Will the Malaysk firmware work with my rkpx2 processor running 4.4.4. ?
Need more info. What unit do you have? What is the info showing the settings->help->about page?
HU information
My unit is made by Winmark sold by Pumpkin.
model:LM-C0676-US-A
System version number: PX2_Leima_Common_DQ8015-V2.00.0003.00.00-2015-07-11
Kernel version number 3.0.36+
[email protected] #57 Thu July 2 16:15:35 CST 2015
MCU version number: LM-AND841PX2-8015V1.14
DVD version number: V1.3
Thanks
HU information
Here is more information:
Specifications:
General:
OS: Android 4.4 Kit Kat
CPU: Rockchip PX2 Cortex A9 Dual Core 1.4GHz (Technical Grade)
RAM: DDR3 1GB
Nand Memory: 8GB
Audio output: 4*45W max
Screen Resolution: 800*480
Cold Boot time: about 25-30s
Screen:
Screen Size: 6.2-Inch Digital Screen
Resolution: 800*480
Capacitive Touch Screen (5 points)
Image Brightness /Contrast/ Color Adjustable
nixfu said:
Need more info. What unit do you have? What is the info showing the settings->help->about page?
Click to expand...
Click to collapse
Hi,Nixfu
Any ideas so I can root my unit?
Thanks
Georgetech said:
Hi,Nixfu
Any ideas so I can root my unit?
Thanks
Click to expand...
Click to collapse
Well I don't think the firmware we are all using that is pre-rooted will work on this because the processor is different. I have never seen this processor in a head unit. Its possible it maybe is an up and coming processor and we might see more of them, but right now you are kinda on your own.
Have you tried to enable root via the factory settings password?
Try to go to Settings->Factory Settings, and enter *#hct#root# as the password, it enables root on the device, temporarily. If you want it to persist, you then just need to install Superuser or SuperSU from the Play Store. This will work if it is based on the same software as the other popular android head units.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Thanks for your help! but when I go to the factory settings it only show me numbers for password no letters or symbols available. I have attach both processors datasheet. I do not see that much difference between them
but I am not an expert in this field maybe somebody can fill in.
Thanks again!
rk3066 processor data sheet and rkPX2
[EMAIL="http://www.haoyuelectronics.com/service/RK3066/Datasheet/RK3066_datasheet_brief.pdf"]
try password 518, it works on my pumpkin
nleitao said:
try password 518, it works on my pumpkin
Click to expand...
Click to collapse
The password for my radio is 3368.
Xtrons D766A
Hello! I bought a radio tape recorder Xtrons D766A.
Can you tell me whether it is possible to update the MCU and Android on this device and what firmware can I install?
The video from the back camera does not work. If the recorder is only turned on, while Android has not yet started, to include the rear speed, then the picture is there, it shows even when Android has already booted. But if you turn on the back, when Android has already started - the picture is gray. There is no "No Signal" message, as if to disconnect the camera at all - just a gray screen.
I think the problem is in synchronizing the firmware MCU and Android.
I contacted the manufacturer, MCU and Android firmware were sent to me. I updated them, but as it turned out they are the same versions that I had.
Can I install something else on this hardware?
RKPX3
MCU - LM-AND841-7090V1.22
Android - 4.4.4
CPU - RKPX3 (Technical Grade)
Core - Quad-core
GPU - Mali-400MP4 GPU, 600MHz
Processing Speed - 1.6GHZ
ROM - 16G
Related
Can some help me indentify this unit ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It boots up with bootlogo of topway 4.4
specs are:
1. System: Android 4.4.2
2. CPU: Rockchip PX3 Cortex A9 Quad Core 1.6GHz
3. RAM Memory: DDR3 1GB
4. Nand flash : 16G
6. Resolution: 7inchs HD 1024*600 Capacitive Touch Screen
7. Support Mirror-Link
8. Built-in WiFi Adapter
9. Support Bluetooth OBD II ELM-327
10. Support 3G Dongle
11.Support OBD, DVR, Rear camera,
MCU version is 5.3.18
did some research in the unit and looks like the rom is based on:
astar_y3-eng 4.4.2 KVT49L 20150206 test-keys
but thats a allwinner tablet
if someone can help me out to indentify this unit please
Nobody?
I've got same HU just like this. After installed by mechanic (cause I can't install it) the roof monitor display nothing, he said the unit doesn't have video output jack. Are you kidding me...?
I've been trying to boot to recovery menu gonna upgrade ROM many ways & many time, but always fail.
Someone please help me,....
Looks the exact same as mine here:
http://forum.xda-developers.com/and...oying-rk3188-rk3066-2-din-head-units-t3193170
You should run the malaysk firmware on it.
D3LTA said:
MCU version is 5.3.18
Click to expand...
Click to collapse
I think it's not a MTCB unit, no version 5.3: http://forum.xda-developers.com/showthread.php?t=3246386
Can you post all the MCU version name please? I'm pretty sure that it non begin with "MCTB"...
it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Allwinner R16 Cortex A9 Quad Core 1.6GHz
The firmware there works on the unit.
Now running the Navi IQ firmware and thats way better.
Hi,
is there a 5.1 rom for the mcu 5.3.18-7-10-650201-160220?
or how can i upgrade to min 4.4.4?
i have now 4.4.2 Navi IQ and i'm experience problem with the rom. The biggest problem i have is that the steeringwheel controls not always
work like they should.
cheers
samm000 said:
Hi,
is there a 5.1 rom for the mcu 5.3.18-7-10-650201-160220?
or how can i upgrade to min 4.4.4?
i have now 4.4.2 Navi IQ and i'm experience problem with the rom. The biggest problem i have is that the steeringwheel controls not always
work like they should.
cheers
Click to expand...
Click to collapse
5.1 rom for TopWay R16 Quadcore
just paste this in the address bar and download the rar file.
cardvdpc.com/img/Jessica/4.4%20upgrade%20to%205.1/
jcm11215 said:
5.1 rom for TopWay R16 Quadcore
just paste this in the address bar and download the rar file.
cardvdpc.com/img/Jessica/4.4%20upgrade%20to%205.1/
Click to expand...
Click to collapse
Thnx, but the from is a fake 5.1.
If someone like to update there r16 Quadcore to 6.0.1 here it is: https://forum.xda-developers.com/an...s/how-to-update-quadcore-r16-tonghai-t3635779
Hello all!
I'm only getting sound out of their radio app... No audio with anything else. :/
Main Parameters
*OS: Android 4.4.4
*CPU: Rockchip Cortex A9 Quad Core
*Main Frenqency:1.6GHz
*RAM:SAMSUNG 2GB DDR3
*ROM:32GB
Android Version: 4.4.4
CPU Info: Cortex-A9 QuadCore, GPU3D: Mali-400 MP4, RAM: 2GB DDR3
System Info: HHQ Summer 2.0
MCU: HHQ_60:C6R_R76_V1.00_CAN(DaZhongOT)
BT Version: GOCBC8_V1.0/2016:06:15:11:34:43
I'm wondering if there are any known ROMS that have been tried on this unit or worth trying? Thanks!
SINOSMART Quad Core 1.6GHz RAM 2GB 10.2'' Android 4.4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Similar unit
Hi!!
I have a similar unit as you with the same MCU Version. Did you manage to find anything?. I was wondering if you know the password to access to the car configuration menu or how to root the device.
Thanks in advance!
captg1 said:
Hello all!
I'm only getting sound out of their radio app... No audio with anything else. :/
Main Parameters
*OS: Android 4.4.4
*CPU: Rockchip Cortex A9 Quad Core
*Main Frenqency:1.6GHz
*RAM:SAMSUNG 2GB DDR3
*ROM:32GB
Android Version: 4.4.4
CPU Info: Cortex-A9 QuadCore, GPU3D: Mali-400 MP4, RAM: 2GB DDR3
System Info: HHQ Summer 2.0
MCU: HHQ_60:C6R_R76_V1.00_CAN(DaZhongOT)
BT Version: GOCBC8_V1.0/2016:06:15:11:34:43
I'm wondering if there are any known ROMS that have been tried on this unit or worth trying? Thanks!
SINOSMART Quad Core 1.6GHz RAM 2GB 10.2'' Android 4.4
View attachment 3914673
View attachment 3914674
View attachment 3914675
Click to expand...
Click to collapse
pablosp76 said:
Hi!!
I have a similar unit as you with the same MCU Version. Did you manage to find anything?. I was wondering if you know the password to access to the car configuration menu or how to root the device.
Thanks in advance!
Click to expand...
Click to collapse
Password should be: 1617, let me know if it works for you.
If doesn't work try 16176699 or 66668888 or 3368
I got for my CX5 10.1" unit IC: NXP-TEA6685
Main Parameters
*OS: Android 6.0.1
*CPU: T3 Cortex quad-core K2001M
*Main Frenqency:1.6GHz
*RAM: 2GB DDR3 (1.7 actual)
*ROM: 32GB (24 actual)
I need to pull out more info...
My biggest concern with this unit is, that doesn't see my bt devices (only phone bt)...
Wondering if there is way around it, so it can see other BT devices.
I bought a Marubox M706T3 from Ali. The specs say it comes with an Allwinner A23 quad core CPU. I want to upgrade Android to 7.1.2, but there doesn't seem to be a ROM for the A23 However, the information I get from CPU-Z is not conclusive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^^ Here it identies as A23...
^^ but the model is T3...
^^ and so is the build.
Last but not least, the model number of the head unit is M706T3.
@****-jones mentioned a Russian forum (4pda.ru) in another thread, and after some digging around I found a post mentioning the A23 and T3 ( 4pda.ru/forum/index.php?showtopic=806442&st=7900#entry72921019 ), but the conclusion gets lost in translation.
What are your thoughts: should a T3-rom work?
Anyone?
It says:
Allwinner A23 - dual core processor, the Chinese guys probably made a mistake in the description.
T3 = CorteX A7
The marubox description is correct in the beginning, but then something apparently went wrong.
This is also in the OP:
Attention! Those who had Android 6 out of the box are strongly NOT recommended to move to android 7, after flashing MCU of android 7 there will be no way back, you will keep with MCU of 7 forever, if you go back to 6, you will not be able to flash MCU for the version from 6. On android 7, old mother boards can behave unpredictably, in most cases the internal microphone stops working and bluetooth volume will reset when rebooting.
Gershik said:
It says:
Allwinner A23 - dual core processor, the Chinese guys probably made a mistake in the description.
T3 = CorteX A7
The marubox description is correct in the beginning, but then something apparently went wrong.
This is also in the OP:
Attention! Those who had Android 6 out of the box are strongly NOT recommended to move to android 7, after flashing MCU of android 7 there will be no way back, you will keep with MCU of 7 forever, if you go back to 6, you will not be able to flash MCU for the version from 6. On android 7, old mother boards can behave unpredictably, in most cases the internal microphone stops working and bluetooth volume will reset when rebooting.
Click to expand...
Click to collapse
As I understand, older model head units get upgraded CPU's sometimes. Some advertisements say "units purchased after date X come with CPU Y". Maybe this is the case here too, since I found this on the inside of the head unit...
Maybe they upgraded the CPU/RAM-module to run Android 7? Would it be able to run the ROM mentioned at 4pda.ru/forum/index.php?showtopic=837879 ?
Thijsmans said:
As I understand, older model head units get upgraded CPU's sometimes. Some advertisements say "units purchased after date X come with CPU Y". Maybe this is the case here too, since I found this on the inside of the head unit...
Maybe they upgraded the CPU/RAM-module to run Android 7? Would it be able to run the ROM mentioned at 4pda.ru/forum/index.php?showtopic=837879 ?
Click to expand...
Click to collapse
So I couldn't find a 7.1.2 ROM on 4PDA, but many people contacted the sellers they got their devices from and they sent them ROMS, so you should try that.
Hi,
Sorry, newbie with this thing.
I have Android 10 head unit for Audi A3/A4
Android version: 10
Hardware information: 4-Core AllWinner - ROM 32GB - DDR3 2GB - 1024x600
Kernel version: Linux 4.9.118
OS Version: KC1C0121-036-1.0.4.3.1 - IVT - 20191212
MCU version: STM8-20190919-1-KC2-64
Promblem is that it's damn slow. I tried to root it with Kingo Root, but it didn't completed it.
Any tutorial here how I can make it faster?
102649259 said:
I'm sorry to tell you that you can't use app to get root permission from Android 6 or above
You need a root. You have to provide firmware for us to analyze before we know whether we can root
Click to expand...
Click to collapse
Where, I can find the firmware info?
That's all the information what I can find from the device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- System: Android 10.0
- CPU: Cortext A7 1.8G HZ ,Quad-Core GPU:SGX544
- RAM: 2GB
- ROM: 32GB
102649259 said:
Android 10 may be fake, you can contact the seller for firmware
Click to expand...
Click to collapse
Seller doesn't know or doesn't want to give it to me. Is there any other way how I can find it?
I had the same radio with android 9 and it was much faster than the new with android 10..
If there is a downgrade to Android 9 i would do it.
hi all, i have allwinner t3 p1 with android 10 , i go to factory setting and find style setting but when i choose some of on styles and save,after system reboot nothing change , anyone can tell me how i must change theme?
Hello! PLS can you help me to upgrade an android head unit E87 CCC EUR IDRIVE 8227
version BMWID6_0S_1.31
MCU Z30_B0_Y8_00_201225A
ADROID SECURITY PATCH LEVEL OCTOMBER 5 2019
BILD NUMBER FULL_8227_DEMO-USERDEMBURG 10 0110191610719904 -USERDEMBURG
CUSTOM BUILD VERSION ALPS-MP-O1.MP5
API 27 plss
hallo friends,
i need your help.
my head unit does not show up any bluetooth settings ( i want to connect wireless controllers etc )
I have linked the Screen with MCU
Thanks.
Android: 10
HW-Information: 4-Core AllWinner - ROM 32GB - DDR3 2GB 1024x600
Kernel: Linux 4.9.118 - Wed Apr 8 16:52:28 CST 2020
OS Version: KC1C01A5-O36-1.0.4.3.1 - BLINK161 - 20200408
MCU Vers: STM32-20200403-11-KC1-37
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This unit is an stm32 MCU type. There are threads for this unit in the Android head units forum.
Not an mtcd/e unit. Ive requested a mod move to android head units.
Bluetooth Setting works for me - do you still need help?
Hello vimar002,
Ich habe exactly the same unit - Bluetooth works for me like with any other device. The unit is able to initate calls via my mobile phone and I can listen to music from the phone via the device.
Do you still need any help?
I have some questions around the DVD use and CAN Bus Settings with the device. Were you able to make CAN Bus settings? I am unable to find the right menu for that. There is just a view were it says: "CAN Bus --"
Second question: I can enter a DVD in the device, but then the device displays a very prudent message: Don't watch and drive! Fine for me, but when I switch off the engine the device turns off. So no viewing ofany DVD.... I think this might be related to the CAN Bus settings - the device might not know that the car is not moving and the parking brake on.
Kind regards,
mentos
vimar002 said:
hallo friends,
i need your help.
my head unit does not show up any bluetooth settings ( i want to connect wireless controllers etc )
I have linked the Screen with MCU
Thanks.
Android: 10
HW-Information: 4-Core AllWinner - ROM 32GB - DDR3 2GB 1024x600
Kernel: Linux 4.9.118 - Wed Apr 8 16:52:28 CST 2020
OS Version: KC1C01A5-O36-1.0.4.3.1 - BLINK161 - 20200408
MCU Vers: STM32-20200403-11-KC1-37
Click to expand...
Click to collapse