[Q&A] [Firmware] Samsung Galaxy Grand Prime (SM-G530FZ) official Android 5.0.2 Lolli
Q&A for [Firmware] Samsung Galaxy Grand Prime (SM-G530FZ) official Android 5.0.2 Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Firmware] Samsung Galaxy Grand Prime (SM-G530FZ) official Android 5.0.2 Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
samydc said:
Can someone who downloaded the file reupload it somewhere else.
Because both sites, youmobile and sammobile, have an speedlimit set on 200 KBS so it take More than one hour to download the update.
And my download failed at the half, so it is very frustrating.
Thanks
Gesendet von meinem SM-G530FZ mit Tapatalk
Click to expand...
Click to collapse
does it work if i flash it from another country?
Crimmy20 said:
does it work if i flash it from another country?
Click to expand...
Click to collapse
It does. I flashed the spanish firmware and I am from Portugal everything working normal so far
I'm form Poland and it works great
Does update through odin reset the phone settings?
azraelst said:
Does update through odin reset the phone settings?
Click to expand...
Click to collapse
Yes
Can not get my phone into download mode, just keep restarting. Is there any other way to install firmware?
Yeesssssss!!!!!!!
azraelst said:
Can not get my phone into download mode, just keep restarting. Is there any other way to install firmware?
Click to expand...
Click to collapse
If you have root use flashify, you can download it from the play store
can i?
Can I use this flash for a grand prime (G530H) with this CSC: G530HTFG1AOA1 ?
Seriously? Our CPU is 64 bit ready and samsung releases a 32-bit Android 5.0? SERIOUSLY??!!!
PLS help!
dcduartee said:
If you have root use flashify, you can download it from the play store
Click to expand...
Click to collapse
I cannot root to use flashify and cannot flash through Odin, all because I cannot boot in Download mode. However I can get into recovery, can flash firmware through recovery? Pls help
Problem
I badly need information regarding flashing firmware, my volume buttons are messed up and I can not go into download mode so can not root or use odin but I can go into recovery and use it. I'm sick of waiting for lollipop and now is here but for different region and I cannot flash. My question is can I flash through recovery and how? PLS help
azraelst said:
I badly need information regarding flashing firmware, my volume buttons are messed up and I can not go into download mode so can not root or use odin but I can go into recovery and use it. I'm sick of waiting for lollipop and now is here but for different region and I cannot flash. My question is can I flash through recovery and how? PLS help
Click to expand...
Click to collapse
I lost faith in humanity... Simple yes or no would sufice at this point
At this point, you cant flash ROM to our devices by recovery. Its a stock rom, and you MUST do it by Odin. You can download some apk to change your power menu with advance recovery. In restart option there should be something like "restart to recovery mode" and to "download mode". I dont know if its work, but you can try this
Thanks for replay. I am not rooted and believe that phone must be rooted for such apps.
Sent from my SM-G530FZ using Tapatalk
Related
Hello.
I was trying to install (N9005XXUDMJ7_N9005OJVDMJ4_XSI) on my Note3 N9005 4.3 and all went fine until the very end, it suddenly got stuck with a msg saying (Firmware Upgrade encountered an issue. Pls select recovery mode from kies) and nothing happens when I go to recovery mode in Kies!!!
Kindly Help.
Many thanks
What firmware were you on before that?
How did you install? with what
Deleted
Use kies 3 Restore Samsung Firmware .... only solution at this point or use odin again , i.e if you can get into download mode
Edit: delete
fahadali2315 said:
Use kies 3 Restore Samsung Firmware .... only solution at this point or use odin again , i.e if you can get into download mode
Click to expand...
Click to collapse
Kies 3 restore doesn't work.... It's incompatible with the new bootloaders... Wish people would stop giving oout this USELESS information...
If you were on any of the N**(NB4) roms ie Kitkat, you can't go back to the older jellybean roms ie m**(MJ7).
You will have this problem. Just reflash a kitkat rom onto your Note 3 and you'll be fine...
ultramag69 said:
Kies 3 restore doesn't work.... It's incompatible with the new bootloaders... Wish people would stop giving oout this USELESS information...
If you were on any of the N**(NB4) roms ie Kitkat, you can't go back to the older jellybean roms ie m**(MJ7).
You will have this problem. Just reflash a kitkat rom onto your Note 3 and you'll be fine...
Click to expand...
Click to collapse
Edit :First no one asked for your opinion.
Second READ . have you read , he said he flash 4.3 firmware on a 4.3 n9005. So kies works for that. Think and read before you speak.
Sent from my SM-N9005 using Tapatalk
HELP
aawadhi63 said:
Hello.
I was trying to install (N9005XXUDMJ7_N9005OJVDMJ4_XSI) on my Note3 N9005 4.3 and all went fine until the very end, it suddenly got stuck with a msg saying (Firmware Upgrade encountered an issue. Pls select recovery mode from kies) and nothing happens when I go to recovery mode in Kies!!!
Kindly Help.
Many thanks
Click to expand...
Click to collapse
HELLO DOWNLOAD THE FIRMWARE ANDROID 4.4.2 KITKAT
THEN VIA ODIN install it on 3 NOTES FOR DOWNLOAD MODE
SURELY YOU WILL 'FAIL, return it LEVER BATTERY AND GO IN revovery
FAI WIPEDATA / FACTORY RESET
FAI WIPE CACHE PARTITION
LEVERAGE THE BATTERY AND THEN bring it, JOIN IN DOWNLOAD MODE AND DO FLASH BACK KITKAT FIRMWARE 4.4.2 AND YOU PLACE A HELLO:laugh:
fahadali2315 said:
Edit :First no one asked for your opinion.
Second READ . have you read , he said he flash 4.3 firmware on a 4.3 n9005. So kies works for that. Think and read before you speak.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Actually, as he has installed MJ7 on his phone Kies no longer works... My "opinion" is fact...
If you can't stand being corrected because you're wrong then mate, you have a problem... Maybe you should start to read the thread before replying with pointless and useless information....
ultramag69 said:
Actually, as he has installed MJ7 on his phone Kies no longer works... My "opinion" is fact...
If you can't stand being corrected because you're wrong then mate, you have a problem... Maybe you should start to read the thread before replying....
Click to expand...
Click to collapse
The install didnt go through :/ Thats why he is stuck..if he finds my post USELESS (in capital) , then he can say himself.
Sent from my SM-N9005 using Tapatalk
fahadali2315 said:
The install didnt go through :/ Thats why he is stuck..if he finds my post USELESS (in capital) , then he can say himself.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you gays, it worked out somehow and now I have Omega 12 installed.
Again, thank you and all the best with the argument...!!
ROOT GUIDE OFFICIAL STOCKROM N8000XXUDNE4 KitKat (4.4.2)
First Step Root Using PhilZ CWM
1.) Download Odin
2.) PhilZ CWM Advanced Editition 6.41.6-n8000.tar.md5
3.) Open Odin v3.09
Reboot tablet in Download Mode (press and hold Power + Volume Down buttons)
Connect tablet and wait until you get a blue sign in Odin
Add the philz_touch_6.41.6-n8000.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, and ur tablet will reboot
4.) Boot your phone in Recovery Mode (Press and Hold Power Button + Volume Up)
in CWM go to Philz Settings > Re-Root System (SuperSU)
5.) Reboot your tablet and download SuperSU apps in PlayStore
2nd Step Root Using PhilZ CWM
1.) Download Odin
2.) PhilZ CWM Advanced Editition 6.41.6-n8000.tar.md5
3.) Download SuperSU v1.99 and Push it to your Internal or ExternalSD Card
4.) Open Odin v3.09
Reboot tablet in Download Mode (press and hold Power + Volume Down buttons)
Connect tablet and wait until you get a blue sign in Odin
Add the philz_touch_6.41.6-n8000.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, and ur tablet will reboot
5.) Boot your tablet in Recovery Mode (Press and Hold Power Button + Volume Up)
in CWM go to Install Zip > Choose zip and locate SuperSU v1.99 and flash it... Reboot
Credits to PhilZ & Chainfire
thanks for your thread, but what and where is the offical KK thread now , every thread I find has been closed?
carl1961 said:
thanks for your thread, but what and where is the offical KK thread now , every thread I find has been closed?
Click to expand...
Click to collapse
it' been closed by moderator already
Yup don't understand why 1 of the moderator close all threads. as far as I know you are the 1st one who started a thread regarding the official firmware release. If ever your's is the 1 to be unlock so we can continue discussion regarding the official firmware.
filchi756 said:
Yup don't understand why 1 of the moderator close all threads. as far as I know you are the 1st one who started a thread regarding the official firmware release. If ever your's is the 1 to be unlock so we can continue discussion regarding the official firmware.
Click to expand...
Click to collapse
Search that moderator and you will see he shut a lot of threads down. With legit reasons, I am just still looking for the offial kk thread
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
carl1961 said:
Search that moderator and you will see he shut a lot of threads down. With legit reasons, I am just still looking for the offial kk thread
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
don't know if these 1 is the official 1 " http://forum.xda-developers.com/showthread.php?t=2016792 ". but the title is misleading. Its still referring to 4.1.2.Who would think it includes the 4.4.2 at the last 1 and half pages of that thread only..And the moderator should have given us a thread referring to as the official one,before or when he closed all those thread right?
filchi756 said:
don't know if its this 1 is the official 1 " http://forum.xda-developers.com/showthread.php?t=2016792 ". but the title is misleading. Its still referring to 4.1.2.Who would think it includes the 4.4.2 at the last 1 and half pages of that thread only..And the moderator should have given us a thread referring to as the official one,before or when he closed all those thread right?
Click to expand...
Click to collapse
The thread is for N8010 model not for N8000, I think
rasayan said:
The thread is for N8010 model not for N8000, I think
Click to expand...
Click to collapse
See that's what I meant.The title really is misleading right?that thread includes all variations of note 10.1 2012, just open the opening post.It only discuss the kitkat at the last 2 pages.
Please help can anyone upload this file in multiple parts I am unable to download the official stockrom kitkat from both the links
Thanks in advance
Sent from my GT-N8000 using XDA Premium 4 mobile app
Back to JB after KK update
I am looking for any possibility to comeback to JB rom on n8000 after KK update. Please help me.
hal-2010 said:
I am looking for any possibility to comeback to JB rom on n8000 after KK update. Please help me.
Click to expand...
Click to collapse
you need to have to re-flash the official 4.1.2 stock rom. download it here
german 4.4.2 also rootable?
I wonder, if the german version of the last android update is rootable with this guide.
My intention to ask is the second question, if I can downgrade after a root process to android version 4.1.2.
Thanks!
Dr.Sahnebacke said:
I wonder, if the german version of the last android update is rootable with this guide.
My intention to ask is the second question, if I can downgrade after a root process to android version 4.1.2.
Thanks!
Click to expand...
Click to collapse
Official kk roots this same way.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
this is perfect. Bravo SAMSUNG
Wifi and wifi hotspot not switching on after 4.4.2 update in gt n8000
hello, I updated my gt n8000 with 4.4.2 kitkat afterupdating I was trying to turn on wifi but it was not turning on. then I tried to turn on wifi hotspot but that too is not switching on .
please help
Hey Guys,
this root method is for 8010 too, right?
DonkeyShotter said:
Hey Guys,
this root method is for 8010 too, right?
Click to expand...
Click to collapse
honestly i dont have n8010 so can't test it, but it should be working fine since the only difference of n8000 and n8010 is the 3g.
N8000xxudne5
It Work for N8000XXUDNE5 ???
Tks
How to downgrade locked bootloader KK?
How to downgrade locked bootloader KK?
hal-2010 said:
How to downgrade locked bootloader KK?
Click to expand...
Click to collapse
No chance at the moment as far as I know ...
Markus.
Q&A for I9505XXUHOA7 Odin files . Work 100%
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for I9505XXUHOA7 Odin files . Work 100%. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Original Lollipop?
WOW! This in original by samsung?! isn't It a custom rom?
Sorry for my bad English
Thank you
Bugs? Video youtube ok?downgrade is possible?
Inviato dal mio GT-I9505 con Tapatalk 2
WI-FI Not Working
Same Problem like the above user: WIFI won't turn on! I come from ECHoe v41 lolipop build! Any suggestion?
please make mirror link in androidfilehost sir.
Sent from my GT-I9505 using XDA
help
i did exactly just like instruction. But i got this message.
Can someone tell me why ?
My device is i9505
WI FI NOT WORKING------Solved
Never mind ! Was my fault! Wifi Works ! (like a "tard" didn't waited for the PASS and removed phone from conection "D;oh"
ViPER4android
Hello everyone
Have someone on the rom ViPER installed and when it is working
4 you,can you tell me what i need to do to bring it to work?
I have installed the latest busybox and latest supersu.
Tanks in advance!
Hi guys.. Why we have to flash the PIT file?
For repartition. Pit is not importent
Sent from my GT-I9505 using XDA Free mobile app
Is this the German release not fully international gb?
Can i just flash main file ( firmware) and not these other files like on SS, im especialy nervous when it comes to flashing PIT files, is it really necessary ?
flatzki said:
For repartition. Pit is not importent
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
I know that the PIT file is needee for repartition.. So it isn't necessary to flash?
I have flashed with pit and all is perfect!
All Works great no bugs
kingstark666 said:
I have flashed with pit and all is perfect!
All Works great no bugs
Click to expand...
Click to collapse
You only flashed system (only AP in odin) ?
No i have flashed all files.
I think its the Best complete update your Phone. With all odin files. Then your Phone has no Problems
hope it does or i am f*****...
i know this might sound stupid but will this on the us sprint variant of the s4 (SPH-L720) ?
So I'm wondering. Had my 4.4.2 installed, stock, official, etc. Downloaded these files, used odin, everything works perfectly. Do I need to do something more to prevent any issues? I don't need a root and I don't want to play with anything more to lose my varranty. Because I didn't just lose it right? It's official? Nothing more is needed like custom recovery (whatever that is, these TWRP or something)? Just the files -> odin -> I'm good to go my way?
Q&A for [Share][cwm][philz touch 6] galaxy grand prime (working on sm-g530h/f)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Share][cwm][philz touch 6] galaxy grand prime (working on sm-g530h/f). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Should I have rooted device before flashing this cwm ??
FunGD said:
Should I have rooted device before flashing this cwm ??
Click to expand...
Click to collapse
Yes, it don't work with non-rooted devices.
platinumlayer said:
Yes, it don't work with non-rooted devices.[/QUOTE
ok then last question..can you check knox status after rooting and flashing this cwm please ??
Click to expand...
Click to collapse
FunGD said:
platinumlayer said:
Yes, it don't work with non-rooted devices.[/QUOTE
ok then last question..can you check knox status after rooting and flashing this cwm please ??
Click to expand...
Click to collapse
it change knox status, and you will lose warranty.
Click to expand...
Click to collapse
Installed successfully on 530H. But the screen becomes small by a very little margin. Very very little. I mean its unnoticeable if u dont notice it. Also it shows "RECOVERY IS NOT SEANDROID ENFORCING Set Warranty Bit : recovery" on the boot. And if u reboot it or if u turn it off then boot it, it always goes into recovery. Other than that.. It works fine. Does all other stuff.
Great Work
Thanks brother, its work for me, Now i am finishing backup my rom and finishing deodex my rom... Waiting for CyanogenMod Support...
Sorry for my bad english..
From Indonesia SM-G530H
I think the link for download is dead
Kade Sonix said:
Installed successfully on 530H. But the screen becomes small by a very little margin. Very very little. I mean its unnoticeable if u dont notice it. Also it shows "RECOVERY IS NOT SEANDROID ENFORCING Set Warranty Bit : recovery" on the boot. And if u reboot it or if u turn it off then boot it, it always goes into recovery. Other than that.. It works fine. Does all other stuff.
Click to expand...
Click to collapse
I have exact same problem with you, my grand prime always go to recovery mode everytime i reboot my phone, i know its not very big problem, but kinda annoying because i have to reboot my prime twice everytime i reboot it,.... first reboot goes to recovery mode, and then reboot system now (thats my second reboot) and finally go to normal mode.
Does anybody have a simple solution to fix this?
Other than that problem, this CMW really helpful
Thanks
report a problem, friend:
when I start to load the smartphone off, there goes the animation of the battery charging and only I restarted the recovery, so there is no way that you can carry off.
Need help
Im trying to port CM11 to grand prime. anyone is willing to test it?
Grand Prime CWM 6.0 Download link
Tried to download CWM 6.0, but link is not working!!
Anybody has a working link?
Thanks
no, i installed in my device after install the recovery i rooted with the zip file with SuperSU
Can we flash .zip files ?
Good job
working in my Galaxy Grand Prime model sm G530h. i test today and is Great..Thanks
mquirox said:
Tried to download CWM 6.0, but link is not working!!
Anybody has a working link?
Thanks
Click to expand...
Click to collapse
Here,I search for 30 minute and finally found an russian forum that upload this
Just put it in odin and flash :good:
I dont flash it yet but the screen is the same as you described
GOOD!
GOOD work!
shadowfantom said:
Does it work on G530FZ???
Click to expand...
Click to collapse
I can confirm it's working on G530FZ
you have to download mega app make an account in this app then activate thats all
understud
Q&A for [KK][5.5.12]MIUI 6 for Samsung S4 I9500 Based on Stock Firmware Nk1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KK][5.5.12]MIUI 6 for Samsung S4 I9500 Based on Stock Firmware Nk1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey thanks before for making MIUI 6 can be operated in our lovely device
but i have question, is there any chance to installing gapps in this ROM?
thanks
are gapps included?
and I think there's a problem with the links!
one of them there's no MIUI 6 ROM the other I'm not able to download from!
Can i flash it over lollipop bootloader and modem
Without loosing imei and network
i flashed that miui version and gapps 4.4.2.
Problems: You can choose english but many parts of the rom stay chinese. But thats not the worst thing. Most annoying is, that you cant install apps from playstore because of insufficent storage.
p.s. i just flashed it over imperium LL rom with android 5.0.1 without problems
ı can't dowload rom ,can anyone share rom another place...
how to fix miui v6 5.5.15 play store insufficient space error !!!!
it's work for me 100 %%%%%%%%%
https://forums.oneplus.net/threads/miui-6-could-not-install-insufficient-storage-play-store-bug-fix.311975/
Nizar from Casablanca Morocco !!!!!
Hey,
I lost my IMEI after a Reboot. Anyone have an idea why that happend? After i flashed back to Imperium LL my IMEI worked again.
1. Repair Gallery sporadic FC
2. Fix music abnormal consumption
3. Repair operator display
4. Repair ringtones invalid issue
5. Update the video APP
6. Repair Local Backup
7. Repair transparent desktop search
Flashed it. still doesnt work. an you help me with the procedure??
Cool, so happy that it is sorted!! I love MIUI, but needed GAPPS. Mi App Store looks good, but it is too Chinese at present (English translation needed) !!
Can't Flash MIUI 6
I can't flash the MIUI.zip via Recovery .. i installed TWRP Recovery. it gives me error .. like "its for j3vg (or something like this) devices , your device is i9500.
iMenesi said:
I can't flash the MIUI.zip via Recovery .. i installed TWRP Recovery. it gives me error .. like "its for j3vg (or something like this) devices , your device is i9500.
Click to expand...
Click to collapse
Yes my device is I9500. I used Philz touch recovery, which I flashed using odin. Once you have the recovery installed, you just copy the zip to the SD card and flash from recovery after doing all the wipes.
Thanks man it solved the problem
gelie said:
Yes my device is I9500. I used Philz touch recovery, which I flashed using odin. Once you have the recovery installed, you just copy the zip to the SD card and flash from recovery after doing all the wipes.
Click to expand...
Click to collapse
Ok Bro, I'll try and give a feedback.
iMenesi said:
I can't flash the MIUI.zip via Recovery .. i installed TWRP Recovery. it gives me error .. like "its for j3vg (or something like this) devices , your device is i9500.
Click to expand...
Click to collapse
gelie said:
Yes my device is I9500. I used Philz touch recovery, which I flashed using odin. Once you have the recovery installed, you just copy the zip to the SD card and flash from recovery after doing all the wipes.
Click to expand...
Click to collapse
iMenesi said:
Ok Bro, I'll try and give a feedback.
Click to expand...
Click to collapse
Thanks alot Bro .. it worked. :good:
iMenesi said:
Thanks alot Bro .. it worked. :good:
Click to expand...
Click to collapse
Glad I could help...dont forget to install the google.apk (file is about 14mb), if you want GAPPS and then flash the google playstore fix (http://forum.xda-developers.com/showpost.php?p=60956726&postcount=84)
MIUI is cool.
Constantly restarts
The ROM is great but I have a problem using it happened one day but the next day constantly restarts, there will be a solution to that?
Thanks!!!
Eicov said:
The ROM is great but I have a problem using it happened one day but the next day constantly restarts, there will be a solution to that?
Thanks!!!
Click to expand...
Click to collapse
Try to wipe the cache and wipe the dalvik cache in recovery and then reboot...See if that helps.
Guys can you help me how to install this rom getting status 7 msg. Using twrp recovery and aurora 8.2