum.xda-developers.com/showthread.php?t=1942417 to fix my imei but the pc only shows com ports when the device is download mode. i have tried to flash efs backup from someone else but no effect ....yah i know its not legal but that ddnt work either. i have flashed stock jb via tot many tyms still nothing. i am starting to think that since the phone came with a 802 firmware i should flash a tot from 802 jb... even though the backcover of the phone is written 801. will that help??:confused
edit....also when i flash the stock d801 jb the phone is constantly rebooting could that be a sign that its not meant to be ....should i download the d802 tot
Don't you have a backup in your recovery?
v.konvict said:
i have bin trying to use this method http://forum.xda-developers.com/showthread.php?t=1942417 to fix my imei but the pc only shows com ports when the device is download mode. i have tried to flash efs backup from someone else but no effect ....yah i know its not legal but that ddnt work either. i have flashed stock jb via tot many tyms still nothing. i am starting to think that since the phone came with a 802 firmware i should flash a tot from 802 jb... even though the backcover of the phone is written 801. will that help??:confused
edit....also when i flash the stock d801 jb the phone is constantly rebooting could that be a sign that its not meant to be ....should i download the d802 tot
Click to expand...
Click to collapse
ceza1380 said:
Don't you have a backup in your recovery?
Click to expand...
Click to collapse
not my backup. i tried with someone elses backup which has efs backup but nothing changed
Try these links
http://forum.xda-developers.com/showthread.php?t=2451390
http://forum.xda-developers.com/showthread.php?t=2582811
v.konvict said:
not my backup. i tried with someone elses backup which has efs backup but nothing changed
Click to expand...
Click to collapse
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
Also this link tells how to restore lost IMEI on LG G2. Please read carefully and do what they want. Maybe there is chance for you. I wish you can fix your phone buddy :good:
http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/
ceza1380 said:
Try these links
http://forum.xda-developers.com/showthread.php?t=2451390
http://forum.xda-developers.com/showthread.php?t=2582811
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
Also this link tells how to restore lost IMEI on LG G2. Please read carefully and do what they want. Maybe there is chance for you. I wish you can fix your phone buddy :good:
http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/
Click to expand...
Click to collapse
i am currently trying http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/ but my touch screen is broken so the part were i have to select to set usb diag i can click it. is there any app that you know that can set usb diag for me.
v.konvict said:
i am currently trying http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/ but my touch screen is broken so the part were i have to select to set usb diag i can click it. is there any app that you know that can set usb diag for me.
Click to expand...
Click to collapse
okay nevermind the rotation i managed to force rotation and select usb diag ...but when i try to the backup i get disk error while writing to file. any workarounds??
So your phone gives that error or pc? What ROM installed right now?
v.konvict said:
okay nevermind the rotation i managed to force rotation and select usb diag ...but when i try to the backup i get disk error while writing to file. any workarounds??
Click to expand...
Click to collapse
ceza1380 said:
So your phone gives that error or pc? What ROM installed right now?
Click to expand...
Click to collapse
i have stock 4.4.2 rom. the error is in qpst. step number 12 in http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/
sorry but would know how to use efs proffesional
v.konvict said:
i have stock 4.4.2 rom. the error is in qpst. step number 12 in http://www.droidviews.com/how-to-backup-and-restore-lost-imei-on-lg-g2/
sorry but would know how to use efs proffesional
Click to expand...
Click to collapse
Hi, Did you solve your problem with the IMEI, I have exactly the same problem
Meppolan said:
Hi, Did you solve your problem with the IMEI, I have exactly the same problem
Click to expand...
Click to collapse
nop i ddnt fix it. actually i continued to flash kdz until i f****ed it up. had to change the motherboard.
v.konvict said:
nop i ddnt fix it. actually i continued to flash kdz until i f****ed it up. had to change the motherboard.
Click to expand...
Click to collapse
oooer.... didn't think you could possibly damage the motherboard from kdz flashes!
Meppolan said:
oooer.... didn't think you could possibly damage the motherboard from kdz flashes!
Click to expand...
Click to collapse
Nop only with the wrong kdz flash.
The phone ddnt have download mode...no recovery n was not booting up...

Poll - Is root working for you? (T-Mobile Variant ONLY)

I want to take a poll, and this will be for T-Mobile variants ONLY. Being that the thread has people from all different carriers posting results, i think it's rather confusing to anyone reading along trying to decide whether or not to give it a shot.
So, have you successfully rooted/TWRP'd your TMOBILE variant LGv20?
thatisandwas said:
I want to take a poll, and this will be for T-Mobile variants ONLY. Being that the thread has people from all different carriers posting results, i think it's rather confusing to anyone reading along trying to decide whether or not to give it a shot.
So, have you successfully rooted/TWRP'd your TMOBILE variant LGv20?
Click to expand...
Click to collapse
Yes I have. Full root access with working TWRP and supersu. No issues as of yet but I've not tried anything other than TB.
I got it rooted with twrp be warned though my other lg I flashed a file and now bootloop
bambam126 said:
I got it rooted with twrp be warned though my other lg I flashed a file and now bootloop
Click to expand...
Click to collapse
what file?
czerdrill said:
what file?
Click to expand...
Click to collapse
Build prop edit and google assistant..: /
bambam126 said:
Build prop edit and google assistant..: /
Click to expand...
Click to collapse
Ah ok, i thought i saw someone say earlier the google assistant thing worked for them, but they might have manually edited the build prop.
czerdrill said:
Ah ok, i thought i saw someone say earlier the google assistant thing worked for them, but they might have manually edited the build prop.
Click to expand...
Click to collapse
Yeah maybe I'm trying to get out this loop
bambam126 said:
Yeah maybe I'm trying to get out this loop
Click to expand...
Click to collapse
You're not going to get out of it without restoring your backup or manually placing the normal build prop inside recovery
jthrasher47 said:
You're not going to get out of it without restoring your backup or manually placing the normal build prop inside recovery
Click to expand...
Click to collapse
I can't restore I did a factory wipe and didnt work I'm on lg support tool but upgrade recovery says no items to fix and lgup sees phone as unknown but my non looping v20 it sees just fine
Idk what to do lg mobile support tool gives me up but says no items to fix
You did not do a backup in twrp before flashing your file? You may have to exchange your phone you should always make a backup especially with things this new
Unlocked and rooted with no problems. I flashed a systemless hosts file for ad away in twrp and everything was fine. For assistant, I manually edited the build.prop file and restarted, which worked great. I almost feel guilty as to how easy this whole process has been.
jthrasher47 said:
You did not do a backup in twrp before flashing your file? You may have to exchange your phone you should always make a backup especially with things this new
Click to expand...
Click to collapse
what can i do with that backup I cant get into twrp...
Full root,twrp,l speed... Loving it
Sent from my LG-H918 using XDA-Developers mobile app
kibmikey1 said:
Unlocked and rooted with no problems. I flashed a systemless hosts file for ad away in twrp and everything was fine. For assistant, I manually edited the build.prop file and restarted, which worked great. I almost feel guilty as to how easy this whole process has been.
Click to expand...
Click to collapse
LOL wanna make a video? I'm gonna do it tonight, i am just nervous.
AT&T Tried Yet ?
bambam126 said:
I can't restore I did a factory wipe and didnt work I'm on lg support tool but upgrade recovery says no items to fix and lgup sees phone as unknown but my non looping v20 it sees just fine
Idk what to do lg mobile support tool gives me up but says no items to fix
Click to expand...
Click to collapse
I assume the build prop edit changes the device name. Therefore lg up won't recognize it. You will need a custom .dl file with the name edited. At least that is what used to happen back in the day when I was working with these phones. There used to be a program that made it possible to edit the .dl file.
justinswidebody said:
I assume the build prop edit changes the device name. Therefore lg up won't recognize it. You will need a custom .dl file with the name edited. At least that is what used to happen back in the day when I was working with these phones. There used to be a program that made it possible to edit the .dl file.
Click to expand...
Click to collapse
LG sees it as the v20 but can't do anything cause no software updates or whatever
bambam126 said:
LG sees it as the v20 but can't do anything cause no software updates or whatever
Click to expand...
Click to collapse
Have you tried to fast boot flash the stock system img
---------- Post added at 05:36 PM ---------- Previous post was at 05:33 PM ----------
bambam126 said:
LG sees it as the v20 but can't do anything cause no software updates or whatever
Click to expand...
Click to collapse
If that doesn't work, you should be able to put the system IMG on SD card and DD command it
justinswidebody said:
Have you tried to fast boot flash the stock system img
Click to expand...
Click to collapse
What's the command I tried something it says remote command failed or something
bambam126 said:
What's the command I tried something it says remote command failed or something
Click to expand...
Click to collapse
When in fast boot type fastboot flash system then drag the image in the command prompt

t-mobile v20 h91810p twrp installation help!

I know I need to rollback my version to 10k, however I am stymied by antirollback problems using lgup! I could really use some assistance on getting this to rollback to 10k. I have been reading the forums for 2 days now, hundreds of posts, and nothing works. I cant use the dirty cow method of installing twrp as it was patched and my phone auto downloaded the stupid update... Any help would be much appreciated.
Thanks Zernon916
You can't. You're stuck on P. You said it yourself it is anti roll back.
Gytole said:
You can't. You're stuck on P. You said it yourself it is anti roll back.
Click to expand...
Click to collapse
So no one has rooted it yet?
No
Hopefully it comes soon.
I might have a solution. If you are willing to try.. Let me know.
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
Lets hear it ehhe
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
popwar said:
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Click to expand...
Click to collapse
let me know what you guys did as I could try looking into it
dudeawsome said:
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
let me know what you guys did as I could try looking into it
Click to expand...
Click to collapse
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
popwar said:
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
Click to expand...
Click to collapse
so essentially it never actually flashed twrp
dudeawsome said:
so essentially it never actually flashed twrp
Click to expand...
Click to collapse
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
popwar said:
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
Click to expand...
Click to collapse
I tried this method out but when i press start the lgup just crashes
dudeawsome said:
I tried this method out but when i press start the lgup just crashes
Click to expand...
Click to collapse
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
yeah send it over
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
popwar said:
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
Click to expand...
Click to collapse
didnt work sadly
dudeawsome said:
didnt work sadly
Click to expand...
Click to collapse
The link?
popwar said:
The link?
Click to expand...
Click to collapse
no link worked but it didnt flash
dudeawsome said:
no link worked but it didnt flash
Click to expand...
Click to collapse
What does it do/say

Samsung Galaxy A5 (2016) with FRP Lock

Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
exaveal said:
Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
Click to expand...
Click to collapse
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
InfernoWolf19 said:
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
Click to expand...
Click to collapse
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Cainnub said:
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Click to expand...
Click to collapse
No you don't need payment method for downloading from sammobile, Only needed if you want to download at high speeds. Provide me the link where you found your firmware from sammobile. With that link, I can download it, upload it to high speed servers, and then give you the link where you can download. I am asking for the link as I don't know what country you live in and therefore don't know the correct firmware. By the what I mean SM-A510xx, replace the "xx" and give the country code or the country you live in so that I can find the firmware as the number you gave me (A510FXX7CRJ6) is not what I meant and that number is a firmware number and not the device number.
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Cainnub said:
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Click to expand...
Click to collapse
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. You flash it the same way as you flash TWRP but just use the stock firmware. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
InfernoWolf19 said:
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
Click to expand...
Click to collapse
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Oh. Ok I belive that the FRP lock won't stop the install as the phone is in download mode and the fact that you are flashing stock firmware.
---------- Post added at 09:32 PM ---------- Previous post was at 09:20 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
How is the download going? Really slow right? 15kb... and in chrome - I had to download my firmware at 5kb :crying:
---------- Post added at 10:08 PM ---------- Previous post was at 09:32 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Good luck on flashing. Hope it is successful.
---------- Post added at 10:08 PM ---------- Previous post was at 10:08 PM ----------
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
You have two options. The google account has a cool off period and I read that if you wait 24 hours, the login will be gone. However, on old android phones, you have to wait 72 hours. But if you go to a Samsung service center, they will remove the logins for free.
I found this website where you can bypass the lock but I am not sure if it works. Do the samsung bypass and not any other brands. Try it anyway: https://www.unlockunit.com/blog/bypass-google-account-verification-factory-reset-protection/
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
Did you get pass the login screen?
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Cainnub said:
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Click to expand...
Click to collapse
How did it go?

Categories

Resources