Database Users

Need Help for TOMTOM 5.1 on my Jasjar

I just follow the setp from
http://forum.xda-developers.com/viewtopic.php?t=28386
to install TOMTOM 5.1 after set everything up, After selecting the Voice, my TOMTOM said " NO Maps Founds!" but my there is a MAP in my SD card ( works find on my XDA II).
What should I do Now
Thx in Advance!

Check if you map has the correct name!
if you got an original version of Tomtom then you can install your map (From the setup) to you pc and then copy the correct map to your memorycard (SD or CF) and the it will recognise the map.

I have re-install my UK Map from the original TOMTOM CD, but the Jasjar still can't said " No MAP Found!!"

i had the same problem
i resolve the problem in this way:
1 put the directory map on the root directory of your storage card
2 use the correct name for your map directory ( i use Italia-Map )
ciao

Try forcing the selection of a map by adding a file called CurrentMap.dat and putting it in the following folder on your device:
Code:
\My Documents\TomTom\CurrentMap.dat
The file should contain the following line:
Code:
& \Storage Card\Italia-Map\
or whatever the exact path of your map folder is. Don't forget the ending backslash.

Co-Pilot 6 How to re-create your SD installation Card

These instructions may come in handy if you mess up your SD card.
NOTE: I found that I didn't have the CPPOCKETPC file they reffered to and where they state there are five options I only had four.
ON POCKET PC
1. Firstly, remove CoPilot from the Pocket PC by doing the following:
- On the welcome screen, click START > SETTINGS > SYSTEM > REMOVE PROGRAMS
- Remove "POCKET SPEECH" and COPILOT POCKET PC".
- Then close the window down by hitting the "X" on the top right hand side of the screen.
- Once this is complete. Click START > PROGRAMS > FILE EXPLORER, (Directly below the heading file explorer, it should say "MY DEVICE". If not click on the triangle next to the heading name. A menu should pop up which should say "MY DEVICE" on it. Please tap on the word and it will display the files which are contained in MY DEVICE.
- Click on the windows folder and it should bring up the list of the folders inside the Windows folder. Scroll down the list and locate a file called "CPPOCKETPC? (? Is the Copilot version number). Once you have located the file, tap and hold on the file name to reveal a sub-menu which should say: CUT, COPY, RENAME, DELETE. Click on DELETE, this will remove the file from this folder. Now exit File Explorer so you are taken back to the welcome screen.
ON PC & POCKET PC
2. Launch CoPilot on your desktop and then:
- Click on the data download wizard icon on the left hand side of the screen
- A window appears saying that there is no pocket PC device connected to your PC. Please select a drive to download the information.
- Select the C drive and then click next.
- Next screen will contain 5 options. Click on the option which says "REGION".
- Tick next to UK and then click "next"
- A message should appear, click OK
- Now on the top left hand side of the screen, a small window will appear saying the size required for map. (Check that required Memory is 87.0mb). If so click "next"
- Another window will appear asking you to label the data. It should already be labeled "REGIONUK". If the is correct, click "NEXT"
- You will now return back to the option screen with 5 buttons. Now click on DOWNLOAD. Another menu will appear: ensure that RegionUK is on the right hand side box and then click DOWNLOAD
- Select the operating system you are using on your Pocket PC and ensure the Speech it set to MALE TTS, then hit OK.
- This will start creating the data required for your Pocket PC. It may take a couple of minutes to do this.
- Once this is complete, hit the finish button. This means the download is complete.
3. Now connect your Pocket PC to your Desktop PC
- Click on MY COMPUTER and click on the C drive.
- Inside this drive you should have two folders called "2577" & "CoPilot". Once you have located these folders, select them both, right click and select COPY.
- Now go back to MY COMPUTER, open MOBILE DEVICE > MY POCKET PC > STORAGE CARD.
- DELETE ALL FILES in the STORAGE CARD (Ensure that the folder is completely empty before proceeding)
- Click inside the STORAGE CARD folder.
Right click in this folder and select Paste. This will copy the information onto your Storage card.
- Once this is completed disconnect your Pocket PC, take out the storage card and reinsert it.
- This should give you the installation window. Now follow the instructions on the screen to activate Copilot.

hey meaty!
cant' i just copy the files from the colipot install SD to desktop then copy them to new storage card?
maybe im being duumb here , ,??
cheers,
lr

I've never tried but a support guy gave me the very same instructions -so I guess not if you want the map data set configured

I found the easiest way was using the desktop data wizard to create all the map and installation files on an sd card using an sd card reader (much quicker). I have the europe map version and ended up putting the whole lot (complete maps europe maps etc) on a 2gb card. It used around 900mb. The program is installed to the sd card. The desktop program takes some time to compile the complete europe map data but now it all works just fine. I have of course copied the contents of the sd card to a backup file on the pc.
It is almost certainly possible to copy the original files from the sd card supplied to another sd card and then get the desktop program to download just the map data. (I have run both CP 5 and 6 from copies).
I have re-installed both CP 5 and 6 several times to both the jasjar and the sd card - without difficulty. The instructions given by ALK seem uncessarily complicated.

little_rock said:
hey meaty!
cant' i just copy the files from the colipot install SD to desktop then copy them to new storage card?
maybe im being duumb here , ,??
cheers,
lr
Click to expand...
Click to collapse
Yes you can but I managed somehow to trash my files and this was the way that ALK instructed me to re-create your installation files.
It is a bit long winded but it works!

y is nothing ever blooming straightforward!!!
these gadgets are lucky we love 'em!

Hmmm . . quite a few files on the SD . . anyone know what ones I need?

How to install TomTom for dummies please?

Hi
just got my XDA Mini S.
I have also bought a Holux GPSlim236 bluetooth GPS reciever.
I have NOT got a miniSD card... do I need one???
I have downloaded tomtom_5.21_wm2005_ppc_+crack with these files in the folder on my PC:
gps.cab
PIMAddIn.cab
ttn.cab
voice12.cab
wzd.cab
(FOLDER) crack with:
TomTom Navigator.exe
(FOLDER) TomTom with:
CurrentMap.dat
Is there any chance someone can write a install TomTom guide *for dummies* in real laymans terms?

Due to the amount of space required to by TomTom there is no way you're going to be able to install it on your device without extra space - eg miniSD card. They're reasonably cheap, compared to a few years ago, and you can get a 2Gb on eBay for about £35 to £40 or around half that if you just want to get a 1Gb card, which will be more than enough for TomTom.
Once you've done that, read this...
http://forum.xda-developers.com/viewtopic.php?t=29277

Right I'll pop out to Aria and get a miniSD

I read that link as well and it's very confusing...
I just want basic steps for an install to get tomtom sat nav working.

I had the same problem before and I ran across this article:
http://www.4winmobile.com/q-how-can-i-install-tomtom-navigator-5-on-wm5-devices-vt934.html
Probably it will help you in installing it correctly.
You definitely need to have mini SD card for this app.
DulYang

Not got the miniSD card yet but read the guide and am still not sure what to do.
Take your version 5 Application/Resource CD (probably CD1 or 6) and copy the contents of the CD to a folder on your desktop.
Download the latest update from TomTom currently v5.21 (28-12-05).
I have got 5.21 but it's not on CD
Copy the files that you just extracted to the folder on your desktop that contains the CD files and overwrite the existing “setup.exe” with the new one.
I have not extracted anything, and I don't have a file called setup.exe
Execute “setup.exe” and follow the instructions to install.
Now copy the next CD to a folder on your hard drive (EG:The map cd).
No CD
Follow steps 3 to 5
Keep repeating this process for all your CD’s, Maps, Voices, Post Codes.
do I need map files or do I have them???
Now most of the stuff (apart from maps & post codes) were installed in the main memory of my o2 XDA Exec even though I explicitly stated in the install to put them on the SD Card.
I rectified this by performing the following:
do I need to do any of this?
Create a folder on the SD Card called “TomTom”.
Cut the files from the folder “Navigator” which is in main memory under “\Program Files”.
These files are “TomTom Navigator.exe” & “data.chk”.
Paste these files into the folder “\Storage Card\TomTom”.
PLEASE NOTE:
Without the presence of a TomTom folder here the full postcode lookup, voices and schemes will fail if you move them to the Storage Card.
& Don’t forget to change the path of the shortcut under Start>Programs
You can use a 3rd party explorer like Resco Explorer for this
You can delete the “Navigator” folder from main memory now.
Create a folder called “voices” in the root of SD Card.
IE: “\Storage Card\voices”.
Cut the files inside “\My Documents\tomtom” which is in main memory, these files are the English UK voices. (You may have more).
“data04.chk”, “data04.vif”, “data05.chk” & “data05.vif”.
Created a folder called “schemes” in the root of SD Card.
IE: “\Storage Card\schemes”.
This is where I put all my downloaded schemes & the ones I created.
PLEASE NOTE:
If you are using a custom scheme don’t be alarmed when you load TomTom and your display looks a little bland, your custom scheme will appear when you have a valid GPS signal.
In the main memory there is “\TomTom” with the following files inside it.
“_do_not_remove.txt”, “go1108m.wav”, “tttoday.bmp”, “tttoday.dll” & “tttodayvga.bmp”.
These files are for the today screen pluggin.
Apparently, although I cannot confirm, these files can be deleted if you don’t use the TomTom today pluggin.
BUT THE FOLDER MUST REMAIN!
I suppose you could use Activesynch to remove this pluggin.
If you use custom menus you will have a folder inside this “TomTom” folder called “SDKRegistry”
and inside this folder will be a file called “TomTom.mnu “
I don’t use custom menu’s so I’m assuming this must stay where it is.
Now you need to create a text file called “CurrentMap.dat”.
Open the file & type & \Storage Card\Great_Britain-Map\
or whatever the name of your main map folder is on your SD card.
Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as "CurrentMap.dat". Make sure it doesn't end up as CurrentMap.dat.txt!
Put this file in the main memory of your PPC under “\My Documents\TomTom”.
PLEASE NOTE:
Without this file TomTom will tell you that you have no maps installed!
In the main memory, under “Program Files” there is a folder called “Conatcts Navigation”
IE: “\Program Files\Contacts Navigation”.
I think this needs to stay where it is in order for the contacts <> TomTom “navigate to/find on map” integration feature to work.
(Eg. Select a contact from your address book and find them on the map/navigate to them)
At this stage you should pair your Bluetooth GPS Receiver before launching TomTom.
I have the Bluetooth GPS listed but it says COM6, does this matter?
Start>Settings>Connections>Bluetooth> Turn on bluetooth.
Turn on your Bluetooth GPS receiver.
Click on “devices” tab and then on “new Partnership”
Wait for the scan.
Select “BT GPS” (or whatever your's is called).
Click on "next" Enter passkey (mine was "0000")
Check your GPS Receiver's manual.
Click on "next"
Once properly paired, put a check next to "Serial Port" as the device's available service.
click "Finish".
Click on "COM Ports" Tab
Click "New Outgoing Port", select "BT GPS" (or whatever your's is called).
click "next".
Set COM port to "COM4", while leaving Secured Connection still checked.
If that doesn’t work, choose a different COM port.
Click "Finish" and your device should now be listed with (COM4) next to it.
Now load up TomTom.
During setup you will be asked to specify your GPS hardware.
Select "Other Bluetooth GPS" then select "COM4".
PLEASE NOTE:
In future you don’t need to enable bluetooth, just load Tom Tom and it does it for you.
PLEASE NOTE:
IF FLIGHT MODE ON YOUR PDA IS ON, YOU WILL NOT GET A GPS SIGNAL, EVEN IF BLUETOOTH IS ON!
and now all should work
Dam I'm Good!!
To summarize all this, here is my directory structure.
Is this on the XDA Mini S or his PC?
MAIN MEMORY:
\My Documents\TomTom\CurrentMap.dat, great_britain_plus-7777ac9g (This is your registration details in the format "<map name>-<letters&numbers)
\Program Files\Contacts Navigation\<20 dll files>
\TomTom\_do_not_remove.txt, go1108m.wav, tttoday.bmp, tttoday.dll & tttodayvga.bmp
\TomTom\SdkFileCalls\<empty>
STORAGE CARD:
\Storage Card\Great_Britain_Plus-Map\<map files & POI files here>
\Storage Card\Great_Britain-Map\<map files & POI files here>
\Storage Card\schemes\<custom schemes in here>
\Storage Card\TomTom\data.chk, navigator.cfg & TomTom Navigator.exe
\Storage Card\voices\blah.chk, blah.vif & blah.bmp (for custom voice files)
\Storage Card\zip\great_britain.postal (7 digit post code lookup)
Click to expand...
Click to collapse
Can anyone tell me exactly what I need to do in my scenario please with the files I listed in my first post?

JohnHamer19677 wrote:
<<
Can anyone tell me exactly what I need to do in my scenario please with the files I listed in my first post?
>>
Ok, I got it now.
You just have the files cracked from somewhere on the Internet.
In order for this guide to work, you need to have the original TomTom CD 5.0 that includes all the maps, voices etc. ( I believe it was 6 CDs altogehter)
The one that you have is just the "cracked" version of TomTom exe file without any maps to use. That's why it's just a couple of MB in size.
The latest part of the guide is showing the structure of the Wizard, not PC.
DulYang

1. Go and buy a copy of TomTom.
2. Follow the instructions.
Please do not ask for help with cracked/pirate software on this forum, it is not what we are about.

OK mate :roll:

findus said:
1. Go and buy a copy of TomTom.
2. Follow the instructions.
Please do not ask for help with cracked/pirate software on this forum, it is not what we are about.
Click to expand...
Click to collapse
Although I agree with you it would be a first on this forum!!! LOL. Just look at the FTP site! Full of illegal ROMs etc.

OK...
I have now aquired a copy of 5.21 + a 1gig mininSD card
1. I the TomTom Navigator folder onto a new miniSD card
2. Put the card into the slot on the XDA
3. Clicked tomtom navigator.e x e
4. Program starts up and a Legal Notice screen appears
5. Click I Agree
6. Comes up with Can Not Find Maps
So I copy "Great_Britain_Plus-Map" folder to the miniSD card
And I copy "Great_Britain-Map" folder to the miniSD card
Repeat steps 1-5 but then it just hangs... I need to reboot the XDA to make it work again.
Any ideas on what to try next?

Progress...
I have installed the TomTom program from the update on he TomTom site!!!
It installed to the XDA not the miniSD but not problems.
Now where do I put the maps???
and voices???

I have put Great_Britain-Map onto the miniSD card but it's saying:
No Maps Found!

JohnHamer19677 wrote:
<<
No Maps Found!
>>
You need to install the maps and voices by running the setup.exe from the CD and pick install. That way all the necessary files will be copied over to your Mini D card by the CD installer.
Then if you follow the instruction that I gave you, you would notice step 10.
Step 10 said:
Now you need to create a text file called “CurrentMap.dat”.
Open the file & type & \Storage Card\Great_Britain-Map\
or whatever the name of your main map folder is on your SD card.
Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as "CurrentMap.dat". Make sure it doesn't end up as CurrentMap.dat.txt!
Put this file in the main memory of your PPC under “\My Documents\TomTom”.
PLEASE NOTE:
Without this file TomTom will tell you that you have no maps installed!
DulYang

Right I got it to find Great_Britain_Plus-map but now it's asking me to activate

JohnHamer19677 wrote:
<<
Right I got it to find Great_Britain_Plus-map but now it's asking me to activate
>>
Now this is the time for you to replace the original exe file on your device with the cracked one that you got from the Internet.
I guarantee you it won't ask you for nothing else.
Good luck.
DulYang

Wha hey!!
Sorted now... I had to get another Great-Britain-map to get rid of the activation screen I'd already done the exe swap.
Notice the differance in the under score and dash from the one I downloaded. Don't know if that made a differance.
Now all I had to do was switch maps over to the GB-plus map and I was away.
GPSlim236 picked up my location immediatly from inside downstairs no problems.
Thanks for everyones help especially dulyang.

Ok heres another dummy that has go all the bits but hasn't a clue how to install tomtom on my wizard. (I've had them for 6 months now lol)
Now that you have sucessfully sorted yours John could you write a simple step by step instruction for others ? you will have a better idea than most where existing instructions are a bit vague or ambiguous etc.

Hi Everybody!!! :?
Where do I place my voices folder?
I have a voices folder on my storage card, in my tomtom folder , but also have a voices folder on my device in the tomtom folder there?
When Istart the program and try to change the voice, the voices are greyed out and won't let me select any of them.
Thanks for any replies
{>

peanut said:
Ok heres another dummy that has go all the bits but hasn't a clue how to install tomtom on my wizard. (I've had them for 6 months now lol)
Now that you have sucessfully sorted yours John could you write a simple step by step instruction for others ? you will have a better idea than most where existing instructions are a bit vague or ambiguous etc.
Click to expand...
Click to collapse
Hi mate,
1. 1st download 5.21 from tomtom http://www.tomtom.com/support/index.php?FID=3361&Lid=1
it's about a quater of the way down the page...
I know you prob have 5.21 but so did I and it didn't install right but the one from tomtom's site did it perfectly... IT'S FREE!!!
2. Have you XDA plugged into your PC using the lead and the Active Sync program.
3. Double click the .exe you just downloaded from tomtom
it will start running on the PC but install to the XDA... follow the on screen instructions on the PC and then follow them on the XDA.
4. Now all you have to do is put your miniSD card in your card reader and drop the maps from the PC to the miniSD card.
You might have to extract to the miniSD card if they are zipped files as extracting them to your PC then drag and dropping didn't work for me.
5. If you have a crack you need to copy the TomTom Navigator.exe out of your Crack folder and replace the one that's in > programs > navigator > on your XDA.
I used the Active Sync "explorer" to navigate to these files.
6. Once that's done just start tomtom and wait it takes a min or so to load and you should get some on scren instructions... go through these and that should be it.

Tom Tom 7.450 issue

I had this working on my diamond..but now trying on my HD..
But i keep getting 'no maps found' message? why is it?
i followed the following process which worked straight away with my diamond:
1) Copy the contents of the "SD_CARD" folder to the root of the storage card
2) Install TomTom Navigator 7 with the "TTN_7.450.9028.cab" provided
3) Start TomTom and look up your DEVICE ID from TomTom, which can be found in the file "ttnavigator.bif" on the storage card under DeviceUniqueID
4) Copy the "TTN7" folder which can be found in the "CRACK" folder the the root of drive C:
5) In the "TTN7" folder right click on "Edit, Save, Open.bat" file and click Edit
6) Where it has "XXXXX-XXXXX" enter your DEVICE ID from the "ttnavigator.bif" file
7) Save the changes to the "Edit, Save, Open.bat" file then open it
8) A file called "United_Kingdom_and_Republic_of_Ireland-14.meta.dct" should appear.
9) Copy this file to the "United_Kingdom_and_Republic_of_Ireland_v720.1802" folder which can be found on the storage card
10) Put storage card back in your PDA then run TomTom Navigator 7
Click to expand...
Click to collapse

rafter_01 said:
I had this working on my diamond..but now trying on my HD..
But i keep getting 'no maps found' message? why is it?
i followed the following process which worked straight away with my diamond:
Click to expand...
Click to collapse
Dont ask for help regarding cracked software on this forum, unless you want to be banned.

[Q] WinCE 4.2 gps device, access to windows files? (SOLVED)

Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.

Try this: http://www.austech.info/gps/84958-gps-ce-6-0-rescue-disk.html
Note: You must register with Austech to see the download link.

YESSS! Success!
Thank you very much! This is just that I needed! Followed instructions and boot in explorer (desktop), copy-back the igolaunch.exe to it's original location and everything working again! Thanks again!

snebojsa said:
Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.
Click to expand...
Click to collapse
Ive a Clarion NICE 7 GPS system with WinCE NET 4.2 core. Its running on their software. It have no menu,no taskbar,nothin ,but It have a USB port and no SD card slot. I need help with this , help me. I need help to get access to win files and folders. And is there any way to flash/crack/hack/root this device to Win CE 6 or something?:crying:

Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.

snebojsa said:
Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.
Click to expand...
Click to collapse
Hey,
i didnt find any link to the software u r talking about. where to find it?
and if it didnt work, any other method to install WinCE 6 or android to this device(running CE 4.2) ?
plz help:crying::crying:

Go to the link he posted, register on site and you will see the link.

snebojsa said:
Go to the link he posted, register on site and you will see the link.
Click to expand...
Click to collapse
This is how my menu displays and i want to change it into CE6 ! but the software (in link) is not working
need help :crying::crying:

First you wrote that you need help to get access to win files and folders, that software enable you to do that.
If you want to change appearance and gps software that device is using, you need to unlock device. There is a lot of tutorials how to do that, just google it. For example, you can try this:
http://gpsunderground.com/forum/other-device-unlock/5844-how-unlock-any-gps-wce-4-2-5-6-a.html

Help
hey,
now i got a china gps (MSUR S430) , and i think the software was deleted. i dont know. its showing
"The storage flash has no invalid data,
now formate it and program it through SD/MMC card
...........................................................................
...........................................................................
...........................................................................
detecting SD/MMC card.... not found "
Only showing this. after inserting blank SD/MMC its showing MSUR and stuck at that .Is there any way to reset it or insert a new software?
this is my only device i have.
please help. need help

MSUR S430
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.

jwoegerbauer said:
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.
Click to expand...
Click to collapse
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply

bellu1911 said:
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply
Click to expand...
Click to collapse
I suggest you ask them directly your questions: http://www.msur.com.cn/zh-cn/feedback.asp

Is there any chance that i can boot wince 4.2 or 5 in this device? Looks like its bricked. Is itpossible to installcustom firmware like miopocket or tomtom or navigator etc? Or just plain win CE ?