Database Users

[Q] Flashing Modem - Odin mode error: "Secure Check Fail: mdm"

Hey guys,
I'm trying to flash an updated modem on my i337. Right now its modem is AMDB. I've tried to flash both the AMDL, AMDL_U, and AMF3 modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on three different machines (all w/ the updated samsung drivers). Two Win7 and one Win8. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDL modem still shows.
What's going on w/ this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.

You're a brave soul. Have you tried this in recovery http://forum.xda-developers.com/showthread.php?p=42418958

jd1639 said:
You're a brave soul. Have you tried this in recovery http://forum.xda-developers.com/showthread.php?p=42418958
Click to expand...
Click to collapse
Well... That was much easier than I thought it would be. Thanks. Might I ask, why say I'm a brave soul?

Trying to flash those modems with odin. Where did you get them? You can brick your phone flashing the wrong stuff.

jd1639 said:
Trying to flash those modems with odin. Where did you get them? You can brick your phone flashing the wrong stuff.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2324667

Is there an actual fix to this issue? The CWM flashable zips don't have the latest baseband.

Blaze9 said:
Is there an actual fix to this issue? The CWM flashable zips don't have the latest baseband.
Click to expand...
Click to collapse
The mf3 cwm flash able zip is the latest modem/baseband for our i337. Its in the thread linked.
Sent from my SGH-I337 using Tapatalk 2

Febby said:
The mf3 cwm flash able zip is the latest modem/baseband for our i337. Its in the thread linked.
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
The zip for MF3 located here is CWM flashable?
http://forum.xda-developers.com/showthread.php?t=2324667
**Edit***
Just tested it. Yeah, they worked. I dunno why the instructions said to use Odin for the Zips as well.
Thanks

Blaze9 said:
The zip for MF3 located here is CWM flashable?
http://forum.xda-developers.com/showthread.php?t=2324667
**Edit***
Just tested it. Yeah, they worked. I dunno why the instructions said to use Odin for the Zips as well.
Thanks
Click to expand...
Click to collapse
Glad I helped. Lack of proper instructions in that thread.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Please help, I flashed a rom and dont have any signal,
I am using a samsung sgh-m919 and My baseband version is m919uvufok3. I tried installing i9505xxuhpf3 through odin cp but it fails. please help.... ;(

Flash the stock m919 ROM from sammobile.com in Odin. The S4 forum for the m919 is here: http://forum.xda-developers.com/galaxy-s4-tmobile

[Q]Flashing Lollipop help

i have been trying to install stock Lollipop on my device. i have followed both http://www.androidpit.com/how-to-get-android-5-0-lollipop-on-the-galaxy-note-3 and http://techbeasts.com/2015/02/14/update-galaxy-note-4-n910f-android-501-lollipop-official/ to the letter. This is also my fourth or fifth time using Odin. Every attempt has failed. i have tried Odin 3.10, 3.09, and 3.07 and got the same results:
Code:
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone's download screen gave thisd message:
Code:
Secure Check Fail : sbl1
until i switched from "N9005XXUGBOB6_N9005XEOGBOA4_XEO" to "N9005XXUGBOA5_N9005XEOGBOA4_XEO" and also freezing any anti-theft app that may be locking my device somehow. Now the screen says:
Code:
Secure Check Fail : aboot
i am rooted (running Omega 24) and to be sure, i re-flashed auto-root
i have tried 4 different USB cables
No USB hubs, i am connected directly to my PC
Firewall, AntiVirus, and Anti Malware software are all off.
i have run Odin as admin
Reactivation Lock is not ticked
Some other things me screen says that may be of some help are:
Code:
QUALCOMM SECUREBOOT: ENABLE
followed by some coupling of letters and numbers and:
Code:
Write Protection: Enable
i am hoping that a factory reset can be my very last resort. i am contemplating reflashing my current Omega ROM and then retrying this.
Any ideas?
EDIT: Factory Reset did not change anything

Is your device unlocked or branded?

Joku1981 said:
Is your device branded or unlocked?
Click to expand...
Click to collapse
It should be unlocked. i unlocked it a while ago when i flashed my first ROM. i have been flashing Omega roms ever since. i cannot imagine my phone would lock itself back up...

billybag said:
It should be unlocked. i unlocked it a while ago when i flashed my first ROM. i have been flashing Omega roms ever since. i cannot imagine my phone would lock itself back up...
Click to expand...
Click to collapse
Odin gave you fail in the NAND. This mean that you have lost plenty of files in EFS. Try to restore your OMEGA backup.

Joku1981 said:
How you unlocked it? By IMEI or other method?
Click to expand...
Click to collapse
Damn, i don't remember. It seemed so long ago. i don;t suppose there is a way to check...
EDIT: while attempting a restore of a nandroid backup, i noticed something. The following backup files were missing:
.android_secure.vfat.tar and
.android_secure.vfat.tar.a

i REALLY appreciate your time and help, by the way. This is so frustrating. One person told me that they repartitioned and selected bootloader when they flashed, but was not advising me to do so.

billybag said:
i REALLY appreciate your time and help, by the way. This is so frustrating. One person told me that they repartitioned and selected bootloader when they flashed, but was not advising me to do so.
Click to expand...
Click to collapse
Do you have any EFS backup?

billybag said:
i REALLY appreciate your time and help, by the way. This is so frustrating. One person told me that they repartitioned and selected bootloader when they flashed, but was not advising me to do so.
Click to expand...
Click to collapse
If you want to flash stock LP, I would just bite the bullet and do it and first get a working system. Then install Recovery and re-root - I use TWRP.tar file so I can flash it in Odin and the SuperSU zip file that I then flash in Recovery.
You don't say which N3 you have but are you sure you have the right ROM for it?
Did you turn off the phone and remove the battery for a bit THEN go into download mode?
Are you using v3.09 of ODin PC?
I've done mine twice for other reasons since LP came out - I untick the auto-reboot so after I flash the stock firmware I can flash TWRP - then it's boot into Recovery and install my custom ROM (I use Temasek's CM12) PA GApps and the SuperSU.zip, then set up the phone - usually I then Restore only Data from my latest TWRP backup but on occasion I've DL'd Titanium from Ply and used that to Restore my apps from extSD.

Journyman16 said:
If you want to flash stock LP, I would just bite the bullet and do it and first get a working system. Then install Recovery and re-root - I use TWRP.tar file so I can flash it in Odin and the SuperSU zip file that I then flash in Recovery.
You don't say which N3 you have but are you sure you have the right ROM for it?
Did you turn off the phone and remove the battery for a bit THEN go into download mode?
Are you using v3.09 of ODin PC?
I've done mine twice for other reasons since LP came out - I untick the auto-reboot so after I flash the stock firmware I can flash TWRP - then it's boot into Recovery and install my custom ROM (I use Temasek's CM12) PA GApps and the SuperSU.zip, then set up the phone - usually I then Restore only Data from my latest TWRP backup but on occasion I've DL'd Titanium from Ply and used that to Restore my apps from extSD.
Click to expand...
Click to collapse
That is what i am having problems with. i know how to flash custom roms. i was also able to flash stock KK when it came out. It is stock lollipop that i cannot get to flash. i am using an SM-n9005 (tmobile). i am going to try different firmware downloads (CSCs) and see what that does.
Also, i have tried Odin versions 3.07, 3.09, and 3.10

billybag said:
That is what i am having problems with. i know how to flash custom roms. i was also able to flash stock KK when it came out. It is stock lollipop that i cannot get to flash. i am using an SM-n9005 (tmobile). i am going to try different firmware downloads (CSCs) and see what that does.
Also, i have tried Odin versions 3.07, 3.09, and 3.10
Click to expand...
Click to collapse
Do you know your original firmware? I'm wondering because some versions have different sized partitions and flashing another type causes fails. i.e. I had a HK S3 and had to flash a PIT file before I could use European firmware. Might it be something along those lines?

Have practically the same situation...
The furthest I've got is the following
Code:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
But again, with any version of odin and any firmware (lollipop or kitkat) i'm trying to flash, it stucks with
Code:
<ID:0/003> Complete(Write) operation failed.
PS I also have
Code:
QUALCOMM SECUREBOOT: ENABLE
Write Protection: Enable
and my phone was originally locked to spanish vodafone.

Sorry for the delay. i just got around to giving it another shot and it worked. i found an official, made for TMOBILE, version of the firmaware.
Code:
N900TUVUFOB6_N900TTMBFOB6_TMB
for anyone else that may be having trouble. You can find it here: http://www.sammobile.com/firmwares/download/43850/N900TUVUFOB6_N900TTMBFOB6_TMB/
i was using n9005 firmwares, which is usually fine except int his case i needed a tmo one.
Thanks again for everyone's input. Hopefully this post can help someone else out now.

[HELP] Trying to root,can't turn on wifi...

So basically,got phone last night,tried regular rooting,didn't work,read up some more,tried the whole "Root AT&T Galaxy S4 SGH-I337 on I337UCUFNJ4 Firmware" even though my firmware is I337UCUFNJ5 and not 4,anyway,thread told me to flash I337_NC1_Stock_Kernel using the Odin firmware flashing tool.
I did....used towelroot app 3.0,didn't work,needed internet access (yes I got it straight from their site) fond a 2.0 version,used it,says "you should have root,no reboot required" so since I didn't have wifi on the phone,I went right back into odin and tried to use I337_NJ4_Stock_Kernel and flash it using the Odin tool to get back to the stock NJ4 kernel. Didn't work,failed,now I'm STUCK on nc1 kernel with no wifi access... help? please? this is my first rooting and I am legit clueless to most of this.. also how do I even find my boot loader etc?
EDIT: This might not be in the right thread,if so,please move to appropriate thread moderator.

SageNightmare said:
So basically,got phone last night,tried regular rooting,didn't work,read up some more,tried the whole "Root AT&T Galaxy S4 SGH-I337 on I337UCUFNJ4 Firmware" even though my firmware is I337UCUFNJ5 and not 4,anyway,thread told me to flash I337_NC1_Stock_Kernel using the Odin firmware flashing tool.
I did....used towelroot app 3.0,didn't work,needed internet access (yes I got it straight from their site) fond a 2.0 version,used it,says "you should have root,no reboot required" so since I didn't have wifi on the phone,I went right back into odin and tried to use I337_NJ4_Stock_Kernel and flash it using the Odin tool to get back to the stock NJ4 kernel. Didn't work,failed,now I'm STUCK on nc1 kernel with no wifi access... help? please? this is my first rooting and I am legit clueless to most of this.. also how do I even find my boot loader etc?
EDIT: This might not be in the right thread,if so,please move to appropriate thread moderator.
Click to expand...
Click to collapse
Here is the link for the NJ5 kernel.
If you still have problem go here and following the steps to start every thing from NB1.

sway8966 said:
Here is the link for the NJ5 kernel.
If you still have problem go here and following the steps to start every thing from NB1.
Click to expand...
Click to collapse
so I tried all of this,but odin fails no matter what sigh.. Odin tells me this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any clue what's wrong? cause I'm really lost here

SageNightmare said:
so I tried all of this,but odin fails no matter what sigh.. Odin tells me this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any clue what's wrong? cause I'm really lost here
Click to expand...
Click to collapse
Try with different version of odin (the latest is 3.10 I think), use different usb port, use different usb cable.
Did you load your file in the AP (auto partition) slot?

sway8966 said:
Try with different version of odin (the latest is 3.10 I think), use different usb port, use different usb cable.
Did you load your file in the AP (auto partition) slot?
Click to expand...
Click to collapse
Yup I tried all of that except a different odin version,but long story short,I managed to go into town and a friend of mine used a different version of odin and got me nice and sorted out,thanks for help btw

Phone won't boot, even into recovery mode

Hi all, im desperate for help here!!
I flashed Dr Ketans Rom to my Note 4 a couple of days ago but decided to try to go back to stock today due to a bug with my email. Anyway, a long story short, my phone failed the flashing process with odin whilst trying to flas the latest stock firmware from sammobile and then my phone refused to start up again.
I now get a screen telling me the firmware up grade process went wrong but I cant even reboot into recovery to install anything else.
I have tried flashing both TWRP and Philz recovery but both just flash the title screen on and off but never load up.
I have tried 2 firmware versions from sammobile and both end in fail, it seems like I cant flash any firmwares with odin which is a right pain because I cant get to recovery to install a zip file....
Please help, Im sooooo stuck!
Edit - this is the log from Odin if it helps anyone... Ive now tried software 4.4.4 also but nothing works.
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I downgraded from that ROM (I'm guessing it was the S7 Edge ROM) to KK 4.4.4 a few days ago.
I think your problem is, that you haven't reinstalled the correct Bootloader and Modem files before you went back to KK.
I used the ones found here http://forum.xda-developers.com/note-4/general/downgrade-official-mm-to-kitkat-t3383885
And everything worked.
What I did was, download the files and download the 4.4.4. firmware from SamMobile (the one I used is this (a BTU link, which is for the UK):
Code:
http://www.sammobile.com/firmwares/download/39930/N910FXXU1ANK4_N910FBTU1ANK2_BTU/
Direct link: http://dl.sammobile.com/OlFYQy8rLD1ULys8RzcnTUVYLzE9JkUpKyVXKDE8PFoOARlJUyA5RStXVEc1UlNHTVFaQ1NJEgkJHQBNSVpeQEZRXUM./N910FXXU1ANK4_N910FBTU1ANK2_BTU.zip
Then wipe your current setup in TWRP.
Reboot the download mode.
Install the Bootloader and Modem files in Odin.
Install the KK firmware in Odin.
Reboot and install TWRP in Odin.
Then either restore a previous KK backup or start from a clean slate.

0-0-0 said:
I downgraded from that ROM (I'm guessing it was the S7 Edge ROM) to KK 4.4.4 a few days ago.
I think your problem is, that you haven't reinstalled the correct Bootloader and Modem files before you went back to KK.
I used the ones found here http://forum.xda-developers.com/note-4/general/downgrade-official-mm-to-kitkat-t3383885
And everything worked.
What I did was, download the files and download the 4.4.4. firmware from SamMobile (the one I used is this (a BTU link, which is for the UK):
Code:
http://www.sammobile.com/firmwares/download/39930/N910FXXU1ANK4_N910FBTU1ANK2_BTU/
Direct link: http://dl.sammobile.com/OlFYQy8rLD1ULys8RzcnTUVYLzE9JkUpKyVXKDE8PFoOARlJUyA5RStXVEc1UlNHTVFaQ1NJEgkJHQBNSVpeQEZRXUM./N910FXXU1ANK4_N910FBTU1ANK2_BTU.zip
Then wipe your current setup in TWRP.
Reboot the download mode.
Install the Bootloader and Modem files in Odin.
Install the KK firmware in Odin.
Reboot and install TWRP in Odin.
Then either restore a previous KK backup or start from a clean slate.
Click to expand...
Click to collapse
Thanks very much for your reply!
My problem now is that I cant reboot into any recovery (it sends the phone into a bootloop) and now Odin doesn't recognise my phone. Ive tried 2 versions of Odin and 3 cables all with no luck, strange as it used to connect fine.

sudburys said:
Thanks very much for your reply!
My problem now is that I cant reboot into any recovery (it sends the phone into a bootloop) and now Odin doesn't recognise my phone. Ive tried 2 versions of Odin and 3 cables all with no luck, strange as it used to connect fine.
Click to expand...
Click to collapse
No problem, at least it bumped your thread.
I'm sorry, I don't know the answer to your questions.
All I can suggest is taking it to a phone shop/service centre to have it reset. I appreciate that isn't always possible.
Hopefully, someone will help.

0-0-0 said:
No problem, at least it bumped your thread.
I'm sorry, I don't know the answer to your questions.
All I can suggest is taking it to a phone shop/service centre to have it reset. I appreciate that isn't always possible.
Hopefully, someone will help.
Click to expand...
Click to collapse
No probs...
Thanks for the try anyway

Latest Firmware for Galaxy Note 4 (N910TUVS2EQB1 AND N910T3) New N910TUVU2EQC1

This is the latest firmware for Tmobile Galaxy Note 4. Flash it at your own risk
I am not responsible if your phone blowup or sing the national anthem.
Samsung Galaxy USB Driver
New N910TUVU2EQC1
MDSUM: f86917e3e1763e9fb59bba6ca642fb22
How to root this:
1. Odin TWRP "uncheck auto reboot in odin" pull battery out put back in.
2. Boot to TWRP by holding Volume up Power and Home key together.
3. Flash SuperSu or flash this by PVSGH rooted rom
Enjoy
"Install Xposed Framework"
Install this first as apk XposedInstaller_3.1.1.apk
Go this this thread and flash xposed framework
I install this Qb1 stock RomControl. you guys can try it
For SM-N910T
MDSUM: 0b38870b792e37de28d1c6de721f5543
Odin 3.1.1
TWRP 3.0.2.0
Use this guide for root HERE
MDSUM: 29358c76fd6de55c086eb67bb1bff418
New firmware for SM-N910T3 (N910T3UVS3EQB1) Download HERE

Thanks for sharing, is the bootloader locked? are we able to downgrade? Thanks1

The-Accountant said:
Thanks for sharing, is the bootloader locked? are we able to downgrade? Thanks1
Click to expand...
Click to collapse
I have N910t and its not lock. I don't know about t3. You can use the guide posted by Deexii HERE just find the latest supersu if you will. Its has a good battery life. Always full wipe after and before odin. Good luck

boot loader and modem parted out
I've parted out the bootloader (BL) and modem (CP) for this firmware for those who don't wanna update their system: https://www.androidfilehost.com/?w=files&flid=158710
I've not flashed these yet myself, but did the same thing for EPK2 and had no issues flashing them. I'll probably get to updating my 910t this weekend and comment here if I have any issues.

Screenshots
I know I'm kinda late but I thought I would throw up some screenshots of the description of the update for anyone interested.

I have t3 and I can i use the BL and CP from T build rather than the T3. thanks

I have a n910t and update it for odin but on startup it stays on the T-mobile screen. any ideas
**Forget it and start 10 minutes the first start

razholio said:
I've parted out the bootloader (BL) and modem (CP) for this firmware for those who don't wanna update their system: https://www.androidfilehost.com/?w=files&flid=158710
I've not flashed these yet myself, but did the same thing for EPK2 and had no issues flashing them. I'll probably get to updating my 910t this weekend and comment here if I have any issues.
Click to expand...
Click to collapse
Just tried the modem alone not HLOS and not the bl stuff and it seems to work okay w/cm14. LTE works and a call went through anyway. Thx for doing this I hate having to download 2 gigs just to get like 100K of files.. I'll probably update the bl and such soon..
(updated via heimdall not odin fwiw)

razholio said:
I've parted out the bootloader (BL) and modem (CP) for this firmware for those who don't wanna update their system: https://www.androidfilehost.com/?w=files&flid=158710
I've not flashed these yet myself, but did the same thing for EPK2 and had no issues flashing them. I'll probably get to updating my 910t this weekend and comment here if I have any issues.
Click to expand...
Click to collapse
I've since flashed bq1 bl&cp and everything is working fine, though I'm on emotion 14.1 which hsbadr keeps updated with the latest proprietary blobs.

razholio said:
I've since flashed bq1 bl&cp and everything is working fine, though I'm on emotion 14.1 which hsbadr keeps updated with the latest proprietary blobs.
Click to expand...
Click to collapse
Cool. I'll give it a try in the next day or two and report back.
Update: Got impatient.. Tried the rest:
$ sudo heimdall flash --ABOOT aboot.mbn --APNHLOS NON-HLOS.bin --RPM rpm.mbn --SBL1 sbl1.mbn --DBI sdi.mbn --TZ tz.mbn
....
Uploading ABOOT
100%
ABOOT upload successful
Uploading APNHLOS
100%
APNHLOS upload successful
Uploading RPM
100%
RPM upload successful
Uploading SBL1
100%
SBL1 upload successful
Uploading DBI
100%
DBI upload successful
Uploading TZ
100%
TZ upload successful
Ending session...
It auto-rebooted. SEEMS to be working, but it's been about 30 seconds of testing
BTW, for anyone reading this who wants to also flash to modem, just add --MODEM modem.bin to the list of files above.
I see Baseband version N910TUVS2EQB1 listed in About Phone so that's good too.
(also-- I notice that it unfortunately didn't fix the timezone thing-- I still have to manually set it to keep it from jumping back to GMT)
Also, quick question-- I notice that NON-HLOS seems to always be grouped with modem.bin-- although I flash the modem as a standalone by itself (and used an older one for months alone) and it never had an issue.. is there a reason those two are treated as a group? I think (but am not 100%) that the NON-HLOS stuff contains the key stuff in /vendor. It's been a while tho since I did it so maybe it's muddled in my brain
Edit: Also, for the record, I'm using the Heimdall from here: link... No wait, actually that's gone. I pushed my working Heimdall source to here. It may be fixed better upstream but this works on Note 4 for me.

Thanks for the upload. Much faster than Sammobile's download.

Thank you for posting the ROM, I appreciate it.

Anybody has the md5sum for the sammobile firmware?

rajil.s said:
Anybody has the md5sum for the sammobile firmware?
Click to expand...
Click to collapse
Look again @ the first page

Installing this gives me 2 phone shortcuts and 2 broken Knox container apps? What is this

fattire said:
Also, quick question-- I notice that NON-HLOS seems to always be grouped with modem.bin-- although I flash the modem as a standalone by itself (and used an older one for months alone) and it never had an issue.. is there a reason those two are treated as a group? I think (but am not 100%) that the NON-HLOS stuff contains the key stuff in /vendor. It's been a while tho since I did it so maybe it's muddled in my brain
Edit: Also, for the record, I'm using the Heimdall from here: [email protected]:SaburoJiro/Heimdall.git... No wait, actually that's gone. I pushed my working Heimdall source to here. It may be fixed better upstream but this works on Note 4 for me.
Click to expand...
Click to collapse
Wish I had something intelligent to say on NON-HLOS, but I suspec the components of CP and BL are grouped together because of possible interdependencies, not that they necessarily have to break when out of sync, but the possibility exists. I've worked on build systems, and that's how I would define build artifact units.
Thanks for the heimdal links. I'd prefer not to ever have to fire up my aging winxp VM, but in the past, my heimdal attempts have always failed to identify my samsung products. I'll give this one a try.

Uh is anyone else's phone shortcut missing from the lockscreen?

I can't get this to flash, I have an N910T. Odin does recognize my phone, it shows the blue indicator. I'm using the AP box in Odin. The blue bar moves a bit, then stops cold. I checked the MD5, it matches what OP posted.
Samsung USB driver v1.5.45.0 (downloaded from Samsung's website)
Odin v3.11
Odin log:
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried different cables, different USB ports, no go. I bought this phone brand new in factory-sealed box from a reputable seller on Amazon. I'm pretty sure it's not a fake/clone.
Please help, I don't want to be stuck with a brick that I've only had for less than 24 hrs!

AnonVendetta said:
I can't get this to flash, I have an N910T. Odin does recognize my phone, it shows the blue indicator. I'm using the AP box in Odin. The blue bar moves a bit, then stops cold. I checked the MD5, it matches what OP posted.
Samsung USB driver v1.5.45.0 (downloaded from Samsung's website)
Odin v3.11
Odin log:
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried different cables, different USB ports, no go. I bought this phone brand new in factory-sealed box from a reputable seller on Amazon. I'm pretty sure it's not a fake/clone.
Please help, I don't want to be stuck with a brick that I've only had for less than 24 hrs!
Click to expand...
Click to collapse
Download this and unzip use Odin N910TUVS2EQB1_N910TTMB2EQB1_TMB-v6.0.1.zip

@gmenik6: Thanks, but I got the issue fixed without your zip. I got my file from SamMobile, the only source I really trust. It had the same MD5 as what OP posted.
I had to use a cable from my LG v10, it looks like all my other cables are shot. I'm just surprised that the cable that came with this new phone couldnt cut it, but it charges fine. The ROM flashed and booted fine. But now I'm running LineageOS.
Thanks again!