Database Users

[Q&A] [ROM][KitKat 4.4.4_r2][UnOfficial BeanStalk] 4.4.4065 Build

Q&A for [ROM][KitKat 4.4.4_r2][UnOfficial BeanStalk] 4.4.4065 Build
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KitKat 4.4.4_r2][UnOfficial BeanStalk] 4.4.4065 Build. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

So I apologize if i'm a noob and post this in the wrong place.
I'm having difficulty with Xposed Installer + greenify on the lastest Beanstalk 4.4.4065-20141027 build. The ROM comes with Xposed 2.4.1 preinstalled, it doesn't allow me to update to 2.6.1 or any other update for that matter. Because I can't update, Greenify isn't working properly, I can't use the donation package features. a notification keeps poping up saying "Xposed module list was updated, Changes will become active on reboot" I've rebooted countless times.
When I attempt to update the Xposed Installer, everything downloads no problem, I get the Installer that launches but when I click Install I get the following error message: "App not installed, An existing package by the same name with a conflicting signature is already installed."
I've reflashed the ROM, clear cache and dalvik cache. That didn't fix it. I then cleared everything to factory reset and reflashed. Again not working.
Anyone one getting this issue?

Jayeff28 said:
So I apologize if i'm a noob and post this in the wrong place.
I'm having difficulty with Xposed Installer + greenify on the lastest Beanstalk 4.4.4065-20141027 build. The ROM comes with Xposed 2.4.1 preinstalled, it doesn't allow me to update to 2.6.1 or any other update for that matter. Because I can't update, Greenify isn't working properly, I can't use the donation package features. a notification keeps poping up saying "Xposed module list was updated, Changes will become active on reboot" I've rebooted countless times.
When I attempt to update the Xposed Installer, everything downloads no problem, I get the Installer that launches but when I click Install I get the following error message: "App not installed, An existing package by the same name with a conflicting signature is already installed."
I've reflashed the ROM, clear cache and dalvik cache. That didn't fix it. I then cleared everything to factory reset and reflashed. Again not working.
Anyone one getting this issue?
Click to expand...
Click to collapse
Just Go few page back there is how to remove just go to beanstalk option General setting system app remover and remove xposed installer.
Chineel

I've already attempted to remove the apk with system app remover. Then when trying to install 2.6.1 the system gave me the same error: "App not installed. An existing package by the same name with conflicting signature is already install."
For some reason the OS is holding on to 2.4.1...
Any other suggestions?

Jayeff28 said:
I've already attempted to remove the apk with system app remover. Then when trying to install 2.6.1 the system gave me the same error: "App not installed. An existing package by the same name with conflicting signature is already install."
For some reason the OS is holding on to 2.4.1...
Any other suggestions?
Click to expand...
Click to collapse
for next build I will replace that apk for those who needs latest one please.

Thank you! Looking forward to the update! loving the quick replies too. Thanks so much!

battery life
How is the battery life in this rom?

donedypapa said:
How is the battery life in this rom?
Click to expand...
Click to collapse
No one has yet complained about battery life.
For me I can use it for whole day on wifi Bluetooth and Data.

Thanks mate.Any chance to get this great rom for sg2 as well?

donedypapa said:
Thanks mate.Any chance to get this great rom for sg2 as well?
Click to expand...
Click to collapse
There must be as I don't have the device . If you still needs I will try to build it for you but only you need to test it by yourself..

new rom
what the changelog??

Few bugs i've noticed
Hi,
I've noticed few bugs in latest ROM.
- when you enable PIE control and try to disable navigation bar height to 0% i can't do that. It goes only till 35%.
- in contact list when you scroll on someone whos name starts with letter G,just for example lets say that contact is Greg or something. And when you press letter G in the circle ( on the left side, just by the name ) to se details about that contact it shows you his details. And when you close that details panel by swiping down or pressing Back button contact app just glitches for a moment and jumps back to first person on your contact list. It doesn't stay on letter G.

SystemUi crash
Love your rom, but todays update keep's crashing after applying themes... Did a clean instal twice

Ballantines123 said:
Love your rom, but todays update keep's crashing after applying themes... Did a clean instal twice
Click to expand...
Click to collapse
It's CM bug Next Build Is coming with fix

[GUIDE] Install cyanogem 12 in moto maxx xt 1225

The device must be unlocked with the bootloader and preferably be installed with the Lollipop.
Download the recovery rom the gapps
Recovery: http://skrilax.droid-developers.org/cm12quark/recovery.img
Rom: http://download.cyanogenmod.org/?device=quark
Gapps: https://mega.co.nz/#!m0YWEQDb!nlhiOQppxQHOQmBgwuxipXExb8N48V0mkqL37ajgtD4 or here http://forum.xda-developers.com/showthread.php?t=2943330
Gapps central http://forum.xda-developers.com/and...gn=Feed:+xda-developers/ShsH+(xda-developers)
Place the device in fastboot (turn, turn holding volume - and power)
In the fastboot mode go put the downloaded file in the same past that run the fastboot and type in cmd
Fastboot flash recovery recovery.img
After that select the recovery option
Within the recovery knife cm one factory reset (will delete all apps and the official rom) will take a time up to 10 minutes
Now choose apply update and select the folder of the download, install the rom, at the end install gapps.
A wipe cache and select reboot now.
The rom is still beta and contains bugs.
Cyanogem now is oficial for our device, know as quark.
Oficial topic is here http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
Great Thanks for @Skrilax_CZ from bring this awesome rom.

matheus_sc said:
The device must be unlocked with the bootloader and preferably be installed with the Lollipop.
Download the recovery rom the gapps
Recovery: http://skrilax.droid-developers.org/cm12quark/recovery.img
Rom: http://skrilax.droid-developers.org/cm12quark/cm-12-20150320-SKRILAX-PUBLIC-quark.zip
Gapps: http://d-h.st/s6IB
Place the device in fastboot (turn, turn holding volume - and power)
In the fastboot mode go put the downloaded file in the same past that run the fastboot and type in cmd
Fastboot flash recovery.img
After that select the recovery option
Within the recovery knife cm one factory reset (will delete all apps and the official rom) will take a time up to 10 minutes
Now choose apply update and select the folder of the download, install the rom, at the end install gapps.
A wipe cache and select reboot now.
The rom is still beta and contains bugs.
Cyanogem now is oficial for our device, know as quark.
Oficial topic is here http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
Soon we have first nightly will be found here http://download.cyanogenmod.org/?device=quark
Great Thanks for @Skrilax_CZ from bring this awesome rom.
Click to expand...
Click to collapse
Nice!
Waiting for release Nigh

Guys now oficial build is up

matheus_sc said:
The device must be unlocked with the bootloader and preferably be installed with the Lollipop.
Download the recovery rom the gapps
Recovery: http://skrilax.droid-developers.org/cm12quark/recovery.img
Rom: http://download.cyanogenmod.org/?device=quark
Gapps: http://d-h.st/s6IB
Place the device in fastboot (turn, turn holding volume - and power)
In the fastboot mode go put the downloaded file in the same past that run the fastboot and type in cmd
Fastboot flash recovery.img
Click to expand...
Click to collapse
I might be wrong, but I think syntax should be:
fastboot flash recovery recovery.img
And thank you for this.
Simplifies things a lot.

poncespr said:
I might be wrong, but I think syntax should be:
fastboot flash recovery recovery.img
And thank you for this.
Simplifies things a lot.
Click to expand...
Click to collapse
You are right Thanks , i update topic.

Shouldn't this be a sticky so it is easy to find?

Maybe, today we have more bugs fixed i see em cmxlog.com

issues
i'm having issues with installation...
"install failed" and a lot of errors with "E: failed to mount [...] (invalid argument)"
what this should be?

Can be, bad download or dont be in Lollipop

Question
Hey guys, I was meaning to ask this question in the Moto Maxx forum (here) but I thought it might be more appropriate to post it as a general question for all Android users.
I am using Xposed for now but thinking about going the CM way on my Moto Maxx. Therefore I posted this discussion post. What do you guys think?
http://forum.xda-developers.com/general/general/discussion-custom-rom-using-xposed-t3065201

Kiwironic said:
Hey guys, I was meaning to ask this question in the Moto Maxx forum (here) but I thought it might be more appropriate to post it as a general question for all Android users.
I am using Xposed for now but thinking about going the CM way on my Moto Maxx. Therefore I posted this discussion post. What do you guys think?
http://forum.xda-developers.com/general/general/discussion-custom-rom-using-xposed-t3065201
Click to expand...
Click to collapse
I use cm without xposed here, i think be more stable, xposed is alpha yet.

matheus_sc said:
I use cm without xposed here, i think be more stable, xposed is alpha yet.
Click to expand...
Click to collapse
I think you're right. I will flash it now.
Update:
I had my backup done and everything in order, but didn't go through with it as I am not sure if the official Moto apps still work ?? Moto assist, voice, etc....? Anybody wants to help with this?
I use the wave to action(s) using the IR sensors a lot as well as the Moto voice and the rest of the much appreciated Moto feature and would hate to lose them.

Kiwironic said:
I think you're right. I will flash it now.
Update:
I had my backup done and everything in order, but didn't go through with it as I am not sure if the official Moto apps still work ?? Moto assist, voice, etc....? Anybody wants to help with this?
I use the wave to action(s) using the IR sensors a lot as well as the Moto voice and the rest of the much appreciated moto feature and would hate to love them.
Click to expand...
Click to collapse
No yet , I love them too ;(
Sent from my quark using XDA Free mobile app

Kiwironic said:
I think you're right. I will flash it now.
Update:
I had my backup done and everything in order, but didn't go through with it as I am not sure if the official Moto apps still work ?? Moto assist, voice, etc....? Anybody wants to help with this?
I use the wave to action(s) using the IR sensors a lot as well as the Moto voice and the rest of the much appreciated Moto feature and would hate to lose them.
Click to expand...
Click to collapse
No moto apps dont work in cm yet

Topic update with gapps central link

Moto apps will not work themselves in CM12. The goal with CM12 is to (aside from fixing Wifi AP, already found where the problem is, but unsure of how to fix it right now):
1) Get the IR gestures to work (currently WIP, waking the phone from sleep is first task (monitor http://review.cyanogenmod.org/#/c/92647/ - 95% of the work will be here, current status is that IR sensor works, but isn't configured properly and doesn't wake the device), silencing ringtones will come afterwards)
2) Get Nexus 6 Voice Recognition to work.
btw. if you place your phone to dark, you can see the IR leds (top right, bottom left, bottom right ).

Skrilax_CZ said:
Moto apps will not work themselves in CM12. The goal with CM12 is to (aside from fixing Wifi AP, already found where the problem is, but unsure of how to fix it right now):
1) Get the IR gestures to work (currently WIP, waking the phone from sleep is first task (monitor http://review.cyanogenmod.org/#/c/92647/ - 95% of the work will be here, current status is that IR sensor works, but isn't configured properly and doesn't wake the device), silencing ringtones will come afterwards)
2) Get Nexus 6 Voice Recognition to work.
btw. if you place your phone to dark, you can see the IR leds (top right, bottom left, bottom right ).
Click to expand...
Click to collapse
Great, if you can, after that work, could you look in battery optimizations.

[Q] SM-T530NU - No wifi after root

Hello XDA members,
I seem to have borked something on my new SM-T530NU (GALAXY TAB 4 10.1 WI-FI) when I attempted to root the device (to get rid of all the bloatware).
I followed the instructions I found online (can't insert links yet) and everything seemed to have worked fine (Odin giving me a PASS). Once I got into the OS I noticed I was unable to connect to my WIFI. I reread the instructions and this time noticed my build id was different than the writer's (I have KOT49H.T530NUUEU1AOA2 and he had KOT49H.T530NUUEU1AND4). I checked the CF-Auto-Root Repository and noticed they don't have one for mine
Finally I decided I would download Kies 3 from Samsung and do a Firmware Upgrade and Initialization but that accomplished nothing.
Can anyone help me solve this?

hi, it sounds like you have a mismatch between your kernel and your kernel's modules, instead of an upgrade you may need to do a full reflash of
the current rom version you upgraded from/to i'm guessing ND4 all the way. Alternately you could try one of the repacked stock roms that are available, otherwise you could attempt a custom kernel build so your modules match up , package it and flash it, note that this is not as simple as an odin flash and problem solved. You would need to pack that custom kernel build for recovery flashing instead, meaning the package would have to write the boot.img to it's proper location and the modules to their proper location /system/lib/modules.
check /system/lib/modules on the rom you are running right now and see if wlan.ko is present. If there is a folder in /system/lib/modules named pronto then see if in that directory the modules pronto_wlan.ko exists and if it is symlinked one directory up to wlan.ko
you should always inspect fota's and firmwares before flashing. if you have the firmwares still and/or you managed to capture the upgrade, inspect them to see what was written/overwritten and you'll have an idea of what your issue might be.
also in terminal su and enter the command after toggling wifi on
lsmod
if wlan.ko does not show up, try
modprobe -f /system/lib/modules/wlan.ko
alternately try entering in terminal as su
svc wifi enable

moonbutt74 said:
hi, it sounds like you have a mismatch between your kernel and your kernel's modules, instead of an upgrade you may need to do a full reflash of
the current rom version you upgraded from/to i'm guessing ND4 all the way. Alternately you could try one of the repacked stock roms that are available, otherwise you could attempt a custom kernel build so your modules match up , package it and flash it, note that this is not as simple as an odin flash and problem solved. You would need to pack that custom kernel build for recovery flashing instead, meaning the package would have to write the boot.img to it's proper location and the modules to their proper location /system/lib/modules.
check /system/lib/modules on the rom you are running right now and see if wlan.ko is present. If there is a folder in /system/lib/modules named pronto then see if in that directory the modules pronto_wlan.ko exists and if it is symlinked one directory up to wlan.ko
you should always inspect fota's and firmwares before flashing. if you have the firmwares still and/or you managed to capture the upgrade, inspect them to see what was written/overwritten and you'll have an idea of what your issue might be.
also in terminal su and enter the command after toggling wifi on
lsmod
if wlan.ko does not show up, try
modprobe -f /system/lib/modules/wlan.ko
alternately try entering in terminal as su
svc wifi enable
Click to expand...
Click to collapse
Thanks for the info moonbutt74,
I don't feel comfortable playing with the Kernel / commands (besides I seem to have lost the Super User when I flashed to the latest firmware using Kies3) so I decided to try some old firmware like you recommended (PDA T530NUUEU1AND4 / CSC T530NUXAC1AND4) on sammobile and flashed my device with Odin using the default options. Wifi/bluetooth works now but now I have a new problem; Google Play services keep stopping and giving me errors. I clicked ok a few times and the error is no longer appearing however I can't seem to login to Google (Can't establish a reliable connection to the server) . If I try to access gmail.com from Chrome it tells me something is interfering with your secure connection to gmail.
Any ideas?

SulfurMDK said:
Thanks for the info moonbutt74,
I don't feel comfortable playing with the Kernel / commands (besides I seem to have lost the Super User when I flashed to the latest firmware using Kies3) so I decided to try some old firmware like you recommended (PDA T530NUUEU1AND4 / CSC T530NUXAC1AND4) on sammobile and flashed my device with Odin using the default options. Wifi/bluetooth works now but now I have a new problem; Google Play services keep stopping and giving me errors. I clicked ok a few times and the error is no longer appearing however I can't seem to login to Google (Can't establish a reliable connection to the server) . If I try to access gmail.com from Chrome it tells me something is interfering with your secure connection to gmail.
Any ideas?
Click to expand...
Click to collapse
Disregard, turns out the time/date was off by a few months and setting it to the current time/date fixed the SSL issue but Google Play Services are going nuts / stopped.

SulfurMDK said:
Disregard, turns out the time/date was off by a few months and setting it to the current time/date fixed the SSL issue but Google Play Services are going nuts / stopped.
Click to expand...
Click to collapse
okay cool, sub77 and i both have recoveries available for the sm-t530nu pick whichever,
when a device has a custom recovery available you don't need to go the long way around for root anymore.
search google for supersu update zip
and download and flash the latest version and flash in recovery and your root should be solved.
m

SulfurMDK said:
Disregard, turns out the time/date was off by a few months and setting it to the current time/date fixed the SSL issue but Google Play Services are going nuts / stopped.
Click to expand...
Click to collapse
And a factory reset fixed the Google services but I'm still getting some weird issues with the Play store. I'll do some digging and see what I come up with.
In the mean time, do you have any recommendations on how to proceed to properly root my tablet? I really want to get rid of some of the bloatware on this thing...

SulfurMDK said:
And a factory reset fixed the Google services but I'm still getting some weird issues with the Play store. I'll do some digging and see what I come up with.
In the mean time, do you have any recommendations on how to proceed to properly root my tablet? I really want to get rid of some of the bloatware on this thing...
Click to expand...
Click to collapse
hi,
see my previous post, and remember to make the full backup of your rom before debloating attempt.
And after you satisfied whith your results make another full backup of your debloated rom.
keep both versions.
m

moonbutt74 said:
okay cool, sub77 and i both have recoveries available for the sm-t530nu pick whichever,
when a device has a custom recovery available you don't need to go the long way around for root anymore.
search google for supersu update zip
and download and flash the latest version and flash in recovery and your root should be solved.
m
Click to expand...
Click to collapse
Alright, I'll give it a shot. Thanks alot for all your help!
On a side note, is there a good ROM out there for the Tab 4 ? It seems the support for this device is really slim ... Preferably something based off Lollipop?

SulfurMDK said:
Alright, I'll give it a shot. Thanks alot for all your help!
On a side note, is there a good ROM out there for the Tab 4 ? It seems the support for this device is really slim ...
Click to expand...
Click to collapse
see sub77's threads for rom builds all beta or alpha
see repey6's threads for modded stock roms.
i have a rough slimrom build [not release] with no camera and battery issues.
developement takes time and is done for free and largely on a hobby basis.
sub77's is coming along nicely as to progress on cm12
m

moonbutt74 said:
see sub77's threads for rom builds all beta or alpha
see repey6's threads for modded stock roms.
i have a rough slimrom build [not release] with no camera and battery issues.
developement takes time and is done for free and largely on a hobby basis.
sub77's is coming along nicely as to progress on cm12
m
Click to expand...
Click to collapse
Stupid thing ... the tablet decided to update itself and I'm back to square one (wifi not working). Sigh.
What do you recommend? Should I reflash NAD4 and and turn off updates? Or is there a better solution?

SulfurMDK said:
Stupid thing ... the tablet decided to update itself and I'm back to square one (wifi not working). Sigh.
What do you recommend? Should I reflash NAD4 and and turn off updates? Or is there a better solution?
Click to expand...
Click to collapse
repeat your previous steps and shut off your router. then disable your updates.

moonbutt74 said:
repeat your previous steps and shut off your router. then disable your updates.
Click to expand...
Click to collapse
I tried installing your recovery a couple of times but I keep getting the following:
Install from package...
Finding update...
Opening Update...
Verifying update...
E: failed to verify whole-file signature
E:signature verification failed
Installation aborted
Click to expand...
Click to collapse
Is there a way to turn off verification on the stock recovery?

SulfurMDK said:
I tried installing your recovery a couple of times but I keep getting the following:
Is there a way to turn off verification on the stock recovery?
Click to expand...
Click to collapse
ahh okay, you need to install your chosen custom recovery with odin.
read the entire OP [original post].
I have to cut you off here to give you the push you need to make the most
of XDA. Within the tab 4 section you will find full instruction to accomplish
your mission but, you must search for it. That and i have a few projects
in front of me at the moment. Just keep a level/focused head and you'll
get things sorted. :good:
m

SulfurMDK said:
I tried installing your recovery a couple of times but I keep getting the following:
Is there a way to turn off verification on the stock recovery?
Click to expand...
Click to collapse
You can't install a custom recovery from stock recovery, I would recommend downloading the img file and installing it with the flashify app from the play store, that's how I got a custom recovery on my tablet and I have the same model as you. As far as Roms, both metallica's cm 11 and sub77's cm12 are great, just depends if you want Kit Kat or lollipop

moonbutt74 said:
ahh okay, you need to install your chosen custom recovery with odin.
read the entire OP [original post].
I have to cut you off here to give you the push you need to make the most
of XDA. Within the tab 4 section you will find full instruction to accomplish
your mission but, you must search for it. That and i have a few projects
in front of me at the moment. Just keep a level/focused head and you'll
get things sorted. :good:
m
Click to expand...
Click to collapse
Understood m
Thanks again for all your help and good luck on your projects!!
Regards

Just wanted to thank you both for your invaluable help. I'm now running a custom rom by repey6 and everything is working all minus all the Samsung bloat.
Cheers

[GUIDE] Flashing ROMs to the Vivo Air

Alright, so following some prodding, searching, and questioning, I flashed MIUI V6 to my BLU Vivo Air alongside TWRP.
I will update this post with a detailed, step-by-step guide including my own personal mirrors for your convenience and those of you without 4PDA accounts, which is the Russian equivalent of XDA.
Upon booting, I noticed apps force closing without being launched. Namely Hangouts and Newsstand. I'm sure reinstalling them will resolve the issue rather quickly.
Stay tuned for updates.
Update 1:
TWRP had difficulty mounting data and cache for me, and was unable to format them. This led to applications force closing, window mishaps, and accounts glitching out. I just flashed Carliv recovery, and flashed MIUI with it. Flashing gapps at the moment, and will update you on my progress.
Update 2:
Currently attempting to format data (success), cache (success), and dalvik (success).
Update 3:
Rebooting into MIUI V6, checking if I've entered a bootloop.
5 seconds - Boot animation reached, "MIUI Pro."
165 seconds - Still booting.
180 seconds - Setup screen reached, MIUI V6 flashed successfully.
Update 4:
Google apps flashed successfully, no redraws or force closes this time. Had an issue with the keyboard not registering as being selected, Google voice typing appeared as the default. Pull down notification shader and "choose input method" to select MIUI Smart Keyboard. Signed into Google successfully. Will run preliminary tests on video playback, camera, and multitasking.
Guide:
If you mess up your phone, it is on you, and I am not to be held liable for your actions. This is your responsibility. A lack of planning on your part does not constitute an emergency on mine. With that out of the way, if you encounter troubles, I am more than happy to help you.
Step 1:
Root your phone using one of the links provided. Click HERE for method 1, or HERE for method 2. I personally used method 1 because it was the first I saw. They both get the job done.
Step 2:
Install THIS application (Settings -> Security -> Unknown Sources), and install a recovery. I installed Carliv recovery, and had no problems with it. You can also install TWRP, however, it had issues mounting data and cache. This left it unable to factory reset when I flashed MIUI, which subsequently led to problems. I do not recommend flashing TWRP - You have been warned. Carliv recovery says it can't "mount" cache, although when formatting it does so without a problem. I believe Carliv is supposed to be touch-based, although the touches weren't responding for me. The controls are as follows: Volume +/- for navigating, Power for selecting, and the Back key for, you guessed it, going back.
Step 3:
Install MIUI V6, located HERE, and then install Google Apps, located HERE. After installing, factory reset the device from recovery and reboot into the system. I posted my timestamps at the top of the post, so you can get an idea of how long your flash/boot process should take.
Step 4:
Basic setup. Be ready to fix your keyboard if you had the same issue I did, which isn't even necessarily a problem. Choose WLAN network and sign into your accounts, then you're good to go.
To root the ROM, I recommend finding "iRoot" for your computer. Then boot to recovery and install the SuperSU zip, as it's better than the root app which comes with the iRoot method.
Enjoy your ROM, and be sure to thank our Ruski comrades over at 4PDA!
Special thanks to @DvDwx. (research), @itsJohnuno (answers), and @Milly7 (testing).
All download links are being hosted by me, and I recommend creating mirrors of your own as safety precautions in the event that the files are removed or become unavailable.
Have a phenomenal day or night, possibly even both. If you have any questions, I'll do my best to answer them.

Nice Guide ;D

DvDwx. said:
Nice Guide ;D
Click to expand...
Click to collapse
Push that Guide to Android Development thread, that is a ROM ;D
We need talk with our Forum Administrator to Manage some Topics and Fuse KAZAM Tornado 348 with BLU Vivo Air menu... and try explain to this administrator about the re-branding process to he can add the other phones like AllView, Fly and Gionee to this Phone Menu Threads topics ;D
:highfive:

DvDwx. said:
Push that Guide to Android Development thread, that is a ROM ;D
We need talk with our Forum Administrator to Manage some Topics and Fuse KAZAM Tornado 348 with BLU Vivo Air menu... and try explain to this administrator about the re-branding process to he can add the other phones like AllView, Fly and Gionee to this Phone Menu Threads topics ;D
:highfive:
Click to expand...
Click to collapse
I didn't create the resources in the ROM, I just made a guide to flashing ROMs using a specific ROM as an example. I would feel bad posting it in the developer section because I don't wish to be given credit for the ROM. I didn't make it.

Ilxaot said:
I didn't create the resources in the ROM, I just made a guide to flashing ROMs using a specific ROM as an example. I would feel bad posting it in the developer section because I don't wish to be given credit for the ROM. I didn't make it.
Click to expand...
Click to collapse
i understand that ;D
on my WonderMedia WM8880 Tablet project i share the projects from other developers... but i asked they to have permission to share that, and leave on post the credits with their names... maybe if you talk with developer on 4PDA for permission to do it or ask him if it is possible he share he ROM Project here is will be perfect... anyway Good Guide to Flash this ROM :highfive:

Could you please describe how to flash the carliv recovery. I downloaded the app in step 2 but I can't even seem to install the twrp recovery because phone reboots into stock recovery and I don't even see an option for the carliv one.

dimasp6 said:
Could you please describe how to flash the carliv recovery. I downloaded the app in step 2 but I can't even seem to install the twrp recovery because phone reboots into stock recovery and I don't even see an option for the carliv one.
Click to expand...
Click to collapse
You need have root to do this... And sometimes the root dont work correctly and dont stay giving the rights to aplicantion can work...

DvDwx. said:
You need have root to do this... And sometimes the root dont work correctly and dont stay giving the rights to aplicantion can work...
Click to expand...
Click to collapse
I do have root with Kingroot. So I just need to keep trying until it successfully flashes?
Edit: The app mlp RIO recovery installer constantly freezes on me not allowing me to flash any of the recoveries.

dimasp6 said:
I do have root with Kingroot. So I just need to keep trying until it successfully flashes?
Edit: The app mlp RIO recovery installer constantly freezes on me not allowing me to flash any of the recoveries.
Click to expand...
Click to collapse
You can also try iRoot. Install SuperSU and try using it as the root granter for the recoveries.

Does the magnetometer (compass) work for you guys on the miui rom? It doesn't work for me.

ron580 said:
Does the magnetometer (compass) work for you guys on the miui rom? It doesn't work for me.
Click to expand...
Click to collapse
The app itself hadn't worked for me, I tried it earlier. Have you tested another app? It may be the stock app. I haven't messed with it much, not a huge navigator myself. [emoji14]

Ilxaot said:
The app itself hadn't worked for me, I tried it earlier. Have you tested another app? It may be the stock app. I haven't messed with it much, not a huge navigator myself. [emoji14]
Click to expand...
Click to collapse
The senor doesn't work at all using this rom & google maps wont work properly without it. Also the time on the lock screen and the home screen show different times about an hour apart Other than that everything else works fine.

ron580 said:
The senor doesn't work at all using this rom & google maps wont work properly without it. Also the time on the lock screen and the home screen show different times about an hour apart Other than that everything else works fine.
Click to expand...
Click to collapse
Yeah. I've also noticed that downloading updates is botched, because it downloads an update for a different phone model. If you try to install it the installation will fail, but it won't hurt your phone.
All in all it's a pretty solid ROM for me.

Ilxaot said:
Yeah. I've also noticed that downloading updates is botched, because it downloads an update for a different phone model. If you try to install it the installation will fail, but it won't hurt your phone.
All in all it's a pretty solid ROM for me.
Click to expand...
Click to collapse
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.

request
Ilxaot said:
All in all it's a pretty solid ROM for me.
Click to expand...
Click to collapse
Known bugs? any screenshot running this ROM please? I'd like to see some, I'm not updated on what's going on with MIUI and btw, great work! thanks in advance!

JesusEMC said:
Known bugs? any screenshot running this ROM please? I'd like to see some, I'm not updated on what's going on with MIUI and btw, great work! thanks in advance!
Click to expand...
Click to collapse
I'll post some tomorrow. Re-read the past 5-6 posts and you'll see the bugs. I think you'll like it. MIUI is certainly different (settings default apps) and such, but it's a formidable ROM and performs relatively well.

ron580 said:
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.
Click to expand...
Click to collapse
on Captcha you need count the numbers and ignore the russian Letters Like for exemple -> ##22###16## -> 22+16= 38
to can finish the registration... and no, you don't need use VPN or Proxy to create the account :highfive:

ron580 said:
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.
Click to expand...
Click to collapse
I'm sure he knows about it...and the guy is activity working on the ROM...except the latest update seems to just boot loop from what I've read, rather just wait and see.

itsJohnuno said:
I'm sure he knows about it...and the guy is activity working on the ROM...except the latest update seems to just boot loop from what I've read, rather just wait and see.
Click to expand...
Click to collapse
Our Buddy @SSJGohon found the kernel source code and already shared on some topic(i Already re-shared that on Cyanogen Mod to Mediatek SoC's Development thread... but anyone there say nothing about it... and already shared on 4PDA to maybe the MiUi developer can Bring something to All...). i already downloaded and already start my research about what can be maked with that and for sure have a possibility to we have a custom Kernel and maybe Custom ROM like PURE AOSP, AOSPA... but Cyanogen Mod is more difficult because we don't have a updated Repo Source from MediaTek to work like Driver Blobs to GPU, Bluetooth, Wifi Drivers... etc
My real problem is i don't have all skills to make a custom kernel to Mediatek SoC because a lot of things change from Qualcomm to Mediatek.. but if anyone here want to try development that just search the topics with @SSJGohon comments replays :highfive:

Ilxaot said:
I'll post some tomorrow. Re-read the past 5-6 posts and you'll see the bugs. I think you'll like it. MIUI is certainly different (settings default apps) and such, but it's a formidable ROM and performs relatively well.
Click to expand...
Click to collapse
I've already installed the ROM, it runs smoothly! You were right, I really like it! I had an issue trying to format /data, it took like 15 minutes, and did a hard reset (pressed power button for a few seconds) and tried to format again and it worked. Im a little bit worry cause I've had 2 radom reboots so far.. Any idea of what has happened to me?

viper4android in RUI .. finally

Wait is over..
Installing viper in Realme UI is a nightmare..
Now it's a piece of cake..
Needed:
1. OS - Realme UI
2. Magisk 20.3 or above
3. Titanium apk
4. Overlay mount fix 2.1 magisk module
5. Viper module 2.7.1.6 magisk module
6. Root explorer
Steps:
1. Install Titanium apk and freeze Dolby apps ( 2 entries will there)
2. Install overlay in magisk and don't reboot
3. Install viper in magisk and don't reboot
4. Open viper app and provide root permission and install the drivers and reboot
5. After reboot open the viper app it shouldopen successfully but now WiFi ,camera,hotspot ,screen rotation will not work ( may be many things will not work but viper will work fine )
6. Now go to magisk and disable the overlay ( don't delete the module) and reboot
7. After reboot everything will work fine but viper app will say driver not found
8. Now open root explorer and go to location
/data/adb/modules/overlayfix , you will find 2 folders system and vendor , delete the culprits.. both..
9. And enable the overlay in magisk and reboot
10. Now everything should be working fine including viper will open successfully along with drivers installed
For C06 update
1. Follow steps till 5
2. In Step 6 , don't reboot
3. Skip step 7
4. Follow step 8 till end
Enjoy fellows
Tested in devices/version
1. Realme xt C05, C01
2. Realme 5 pro
Not sure on other version..may be you can try..
If any bootloops during restart then follow
https://forum.xda-developers.com/realme-xt/how-to/remove-magisk-module-cause-bootloop-t4093111
For autostart viper for every boot :You can enable startup in viper app info setting

It may work on realme.5.pro?

Madhuvrata said:
It may work on realme.5.pro?[/QUOTE
You can try..
If any bootloops during restart then follow
https://forum.xda-developers.com/realme-xt/how-to/remove-magisk-module-cause-bootloop-t4093111
Click to expand...
Click to collapse

I tried and it just works without any further gymnastics. Only after reboot I have to open manually viper app. Otherwise everything works

Madhuvrata said:
I tried and it just works without any further gymnastics. Only after reboot I have to open manually viper app. Otherwise everything works
Click to expand...
Click to collapse
Did you do as per above steps ? Or simply install viper app and working fine?
You can enable startup in viper app info setting

I can't find location to delete files. Can somone help please?

Madhuvrata said:
I can't find location to delete files. Can somone help please?
Click to expand...
Click to collapse
Use root explorer.
Then locate the folder
/data/adb/modules/overlayfix
Check if you installed overlay magisk module in magisk
If you have already deleted the folders then chk if viper is working fine

I have ainur narsil installed
Do i need audio modification library module with this?
Thank you.

mido hamdy said:
I have ainur narsil installed
Do i need audio modification library module with this?
Thank you.
Click to expand...
Click to collapse
I think yes..I'm not using ainur.

Hello developers,
I really need your help, I tried installing the viper with the mentioned method, it worked fine, and I deleted the folders/files in overlay fix, but still all my sensors have stopped working, I thought to give a try installing custom ROM would fix this, nothing happened, again installed stock relame UI ROM still no sensor working, please help me how to get it resolved.
Light
Gravity
Gyroscope
Magnetic
Not working...
Please help....
Thanks in advance.

tausif55555 said:
Hello developers,
I really need your help, I tried installing the viper with the mentioned method, it worked fine, and I deleted the folders/files in overlay fix, but still all my sensors have stopped working, I thought to give a try installing custom ROM would fix this, nothing happened, again installed stock relame UI ROM still no sensor working, please help me how to get it resolved.
Light
Gravity
Gyroscope
Magnetic
Not working...
Please help....
Thanks in advance.
Click to expand...
Click to collapse
Which Rui version, which phone model?
Have you installed any other magisk modules?
If you disable the overlay in magisk , gravity gyroscope working?

Hi, Thanks for your response.
I tried disabling the modules.
Right now I am again in Stock rom, Realme UI RMX1921_11_C.05, it has replaced my Orangefox recovery and I have unlocked bootloader.
I remember the fingerprint stopped working after unlocking bootloader and rooting, this is also one of the issue now.
Have gone through net that I should not lock bootloader again or i will end up again in crashing the bootloader.
I know how to flash stock firmware with MSM but it asks for username and password.

tausif55555 said:
Hi, Thanks for your response.
I tried disabling the modules.
Right now I am again in Stock rom, Realme UI RMX1921_11_C.05, it has replaced my Orangefox recovery and I have unlocked bootloader.
I remember the fingerprint stopped working after unlocking bootloader and rooting, this is also one of the issue now.
Have gone through net that I should not lock bootloader again or i will end up again in crashing the bootloader.
I know how to flash stock firmware with MSM but it asks for username and password.
Click to expand...
Click to collapse
Can you try viper method again and try ...delete both viper and overlay in magisk and try..

Alternate to V4A
If someone is looking for hassle free way with alternative for V4A ..Try Wavelet app full version ...Its sounds Engine for bluetooth is top notch almost good as V4A.
optimizations are way good from well know tuned sources to choose from.
Regards,
Diaz M

Hi....I don't have any laptop to format as of now....but today I tried otg and it is also not supporting now. :'(

I've faced 2 things
1. when searching in titanium for dolby can't find 2 items , i found one item named "dolby on 1.1.0"
and freezed it.
2. after installing modules ,opening viper it asks for root permissions that i agreed for it and it rebooted to install drivers , but after reboot it seems the driver not installed and ask for installing again.
What the problem with that ?
My Phone is R5 Pro global 128/4 On update C.05.

Mstf_Ata said:
I've faced 2 things
1. when searching in titanium for dolby can't find 2 items , i found one item named "dolby on 1.1.0"
and freezed it.
2. after installing modules ,opening viper it asks for root permissions that i agreed for it and it rebooted to install drivers , but after reboot it seems the driver not installed and ask for installing again.
What the problem with that ?
My Phone is R5 Pro global 128/4 On update C.05.
Click to expand...
Click to collapse
Follow the steps of installing the magisk modules..Did you delete the folders using root explorer..and enable the overlay ?

akashavel said:
Follow the steps of installing the magisk modules..Did you delete the folders using root explorer..and enable the overlay ?
Click to expand...
Click to collapse
Because i found that Viper driver not installed, i didn't do the next steps.

Mstf_Ata said:
Because i found that Viper driver not installed, i didn't do the next steps.
Click to expand...
Click to collapse
pls do all steps ..If not working follow the C06 steps ..

akashavel said:
pls do all steps ..If not working follow the C06 steps ..
Click to expand...
Click to collapse
Thanks , I'll Try and inform about my experience.