Related
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it
**WARNING** You need to have background knowledge of adb, fastboot, twrp, sideload.. before you can go on with this thread.
1. All credits go to @shakalaca. If you like his work, please make him a small donation for encouragement.
2. This is a systemless root. Yet you need to unlook Lollipop before upgrading to Marshmallow.
3. Flashing the attached SuperSU file modifies stock boot.img. In case you receive an OTA file later, do
**REMEMBER to FLASH BACK TO STOCK Android 6.0 BOOT.IMG** to unroot before upgrading to official Android 6.0.
Root:
1. Unlock your device in Lollipop, then upgrade to Android 6.0
2. Once you are in Android 6.0, fire the following command to boot twrp. <twrp.img> is the twrp recovery file. This TWRP is recommended.
HTML:
adb reboot-bootloader
fastboot boot <twrp.img>
3. adb sideload the attached SuperSu file in twrp. /OR install the SuperSU in twrp if you saved it in device storage.
4. reboot system. You will see a warning screen saying "Your device has failed Verification". Ignored it and wait for the reboot.
5. Done
Unroot:
Just flash back stock boot.img
Xposed:
1.Flash the attached Xposed file from twrp.
2.use Material Design Xposed Installer: Download Xposed Installer here
Downgrade to Lollipop:
In case you need to downgrade to Lollipop, follow the instructions with care. Do it at your risk.
Refer to Asus Zentalk Forum and grab the required files from there.
HTML:
fastboot flash token bom-token.bin
fastboot flash ifwi ifwi_ann_a0-mofd_v1-ze551ml.bin
fastboot flash fastboot droidboot.img
fastboot flash splashscreen splashscreen_ze551ml.img
fastboot reboot-bootloader
Now you are back in Lollipop. You can flash back stock recovery(.184 recommended), wipe the device(cache/userdata/system) and then sideload back stock LP or MM as you wish. OR, you can flash custom recovery/boot/system.img start from here.
Good luck!
It worked!Thank you master!I bow now....
I just need root on 6.0.1. Is this going to achieve that?
MikeyLee said:
I just need root on 6.0.1. Is this going to achieve that?
Click to expand...
Click to collapse
According to op it will
Sent from my ASUS_Z00AD using Tapatalk
It does work, but YMMV, my phone is one of the few that works completely with the beta software. But before running fastboot cmd in adb. Use adb reboot recovery, then fastboot cmd. Phone will reboot twice after sideload of SU.
pokey006 said:
It does work, but YMMV, my phone is one of the few that works completely with the beta software. But before running fastboot cmd in adb. Use adb reboot recovery, then fastboot cmd. Phone will reboot twice after sideload of SU.
Click to expand...
Click to collapse
Hi Brother would you like be so patient and provide us with detailed toturial for less advanced users?
samcjtsai said:
1. All credits go to @shakalaca and I just try to recap his threads posted in Taiwan Asus Zentalk forum. Although this is reported working in the forum but, as usual, do it at your risk and I won't be able to answer your questions.
2. Android 6.0 is still not unlocked. Device will be locked once you upgrade to 6.0
3. You can downgrade to Lollipop and unlock again.
4. The following SuperSU file contains a modified boot.img. In case you receive an OTA file later, do
**REMEMBER to FLASH BACK TO STOCK Android 6.0 BOOT.IMG** before upgrading to official Android 6.0.
Root:
1. Make sure your zenfone 2 is unlocked before upgrading to Android 6.0 from Lollipop.
2. Once you are in Android 6.0, fire the following command to boot twrp. <twrp.img> is the twrp recovery file. Version 2.8.7.7 is recommended.
HTML:
fastboot boot <twrp.img>
3. adb sideload the attached SuperSu file in twrp.
4. reboot system. You will see a warning screen saying "Your device has failed Verification". Ignored it and wait for the reboot.
5. Done
Xposed:
1.Flash the attached Xposed file from twrp.
2.use Material Design Xposed Installer: link
Downgrade to Lollipop:
Refer to this and get the files from the links. Note the first commnad line is the revised one by @shakalaca and it should work.
HTML:
fastboot flash token bom-token.bin
fastboot flash ifwi ifwi_ann_a0-mofd_v1-ze551ml.bin
fastboot flash fastboot droidboot.img
fastboot flash splashscreen splashscreen_ze551ml.img
Click to expand...
Click to collapse
Works like a charm !! Thanks !!
kamyk70 said:
Hi Brother would you like be so patient and provide us with detailed toturial for less advanced users?
Click to expand...
Click to collapse
Assuming that everyone knows how to use adb and its commands
1: Well first make sure adb and drivers are on your pc.
2: Plug phone in make sure USB debugging is on
3: In adb cmd window type "adb devices" to make sure phone is recognized, if so proceed
4: type "adb reboot recovery" phone should boot into recovery with android robot on screen
5: Then type "fastboot boot <twrp.img>" twrp.img is whatever your file is named
6: phone will boot into recovery, go to adb sideload in recovery
7: type "adb sideload <SU.zip>" or whatever you have it named
8: After it's done loading reboot from recovery, it will reboot twice and the screen will say as per OP
9: After phone optimizes...enjoy root.
This is for advanced users
when update to 6.0. bootloader unlocked again ! how can i flash twrp ?
pokey006 said:
Assuming that everyone knows how to use adb and its commands
1: Well first make sure adb and drivers are on your pc.
2: Plug phone in make sure USB debugging is on
3: In adb cmd window type "adb devices" to make sure phone is recognized, if so proceed
4: type "adb reboot recovery" phone should boot into recovery with android robot on screen
5: Then type "fastboot boot <twrp.img>" twrp.img is whatever your file is named
6: phone will boot into recovery, go to adb sideload in recovery
7: type "adb sideload <SU.zip>" or whatever you have it named
8: After it's done loading reboot from recovery, it will reboot twice and the screen will say as per OP
9: After phone optimizes...enjoy root.
This is for advanced users
Click to expand...
Click to collapse
To that to work does WE need to have bootloader UNLOCKED ? just really confused atm.
Vouga said:
To that to work does WE need to have bootloader UNLOCKED ? just really confused atm.
Click to expand...
Click to collapse
No it does not
Vouga said:
To that to work does WE need to have bootloader UNLOCKED ? just really confused atm.
Click to expand...
Click to collapse
He's using whats called "tethered TWRP". It's basically running twrp on your phone from your computer instead of actually installing it (which would require unlocking).
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
He's using whats called "tethered TWRP". It's basically running twrp on your phone from your computer instead of actually installing it (which would require unlocking).
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thank You for explaining that to me, appreciated!
To downgrade to Lollipop, is it possible to just use AsusFlashToolInstaller and flash raw firmware? Any harms by doing that?
Thank you in advance.
euthic said:
To downgrade to Lollipop, is it possible to just use AsusFlashToolInstaller and flash raw firmware? Any harms by doing that?
Thank you in advance.
Click to expand...
Click to collapse
You need to adb sideload all LP .184 images first then use Asus FlashTool to flash RAW Firmware.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
root works perfect along with systemless xposed, but i still cant pass safenet check..(super su disabled, and also xposed) so no AP.. is that normal ?
pokey006 said:
Assuming that everyone knows how to use adb and its commands
1: Well first make sure adb and drivers are on your pc.
2: Plug phone in make sure USB debugging is on
3: In adb cmd window type "adb devices" to make sure phone is recognized, if so proceed
4: type "adb reboot recovery" phone should boot into recovery with android robot on screen
5: Then type "fastboot boot <twrp.img>" twrp.img is whatever your file is named
6: phone will boot into recovery, go to adb sideload in recovery
7: type "adb sideload <SU.zip>" or whatever you have it named
8: After it's done loading reboot from recovery, it will reboot twice and the screen will say as per OP
9: After phone optimizes...enjoy root.
This is for advanced users
Click to expand...
Click to collapse
Maybe I'm doing something wrong but my phone isn't recognised when trying to flash twrp from the dead bot before recovery? Just says waiting for device. Already checked device manager as well
ponhei9502 said:
Maybe I'm doing something wrong but my phone isn't recognised when trying to flash twrp from the dead bot before recovery? Just says waiting for device. Already checked device manager as well
Click to expand...
Click to collapse
Guess your ZF2 is not unlocked in LP first, so that you can't see twrp booting. Since you are in Android 6.0 now, try to downgrade to LP, Unlock it, upgrade to 6.0 and then root.
samcjtsai said:
**WARNING** You need to have background knowledge of adb, fastboot, twrp, sideload.. before you can go on with this thread.
1. All credits go to @shakalaca and I just recap his threads posted in Taiwan Asus Zentalk forum. Although this is reported working in the forum, as usual, do it at your risk and I won't be able to answer your questions.
2. Android 6.0 is still not unlocked. Device will be locked once you upgrade to 6.0
3. You can downgrade to Lollipop and unlock again.
4. The following SuperSU file contains a modified boot.img. In case you receive an OTA file later, do
**REMEMBER to FLASH BACK TO STOCK Android 6.0 BOOT.IMG** before upgrading to official Android 6.0.
Root:
1. Make sure your zenfone 2 is unlocked before upgrading to Android 6.0 from Lollipop.
2. Once you are in Android 6.0, fire the following command to boot twrp. <twrp.img> is the twrp recovery file. Version 2.8.7.7 is recommended.
HTML:
fastboot boot <twrp.img>
3. adb sideload the attached SuperSu file in twrp.
4. reboot system. You will see a warning screen saying "Your device has failed Verification". Ignored it and wait for the reboot.
5. Done
Xposed:
1.Flash the attached Xposed file from twrp.
2.use Material Design Xposed Installer: link
Downgrade to Lollipop:
Refer to this and get the files from the links. Note the first commnad line is the revised one by @shakalaca and it should work.
HTML:
fastboot flash token bom-token.bin
fastboot flash ifwi ifwi_ann_a0-mofd_v1-ze551ml.bin
fastboot flash fastboot droidboot.img
fastboot flash splashscreen splashscreen_ze551ml.img
Click to expand...
Click to collapse
Where are these files again? They aren't in the zip
thanks, works great, was able to downgrade to lollipop with no problem what so ever. Install twrp, gain root again, and rockin custom roms...
I've done a lot of research on a reliable way to root my Moto X Pure Edition XT1575 and want someone to check my plan before I pursue this. I'm gonna download TWRP for Clark and superSU 2.78 and put them in the same folder and open up the command prompt in that folder. Then hook up to the PC and enter the following command "fastboot boot twrp.img" then I'm gonna replace the twrp.img with the name of the twrp file and backup to the SD. Then reboot into the bootloader again and flash twrp with fastboot "fastboot flash recovery twrp.img" then start recovery and go to reboot into recovery again to lock it in. Then I'm booting back into twrp and going to Advanced & Terminal and entering the following command "echo SYSTEMLESS=true>>/data/.superSU then back home then flash superSU 2.78.
Please correct me on everything that may be wrong. If there's a better way to root, tell me how to do it your way.
My device info:
Moto X Pure Edition XT1575 (clark)
Build# MPH24.49-18
Kernel version 3.10.84
Android version 6.0
Bootloader OxAo48
Sent from my Moto X Pure Edition
ElectroJoe said:
I've done a lot of research on a reliable way to root my Moto X Pure Edition XT1575 and want someone to check my plan before I pursue this. I'm gonna download TWRP for Clark and superSU 2.78 and put them in the same folder and open up the command prompt in that folder. Then hook up to the PC and enter the following command "fastboot boot twrp.img" then I'm gonna replace the twrp.img with the name of the twrp file and backup to the SD. Then reboot into the bootloader again and flash twrp with fastboot "fastboot flash recovery twrp.img" then start recovery and go to reboot into recovery again to lock it in. Then I'm booting back into twrp and going to Advanced & Terminal and entering the following command "echo SYSTEMLESS=true>>/data/.superSU then back home then flash superSU 2.78.
Please correct me on everything that may be wrong. If there's a better way to root, tell me how to do it your way.
My device info:
Moto X Pure Edition XT1575 (clark)
Build# MPH24.49-18
Kernel version 3.10.84
Android version 6.0
Bootloader OxAo48
Sent from my Moto X Pure Edition
Click to expand...
Click to collapse
You've researched well. Couple things: The command is "echo SYSTEMLESS=true>>/data/.supersu", you added capitols on supersu. Next your first command of "fastboot boot twrp.img (or whatever you rename the TWRP recovery image to)" will live boot TWRP, which for our device is not necessary. Live booting is essentially booting into a custom recovery environment without actually installing the recovery. This is useful for devices that DO NOT have factory images available, which allows you to make a backup in the live environment prior to altering your device. We have factory images and factory recovery images, so you can skip this step and go right into "fastboot flash recovery twrp.img (or again, whatever you rename the recovery image to). Then after the recovery flash from within fastboot, you must reboot into recovery using the button select options within fastboot or your recovery will be overwritten by the stock recovery. Upon first boot of TWRP you'll have an option to keep your device read only or read/write. I personally choose NOT to keep it read only, rather read/write, because I don't care about taking OTA's with a custom recovery, but this is up to you. Then you'll want the supersu.zip on your device already (you want the regular standard current version, not a modded one from here: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703), either on your internal or external sd. And yes, prior to flashing supersu enter the command in TWRP without quotes "echo SYSTEMLESS=true>>/data/.supersu" (this prevents the bootloop that our device gets when flashing supersu in systemless mode). And your good to go. I just did this a few weeks ago from clean fastboot flashing the latest factory image, works perfectly.
Now for some clarity, I'd like someone else to chime in on the TWRP command "echo SYSTEMLESS=true>>/data/.supersu" that has to be entered. I know for sure entering the command prior works, and roots properly, but I have also read that the latest 2.78 version of supersu does not require this. I'd really like someone that KNOWS FOR SURE (no opinions) if this step can now be bi-passed, or if our device requires and will always require this step now and in the future. This will help solve a ton of questions about this issue that are spread throughout the forums so users don't have to dig to get a simple answer.
Thanks for taking the time to educate me on this. I'm gonna give it a try in a few minutes. Will I be a developer if I get it right? Hahaha I'll let you know how it goes
Sent from my Moto X Pure Edition
annoyingduck said:
You've researched well. Couple things: The command is "echo SYSTEMLESS=true>>/data/.supersu", you added capitols on supersu. Next your first command of "fastboot boot twrp.img (or whatever you rename the TWRP recovery image to)" will live boot TWRP, which for our device is not necessary. Live booting is essentially booting into a custom recovery environment without actually installing the recovery. This is useful for devices that DO NOT have factory images available, which allows you to make a backup in the live environment prior to altering your device. We have factory images and factory recovery images, so you can skip this step and go right into "fastboot flash recovery twrp.img (or again, whatever you rename the recovery image to). Then after the recovery flash from within fastboot, you must reboot into recovery using the button select options within fastboot or your recovery will be overwritten by the stock recovery. Upon first boot of TWRP you'll have an option to keep your device read only or read/write. I personally choose NOT to keep it read only, rather read/write, because I don't care about taking OTA's with a custom recovery, but this is up to you. Then you'll want the supersu.zip on your device already (you want the regular standard current version, not a modded one from here: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703), either on your internal or external sd. And yes, prior to flashing supersu enter the command in TWRP without quotes "echo SYSTEMLESS=true>>/data/.supersu" (this prevents the bootloop that our device gets when flashing supersu in systemless mode). And your good to go. I just did this a few weeks ago from clean fastboot flashing the latest factory image, works perfectly.
Now for some clarity, I'd like someone else to chime in on the TWRP command "echo SYSTEMLESS=true>>/data/.supersu" that has to be entered. I know for sure entering the command prior works, and roots properly, but I have also read that the latest 2.78 version of supersu does not require this. I'd really like someone that KNOWS FOR SURE (no opinions) if this step can now be bi-passed, or if our device requires and will always require this step now and in the future. This will help solve a ton of questions about this issue that are spread throughout the forums so users don't have to dig to get a simple answer.
Click to expand...
Click to collapse
It worked! I'm rooted and looking for a stable rom with a lot of features and customizations that works with Verizon LTE. I also want viper4android. I'm glad I backed up because I tried flashing a viper4android zip and it caused my phone not to boot. It just sat at the unlocked bootloader warning so I just restored it. Evidently, I was supposed to unzip the file in esfile Explorer and install the apk. I think I also needed the selinux mode changer app.
What would I gain by installing a custom Kernel to my rooted stock rom? Can I even do that?
Sent from my XT1575 using Tapatalk
ElectroJoe said:
It worked! I'm rooted and looking for a stable rom with a lot of features and customizations that works with Verizon LTE. I also want viper4android. I'm glad I backed up because I tried flashing a viper4android zip and it caused my phone not to boot. It just sat at the unlocked bootloader warning so I just restored it. Evidently, I was supposed to unzip the file in esfile Explorer and install the apk. I think I also needed the selinux mode changer app.
What would I gain by installing a custom Kernel to my rooted stock rom? Can I even do that?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Flash ViPER4Android from here, no SELinux changing app needed: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
As for custom kernel, Frankenclark. Features available is in the post: http://forum.xda-developers.com/moto-x-style/development/kernel-frankenclark-t3289939
annoyingduck said:
Now for some clarity, I'd like someone else to chime in on the TWRP command "echo SYSTEMLESS=true>>/data/.supersu" that has to be entered. I know for sure entering the command prior works, and roots properly, but I have also read that the latest 2.78 version of supersu does not require this. I'd really like someone that KNOWS FOR SURE (no opinions) if this step can now be bi-passed, or if our device requires and will always require this step now and in the future. This will help solve a ton of questions about this issue that are spread throughout the forums so users don't have to dig to get a simple answer.
Click to expand...
Click to collapse
I literally did this to a fresh MXPE two weeks ago... misspelled the filename so it wasn't recognized (it isn't supersy apparently), and flashed SuperSU 2.78-SR1, rebooted and stuck at boot logo for 20 minutes. Rebooted into TWRP and entered the correct echo command to create the .supersu file and reboot, it looped twice quickly and then went to the lockscreen after a 2-3 minutes.
Introduction
Hello everyone, this is a guide to assist you with customizing your Pixel 2! I will be going over installing fastboot and adb, unlocking your bootloader, how to flash the factory images for clean flashes and upgrades, and how to root. Please feel free to ask any questions if you need clarification. Enjoy!
This information has been distilled from Google's official factory image site and the Magisk thread.
Installing fastboot and adb
Thankfully, Google has provided just adb, fastboot, and systrace as a simple zip file, making this process super easy. You MUST be on at LEAST 26.0.2 for the commands in this guide to work. When in doubt, grab the latest copy and install them using the following instructions.
SDK Platform-Tools for Windows
SDK Platform-Tools for Mac
SDK Platform-Tools for Linux
Windows:
Unzip the folder somewhere on your hard drive.
Go to the folder containing the adb and fastboot files and type "cmd" in the path bar at the top.
A command prompt should open with the current folder showing on the prompt.
Type the following commands:
Code:
adb --version
fastboot --version
You should see some information appear. If that is the case, you were successful!
Mac/Linux:
Unzip the folder somewhere on your hard drive.
Navigate to that folder with your terminal.
Run the following commands:
Code:
sudo install adb dmtracedump e2fsdroid etc1tool fastboot hprof-conv make_f2fs mke2fs mke2fs.conf sload_f2fs sqlite3 /usr/local/bin
sudo mkdir -p /usr/local/lib64
sudo install lib64/libc++.so /usr/local/lib64
Type the following commands:
Code:
adb --version
fastboot --version
You should see the version information, along with telling you they are installed to /usr/local/bin. If so, you were successful!
Unlocking the bootloader
WARNING: This WILL wipe your entire phone. Please make copies or backups of any important data. This can also go wrong rendering your device inoperable. Proceed with caution.
On your phone, open Settings, navigate to "System" then "About phone", and tap on the build number 7 times.
Go one menu up, click on "Developer options", and turn on USB debugging and OEM unlocking.
In your terminal, type the following command:
Code:
adb reboot bootloader
Run the following command:
Code:
fastboot flashing unlock
Follow the prompts on your device then reboot!
Flashing factory images
NOTE #1: You CANNOT downgrade factory images. Google has prevented users from doing so to keep them safe from vulernabilities that were patched. You should only upgrade or reinstall the current image.
NOTE #2: If you have mounted /system as rw at any point (like in TWRP), you must upgrade using the factory image method. OTAs will fail because they cannot verify the integrity of the disk since its verity data has been changed.
NOTE #3: Flashing the factory images requires an unlocked bootloader. Flashing the OTA zips does not (but if anything goes wrong, you may not be able to recover without an RMA).
Updating to a new release (factory image):
Download the latest factory image from Google's website.
Reboot into the bootloader:
Code:
adb reboot bootloader
Unzip the factory image.
Inside you will see a bootloader image, a radio image, an image zip file, and a couple of flash scripts.
If you are on Windows, open the "flash-all.bat" file in a text editor. If you are on Mac or Linux, open the "flash-all.sh" instead.
Remove the "-w" flag before the fastboot command towards the end of the file. This will prevent fastboot from formatting your device.
Run the flash all script! Open a command prompt, navigate to the folder with the script, and run one of the following commands:
Windows:
Code:
flash-all
Mac/Linux:
Code:
./flash-all.sh
Reboot once it is finished!
Updating to a new release (OTA zip):
Download the latest OTA zip from Google's website
Reboot into recovery:
Code:
adb reboot recovery
Hold down the power button and push volume up
Select "Apply update from ADB"
Run the following command from the folder containing the OTA zip:
Code:
adb sideload <zip_name>.zip
Reboot once it is finished!
Clean flashing a factory image (wipe everything):
Download the latest factory image from Google's website
Reboot into the bootloader:
Code:
adb reboot bootloader
Unzip the factory image.
Run the flash all script! Open a command prompt, navigate to the folder with the script, and run one of the following commands:
Windows:
Code:
flash-all
Mac/Linux:
Code:
./flash-all.sh
Reboot once it is finished!
Rooting with Magisk
NOTE #4: This section assumes you are not going to install TWRP. If you are, skip to the next section and just flash the latest Magisk zip after installing TWRP.
Download the Magisk zip from the official thread and install the manager from the zip.
Grab a boot image to patch (either the one from the latest factory image or a custom kernel one) and push it to your device:
Code:
adb push <path_to_file> /sdcard/Download
Open Magisk Manager and click the Install button.
Click "Install" at the first prompt then choose "Patch Boot Image File". A file manager will pop up.
Select the boot image you want to patch and let Magisk Manager patch it.
Pull it off your device:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
Reboot into the bootloader:
Code:
adb reboot bootloader
Flash the boot image and reboot.
Code:
fastboot flash boot patched_boot.img
fastboot reboot
Open Magisk Manager and you should be rooted!
Installing TWRP
NOTE #5: If you just want to temporarily boot TWRP to flash Magisk and your custom kernel, you can just skip flashing the installer zip in this process.
NOTE #6: TWRP can be unstable at times given the way that security has been set up on this device (lack of decryption, failing to boot, etc).
Download both the TWRP image and zip installer from the official site.
Temporarily boot the TWRP image.
Code:
fastboot boot <path_to_twrp_image>
Flash the TWRP installer zip.
Reinstall Magisk and your custom kernel if you had them.
Reboot and profit!
Common issues
Outdated fastboot/adb: This device requires the latest fastboot and adb binaries to work properly. A lot of common quick adb/fastboot installation guides link to installers that are old. Please manually install the latest using the information at the beginning of the thread!
Using a USB-3.0 or USB-C port: Some newer USB ports do not work with fastboot. Issues manifest as weird errors during a flash. Use a different USB cable/port.
Closing statements
If there are any procedures you would like to see added (like flashing a custom kernel or booting TWRP), I am happy to add them if requested. Also, when requesting help, please be as specific as possible where you get confused. I want this guide to be clear as possible.
Reserved
Reserved
Stuck on this step
Run the flash all script! Open a command prompt, navigate to the folder with the script, and run one of the following commands:
How do I navigate in command prompt? When I typed flash-all, it said it is not a internal command etc. When I dragged and dropped flash-all into the command prompt, it said C:\Users\W Balls\Downloads\SAMPWND_SYSTEMROOT_ADB_FILES>"C:\Users\****** Jim\Downloads\walleye-opd1.170816.025-factory-4752baae\walleye-opd1.170816.025\flash-all.bat"
error: cannot load 'bootloader-walleye-mw8998-002.0059.00.img'
rebooting into bootloader...
OKAY [ 0.004s]
finished. total time: 0.004s
error: cannot load 'radio-walleye-g8998-00122-1708311414.img'
rebooting into bootloader...
OKAY [ 0.010s]
finished. total time: 0.015s
W/ ( 6448): Unable to open 'image-walleye-opd1.170816.025.zip': No such file or directory
error: failed to open zip file 'image-walleye-opd1.170816.025.zip': I/O Error
Press any key to exit...
You are calling the flash-all.bat out of a differende directory (C:\Users\W Balls\Downloads\SAMPWND_SYSTEMROOT_ADB_FILES) therefore it can't find the system image files since they are located under C:\U sers\****** Jim\Downloads\walleye-opd1.170816.025-factory-4752baae\walleye-opd1.170816.025. Make sure you extract your image to that directory, open up a command promt and navigate to it with "cd C:\Users\W Balls\Downloads\SAMPWND_SYSTEMROOT_ADB_FILES" and call the flash-all.bat from there.
Check out this for basic command line stuff https://www.digitalcitizen.life/command-prompt-how-use-basic-commands
---------- Post added at 10:58 AM ---------- Previous post was at 10:56 AM ----------
I tried this and it seems the magisk manager isn't able to download magisk on its own at least on my device:
Code:
DownloadManager: [356] Stop requested with status HTTP_DATA_ERROR: Unable to resolve host "forum.xda-developers.com": No address associated with hostname
DownloadManager: [356] Finished with status WAITING_TO_RETRY
EDIT: Seems like DNS66 was blocking the download patching was scucessfull now.
This is weird, can't I make 2 posts in a row??
Anybody figure out a solution for flashing when on MacOs High Sierra? Platform tools 26.0 1 was a fix for high Sierra, yet 26.0.2 seemed to have lost that commit, so fastboot doesn't work at all. Wondering if it's safe to use 26.0.1 on the pixel 2
nathanchance said:
Flashing factory images
Click to expand...
Click to collapse
First, thanks for putting this together. I've rooted using your method.
Regarding OTA updates: I've read that if we've rooted, we will need to un-root before we can receive an OTA update. Is this always true, or only if we've installed a custom recovery like TWRP? It would be really handy to have a guide on how to un-root, update, then re-root.
Related - let's say that for whatever reason, we have to flash an OTA update manually, rather than actually getting it OTA. Do we lose root by doing so?
Thanks!
JayBlack_686 said:
First, thanks for putting this together. I've rooted using your method.
Regarding OTA updates: I've read that if we've rooted, we will need to un-root before we can receive an OTA update. Is this always true, or only if we've installed a custom recovery like TWRP? It would be really handy to have a guide on how to un-root, update, then re-root.
Related - let's say that for whatever reason, we have to flash an OTA update manually, rather than actually getting it OTA. Do we lose root by doing so?
Thanks!
Click to expand...
Click to collapse
Magisk's OTA section should clear up some of your doubts: https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
nathanchance said:
Magisk's OTA section should clear up some of your doubts: https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
Click to expand...
Click to collapse
Looks really straightforward, thank you! Might be cool to point to it in the OP. I bet I'm not the only one who was only vaguely aware of the impact that rooting has on how we get OTAs. Then again, maybe everyone else wants to run custom ROMs.
JayBlack_686 said:
Looks really straightforward, thank you! Might be cool to point to it in the OP. I bet I'm not the only one who was only vaguely aware of the impact that rooting has on how we get OTAs. Then again, maybe everyone else wants to run custom ROMs.
Click to expand...
Click to collapse
Good point, I'll add it here in a bit
Sent from my Pixel 2 XL using XDA Labs
OTA vs factory image
Howdy,
really appreciate @nathanchance for putting this together. Would you mind adding a few lines about the differences between OTA and factory images. As a layman i haven't got the foggiest idea which route to go and would appreciate some wisdom. Thanks!
Thank you so much for this guide but can anybody please explain how you can tell which image to patch ?
I am unable to get this to work magisk is showing this message: stock kernel cannot be patched please use a custom kernel
i downloaded: walleye-opd1.170816.010-factory-63083164.zip
unsure as to whether this is correct for my phone as they are quite a few and its unclear how to tell
i have a pixel 2 from the UK that was factory unlocked and i unlocked the boot loader
what am i doing wrong please help
tango650 said:
Howdy,
really appreciate @nathanchance for putting this together. Would you mind adding a few lines about the differences between OTA and factory images. As a layman i haven't got the foggiest idea which route to go and would appreciate some wisdom. Thanks!
Click to expand...
Click to collapse
The primary difference is that the OTA can be flashed on an unlocked bootloader and is designed not to wipe your phone.
UpGrad3 said:
Thank you so much for this guide but can anybody please explain how you can tell which image to patch ?
I am unable to get this to work magisk is showing this message: stock kernel cannot be patched please use a custom kernel
i downloaded: walleye-opd1.170816.010-factory-63083164.zip
unsure as to whether this is correct for my phone as they are quite a few and its unclear how to tell
i have a pixel 2 from the UK that was factory unlocked and i unlocked the boot loader
what am i doing wrong please help
Click to expand...
Click to collapse
Are you supplying the boot image to Magisk? Show me a screenshot of what Magisk says when it tries to patch.
Thanks @nathanchance for this. I'm not a technical person, but can follow directions. This is the 4th phone that I've rooted following directions of some very smart and talented people here on XDA. I don't do this kind of thing everyday, and am not up on programming or coding or whatever you guys call it now days.
All I ended up doing is taking the OTA from Google to the .025. Then followed the Magisk rooting instructions to get root. I had Unlocked it the first day I turned the phone on, I haven't put my SIM in yet, but will play around with it a little more, and finish setting it up,
Again, thanks for the GUIDE to this Pixel 2 phone.
nathanchance said:
The primary difference is that the OTA can be flashed on an unlocked bootloader and is designed not to wipe your phone.
Are you supplying the boot image to Magisk? Show me a screenshot of what Magisk says when it tries to patch.
Click to expand...
Click to collapse
That is what i get. I have even flashed the whole factory image to the phone and still get this
@UpGrad3 you need to extract the boot.img out of your zip (walleye-opd1.170816.010-factory-63083164.zip) file and process this one, I'll guess you tried with the whole zip?? Also you can "attach" pictures to the post and not include the full res with the image tags...
@drmason I did extract the img from the zip. I followed the instructions exactly which is why im so confused as to what is going on ? Ok sorry i will do in future.
Amended post
UpGrad3 said:
@drmason I did extract the img from the zip. I followed the instructions exactly which is why im so confused as to what is going on ? Ok sorry i will do in future.
Amended post
Click to expand...
Click to collapse
You got the boot.img from the zip file that was inside the zip file?
from https://forum.xda-developers.com/showpost.php?p=74429474&postcount=90
Step by step
1. Download and extract factory image. Mine was taimen-opd1.170816.010-factory-c796ddb4.zip
***2. Once extracted go into the folder and extract image-taimen-opd1.170816.010.zip.
There you will find the boot.img.
---------- Post added at 08:36 AM ---------- Previous post was at 08:27 AM ----------
nathanchance said:
Good point, I'll add it here in a bit
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
@nathanchance, one more suggestion for the OP: at one point I was looking at using the stock boot img and couldn't figure out how to get it. Later, I found the below post, where the first two steps are essentially "open the zip inside the zip for the boot.img" to extract the stock boot image. Maybe it's really obvious, but I didn't get it.
https://forum.xda-developers.com/showpost.php?p=74429474&postcount=90
@UpGrad3 you are using the latest Magisk Manager 5.4.1 for this?
JayBlack_686 said:
You got the boot.img from the zip file that was inside the zip file?
from https://forum.xda-developers.com/showpost.php?p=74429474&postcount=90
Step by step
1. Download and extract factory image. Mine was taimen-opd1.170816.010-factory-c796ddb4.zip
***2. Once extracted go into the folder and extract image-taimen-opd1.170816.010.zip.
There you will find the boot.img.
---------- Post added at 08:36 AM ---------- Previous post was at 08:27 AM ----------
this is where i was going wrong i was using a file that had bootloader in the name rather than going into the second zip and finding boot
@nathanchance, one more suggestion for the OP: at one point I was looking at using the stock boot img and couldn't figure out how to get it. Later, I found the below post, where the first two steps are essentially "open the zip inside the zip for the boot.img" to extract the stock boot image. Maybe it's really obvious, but I didn't get it.
https://forum.xda-developers.com/showpost.php?p=74429474&postcount=90
Click to expand...
Click to collapse
drmason said:
@UpGrad3 you are using the latest Magisk Manager 5.4.1 for this?
Click to expand...
Click to collapse
yes i was
although im now stuck on the bootscreen with the G any suggestions ?
Fixed.
incase it happens to anyone else. i restored the factory image again then started the root procedure. im now rooted and fully working
I am following this guide here to root oneplus 6t (european variant), 9.0.5 Android:
https://www.xda-developers.com/onepl...otloader-root/
bootloader is unlocked and I can see there is a positive connection between phone and PC by checking the output on adb devices and fastboot devices. both work as intended.
the problem is that when I try to adb sideload, it says that I need version 1.0.32. so this means I cannot flash the custom recovery.
any tips? been looking online for quite some time now and cannot figure out what to do anymore. where can I find this 1.0.32 adb version?
I am a long time user on nexus 5 and just bought this phone, want to root it aswell. (note: this does not mean I have high level of knowledge on these types of hacks, just wanted to have this clear.)
Are you trying to boot or to flash the recovery from adb ? If you're trying to install the recovery from adb it wont work, on a/b devices the recovery is part of the boot image wich needs to be patched, boot twrp.img and then get the bluespark twrp zip and flash it.
nikexv2 said:
Are you trying to boot or to flash the recovery from adb ? If you're trying to install the recovery from adb it wont work, on a/b devices the recovery is part of the boot image wich needs to be patched, boot twrp.img and then get the bluespark twrp zip and flash it.
Click to expand...
Click to collapse
I can start the twrp, the problem is when I go into adb sideload and try to flash it. on pc is says "error" and on the phone it says I need to get adb 1.0.32. I am trying to flash that bluespark recovery with no luck.
cesar.maranhao said:
I can start the twrp, the problem is when I go into adb sideload and try to flash it. on pc is says "error" and on the phone it says I need to get adb 1.0.32. I am trying to flash that bluespark recovery with no luck.
Click to expand...
Click to collapse
You need to flash the zip from within the recovery that you booted using adb, not sideload it.
I already tried that, copied the files to the phone but when I try to access them through the bootable trwp, I cannot access them.
cesar.maranhao said:
I already tried that, copied the files to the phone but when I try to access them through the bootable trwp, I cannot access them.
Click to expand...
Click to collapse
wrong twrp used. you correct twrp and it will work. like this twrp https://forum.xda-developers.com/on...covery-theme-blacked-twrp-acuicultor-t3847752 or https://forum.xda-developers.com/devdb/project/?id=27466#downloads the choice is yours alone to make.
you are asking for help with 6t in the 6 form. whats wrong with this? you should be at this link https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482