Hello
i have Verbatim Store n Go Nano Silver/Black 16GB USB 2.0 Flash Drive with Micro USB Adapter and i tried connect it to Huawei Y625 but it not recognized and i donot know the reason !
but when i try connect it to HTC it work fine -.-" !
Any Help please , is there a settings for it to work or an application for it to work !
Related
hi guys
i am new to this so apprecaite your help.have been using my xda exec for about a firthinte brilliantly.however since yesterday ,when i plug the usb cable to pda nothing is happening,fone is not being recognized by pc.i tried different cables and diferent pc's to no avail.the pda does not even charge via usb cable.
however it charges normally via wall charger.
do you think I bust the connector,could it be fixed?
hi heres what you can do to see it your usb still works
1. have a storage card sd/mmc if you dont have one borrow one
2. download softtick 2 from http://www.megaupload.com/?d=YPH5DW4I or wm5storage you choose
3. connect your pda with softick installed
4.press the usb option and the sd card should display as a normal flash drive
5.if the computer recognizes it and picks it up as a flash drive then you definatly know it works properly
6. if it doesn't then you can hard reset your pda
7:if that still dont work then consult a techniian or a guru to help you open it
hope this helps!
Hi
I'm trying to enable USB Host on my Nexus 7 but I fail !
I have this cable : SANOXY USB 2.0 A Female To Micro B Male Adapter Cable (Micro USB Host Mode OTG Cable)
http://www.ipmart.com/usa/product/S...B,Host,Mode,OTG,Cable,,352598.php?prod=352598
I need to connect a flash drive formatted to FAT32
I have rooted it
I tried a lot of app from play store ..
Any suggestion ?
BLiTZTN said:
Hi
I'm trying to enable USB Host on my Nexus 7 but I fail !
I have this cable : SANOXY USB 2.0 A Female To Micro B Male Adapter Cable (Micro USB Host Mode OTG Cable)
http://www.ipmart.com/usa/product/S...B,Host,Mode,OTG,Cable,,352598.php?prod=352598
I need to connect a flash drive formatted to FAT32
I have rooted it
I tried a lot of app from play store ..
Any suggestion ?
Click to expand...
Click to collapse
It sounds like all you have left to do is download (root) StickMount from Play store. That's all I had to do. Hope this helps. Enjoy!
I think my cable do not have 4 and 5 pins connected
Try using one of these : http://forum.xda-developers.com/showthread.php?t=1812609&highlight=otg
I just recieved a USB adapter that I bought from eBay ( http://www.ebay.ca/itm/200864679193?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )
I have tried connecting a few USBs but none of them are working. It just says USB Connector connected. When i connected a logitech controller it gave me an error message that it was a high powered device. Not sure if there is something wrong with the adapter or if I need to instal additional drivers/apps to help with the mounting, or maybe change a few settings.
Can anyone verify if they can mount USBs on JB?
Sent from my GT-N8010 using xda app-developers app
Nvm, I got it to work. Found a clue on a different seller's ebay page.
All you need to do is connect the cable to your device and restart it. Once it restarts, take off the cable and connect the desired USB device and connect the cable back.
Also, make sure your USB is formatted as FAT32.
This is what I found on the web:
" By default the Android device supports the FAT32 format only. If your flash drive is in NTFS
format, it will be seen as a blank drive.
For the first time to use the OTG cable, please connect the cable with your phone and restart the
phone. (Before you use USB devices to connect your phone, please firstly connect the USB
devices with the cable, then connect your phone.)
When you need to change USB devices, please unplug the OTG cable from mobile phone firstly,
then change USB devices, and plug in your phone."
I have blade L3.when i connect micro usb flash drive nothing happents.can someone help me;what can i do to find my mobile the micro usb;
No usb drive support!
the ZTE BLADE L3 has no usb Otg Support i tested some
sollutions tht culd work but nope !
Usb Otg is not possible because hardware.
Hi everyone,
just purchased my redmi pro with miui 8.0.4.0. working great!! only noted that the OTG function is not working. does not detect my thumbdrive despite using adapter for usb type c and formatting thumbdrive to fat32.
file transfer via pc works well.
is it because the miui not being original?
please help.
thank you
working now
now working. Had to purchase Remax usb 3.0 to type C to work. don't buy non branded adapters.
Shafriefmai said:
now working. Had to purchase Remax usb 3.0 to type C to work. don't buy non branded adapters.
Click to expand...
Click to collapse
ive used the remax as well its a great adapter