Hey guys,ever wondered how you will get w10 on your pc w/o the necessary earlier updates or too impatient to wait for the update to be Downloaded?Here's the catch.
1)Make sure you're on an ELIGIBLE windows version (7-8.1) and not on Windows RT or enterprise.
2)Check what bit architecture your Pc is,either 32 or 64.
3)If you have checked everything,now,download the Windows 10 media creation tool from here: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install based on your bit architecture
4)Open up the executable file as administrator and click Upgrade now
5)It will now show Downloading win10 and followed by creating media.If you want to speed up the process,just connect a LAN cable to your modem ��
6)It will show preparing... Just sit back and relax
7)Now it will say checking for updates and the end-user licence agreement.
8)Just click accept and choose what files you want to keep
9)It will check for updates again and the confirmation for installation pops up.Click OK.
10)Now,it shows installing windows 10 and once that's done,it will show 'Your Pc will reboot in a few moments' Don't panic if as it takes 20-35 mins.
11)Now it will reboot into Windows installation mode from copying your files to configuring settings.
12)All done!Hooray!Just set up your account and it will check for updates.Then,YOUR'E Free to use your 'new' and definitely improved ( In my opinion) Pc!
EDIT:All step-by-step pictures are listed in the comments section below for steps 4-12
Please push the THANK button if I have helped you!It motivates me to make more guides on the forum!80 views but none yet?
*GUIDE NO LONGER UPDATED DUE TO DEV RETIREMENT*
Oops grammatical error at 10)as it takes...
and also at 11)Now... And 12,Everything...improved ?PC sorry for my poor English
Sent from my C2105 using Tapatalk
Oh yes,if anything goes wrong duting the process and if you point your finger at me I will laugh at you.I have tested this guide myself and it works but I can't guarantee it works for everyone!
Sent from my C2105 using Tapatalk
Oops grammatical error again,during
Sent from my C2105 using Tapatalk
Connect pc and modem/router preferably the modem ?
Sent from my C2105 using Tapatalk
To check bit architecture in both win 7&8.1,
1)go to your file manager
2)Right click on 'my computer'
3)Click on properties
4)Both windows version,(eg,Rt or home premium),pack(service pack 1.../8.1)
Bit architecture (32 or 64)
Will be displayed.
Sent from my iPhone 2000
Here are the images for all steps from step 5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6)
7)
Sent from my iPhone 2000
7)
Previous image is step 9
10)
And finale
Sent from my iPhone 2000
With thanks to tenforums.com for one of the images!
Sent from my iPhone 2000
This is for the windows 10 final version and NOT the technical preview.
Sent from my iPhone 2000
Related
Hi!
Do you know if there is a working x86 emulator for our pocket PC devices?
I don't need speed, just compatibility. I'd like to use some special tiny program, that was written for windows 95, on my Wizzard.
I know some guys were installing some old "ordinary" windows on pocket pc devices, so there should be hope for me?
any information welcomed.
greetings from slovenia!
Admit it, you just want to play Star Flight.... I miss that game
Mamaich has a working version of Bochs I think, on his website. However, I don't think you'll get windows installed.
Where have you seen old windows binaries running on the PDA?
V
Veloxi on the WM platform...I'd buy that for a dollar!
I just have to add this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this:
V
I saw a russian site where they guy had a dos emulator. but I do not belive it emulated the hardware needed for Win95. You are better off with a terminal service session on WinVNC, which I ise from my phone to a server in my data center.
I found this site (in German) showing pics of working windows 95 on a PPC:
http://people.freenet.de/renmi/ppc/
now we just have to find some manual describing how to do that
best
LOL...that looks cool but man, that has to be slow! Should be interesting to see what comes of it.
Guys, you can see that it says that it uses Bochs. As I said above, I think Mamaich has a release of it, or at least it should be generally available. That's a free, open source x86 emulator.
V
bochs - failure
hi. I am trying to play with bochs and dlxlinux
I have downloaded everything needed [except bochscr.txt - cant find it] but I think bochsrc.bxrc included with dlxlinux is good for me.
when I try to run it from dos box [functionality of pocket contoller] cpu grows to 100% for 1-2 sec and falls back to normal[0-3%].
every configuration I try cause same effect. on dos box nothing happens. no log produced [it is in configuration].
any ideas? anyone tryed it with success?
I run it with ..\bochs -q -f bochsrc.bxrc. ofcourse all files are correct.
Files are from http://mamaich.uni.cc/fr_pocket.htm
SEE POST #3 FOR SOLUTION
I'm having an issue I can't get past..
I've got the Indonesian 2.2.2 rom on my Australian (Telstra) device (external sd, 2 cameras, resistive)
I'm using goodoane's v2.2 compatable CWM, and xaueious's easy windows flasher. The phone is rooted using superoneclick, and all drivers are installed fine. It process through all the steps until the following one with no problems.
Trying to install , but get the following error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you see it says FAILED <data transfer failure <too many open files in system>>
I cannot figure out a way to get around this. Using the easy windows install script. Please help!
Downgraded to 2.1 and tried the same with 2.1 img. Exact same error. Someone please help :/
OK, so I figured it out.
The drivers weren't installing properly on either of my windows 7/intel core 2 duo systems. So, I hooked the tablet up to me Windows 2000 torrent box, and the huawei drivers installed fine.
I was able to root through that computer, but as seen above I was unable to flash CWM.
So, after more tinkering, I became dedicated to fixing the drivers on my Windows 7 computers.
I copied the driver info from my Win2000 box, and then plugged the tablet into my Win7 PC.
Instead of using the 'update driver option' by pointing the computer to a specific location (where the huawei drivers were), I selected 'have disk', and then did that.
The drivers for 'Win7&XP' were still not working, so I decided screw it, and pointed the computer to the 'Win7-AMD' drivers using the have disk option. I specified the correct INF (as seen in driver details from the Win2000 box), and to my surprise it installed correctly!
I then enabled USB debugging, and followed the exact same process; pointing my computer to the Windows 7-AMD drivers as opposed to the Win7&XP drivers, even though I have an intel CPU. It worked.
I then flashed CWM onto my Tablet with the stock 2.1 rom. I'm now upgrading to indonesian 2.2 and will flash the appropriate 2.2 version of CWM, which i'm sure will work.
Hope this helps someone out there!
Okay, I am trying to redeem this code from which I will be able to download Windows 8 for $14.99.
But when I run the Upgrade assistant, I get this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am running Windows 8 RTM, I know that RTM is the reason why it doesn't work as I need Windows 7. But since I don't have any Windows 7 PCs at home, how can I redeem my code?
Cheers
H-Streety said:
Okay, I am trying to redeem this code from which I will be able to download Windows 8 for $14.99.
But when I run the Upgrade assistant, I get this.
I am running Windows 8 RTM, I know that RTM is the reason why it doesn't work as I need Windows 7. But since I don't have any Windows 7 PCs at home, how can I redeem my code?
Cheers
Click to expand...
Click to collapse
I'm sorry, I think Windows 8 isn't very good, but i may be able to help you...
The computer you are trying to use probably came with Windows 7, right? So, back up your data and reinstall Windows 7, then install Windows 8 and put back your data.
Yes, I know that this is tedious, but it will work.
x10knight said:
I'm sorry, I think Windows 8 isn't very good, but i may be able to help you...
The computer you are trying to use probably came with Windows 7, right? So, back up your data and reinstall Windows 7, then install Windows 8 and put back your data.
Yes, I know that this is tedious, but it will work.
Click to expand...
Click to collapse
troubelschout complicatie or whatever its called then try recomended setting xp sp3 and voila it works.
had the same problem on windows 8
If you do a clean install of W7 and upgrade that to 8, that would be a clean install and most likely run better than having all of the programs from Release Preview leave back files that mess with the Final Copy
I had RTM, so basically final build. Thanks to ****rbeer I have managed to get a product key out of that program.
I had installed windows 8 pro with clean install ... No problem at all...
Running fine...
i tried to flash drivers i get this errer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on android l v12 , my device is note 3g
i tried to flash new offical miui6 via twrp 2.8 i got error
and wiped data,system etc...
so i am not able to enter recovery and even into rom what to do??
Please Help ME
It seems a problem with Windows rather than with your phone.
First of all don't worry, there are very high chances that you will recover the phone in working state. I worked for over a year with MTK devices, they brick very easily but it's also easy to unbrick.
It's a signature error, not a driver error. I remember Windows has somewhere the option to disable signature checking for drivers. Disable it, then after installing this driver you can re-enable it if you want.
I assume you are able to proceed from this step on, once phone is recognized by PC. If I'm wrong, feel free to ask
To Install Driver without Signature error.
This will Help u to install driver without signature.
What to do:
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings).
2.Click More PC Settings.
3. Click General.
4. Under Advanced Startup, click Restart Now.
NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot.
6. Click Advanced Options.
7. Click Windows Startup Settings.
8. Click Restart.
9. After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
10. After restarting, you will be able to install the drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway.
You are now complete. I hope this will help you. Good Luck..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you ever gotten this error?Here's the solution
As a first try,reboot your Pc and try again.If the problem persists,
Try this:
1)Right-click on the windows logo and click 'run'.
2)type 'services.msc' and push enter
3)Scroll down to windows update and double tap
4)Now,change the default setting of Manual to either automatic or automatic(delayed start)
5)Hit apply
6)Scroll up to windows store and tap once
7)Now click 'start'
8)Make sure both windows update and store display 'running'
9)Now restart your windows store and the problem SHOULD be fixed
10)If it still persists,surf the web for other solutions.If they too don't work,contact the Microsoft help center.If they can't help you either,unfortunately you MAY have to perform a factory data reset.(Do remember to take a backup)
This solution was crafted by me and works for my pc but it may not work on yours so don't blame me if something happens to your pc(highly unlikely).
*GUIDE NO LONGER UPDATED DUE TO DEV RETIREMENT*
Sent from my iPhone 2000
this will help you but if you previously disabled this settings to prevent windows update from downloading automatically, you caught server stumbled.
you have no choice but to start windows update.
Actually,I don't think any of the windows apps work with that disabled.Correct me if I'm wrong!
PAPalinskie said:
this will help you but if you previously disabled this settings to prevent windows update from downloading automatically, you caught server stumbled.
you have no choice but to start windows update.
Click to expand...
Click to collapse
yes. indeed. i try to modify the registry where windows update is there but i've got troubled when i try to access windows store and microsoft account log-in. therefore, activating by delay from services will also help to access windows store.
PAPalinskie said:
yes. indeed. i try to modify the registry where windows update is there but i've got troubled when i try to access windows store and microsoft account log-in. therefore, activating by delay from services will also help to access windows store.
Click to expand...
Click to collapse
Precisely.I wish Microsoft stopped forcing people to use their windows update!
Sent from my Xperia L using Tapatalk
i wish it too... i've got throttled with my mobile data when windows updates starts. how microsoft is stupid when it comes on mobile internet consumption.
Exactly.I hope they change this in the rumoured service pack.
Sent from my Xperia L using Tapatalk