Database Users

ESNkit by tatotato for 6700/Apache: change ESN, NAM, SPC, etc.

For about a year I have looked for a way to read and write NAM data from HTC CDMA phones.
Today I finished my search and have put together a kit for doing the above stuff, at least for the Apache/6700. It includes all the drivers and a very nice program to hack around with your phone (CDMA Workshop).
You guys have helped me out SO much in the past, so I'd like to give something back.
So without further ado, here are the instructions.
1. Remove all drivers from previous attempts to get it working (if any) then download the attachment and uncompress to an empty folder.
2. In ActiveSync, go File -> Connection Settings and uncheck the box labelled "Allow USB connections".
3. On your phone, go Start -> Programs -> File Explorer and browse to the Windows folder.
4. Scroll down until you find a program called DMrouter. Open it and click start.
5. Plug your Apache into cradle/cable.
6. The add new hardware wizard will come up. Do not allow it to connect to windows update. Click next and select "Install the drivers from a specific location" and browse to the drivers folder inside wherever you put the ESNkit.
7. If all goes well, another add new hardware wizard will come up. Repeat the exact same process as step 6.
8. On your computer, go Start -> Control Panel -> System -> Device Manager -> View -> Devices by Connection. Then play around until you see under a USB Root hub a USB composite device with two devices in its sub-tree. One of them will have a COM port number e.g. COM6. Write this down.
9. Go into the ESNkit folder and run cdma_wshop_loader. The password is ogmisthebest
10. CDMA workshop should load. Select port you wrote down e.g. COM6, click Connect, click Read, and you're in!
How to read SPC (Greetz to rafaelc, this is for you )
After step 10, go to the Security tab, and under the SPC section, select Universal, EFS Method in the listbox.
Click read.
Click OK in the dialog.
There will be a dialog pop up with a whole lot of dots and numbers. The first 6 Numbers after the dots end are your SPC.
If you want to change NAM data with this SPC, type it into the box and click SPC then click Send and go to the NAM tab, click read, and hack away!
How to change ESN (Proof of concept , changing to an actual ESN is illegal pretty much everywhere)
After step 10, go to the Security tab, and under the ESN section, select Universal, EFS Method in the listbox.
MAKE SURE YOU WRITE DOWN YOUR CURRENT ESN JUST IN CASE.
Click Read.
It will show your ESN!
To change, type in your new ESN and click write.
Done!
Have fun guys!!
http://clickapic.com/file/3556/esnkit-zip.html
Here is the link - with correct drivers this time!
http://www.mediafire.com/?llpenydz90l
oh and greetz to helmi_c!
You are THE MAN helmi. Without you I would have no motivation to hack around with my phone.

RS Mirror: http://rapidshare.com/files/101115120/esnkit.rar

thanks man.

Lvballer06 said:
RS Mirror: http://rapidshare.com/files/101115120/esnkit.rar
Click to expand...
Click to collapse
no drivers cdma in folder,

My silly old mistake - look for version with correct drivers above.

to program nam help
Good Friend I am of Venezuela and have a problem with my apache ppc6700 want to change minlock to him and have intetado me many form and I have not been able agradeco that can help me

file has a backdoor trojan

Confirmed
charlesnett said:
file has a backdoor trojan
Click to expand...
Click to collapse
Avast found it too!

There is no backdoor trojan, I suspect Avast may be picking up the loader for the program as a trojan. Avast is a hypochondriac program that sucks anyway
My NOD32 doesn't pick up anything.

My currently updated NOD32 AV shows :
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar
multiple threats connection terminated - quarantined Threat was detected upon access to web by the application: C:\Program Files\Mozilla Firefox\firefox.exe.
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_workshop_FULL_Cracked.exe probably a variant of Win32/Packed.Themida application
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_wshop_loader.exe probably a variant of Win32/Rbot trojan

jbeam06 said:
My currently updated NOD32 AV shows :
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar
multiple threats connection terminated - quarantined Threat was detected upon access to web by the application: C:\Program Files\Mozilla Firefox\firefox.exe.
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_workshop_FULL_Cracked.exe probably a variant of Win32/Packed.Themida application
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_wshop_loader.exe probably a variant of Win32/Rbot trojan
Click to expand...
Click to collapse
Wowee...
I think it may be detecting the loader as a virus because of the way it fiddles with the RAM. Just a guess though. Note the _probably_ a variant. It does honestly work fine.

What just happened!!!
I did everything that you said, and it restarted my computer when i opened the program!

To change the esn... does that mean i can use a phone that is on the lost list then?

bigsniperboy said:
What just happened!!!
I did everything that you said, and it restarted my computer when i opened the program!
Click to expand...
Click to collapse
Program is probably buggy, does some stuff with memory pointers to make the CDMA workshop think its registered and may have thrown something out of balance. I give you my word that to the best of my knowledge your computer will not be broken in any way.
camadot said:
To change the esn... does that mean i can use a phone that is on the lost list then?
Click to expand...
Click to collapse
Hell yes it does.
ALSO, update:
I'm looking for a full version of CDMA workshop that doesn't throw everybody's antivirus programs into paranoid spasms, will post back later with results.

I tried it again and it worked this time, but i still have the drivers from last time, how do i uninstall them? thx

went into antivirus spasm mode.
both copies i tried to download.
did you ever find a solution??
sounds like a handy piece of software i'd like to add.

Great! It looks like i'm gonna try it on my Apache..

does this work on htc hero?

abs0lut3z33r0 said:
does this work on htc hero?
Click to expand...
Click to collapse
Well the file only contains the drivers for the Apache and the ESN change program, but if you can find the Hero drivers, the program in the rar should work fine.

thank you
i cound not understand very much

Cannot Install Windows Mobile remote adapter (WMDC) Error 800F0204

I have recently installed Windows Vista on my computer and hooked up my also newly formatted PDA HTC TyTN with WM6 and as usual i cannot get them to work together, even speak. This by usb cable.
As i connected it to Vista it popped up asking me for a driver which i chose to install when Windows update said there was an update for it.
Error messages included:
This is my greeting message as soon as i start my computer and login to Vista:
http://www.premier69.com/images/stories/Capture.JPG
Installing the driver like Vista want to:
http://www.premier69.com/images/stories/Capture1.JPG
And the not so helpful error message:
http://www.premier69.com/images/stories/Capture2.JPG
If any of you would like, in order to help i can allow remote controlling of my computer.

I will offer compensation via paypal for anyone who will take the time to remote connect to my computer and fix my problem, i have been trying for a very long time now and i cant figure it out.
we can discuss level of compensation but be aware i am by no means rich.

If I understand u, try this
1- donlod Window device center from here
http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
choose for Windows Vista (32-bit) or (64-bit)
& let me know

I have already tried that, i downloaded the x64 version for my vista installation and i start the install file, the progressbar loads fully then retracts and the installations program self-closes. no messages or anything.
i am serious when i say i am really stumped by how my system is acting...

try installing WMDC in safe mode, sounds like a file permissions problem

yup i tried that too, it didn't even open the installation wizard.

Got same problem - fixed with changing registry permissions
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj

thank you
Thank you thank you thank you thank you thank youuuuuuuuuuuuuuuuuuuuuuuuuuu
i have been in this issue since 2 days,and what got me crazy after i have read your post that I'm the one who restricted the access to this registry using a domain policy(I'm a network administrator) for security reasons,but i don't know why i didn't got it @ first.
I granted my self the permission and it was able to install the drivers and letting WMDC starts.
thank youuuuuuuuuuuuu again and again and again.
ajohan said:
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj
Click to expand...
Click to collapse

I have a new HTC HD2 device and windows 7 enterprise on my laptop.
I did all, but no use
The Options, Schedule and status items in ActiveSunc are inactive.
Also when I open the ActiveSync, there is a message showed on my phone: "To synchronize your device with a desktop PC, install install synchronization software from your ....."
What can I do??????
Please help

[Best Solution] ChevronUnlocker connection issue.

Drakosha said:
Hello to all!
I think, I've finally found the reason why Chevron almost never works. After a few days of struggle, I managed to successfully unlock my HD2 three times in a row, all by the same trick.
The idea is to change the IP which Chevron emulates DURING the process of jailbreak. Here's step-by-step.
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work.
At least, it worked for me 3 times in a row, while NO other ways worked.
Best regards - Draco.
P.S. If you have firewall - disable it before doing anything.
P.P.S. Win7 from NAND + MDJ Desire HD 4.4 from SD = best phone in the world
Click to expand...
Click to collapse
I have followed other guides posted here before, but none is as reliable as this one. Flawless. (Note that Zune is not required at all during this process, WPConnect is used)
Extra precautions :
1) Make sure port 443 is not used. You can open command prompt and type netstat -aon. From there, check which ip ends with 443 and check its PID number.
Once you have acquired the PID, go to command prompt and type tskill <PID number>.
2) Close skype.
3) Turn off your antivirus / firewall.
4) Make sure that during executing WPconnect.exe you're phone should NOT in be in sleep-mode/locked.
5) Make sure your host file located in C:\Windows\system32\drivers\etc\ is not read-only.
Credits to member Drakosha.

Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.

dissa said:
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
Click to expand...
Click to collapse
WPconnect is an executable used to connect your PC to wp7 devices without having to open ZUNE.
You can find out more about it here http://forum.xda-developers.com/showthread.php?p=10609273#post10609273

I test all solution, why not these one? I will reflash WP7 and test
Thanks for the TIP !

Ok.. now I know.. but the major problem is that I have Windows Xp.. so no chance to try tha trick... :-(

As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!

birel3107 said:
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
Click to expand...
Click to collapse
Can you read what is says in the window before it closes? Usually WPconnect just opens for 2-3 seconds and after a connection is established it will close back. If it says "Connection is established" or something like that, means you're good to go.
Read the steps carefully.

Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!

or this one!

yeah, that's just the same as I get when running WPConnect.

Yes but does it solve your problem?
I post 2 screenshot;
-Compltly close Zune
-Connect the device

Here's what i did, connect the phone to PC via USB, let zune opens and sync. Then close zune. Rune WPconnect.exe. It should say "Trying to establish a connection with blablabal" then "Connection established" and it will close. Try that.

G-ThGraf said:
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
Click to expand...
Click to collapse
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.

Niglet said:
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Click to expand...
Click to collapse
No it was for help birel !
Sent from my HTC HD2 using XDA App

I made it 3 times and it works !
BIG BIG Thanks!

G-ThGraf said:
I made it 3 times and it works !
BIG BIG Thanks!
Click to expand...
Click to collapse
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).

I'm from Russia. sorry for my english. stll, not working for me, i'v done all steps, but can't unlock my hd2.

birel3107 said:
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
Click to expand...
Click to collapse
Hum, only (no lock--> set to never..)
I did, step by step what |OP| Posted !

I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.

Improve said:
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
This is the one that i use on Windows Seven 64 bits Ultimate

[Q] an some 1 make (a if ur phone dont unlock video plz)

can some 1 make a more detailed video in how to unlock my hd2 wp7...i tried the regular videoes and they dont work...i try using the written discription and either it is to complicated or i am still doing something wrong ...my zune sync pefectly i can transfe files to my phone with no prob ...but when i run chevronwp7 it fails...so can some 1 help plz and make a detail video to there instructions....
1)Instal Zune
2)Connect WP7-HD2
3)Click on the sync relationship below the picture of your LEO70
4)key in any name...i used HD7
5)Once connected, create a zune id...You can use your windows live id though
6)Goto settings ---date and time and uncheck automatic date VERY IMPORTANT
7)sync your phone...Check if port 443 is free that means no SKYPE or anything. Instal registry key in windows [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\W*indowsPhone\ProxyPorts]"DeviceReg"=dword*:000069C5
8)Put chevron installer on root of C
9)Stop any antivirus & anti spyware IMPORTANT
10)Run chevron with administrative controls
11)Make sure before running chevron that Wp7 is Screen on and not keypad locked. Make sure the white screen on zune is there clearly showing your phone model and name that you made.
12)Make sure the time and date is set correctly on the device.
13)Make sure the hosts file in isn't read only, go to this folder (windows/system32/drivers/ext) right click the "host" file, choose properties and check if the file is set to read only, then click the security tab at the top, click your user name and press edit, click your username again and tick all the boxes below so that you have full control of the file.
14)Open the host file by right clicking it and opening it with notepad and delete any lines that contain developer.
p.s ...using windows 7 on my laptop......

Try these two:
http://www.youtube.com/watch?v=QolhT5LXgGo
http://www.youtube.com/watch?v=lJrRCQxATgo
Good luck!
And if I helped please hit the thanks button!

[EXE] [1.7.5] Store OEM Changer

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Do NOT Download yet Due to BUGS!]
OEM Changer changes the OEM of the Windows Phone Store with the click of a button. You don't need to configure fiddler settings or create a proxy server. Using the proven exploit in the Windows Phone Store using a proxy server and fiddler, This application automates the process with one click of the mouse.
OEM Changer is installed using an extremely simple process that will be explained in the instructions below.
BEFORE INSTALLING:
Make sure Fiddler for .NET 2 or .NET 4 is installed. The application itself works on .NET 2 or later.
INSTALLING THIS APPLICATION:
First, you need to download the application. It can be downloaded from the below "Attachments" section.
Next, extract the .ZIP file and save the extracted file where you woild like. It can be in Program Files, Desktop, Documents, etc.
Open the .EXE contained in the file. Do not touch the config file, it will break the application.
Once the EXE is open, you have installed and ran the application. Enjoy.
Once you open the application, if you are running Version 1.7 (Latest), the application will look like this:
To begin using it, put the phone manufacturer your phone is made by in the first box. In the second box, put the OEM you would like to use. Then, click "Make Changes".
Once you change your OEM, a window will appear with a proxy and instructions. This is the proxy you will use. The window looks like this:
Next, go onto your phone and open the settings. Go into Wifi and select your primary WiFi Network until you see a screen like this:
Now, put the information shown on your computer (The IP and Port) into the IP and Port boxes on your phone. Save the proxy, close the Windows Store, and reopen the store and begin downloading apps created by other OEMs.
THINGS TO NOTE ABOUT DOWNLOADING THESE APPS:
Some of them may not support the resolution of your device's screen.
UPDATE CHANGELOG:
1.0 - IR (Initial Release)
1.5 - Fixed bug preventing the opening of the application. Added proxy support.
1.6 - Added Huawei support. Added Huawei Libraries.
1.6.5 - Replaced outdated and non-optimized code. Replaced the duplicate-copy method used to put the libraries and the macro files in their correct places. Non-duplicating cuts file size in half.
1.7 - Major Update removing the application's dependency on macros. Now, the application uses a more standard and, overall, better technique to do the same thing as done in previous versions. Also, I have reduced the file size by 4.2 MB. In addition, the UI has been remodeled to work more fluidly and is now much easier to use. Also attempted to fix IP bugs. May not work on some computers. Also, Fiddler now opens automatically and closes automatically. No work for you to do this. Now works on .NET Framework 2.0!
1.7.5 - Hotfixes, Automatic Startup Config, Progress made on IP Bug.

Works great now!!! Thank you!!!

tonbonz said:
Works great now!!! Thank you!!!
Click to expand...
Click to collapse
NP. Also note I have just updated the file with some bugfixes if you are encountering any bugs.

has someone managed to download nokia apps on ATIV S after doing this?
is there a risk for using this program?:victory:

shayx said:
has someone managed to download nokia apps on ATIV S after doing this?
is there a risk for using this program?:victory:
Click to expand...
Click to collapse
There are no risks as it is running off of your personal computer and does not connect to any servers, or really anything that could install a virus/malware to your computer. On the phone side, there are also no risks. The application spoofs the OEM-Specific applications to install like any other windows phone application. The risk is essentially the same as installing any other windows phone application.
To awnser your second question, the program will install on a ATIV S. Just set the first box to Samsung and the second to Nokia.

iPwnza said:
There are no risks as it is running off of your personal computer and does not connect to any servers, or really anything that could install a virus/malware to your computer. On the phone side, there are also no risks. The application spoofs the OEM-Specific applications to install like any other windows phone application. The risk is essentially the same as installing any other windows phone application.
To awnser your second question, the program will install on a ATIV S. Just set the first box to Samsung and the second to Nokia.
Click to expand...
Click to collapse
thank you! will try it out. sounds great.

Getting this error when starting Fiddler:
[/URL]
Uploaded with ImageShack.us[/IMG]

cevi said:
Getting this error when starting Fiddler:
[/URL]
Uploaded with ImageShack.us[/IMG]
Click to expand...
Click to collapse
Have you added any rules before installing this program? If so:
Uninstall and reinstall fiddler.
Restart fiddler, make sure it works.
Open my application and click "Clear changes". Click OK to any errors, warnings, or info boxes.
Now run the OEM changer normally and see if it works now.

Ok i`ve reinstalled Fiddler now and i`ve managed to bypass this error. Probably because first i installed Fiddler for Net.2 and then over that same installation i`ve installed the Net.4 version.(Not sure about this).Now when i put the proxy in the advanced wifi settings i get no network even it says connected.Tell me this.Do i have to first open the 8888 port in the Firewall because i`ve turn it of the both with the antivirus and still not managed to get connected.

cevi said:
Ok i`ve reinstalled Fiddler now and i`ve managed to bypass this error. Probably because first i installed Fiddler for Net.2 and then over that same installation i`ve installed the Net.4 version.(Not sure about this).Now when i put the proxy in the advanced wifi settings i get no network even it says connected.Tell me this.Do i have to first open the 8888 port in the Firewall because i`ve turn it of the both with the antivirus and still not managed to get connected.
Click to expand...
Click to collapse
I'll do some testing and see if it works with only .NET 4. Also, for your other issue. This is a known issue and is easy to fix:
If you have multiple devices or software connected that create an IP (Connected printers, the Windows Phone Emulator for example), my app will detect that IP as the one you are using. To fix, open command prompt and type "IPCONFIG". Scroll up to the top, until you see the text "Windows IP Configuration". Now look for the names of all of the network adapters. Try each one you see until you find the one that works. To try one, under that adapter name, look for "IPV4 Address". Put that into your phone.

iPwnza said:
I'll do some testing and see if it works with only .NET 4. Also, for your other issue. This is a known issue and is easy to fix:
If you have multiple devices or software connected that create an IP (Connected printers, the Windows Phone Emulator for example), my app will detect that IP as the one you are using. To fix, open command prompt and type "IPCONFIG". Scroll up to the top, until you see the text "Windows IP Configuration". Now look for the names of all of the network adapters. Try each one you see until you find the one that works. To try one, under that adapter name, look for "IPV4 Address". Put that into your phone.
Click to expand...
Click to collapse
That`s exactly the same ip address that shows up in the ipv4 address on my wifi card (which is active) when i open cmd.Tell me about the port "8888".When i check it using Open Port Checker, it`s not opened.

Nice job!

cevi said:
That`s exactly the same ip address that shows up in the ipv4 address on my wifi card (which is active) when i open cmd.Tell me about the port "8888".When i check it using Open Port Checker, it`s not opened.
Click to expand...
Click to collapse
Ok. Port 8888 is the default port used by Fiddler. First, go into fiddler and go into Tools > Fiddler Options. Open the connections tab and make sure fiddler says "Listening to port 8888". If not, put 8888 in the box. Next, look for the "Allow remote connections to connect" checkbox and make sure it is checked. Fiddler should automatically open the port for you if these settings are selected, but if not, just port forward port 8888, make sure it is open, and try again.

Ok.The problem was that the macro at the end when it saves the text file, it closes Fiddler too.I did not noticed that in the beginning.Now works fine.
Thanks.
Sent from my Windows Phone 8S by HTC using Board Express

Click Change OEM and getting this Error:
"The specified executable is not a valid application for this OS platform."
And when I click Open Fiddler, getting this:
"The system cannnot find the file specified."
I install Fiddler and it run normally.

otakus007 said:
Click Change OEM and getting this Error:
"The specified executable is not a valid application for this OS platform."
And when I click Open Fiddler, getting this:
"The system cannnot find the file specified."
I install Fiddler and it run normally.
Click to expand...
Click to collapse
That's an error with Windows itself, not my app. What version of Windows are you running? If it's Windows XP or earlier, this application will not work. I'm working on an update today with numerous new features, wait until then and see if it works (If you are not running XP)

iPwnza said:
That's an error with Windows itself, not my app. What version of Windows are you running? If it's Windows XP or earlier, this application will not work. I'm working on an update today with numerous new features, wait until then and see if it works (If you are not running XP)
Click to expand...
Click to collapse
Hello,
thanks for the app. On german Win 7 x64 i always get an error after the dialog "configuration required". The app doesn´t create a config file.
Error:
Microsoft .NET Framework:
The system can not find the specified file.
Has somebody a solution for me? Fiddler runs without an error. I don´t know, which file is missing. Tested on 2 computers.

H3ng5t said:
Hello,
thanks for the app. On german Win 7 x64 i always get an error after the dialog "configuration required". The app doesn´t create a config file.
Error:
Microsoft .NET Framework:
The system can not find the specified file.
Has somebody a solution for me? Fiddler runs without an error. I don´t know, which file is missing. Tested on 2 computers.
Click to expand...
Click to collapse
Is this error message appearing after you apply an OEM Change? If not, just ignore the error and continue using the app.

I can't get that to work either. I am running Windows 8.1 x64 (German) which has .Net 4.0 already installed. I installed fiddler for .Net 4 but when I run the OEM Changer i get an error "The System can't locate the specified file". If I click "continue" the app starts and I can select current OEM and new OEM and when I click "make changes" I can see the fiddler splash screen for a split seccond. However, when I enter the proxy into my phone the phone shows the wifi as "connected" but I can not access anything online.
EDIT: Nevermind, I had to check the "Allow remote connections to connect" checkbox in fiddler. Now my phone can access the marketplace but the "Nokia Collection" section is emtpy now. I tried changing to HTC and Samsung Marketplaces.

iPwnza said:
Is this error message appearing after you apply an OEM Change? If not, just ignore the error and continue using the app.
Click to expand...
Click to collapse
The error message still comes on every startup. I always see messagebox hxxp://up.picr.de/15689246rn.png and after that the error message.
Localhorst86 said:
I can't get that to work either. I am running Windows 8.1 x64 (German) which has .Net 4.0 already installed. I installed fiddler for .Net 4 but when I run the OEM Changer i get an error "The System can't locate the specified file". If I click "continue" the app starts and I can select current OEM and new OEM and when I click "make changes" I can see the fiddler splash screen for a split seccond. However, when I enter the proxy into my phone the phone shows the wifi as "connected" but I can not access anything online.
EDIT: Nevermind, I had to check the "Allow remote connections to connect" checkbox in fiddler. Now my phone can access the marketplace but the "Nokia Collection" section is emtpy now. I tried changing to HTC and Samsung Marketplaces.
Click to expand...
Click to collapse
Same Problem here. Now i checked also "Allow remote connections to connect" checkbox in fiddler and then i can connect to marketplace. But i still have the samsung section only.