So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me
Hi,
I am trying to unroot my phone since 3 DAYS!!! :crying::crying::crying: and whenever I follow the steps it gets stuck at about 9% and says that it cannot connect to my phone. I have downloaded the drivers and my computer does recognize the device when I plug it in. I have tried windows 7 and windows 8.1. Does anyone have any idea?
It says:
CDC Serial : No driver found
MTP : No driver found
LGE Android Phone : No driver found
This only shows when the phone goes into the firmware update mode its at 0% and this comes up.
These are the steps I have taken:
1. Installed drivers
2. Downloaded .rar and supporting files
3. Installed the LG Mobile support tool
4. Installed the flash tool
5. Reboot in download mode..follow steps. Doesn't recognize phone is plugged in (even after you can hear it make the noise when I do plug it in to go to download mode)
I have followed the automatic .vbs script from XDA LG G2 Back to stock thread.
Thank you in advance!
Hi all,
My phone is bricked with following syptoms:
1) Not being recognised in download mode
2) Adb without root acess (unable to push files)
3) No recovery
Detailed problems
I have a (Korean) Lg G2 (F320s) and its stuck on bootloop. It goes into download mode with Vol + with plugging into computer but the computer doesnt recognise it as attached...no sound, nothing in device manager and no found by Lg Flashtools or Kdz updater.
When simply turning on i connect it to the PC it shows as an ADB interface device and i have ADB but no root authorization (my phone was rooted before).
Lastly when i try to enter recovery it just flashes a couple of times and goes black...back light still on. In this mode when i connect it to PC it shows up several drives and phone comes up as Qhsusb_bulk device. I read a thread using UBUNTU to repair this but it wont work for me....the PC just hangs up and Ubuntu is unable to mount the drives (Even after the settings from Dconf Editor).
Please help i have been stuck for days
Please help
Please help ppl... is there a possible solution to the problem..?? JTAG maybe??
Hi all,
Maybe someone find a solution...current issues
Phone is LG G2 D802 32GB
1.Only LG Logo is visible while phone is powered on
2.I can turn on download mode but it's not work on pc (device is not recognized)
3.Recovery Mode not available
4.I can do a factory reset but nothing happens
5.ADB,Fastboot device not found (Trying various drivers for connecting to pc)
6.When I connect phone to PC is recognized as LGE Mobile USB Serial port
7.in LG Flash Tool 2014 I can do something.Changed port to 41 in device manager.Yesterday when I tried to flash it was typing "Model information check failed"
I think I've tried everything any help pls?
No one
help
i have the some problem help please:crying:
I'm able to start software update in LG Mobile support tool via Flash tool (KDZ Method) only up to 4% and only while CSE Flash / CDMA is checked then I've got an some error which I can't read due to bad letter format.Maybe it's because I'm not in download mode, but in normal mode (only way to recognized by pc as LGE USB MODEM)?
starshar said:
i have the some problem help please:crying:
Click to expand...
Click to collapse
Maybe I've found a solution here .I will try this method soon...
Hey there guys!!!
Can you please help me with this?
Yesterday i tried to install a new ROM on my LG Android phone (My LG phone is not working properly, it has a reboot loop). I tried to do a factory reset without success -> the dead Android logo appeared :/
I put my phone in Download Mode and connected to the pc but Windows does not recognize my phone.. it says: "USB device not recognized.. the last USB device you connected to this computer malfunctioned and Windows does not recognize it"
I do not know what to do now.. when i try to flash a ROM with the LG Flash Tool it fails because LG program does not recognize my device..
PS: LG Support Tool recognizes my phone (it shows the model) but i cannot flash a ROM
Thanks!!:fingers-crossed: