[GUIDE] Install CloudyG2 3.3 on VS980 - G2 Q&A, Help & Troubleshooting

First of all I'd like to thank the following forum members for their contributions:
@Zackptg5 and @megaghostgamer for their basic steps
@xdabbeb for his bootstack
Major thanks to @Cloudyfa for his amazing ports!
I've compiled their steps into a very user friendly guide with all downloads in one place.
I recommend TWRP for the procedure. Any version 2.7.0.0 or above should do.
First of all, you need these files:
Dorimanx 3.9.2 kernel vs980 (Make sure you download the kernel for the VS980)
Aroma Patch Fix
CloudyG2 3.3
xdabbeb's vs980 39a bootstack
Then, follow the steps carefully. I am not responsible if this didn't work for you as it did for me.
Backing up is recommended, nandroid or data backups.
Boot your phone into TWRP. (Recommended method is going to recovery after turning off the device)
Wipe everything except internal storage.
Flash Xdabebbeb's VS980 39A bootstack.
Reboot the device into recovery (there should be an option for this in the reboot section of TWRP).
Flash CloudyG2 3.3 and make sure you select your variant as VS980. Make sure you uncheck the reboot option at the end of the installation.
Flash the Aroma Patch Fix zip, and select your variant as VS980. Make sure you uncheck the reboot option at the end of the installation.
Flash the VS980 39A bootstack once more.
Flash the Dorimanx 3.9.2 kernel zip.
Wipe cache/dalvik cache.
Reboot the device to system.
Notes:
First boot usually takes awhile. The pulsing LED will show up for a long time with the LG Logo.
Mobile Data does not work unless you enable data roaming.
Please hit that thanks button if this guide helped any of you! Any questions, just post down below.

I have followed everything as it has been mentioned in the guide.
When i rebooted the system in the end, LG logo appeared for a second and then black screen with [880] Fastboot mode started.
now what should i do ? its just stuck here.

Shujja Haider said:
I have followed everything as it has been mentioned in the guide.
When i rebooted the system in the end, LG logo appeared for a second and then black screen with [880] Fastboot mode started.
now what should i do ? its just stuck here.
Click to expand...
Click to collapse
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981

Zackptg5 said:
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
oh yes.. my bad.. the kernel was mistakenly downloaded from LS980 instead of VS980. again followed the process and it is starting up.
lets hope reception problem is fixed.

Shujja Haider said:
oh yes.. my bad.. the kernel was mistakenly downloaded from LS980 instead of VS980. again followed the process and it is starting up.
lets hope reception problem is fixed.
Click to expand...
Click to collapse
Easy mistake to make (I did that too once). It'll say you're roaming, but that's just a weird bug. Go into networks setting and enable data while roaming and it'll work fine. You're not actually roaming so you won't get charged for it.

Oh well. Added an extra precaution next to the download link.

Zackptg5 said:
Easy mistake to make (I did that too once). It'll say you're roaming, but that's just a weird bug. Go into networks setting and enable data while roaming and it'll work fine. You're not actually roaming so you won't get charged for it.
Click to expand...
Click to collapse
I did everything correctly now .. even the enable data while roaming is checked.
I am receiving a few bars of reception but neither i am able to receive calls or make calls .. first time there was message emergency calls only but now .. nothing ..
very rarely calls or messages are received while most of the time .. just nothing .. no incoming or outgoing

Shujja Haider said:
I did everything correctly now .. even the enable data while roaming is checked.
I am receiving a few bars of reception but neither i am able to receive calls or make calls .. first time there was message emergency calls only but now .. nothing ..
very rarely calls or messages are received while most of the time .. just nothing .. no incoming or outgoing
Click to expand...
Click to collapse
These things also happened to me
My phone is unusable now
Even after i restored my backup from twrp
Please anyone

How you cell is unusable now?
I am not able to access to network.. No data connection at all.. Other than that.. Charging is seriously slow...
Sent from my VS980 4G using XDA Free mobile app

Shujja Haider said:
How you cell is unusable now?
I am not able to access to network.. No data connection at all.. Other than that.. Charging is seriously slow...
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
Flash xdabbebs rom: http://forum.xda-developers.com/showthread.php?t=2715408
It is stock with some tweaks, g3 ported apps and such. If you still have these issues, it's likely a hardware issue

You mean I should not use cloudyG2 3.3?
But if it is hardware issue then why I was not facing it other ROMs?
Sent from my VS980 4G using XDA Free mobile app

Shujja Haider said:
You mean I should not use cloudyG2 3.3?
But if it is hardware issue then why I was not facing it other ROMs?
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980

Zackptg5 said:
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980
Click to expand...
Click to collapse
No i had signals issues before and in this room the issue seemed to have worsen but i think its okay .
but the real issue now is .. extremely extremely slow charging .. even tweaking the kernel with fast charging at 2000mAH.. its such a lazy charging .. you can imagine .. for more than 2.5 hours, the charging has just been moved from 12% to 34%.
not using at all .. only charging .. how to resolve this issue ??

Shujja Haider said:
No i had signals issues before and in this room the issue seemed to have worsen but i think its okay .
but the real issue now is .. extremely extremely slow charging .. even tweaking the kernel with fast charging at 2000mAH.. its such a lazy charging .. you can imagine .. for more than 2.5 hours, the charging has just been moved from 12% to 34%.
not using at all .. only charging .. how to resolve this issue ??
Click to expand...
Click to collapse
Try uninstalling the apps installed with dormant kernel (color changed, synapse, dorimanx kernel settings) forget the names for them but you'll figure it out. Then flash xdabbebs stock kernel (permissive): http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
If the slow charge is still present, then it's likely a hardware issue. Sounds like you need a new phone with all of the problems you're having. Have you tried cleaning out the charging port with compressed air?

Zackptg5 said:
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980
Click to expand...
Click to collapse
Zackptg5 said:
Try uninstalling the apps installed with dormant kernel (color changed, synapse, dorimanx kernel settings) forget the names for them but you'll figure it out. Then flash xdabbebs stock kernel (permissive): http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
If the slow charge is still present, then it's likely a hardware issue. Sounds like you need a new phone with all of the problems you're having. Have you tried cleaning out the charging port with compressed air?
Click to expand...
Click to collapse
you probably are right that i might need a new phone but i had just got this one and charging was okay with kitkat based ROMS.. like i was using CloudyFlex before and no issue but only with this rom i had this issue. and I had not tried compressed air cleaning at all .. i think i must consider changing the kernel .. it might save the issue..

Zackptg5 said:
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
Where did you get that version of Dorminax or can you use a later version of that Kernel

Shujja Haider said:
you probably are right that i might need a new phone but i had just got this one and charging was okay with kitkat based ROMS.. like i was using CloudyFlex before and no issue but only with this rom i had this issue. and I had not tried compressed air cleaning at all .. i think i must consider changing the kernel .. it might save the issue..
Click to expand...
Click to collapse
I'm thinking that the first install of the wrong kernel did some stuff.
Try backing up your stuff, using LG Tool to restore back to stock, and retry the procedure. I'm coming straight off of Resurrection Remix 5.1.1 and I've had no issues with this ROM. Data works without enabling Roaming too.

TheSkilledPlaya said:
I'm thinking that the first install of the wrong kernel did some stuff.
Try backing up your stuff, using LG Tool to restore back to stock, and retry the procedure. I'm coming straight off of Resurrection Remix 5.1.1 and I've had no issues with this ROM. Data works without enabling Roaming too.
Click to expand...
Click to collapse
LG Tool doesnt take me back to stock.. i have to manually flash stock ROM for this ..
actually I had mentioned before, i was already facing severe signals issues and not to forget, GPS is also faulty.
so might be hardware issue that is continued in this ROM too.
But what has been added is .. extremely slow charging .. charging is totally dead.
Using Dorimanx Kernel v 4.6.
even enabled fast charging at 1800 but no effect at all ..

Shujja Haider said:
LG Tool doesnt take me back to stock.. i have to manually flash stock ROM for this ..
actually I had mentioned before, i was already facing severe signals issues and not to forget, GPS is also faulty.
so might be hardware issue that is continued in this ROM too.
But what has been added is .. extremely slow charging .. charging is totally dead.
Using Dorimanx Kernel v 4.6.
even enabled fast charging at 1800 but no effect at all ..
Click to expand...
Click to collapse
I thought my guide mentioned version 3.9.2..
Well if this ROM doesn't work out for you, stay on CloudyG2 2.2. It's the most stable ROM we have for our VZW G2 out there.

TheSkilledPlaya said:
I thought my guide mentioned version 3.9.2..
Well if this ROM doesn't work out for you, stay on CloudyG2 2.2. It's the most stable ROM we have for our VZW G2 out there.
Click to expand...
Click to collapse
I think so its not working out well .. though i have loved it .. its interface and everything but i have faced so many issues and now i am observing videos are not being played at all ..even tried installing MX Player but same issue..
tonight i am going to flash debloated Stock lollipop cuz i want to use LP .. if it doesn't work out .. then i will revert back to CloudyFlex cuz that was working fine too ..
CloudyG2 and CloudyFlex.. are they the same or different .. i am sorry for my ignorance but these both roms were downloaded by one of my friend so I didn;t keep a check..

Related

Many problems with 4.4.2 on Nexus 4

Hey guys, I've been having A LOT of issues with the new updates. First the 4.4 and then the 4.4.2 that didn't solve a thing. I've installed them via OTA but after that i've already did:
- factory reset
- installed via fastboot 4.3, then updated via OTA to 4.4.2
- installed via fastboot 4.4, then updated via OTA to 4.4.2
- factory reset AGAIN - installed via fastboot 4.4.2.
I don't know what do to anymore! I can't take pictures because nexus just turns off the moment i take one. I can't install facebook, twitter or instagram and another random apps... And btw, is it normal that in 10 minutes the battery charges to 1% to 50%? i think i never noticed that...
BUT WHAT DO I DO? PLEASE HELP!
UPDATE:
This problem is solved, it was the battery. I've changed the screen recently and it needed a new battery too. Thanks to everyone that tried to help me
just flash the factory images for 4.4.2 via fastboot
Sent from my Nexus 4 using XDA Premium 4 mobile app
saifulh2304 said:
just flash the factory images for 4.4.2 via fastboot
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how do I do that? sorry but I'm a little noob.
maznex said:
how do I do that? sorry but I'm a little noob.
Click to expand...
Click to collapse
follow the guide here: http://rirozizo.blogspot.com/2013/11/guide-how-to-flash-factory-images-from.html
maznex said:
how do I do that? sorry but I'm a little noob.
Click to expand...
Click to collapse
If you don't know how to use fastboot, use the Wugfresh toolkit, makes life very easy. It has the drivers, downloads recoveries, root files and the factory images. Really is easy with that.
Riro Zizo said:
follow the guide here: rirozizo.blogspot.com/2013/11/guide-how-to-flash-factory-images-from.html
Click to expand...
Click to collapse
maritimesbob said:
If you don't know how to use fastboot, use the Wugfresh toolkit, makes life very easy. It has the drivers, downloads recoveries, root files and the factory images. Really is easy with that.
Click to expand...
Click to collapse
Guys, like I said I used fastboot to install 4.4.2, it still didn't work. I followed this guide googlenexusforum.com/forum/nexus-4-roms/4046-guide-flash-stock-option-using-android-sdk-tools.html
Hey, guys, I haven't updated it to 4.4.2 yet cause my phone is rooted so I'm asking is it worth to go through all the process again? And if yes can anyone state the new features? ☺ thx a lot!
Sent from my Nexus 4 using XDA Premium 4 mobile app
Looks like a hardware issue to me. Probably your battery is faulty... Could explain the shut downs and trying to use the camera usually drains more battery so again that could it be. Could you be more specific about the other errors that you get?
Sent from my Nexus 4 using xda app-developers app
evdrmr said:
Looks like a hardware issue to me. Probably your battery is faulty... Could explain the shut downs and trying to use the camera usually drains more battery so again that could it be. Could you be more specific about the other errors that you get?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Hardware? It started to happen only when I updated the first time via OTA to 4.4.
I open the camera, I try to take a picture, the flash goes on and then the phone goes off. Sometimes I can turn it on and the battery it's the same, sometimes I can't turn it on without connecting to the charger because it goes off when I go to insert the PIN.
Well, after I understood that the problem was that apps, when I turned the WI-FI on, the phone immediately turned off after that I unistalled that apps and when I turned the WI-FI on I could go on Chrome and Play Store, and installed some apps (like n7 player) and everything was OK.
One time I installed Twitter and I used it for a bit and everything seemed fine but then I installed Facebook and the phone crashed again so I unistalled both. Same with Instagram.
I don't know how much more specific I can be... I really need help :s
it's not hardware. anyone who had this phone running pre 4.3 aosp will remember the camera issues and the clicking noises that went along with the focusing and then the reboots. the battery charging is also a widely experienced issue as well as going from a full charge to 50% in a few minutes. I'm getting the camera bug again on 4.4.2 hope a .3 build pops up soon to deal with it. I'm also 100% stock no root
aaronrw said:
it's not hardware. anyone who had this phone running pre 4.3 aosp will remember the camera issues and the clicking noises that went along with the focusing and then the reboots. the battery charging is also a widely experienced issue as well as going from a full charge to 50% in a few minutes. I'm getting the camera bug again on 4.4.2 hope a .3 build pops up soon to deal with it. I'm also 100% stock no root
Click to expand...
Click to collapse
exactly this is happening but on 4.4.2
BTW, when I'm charging the phone, none of this problems happens. I can install and use all apps and use the camera.
maznex said:
exactly this is happening but on 4.4.2
BTW, when I'm charging the phone, none of this problems happens. I can install and use all apps and use the camera.
Click to expand...
Click to collapse
if I were having all those issues I'd try installing the Factory Image again or maybe try 4.4.1 and then use the OTA to update. BUT there is definitely some bugs in the latest KK release
aaronrw said:
if I were having all those issues I'd try installing the Factory Image again or maybe try 4.4.1 and then use the OTA to update. BUT there is definitely some bugs in the latest KK release
Click to expand...
Click to collapse
I did all of that as I refered in the beggining... I will try to install 4.4.1 though, that was the only thing I didn't do, but I doubt it's gonna work, because installing 4.4 and 4.4.2 didn't solve a thing
sorry about the double post but there isn't the factory image for 4.4.1 here... https://developers.google.com/android/nexus/images#occamkot49h .
I tried to flash 4.4.2 following this guide http://rirozizo.blogspot.pt/2013/11/guide-how-to-flash-factory-images-from.html and when I turned it on I had no signal.. what does that mean? I guess it didn't worked..
maznex said:
sorry about the double post but there isn't the factory image for 4.4.1 here... https://developers.google.com/android/nexus/images#occamkot49h .
I tried to flash 4.4.1 following this guide http://rirozizo.blogspot.pt/2013/11/guide-how-to-flash-factory-images-from.html and when I turned it on I had no signal.. what does that mean? I guess it didn't worked..
Click to expand...
Click to collapse
The latest factory images are 4.4.2, that's why you didn't see 4.4.1 on Google's server. When you flash factory images, your radio will also be updated. When you flash a custom ROM, your radio doesn't get updated, that's why you had problem with cell signal. Or flash the appropriate radio for the ROM.
taodan said:
The latest factory images are 4.4.2, that's why you didn't see 4.4.1 on Google's server. When you flash factory images, your radio will also be updated. When you flash a custom ROM, your radio doesn't get updated, that's why you had problem with cell signal. Or flash the appropriate radio for the ROM.
Click to expand...
Click to collapse
The phone asked me to insert PIN and then I had cell signal again.. Should I flash 4.4.2 again flashing the radio too? Because I have the feeling that this will not solve my problem. Like I said in the beggining I followed another guide to flash my phone, and in that guide it said to flash radio and "bootloader-mako..." (not sure what that is) and the cell signal problem still happened and then I couldnt install Facebook or Twitter or had my location on or using the camera without the phone turning off or rebooting...
EDIT: The phone just turned off when updating Google apps, so yeah... Didn't work :s
maznex said:
The phone asked me to insert PIN and then I had cell signal again.. Should I flash 4.4.2 again flashing the radio too? Because I have the feeling that this will not solve my problem. Like I said in the beggining I followed another guide to flash my phone, and in that guide it said to flash radio and "bootloader-mako..." (not sure what that is) and the cell signal problem still happened and then I couldnt install Facebook or Twitter or had my location on or using the camera without the phone turning off or rebooting...
EDIT: The phone just turned off when updating Google apps, so yeah... Didn't work :s
Click to expand...
Click to collapse
You said that when a PIN is input, the phone has signal again which means it's not a radio issue. Did you set up a PIN in the security section in your phone?
taodan said:
You said that when a PIN is input, the phone has signal again which means it's not a radio issue. Did you set up a PIN in the security section in your phone?
Click to expand...
Click to collapse
No this is just something that started to happen along with the other problems... Sometimes the phone loses signal for no reason and goes to the PIN input screen.
maznex said:
No this is just something that started to happen along with the other problems... Sometimes the phone loses signal for no reason and goes to the PIN input screen.
Click to expand...
Click to collapse
Which radio are you using? It should be .98 if you are on KitKat 4.4.2. You can flash a standalone radio zip file in recovery.
taodan said:
Which radio are you using? It should be .98 if you are on KitKat 4.4.2. You can flash a standalone radio zip file in recovery.
Click to expand...
Click to collapse
I don't know I will check later because now I'm not home. But when can I find that zip file and if I flash that it will only solve the cell signal thing right?

loss vibrat in i9500

Hello every one ...I got new problem in my new phone s4 i9500 ..suddenly loss vibrat touch during using the phone in custom rom ...I flash sokp at first custom rom and got that issue then flash hassan rom based on stock at first flash the issue present but flash it again and then work after that flashed aicp rom and after some days today the vibrat gone even in recovery mode ...what can be the problem ? My phone still new 1month ago ..can it be from kernal philiz ?? Thanks for any suggestion
any suggestion or throw my phone from window ......software or hardware problem ?????
Hi Ammar,
I think your problem is in software. If I were you, I install cwm or twrp recovery, do all wipes including system, preload and internal memory, then flash the latest official firmware with Odin. If problem stands still, I do all wipes agaün and install the latest official firmware again. Even if this is does not work then I decide the problem is hardware based.
abdullahmk said:
Hi Ammar,
I think your problem is in software. If I were you, I install cwm or twrp recovery, do all wipes including system, preload and internal memory, then flash the latest official firmware with Odin. If problem stands still, I do all wipes agaün and install the latest official firmware again. Even if this is does not work then I decide the problem is hardware based.
Click to expand...
Click to collapse
thanks for reply my friend ...i will try by odin and see
Software problem mate.
Try coming back to the stock rom and revert.
It should work on the stock rom.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Software problem mate.
Try coming back to the stock rom and revert.
It should work on the stock rom.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
thanks ..i will try surly but what can be the problem from cm based custom roms or from apks if you know about that
ammarsg said:
thanks ..i will try surly but what can be the problem from cm based custom roms or from apks if you know about that
Click to expand...
Click to collapse
Well I cant comment on what went wrong.
I was on slim rom once and my vibration Intensity was tooo too low. Because of that was missing calls.
Or you can download an app for checking vibration. Once my proximity sensor and speaker stopped working, i ran a test and everything was back to normal.
Try test you android from the playstore and see if that test works.
Well here is the app
But again as I said, let us know if this is happening on the stock rom.
Sent from my GT-I9500 using XDA Free mobile app
Once my Wi-Fi stopped working on a Cyanogenmod based rom. I flased stock firmware many times but it didn't work. Then I installed cwm recovery and do all wipes then it worked. As you understand, such wierd things might happen sometimes that we couldn't understand.
i sent my phone to company and told me that vibrate engine is broken and they change it and now work good but what is the problem that caused this i dont know exactly ...as they said either by drop the phone or by water but non of these happend with my new phone
thanks guys for help
ammarsg said:
i sent my phone to company and told me that vibrate engine is broken and they change it and now work good but what is the problem that caused this i dont know exactly ...as they said either by drop the phone or by water but non of these happend with my new phone
thanks guys for help
Click to expand...
Click to collapse
We are human being and as you know human is not perfect. So anything produced by human is not perfect naturally. If you could't find a reason for fault of a device then this is the only and certain reason :laugh::good:

[Q&A] [AOSPA 4.4.4 KTU84P] ParanoidAndroid 4.4+ G2 [06/28]

Q&A for [AOSPA 4.4.4 KTU84P] ParanoidAndroid 4.4+ G2 [06/28]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
NEO2598 said:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
Click to expand...
Click to collapse
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
MeestaAytch said:
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
It has been stated in the ROM thread multiple times that you must use a 4.2 STOCK JB MODEM for best compatibility. Any other modems you guys use is solely at YOUR OWN DISCRETION. @MeestaAytch they should know what to use at this point but thanks for clarifying again for those who don't want to search before posting :highfive:
@jakew02 no problem. I know it's tiring repeating the same information but from what I've seen in my time using XDA.... It'll never change.
I'm glad you devs still continue doing what you're doing for us though knowing this nonsense goes on.
Sent from my LG-LS980 using Tapatalk
A few bugs
Hi,
The thread is too big for me to go thru it post by post so I'll just make a few questions and hopefully I'll get some answers. I flashed this ROM and it was working flawlessly. I only found very few bugs like not being able to set up multiple recurrent alarms because the app would freeze and there was another bug but I can't remember. The problem I find frustrating is with the text messages or SMSs. At first I was not receiving SMSs. Then I was receiving them but I couldn't send any. I returned back to stock VS98024a and I'm still having the same problem but at least I'm getting a pop-up when "General problems: cause code 96". I have googled this several times in several ways and can't seem to find a solution, not even on the Verizon site or help app on the phone. I need help with this please.
How to keep the back home task manager buttor on the screen?
battery life? i want to install on lg d800 and its beta only..
dori kernel
Hi,
From where you get Dorimanx kernel for AOSP ROMs ?
My phone says it can't connect to the camera, and the torch. Does anyone know how to solve this?
Sent from my LG-LS980 using XDA Free mobile app
LG G2 D802 SIM not recognized
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
a13xch1 said:
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
Click to expand...
Click to collapse
Please state exact filename and order of wipe/flash.
Just tried the test build for D802. Booted at LG logo for a while then screen turned black with 2 red lines and one green vertical line. I was so sure I was gonna get the permanent black lines but then again I read that the damaged screens are caused by already faulty hardware under high heat.
Anyways, I panicked and then I restarted the phone by pressing power + down. Then I got the weird boot sequence like everyone above describes and it boots into the OS. Thank God I got no black lines! However it wasn't stable for me as the phone rebooted itself twice within the span of 20 minutes. I'm going back to 13/10 build for now.
Any d802 users flashing latest twitter released rom can you please report here if jdi or lgd and whether or not weird logo appeared?
I'm on jdi and had weird logo appeared after clean flash. I did not let the rom boot and reflashed previous version without further problems
FYI, houston's latest works great so far on the VS980. Clean flash, using RenderKernel R24.
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
jclemens23 said:
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
Click to expand...
Click to collapse
Migrating from one ROM to another is for me like this:
1. Nandroid backup
2. Wipe all except sdcard (yes, wipe system)
3. Flash new ROM
Be sure to always have a Nandroid backup!
And always check what baseband (aka radios or modem) your new ROM is requiring.
-___-
If you are UPDATING your current ROM, I.e. flashing a new build of let's say paranoid android, you can flash the updated file right on top of your old system. That is called DIRTY FLASHING and it's actually risky, so please, always do Nandroid backups!
-____-
Peace
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
jclemens23 said:
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
Click to expand...
Click to collapse
Ok
I would;
Update my custom recovery to the latest
Download recommended baseband, to be on the safe side
Redownload the ROM
Check the md5-checksum
Retry to install it
Flash the recommended baseband, better safe than sorry
Never give up
Peace
Hi guys i just flashed the newest build and out of all the roms i have flashed i have never seen this problem. After i flashed i have no sim service at all. Done a clean install still no good.

[H918] Random Reboots on Custom Roms

So, I had a day 1 v20 that began randomly rebooting back in december. Thought it was a hardware issue and finally got around to replacing it the other day. Now, after getting the replacement v20 set up on a custom rom (AICP) I'm seeing random reboots again. I've tried every single custom rom available for the h918 and they all experience reboots. When i've asked about the issue in the threads it seems as if I'm the only one. It appears to be a custom-rom only problem that apparently no one else is experiencing? The kernel panics are being caused by the modem, and it started happening when I upgraded to the 10j base. This replacement also came with 10j. Am I just super unlucky with two duds or is there really something going on here?
TLDR; Anyone else with a h918 with 10j bootloader/modem running custom roms and seeing random reboots?
What kernel do you use? If you use Konverged, it seems to give random reboots after a while of use. I noticed that right away though.
Biff627 said:
What kernel do you use? If you use Konverged, it seems to give random reboots after a while of use. I noticed that right away though.
Click to expand...
Click to collapse
Have always left kernel stock.
Are you making sure that you are wiping data when flashing a rom? Clean install should help. What other things do you use? When does it crash? Maybe a root app is causing this???
Biff627 said:
Are you making sure that you are wiping data when flashing a rom? Clean install should help. What other things do you use? When does it crash? Maybe a root app is causing this???
Click to expand...
Click to collapse
This is a fresh replacement device with a clean rom install. There was no data to wipe. Happens even without any apps installed and it's completely random and cannot be reproduced. The only thing I know is the modem is causing the kernel panics.
trobertson said:
This is a fresh replacement device with a clean rom install. There was no data to wipe. Happens even without any apps installed and it's completely random and cannot be reproduced. The only thing I know is the modem is causing the kernel panics.
Click to expand...
Click to collapse
Welll would this help at all? https://www.androidfilehost.com/?fid=673368273298927322 Its the modem and radio for H918? Not sure if this could help at all. I have a VS995 device. And I havent seen anyone else with this issue. If you do flash this... Backup yours first.
Biff627 said:
Welll would this help at all? https://www.androidfilehost.com/?fid=673368273298927322 Its the modem and radio for H918? Not sure if this could help at all. I have a VS995 device. And I havent seen anyone else with this issue. If you do flash this... Backup yours first.
Click to expand...
Click to collapse
The phone came with stock 10j.. flashing this wouldn't change anything.
trobertson said:
The phone came with stock 10j.. flashing this wouldn't change anything.
Click to expand...
Click to collapse
Does the KDZ have 10j included? If not maybe try that to downgrade and reroot from there
Biff627 said:
Does the KDZ have 10j included? If not maybe try that to downgrade and reroot from there
Click to expand...
Click to collapse
There is a 10i kdz that I can try.. the kdz's are full stock flash files. Bootloader modem system efs etc
trobertson said:
There is a 10i kdz that I can try.. the kdz's are full stock flash files. Bootloader modem system efs etc
Click to expand...
Click to collapse
Im just wondering if for some reason the 10J is messing with it somehow. What rom are you using and what other roms have you used in the past that give you this issue?
Biff627 said:
Im just wondering if for some reason the 10J is messing with it somehow. What rom are you using and what other roms have you used in the past that give you this issue?
Click to expand...
Click to collapse
Aicp, rr, cm-remix, stock Lineage.
trobertson said:
Aicp, rr, cm-remix, stock Lineage.
Click to expand...
Click to collapse
So things that already have issues :silly:
All jokes aside. I would recommend trying Weta to see if that helps. Very stable rom
Biff627 said:
So things that already have issues :silly:
All jokes aside. I would recommend trying Weta to see if that helps. Very stable rom
Click to expand...
Click to collapse
The entire point here is that I don't want to run stock or anything based on stock. I would simply chalk it up to the Lineage base but since I'm one of a serious minority having this problem I'm led to believe it's something simpler that can be fixed. Possibly related to 10j as most custom ROM users are still running 10d firmware
trobertson said:
The entire point here is that I don't want to run stock or anything based on stock. I would simply chalk it up to the Lineage base but since I'm one of a serious minority having this problem I'm led to believe it's something simpler that can be fixed. Possibly related to 10j
Click to expand...
Click to collapse
Anything not based on stock will give you issues. One reason why I like stock based roms is because the second screen will actually work... I would atleast test a stock based rom to see how it goes. If it works and doesnt crash, Then something is wrong with the rom or your could be flashing it wrong :/ Idk, just an idea to test. Non stock roms will Always give you issues. Always
If you still have issues on a stock based rom, then I would downgrade with the kdz and try again. Its probably crashing since the modem is 10j and the rom isnt really fit for that.
Biff627 said:
Anything not based on stock will give you issues. One reason why I like stock based roms is because the second screen will actually work... I would atleast test a stock based rom to see how it goes. If it works and doesnt crash, Then something is wrong with the rom or your could be flashing it wrong :/ Idk, just an idea to test. Non stock roms will Always give you issues. Always
If you still have issues on a stock based rom, then I would downgrade with the kdz and try again. Its probably crashing since the modem is 10j and the rom isnt really fit for that.
Click to expand...
Click to collapse
I never used the second screen, it's more of a nuisance for me. Everything it did can be replaced by gestures and lockscreen settings on custom. Only thing I miss is notifications but that's why we have ambient display.
I might try downgrading to the 10i firmware to see what happens. Unfortunately there are no 10d flashables. Otherwise this ROM is flawless.
trobertson said:
I never used the second screen, it's more of a nuisance for me. Everything it did can be replaced by gestures and lockscreen settings on custom. Only thing I miss is notifications but that's why we have ambient display.
I might try downgrading to the 10i firmware to see what happens. Unfortunately there are no 10d flashables. Otherwise this ROM is flawless.
Click to expand...
Click to collapse
Not to shoot down your opinion, but why would you get it if the Second screen is a nuisance to you?? Im also pretty sure camera is screwed on custom roms.... I just dont have that appeal. Its better safe than sorry to check and see if a stock rom works fine than to downgrade and it still doesnt work :/ Idk thats my 2 cents
Biff627 said:
Not to shoot down your opinion, but why would you get it if the Second screen is a nuisance to you?? Im also pretty sure camera is screwed on custom roms.... I just dont have that appeal. Its better safe than sorry to check and see if a stock rom works fine than to downgrade and it still doesnt work :/ Idk thats my 2 cents
Click to expand...
Click to collapse
It was between this and the axon 7. I didn't want a fullHD screen so that eliminated a lot of the other options.
trobertson said:
It was between this and the axon 7. I didn't want a fullHD screen so that eliminated a lot of the other options.
Click to expand...
Click to collapse
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Biff627 said:
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Click to expand...
Click to collapse
Not a Samsung fan. Especially with KNOX. I buy phones first based on the chances of development producing workable custom ROMs and second based on hardware features.
Back to the main topic: I just managed to flash the 10i modem alone so we'll see what happens. I'm working on extracting the 10d modem as well.
Biff627 said:
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Click to expand...
Click to collapse
UPDATE: Flashing the 10i modem made no difference, still having random reboots (although they seem less frequent), I will try the 10d modem once I find a way to extract it from the TOT files posted on this forum.

Wifi is disconnecting on screen off

So I tried 3 differents roms and all of them had the same issue and I can't fix it.
I tested with stock rom, stock kernel or blu spark kernel. I tried bliss rom and now I am using Codename Phoenix rom.
But I always have the same issue after going to Android Pie, my wifi get disconnected after a few minutes of screen off. My global wifi_sleep_policy is to always enabled but it is not working.
Does anyone have a fix for it?
archraziel said:
So I tried 3 differents roms and all of them had the same issue and I can't fix it.
I tested with stock rom, stock kernel or blu spark kernel. I tried bliss rom and now I am using Codename Phoenix rom.
But I always have the same issue after going to Android Pie, my wifi get disconnected after a few minutes of screen off. My global wifi_sleep_policy is to always enabled but it is not working.
Does anyone have a fix for it?
Click to expand...
Click to collapse
For Pie custom roms you need pie firmware too, checked that?
strongst said:
For Pie custom roms you need pie firmware too, checked that?
Click to expand...
Click to collapse
I was using stock 9.0.4 before trying the custom ROMs. Wouldn't the firmware be automatically updated ?
I will have a look into that, maybe reflash the firmware.
archraziel said:
I was using stock 9.0.4 before trying the custom ROMs. Wouldn't the firmware be automatically updated ?
I will have a look into that, maybe reflash the firmware.
Click to expand...
Click to collapse
The you have 9.0.4 firmware, but try to flash again. Also make sure it's not a custom kernel issue.
strongst said:
The you have 9.0.4 firmware, but try to flash again. Also make sure it's not a custom kernel issue.
Click to expand...
Click to collapse
My current rom is Codename Phoenix, I tried about 3 different kernel to make sure is not a kernel related.
My current baseband is mpsss.at.2.0.c4.7-00070-8998_gen_pack-2.132073.1.179387.1
If I flash the firmware/modem from OOS 9.0.5, will it break something?
archraziel said:
My current rom is Codename Phoenix, I tried about 3 different kernel to make sure is not a kernel related.
My current baseband is mpsss.at.2.0.c4.7-00070-8998_gen_pack-2.132073.1.179387.1
If I flash the firmware/modem from OOS 9.0.5, will it break something?
Click to expand...
Click to collapse
No it won't break something, you can try to update it, maybe it's running then for CNP rom
strongst said:
No it won't break something, you can try to update it, maybe it's running then for CNP rom
Click to expand...
Click to collapse
So I reflash the firmware+modem form this page
https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
I flashed the 9.0.5 version, but the problem persist, after a few minutes of screen off the wifi just disconnect and I have to unlock and enter the app to receive the notifications.
I realized the problem is that for some reason whatsapp is being killed in the background even after I put it to not be battery optimized.
Will try to make it a sysapp to see if works
archraziel said:
I realized the problem is that for some reason whatsapp is being killed in the background even after I put it to not be battery optimized.
Will try to make it a sysapp to see if works
Click to expand...
Click to collapse
Your wifi disconnects cause YouTube gets killed in the background
strongst said:
Your wifi disconnects cause YouTube gets killed in the background
Click to expand...
Click to collapse
I fixed my wifi , it was caused by some new firmware installed in the router that had a bug that caused all my devices to disconnect when idle.
The new problem now is that my apps are being closed/killed after the screen is off for a few minutes I tried to turn off Baterry Optimization but it did not work.
If I put my phone to charge this behavior does not happen my phone does not kill the apps.
archraziel said:
I fixed my wifi , it was caused by some new firmware installed in the router that had a bug that caused all my devices to disconnect when idle.
The new problem now is that my apps are being closed/killed after the screen is off for a few minutes I tried to turn off Baterry Optimization but it did not work.
If I put my phone to charge this behavior does not happen my phone does not kill the apps.
Click to expand...
Click to collapse
Thanks for the information. To help others you can mark the thread as [SOLVED] and add an info to the first post that it was your routers firmware and not the smartphone
After some time and a lot more of test I find out it wasnt my router firmware problem
The only thing that really solved the problem was installing this mod:
https://forum.xda-developers.com/oneplus-5/themes/magisk-pixel-2-wifi-mod-t3752321
Thanks and this thread can be closed now.

Categories

Resources