[Q&A] [TWRP 2.8.7.X][ROOT][TAB 4] Install TWRP and ROOT your Samsung Galaxy Tab 4 7.
Q&A for [TWRP 2.8.7.X][ROOT][TAB 4] Install TWRP and ROOT your Samsung Galaxy Tab 4 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TWRP 2.8.7.X][ROOT][TAB 4] Install TWRP and ROOT your Samsung Galaxy Tab 4 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BRoy_98 said:
Hii friends.. Is this helpfull to you?
Click to expand...
Click to collapse
IT came as successfull. but Checked root checker.. no root
busbybabes said:
IT came as successfull. but Checked root checker.. no root
Click to expand...
Click to collapse
Did u follow the rooting process properly..??
BRoy_98 said:
Did u follow the rooting process properly..??
Click to expand...
Click to collapse
Rooting process came as succesful. after that installedSuperSu Zip thro twrp.. rebooted.. but wen i install Root checker the device not rooted..
and Some problem with binary su
---------- Post added at 05:13 PM ---------- Previous post was at 05:07 PM ----------
busbybabes said:
Rooting process came as succesful. after that installedSuperSu Zip thro twrp.. rebooted.. but wen i install Root checker the device not rooted..
and Some problem with binary su
Click to expand...
Click to collapse
repeating it.. SU Binary needs to be updated.this is the thing im getting after installing superuser su.. when i gave Normal update its coming installation failed
busbybabes said:
Rooting process came as succesful. after that installedSuperSu Zip thro twrp.. rebooted.. but wen i install Root checker the device not rooted..
and Some problem with binary su
Click to expand...
Click to collapse
I think this is the problem of the zip u used. Download the SuperSU.zip from the Official Chainfire website and flash it again.
doing it now.. which version should i use.. UPDATE-SuperSU-v1.94.zip? this one? orUPDATE-SuperSU-v2.02.zip?
busbybabes said:
doing it now.. which version should i use.. UPDATE-SuperSU-v1.94.zip? this one? orUPDATE-SuperSU-v2.02.zip?
Click to expand...
Click to collapse
No, use either v2.46 or v2.49. The ones you are asking about are severely outdated.
@BRoy_98 you linked to a very old version of superSU, is that the same one that's in your little root package over on the main thread? If so you should definitely update it to v2.46 (linked to above) because that's going to be the source of a lot of annoying little installation hiccups and confusion. I've seen this issue on other root methods and roms, and updating to the most current version of superSU always helped.
FYI: v2.46 is the latest stable build, designed primarily for kitkat. 2.49 is a beta (very stable), designed primarily for lollipop (when you guys get lollipop, you're going to want to use 2.49 exclusively) but should still work perfectly fine on kitkat
i used the package in the zip.. plz update in the package.. so that future users are not bugged like me..
busbybabes said:
i used the package in the zip.. plz update in the package.. so that future users are not bugged like me..
Click to expand...
Click to collapse
Agreed, @BRoy_98 should really update it to 2.46. @busbybabes , in my last post I linked to v2.46, that should work a lot better for you
thisisapoorusernamechoice said:
No, use either v2.46 or v2.49. The ones you are asking about are severely outdated.
@BRoy_98 you linked to a very old version of superSU, is that the same one that's in your little root package over on the main thread? If so you should definitely update it to v2.46 (linked to above) because that's going to be the source of a lot of annoying little installation hiccups and confusion. I've seen this issue on other root methods and roms, and updating to the most current version of superSU always helped.
FYI: v2.46 is the latest stable build, designed primarily for kitkat. 2.49 is a beta (very stable), designed primarily for lollipop (when you guys get lollipop, you're going to want to use 2.49 exclusively) but should still work perfectly fine on kitkat
Click to expand...
Click to collapse
I will updet my zip package with the updeted SuperSU as soon as possible.
BRoy_98 said:
I will updet my zip package with the updeted SuperSU as soon as possible.
Click to expand...
Click to collapse
Now Im getting rebooted after flashing.. Android is upgrading.. optimising apps..
busbybabes said:
Now Im getting rebooted after flashing.. Android is upgrading.. optimising apps..
Click to expand...
Click to collapse
Now it will work perfectly..!! :fingers-crossed::good:
busbybabes said:
Now Im getting rebooted after flashing.. Android is upgrading.. optimising apps..
Click to expand...
Click to collapse
love u mama.. its rooted.. viola.. heyyyyyyyyyyyyyyyyyyyyyyyyyyyy.. jolly
busbybabes said:
love u mama.. its rooted.. viola.. heyyyyyyyyyyyyyyyyyyyyyyyyyyyy.. jolly
Click to expand...
Click to collapse
Congrats..!!! :highfive::laugh::fingers-crossed:
BRoy_98 said:
Congrats..!!! :highfive::laugh::fingers-crossed:
Click to expand...
Click to collapse
Yours is by far the best thread in the entire net.. Tat too you and thisisapoorusernamechoice came online with help.. love u guys
---------- Post added at 06:04 PM ---------- Previous post was at 05:57 PM ----------
busbybabes said:
Yours is by far the best thread in the entire net.. Tat too you and thisisapoorusernamechoice came online with help.. love u guys
Click to expand...
Click to collapse
roy.. u shud update the SuperSU installer in the Package..
busbybabes said:
Yours is by far the best thread in the entire net.. Tat too you and thisisapoorusernamechoice came online with help.. love u guys
Click to expand...
Click to collapse
Thanks for the compliment. Helping others is always good..!! :fingers-crossed: :good:
---------- Post added at 10:37 PM ---------- Previous post was at 10:34 PM ----------
busbybabes said:
roy... u shud update the SuperSU installer in the Package..
Click to expand...
Click to collapse
Yaa.. I will updet it soon..!!
cool man
---------- Post added at 06:17 PM ---------- Previous post was at 06:11 PM ----------
by far the best thread..
---------- Post added at 06:18 PM ---------- Previous post was at 06:17 PM ----------
why iam not able to reply in the main thread?
busbybabes said:
why iam not able to reply in the main thread?
Click to expand...
Click to collapse
New users have a few restrictions. Are you getting a warning when you reply in main thread ?
Yep.. unable to reply
Sent from my Rooted SM-T231 using XDA Free mobile app
busbybabes said:
roy.. u shud update the SuperSU installer in the Package..
Click to expand...
Click to collapse
Zip updeted with SuperSU v2.46 and TWRP 2.8.7.0 !!
Related
hi guys,
i really need help...i have rooted my galaxy note month ago(odin)...i have decided to factory reset tonight as i wanted to clean my phone....
the problem i have once i have done the factory reset....the phone will boot all over again and again....
can anyone guide me please?
i have tried to restart it in cw mode but no luck
NB: NOT WORRIED TO REVERT BACK TO ORIGINAL...JUST WANT THE PHONE TO WORK AGAIN
had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/
toofank said:
had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/
Click to expand...
Click to collapse
I HAVE MANAGED TO DO EVRYTHING ABOVE EXCEPT STEP 7 WHERE IT SAYS:
Step 7) In CWM recovery just flash the zip file “su-2.3.6.1-ef-signed.zip” from the SDCard.
I CANT SEE zip file “su-2.3.6.1-ef-signed.zip IN CWM I HAVE THE OLD ONE SUPERUSER 3.0.6 ONCE CLICKED STARTS TO INSTAL AND THEN IT SAYS ABORTED......CAN YOU PKEASE CLARIFY?
gdayhtc said:
I HAVE MANAGED TO DO EVRYTHING ABOVE EXCEPT STEP 7 WHERE IT SAYS:
Step 7) In CWM recovery just flash the zip file “su-2.3.6.1-ef-signed.zip” from the SDCard.
I CANT SEE zip file “su-2.3.6.1-ef-signed.zip IN CWM I HAVE THE OLD ONE SUPERUSER 3.0.6 ONCE CLICKED STARTS TO INSTAL AND THEN IT SAYS ABORTED......CAN YOU PKEASE CLARIFY?
Click to expand...
Click to collapse
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
To root just use CF root batch tool from pc. You must find a kernel that is compatible with the rom u just flashed ur phone with. And just run the .bat file and it roots.
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
rooting explained very easily here:
u can download everything u need tehre too.
http://www.androidnz.net/2011/11/at-your-own-risk-how-to-root-your.html
---------- Post added at 03:22 PM ---------- Previous post was at 03:20 PM ----------
toofank said:
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
You must find a kernel that is compatible with the rom u just flashed ur phone
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
the thing is cant get inside the phone to know what kernel i need...therefore installing the su file cant be done...phone is not accessible...computer is not recgognizing the phone ONLY ODIN IS
Click to expand...
Click to collapse
gdayhtc said:
toofank said:
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
You must find a kernel that is compatible with the rom u just flashed ur phone
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
the thing is cant get inside the phone to know what kernel i need...therefore installing the su file cant be done...phone is not accessible...computer is not recgognizing the phone ONLY ODIN IS
Click to expand...
Click to collapse
if odin is recognizing the phone just use odin to flash the phone:
use this rom http://hotfile.com/dl/134454026/e65141a/N7000JPKJ4_N7000OJPKJ3_XSG.zip.html
Click to expand...
Click to collapse
toofank said:
gdayhtc said:
if odin is recognizing the phone just use odin to flash the phone:
use this rom http://hotfile.com/dl/134454026/e65141a/N7000JPKJ4_N7000OJPKJ3_XSG.zip.html
Click to expand...
Click to collapse
man you are legend for helping me, one more thing never flashed a rom on odin, same procedure like above? you click on pda in odin...etc?
please send me a link....real biginner here...used all windows phones b4
Click to expand...
Click to collapse
gdayhtc said:
toofank said:
man you are legend for helping me, one more thing never flashed a rom on odin, same procedure like above? you click on pda in odin...etc?
please send me a link....real biginner here...used all windows phones b4
Click to expand...
Click to collapse
U just use that pda button and press start worked for me.
I am an android noob myself
Click to expand...
Click to collapse
toofank said:
gdayhtc said:
U just use that pda button and press start worked for me.
I am an android noob myself
Click to expand...
Click to collapse
downloading it now...hope it is going to fix this problem otherwise i would be stuffed!!!
Click to expand...
Click to collapse
gdayhtc said:
toofank said:
downloading it now...hope it is going to fix this problem otherwise i would be stuffed!!!
Click to expand...
Click to collapse
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse
toofank said:
gdayhtc said:
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse
it is asking me for password....what is it?
Click to expand...
Click to collapse
toofank said:
gdayhtc said:
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse
gdayhtc said:
toofank said:
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse
gdayhtc said:
gdayhtc said:
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse
dude ..hehe..chill . u must have patience... hehhe
its UAE stock rom ..
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
its not a pre rooted rom but just follow that link i gave u on rooting it. its easy
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
gdayhtc said:
gdayhtc said:
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse
the only reason i got that rom is cuz it can show arabic/persian/urdu etc.... which is not supported by european roms
Click to expand...
Click to collapse
Click to expand...
Click to collapse
toofank said:
gdayhtc said:
dude ..hehe..chill . u must have patience... hehhe
its UAE stock rom ..
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
its not a pre rooted rom but just follow that link i gave u on rooting it. its easy
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
gdayhtc said:
the only reason i got that rom is cuz it can show arabic/persian/urdu etc.... which is not supported by european roms
Click to expand...
Click to collapse
Cuz you are legend! ! ! But if I root in the future how can I upgrade the firmware without having problems like I did?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi ,
Am in the same boat as gdayhtc - Have been using Windows Phones (HTCs) for the past seven years..... got my galaxy note as my first Android Phone.
Yesterday, tried to root the set but in the process got that 'Yellow Triangle' while booting. - was not sure if I did successfully root it or NOT. - as when trying to delete some files under system\ apps using Root Explorer, I got the message that the set was not properly rooted.
But i saw that the kernel version was changed from previous XXKK3 to something else...
Finally, I thought that I will go for a Factory Reset to get everything as it was.
I did not select "Full Wipe" checkbox and proceeded with Factory reset -- The phone rebooted [In fact tried to reboot] and since then is in the BOOT LOOP..... :-(
Now downloading the N7000JPKJ4_N7000OJPKJ3_XSG.zip | 544.7 MB
Let me see how long it takes for me to get my GALAXY NOTE live again..... :-(
toofank said:
had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/
Click to expand...
Click to collapse
@ toofank -- One more noob question - Can we successfully "Factory Reset" our phones after we root them??
Once i am able to reflash my Galaxy Note with " N7000JPKJ4_N7000OJPKJ3_XSG.zip | " method, I am planning to Root the set with the above mentioned Inspiredgeek.com method.
gdayhtc said:
toofank said:
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse
Hi gdayhtc,
I flashed my Note with the 2.3.6 KL3 Rom using ODIN - I followed every step word by word as mentioned in the below link (post) :
http://forum.xda-developers.com/showthread.php?t=1389693
Everything showed success but after the auto reboot - My NOTE is still stuck in the BOOT LOOP.
I flashed it thrice using the same ODIN process and every time it showed "Success" but the result was same every time - stuck in BOOT LOOP.
What did you do after you faced the similar problem........ and after which you posted - It worked....
Please help me in making my Note live again.
Click to expand...
Click to collapse
Dude, I just flashed new ROM, the ROM that I have been advised, basically it is a ROM like any other ROM but you can read Arabic . I flashed it with Odin....and it worked, it eliminated the problem I had
Let me know how you go....
Sent from my GT-N7000 using xda premium
Hello gdayhtc and toofank!
My problem got resolved..... and my Note is back to normal.
I did understand that the UAE Stock Firmware was just like any other Stock Firmware and hence I flashed using the 2.3.6 Kernel XXKL3 Firmware because thats the latest released and also available for India officially..........
What I did was followed dr.ketan's instruction in this post - http://forum.xda-developers.com/showpost.php?p=20776423&postcount=70
I was able to get into recovery mode by pressing the Vol Up + Home + Power button in my Galaxy Note.
I deleted the Cache first... then wiped data/ factory reset.... and then rebooted the phone...........
Bingo...... everything back to normal. - The phone booted normally as it started when i first got it from the store!!!! and the Android version is the latest 2.3.6
Got my Xiaomi Redmi Note last week. Trying to get the thing rooted but it seems that since MIUI 6 that is not so easy anymore.
Currently have
Android 4.4.4
Miui16.2.1 Stable installed.
Not a very experienced user or rooter. But I'd really like to get rid of all the standard installed crap on this phone.
If anyone can point me to a method that works I'd be very grateful.
LX_Emergency said:
Got my Xiaomi Redmi Note last week. Trying to get the thing rooted but it seems that since MIUI 6 that is not so easy anymore.
Currently have
Android 4.4.4
Miui16.2.1 Stable installed.
Not a very experienced user or rooter. But I'd really like to get rid of all the standard installed crap on this phone.
If anyone can point me to a method that works I'd be very grateful.
Click to expand...
Click to collapse
Flash custom recocery and then superuser zip
Jamil69 said:
Flash custom recocery and then superuser zip
Click to expand...
Click to collapse
Let me once again mention that I'm not an expert user but a beginner. So that doesn't really help much.
LX_Emergency said:
Let me once again mention that I'm not an expert user but a beginner. So that doesn't really help much.
Click to expand...
Click to collapse
First go here
http://forum.xda-developers.com/showthread.php?t=2911955
Download philz recovery and flash it throgh "Updater" app. Do this first.
---------- Post added at 11:20 PM ---------- Previous post was at 11:10 PM ----------
And then flash this file
https://mega.co.nz/#!8o9lFZRB!6FKz4WsHrDV1vKoEuHXY3f-vzFgo1ELaZi-EjKpFedA
Throgh custom recovery
Jamil69 said:
First go here
http://forum.xda-developers.com/showthread.php?t=2911955
Download philz recovery and flash it throgh "Updater" app. Do this first.
---------- Post added at 11:20 PM ---------- Previous post was at 11:10 PM ----------
And then flash this file
https://mega.co.nz/#!8o9lFZRB!6FKz4WsHrDV1vKoEuHXY3f-vzFgo1ELaZi-EjKpFedA
Throgh custom recovery
Click to expand...
Click to collapse
that work in a xiaomi.eu 5.2.6 beta rom?..
try to go security->root acces and enable it
it worked for me stock 4.4.4 miui6 v4.12
ajcuao said:
that work in a xiaomi.eu 5.2.6 beta rom?..
Click to expand...
Click to collapse
Works in any android
hi guys!!
need help...
im not good in this stuff...
have galaxy s3 i9305 with android verson 4.4.4 and baseband version i9305xxufoa1!
already make some research on web and i saw i can change my android to lollipop android.
already try but nothing is worked!!
download lot of stuff and try in different ways but nothing!!
SOMEBODY PLEASE CAN HELP MEEEEE!!!!!
THANKS TO EVERYONE!!!!!
vladiperth said:
hi guys!!
need help...
im not good in this stuff...
have galaxy s3 i9305 with android verson 4.4.4 and baseband version i9305xxufoa1!
already make some research on web and i saw i can change my android to lollipop android.
already try but nothing is worked!!
download lot of stuff and try in different ways but nothing!!
SOMEBODY PLEASE CAN HELP MEEEEE!!!!!
THANKS TO EVERYONE!!!!!
Click to expand...
Click to collapse
This process will void your warranty. If you don't care about it so go for it.
First step is to flash a custom recovery through odin. If you know how to work with odin do it and then reply my post if not tell me to give you a tutorial.
JohnSmit268 said:
This process will void your warranty. If you don't care about it so go for it.
First step is to flash a custom recovery through odin. If you know how to work with odin do it and then reply my post if not tell me to give you a tutorial.
Click to expand...
Click to collapse
hi thanks for answer..
i already make flash of my root with odin... and have super su on..
to put on lollipop what i have to do??
vladiperth said:
hi thanks for answer..
i already make flash of my root with odin... and have super su on..
to put on lollipop what i have to do??
Click to expand...
Click to collapse
Use flashify app (on Google play) to flash recovery file. Download it here:https://dl.twrp.me/i9305
oki then....
i downloaded app and file...
next step??
vladiperth said:
oki then....
i downloaded app and file...
next step??
Click to expand...
Click to collapse
Open flashify. Grant it root. And go to flash section choose recovery image and select the file you downloaded to get flashed.
JohnSmit268 said:
Open flashify. Grant it root. And go to flash section choose recovery image and select the file you downloaded to get flashed.
Click to expand...
Click to collapse
oki..
then that file i need to copy on sdcard or internal memory of phone??
vladiperth said:
oki then....
i downloaded app and file...
next step??
Click to expand...
Click to collapse
After you flashed the recovery you need to download a lollipop rom if you already have it no need to. But if you don't, download from this link: https://www.androidfilehost.com/?fid=24269982087008992
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
vladiperth said:
oki..
then that file i need to copy on sdcard or internal memory of phone??
Click to expand...
Click to collapse
No difference just choose it in flashify.
oki.. perfect... done...
ask me to reboot phone.. and i did it... and now i have screen with different options..
oki... i have to download that one...
but i have another one this one: cm-12.1-20150928-UNOFFICIAL-temasek-i9300-V17.3
but im downloading other one
oki..
i have a file...
now?
vladiperth said:
oki.. perfect... done...
ask me to reboot phone.. and i did it... and now i have screen with different options..
oki... i have to download that one...
but i have another one this one: cm-12.1-20150928-UNOFFICIAL-temasek-i9300-V17.3
but im downloading other one
Click to expand...
Click to collapse
Now you have to take a nandroid backup of your phone using your recovery. It is only to avoid unexpected problems that comes with rom flashing. Boot into recovery for this work power the phone off and turn it on using power+home+volume up buttons. Keep pressing them while you are on s3 logo( about 4 seconds ) and then wait to enter recovery now go to backup section tick all and backup them.
JohnSmit268 said:
Now you have to take a nandroid backup of your phone using your recovery. It is only to avoid unexpected problems that comes with rom flashing. Boot into recovery for this work power the phone off and turn it on using power+home+volume up buttons. Keep pressing them while you are on s3 logo( about 4 seconds ) and then wait to enter recovery now go to backup section tick all and backup them.
Click to expand...
Click to collapse
oki perfect... now is backing up!!!...
nealry finish...
finish
vladiperth said:
oki perfect... now is backing up!!!...
nealry finish...
finish
Click to expand...
Click to collapse
Sorry I forgot one download. Download gapps form: opengapps.org be sure to download 5.1 arm gapps you can use any of this type's gapps but you'd better use mini or higher. After this download you can fly to lollipop.
hold on ... if you have a i9305 you cannot flash ROMs from i9300
you're in the wrong section
maultasche said:
hold on ... if you have a i9305 you cannot flash ROMs from i9300
you're in the wrong section
Click to expand...
Click to collapse
Yes he is but he is receiving guides for i9305 don't worry mate
he downloaded Temasek's ROM which is for i9300
JohnSmit268 said:
Sorry I forgot one download. Download gapps form: opengapps.org be sure to download 5.1 arm gapps you can use any of this type's gapps but you'd better use mini or higher. After this download you can fly to lollipop.
Click to expand...
Click to collapse
oki... i start to download gapps 5.1 arm stock and mini..
maultasche said:
he downloaded Temasek's ROM which is for i9300
Click to expand...
Click to collapse
No I gave him the link for i9305 cm 12.1 don't worry.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
vladiperth said:
oki... i start to download gapps 5.1 arm stock and mini..
Click to expand...
Click to collapse
Download only one of em no need for both.
JohnSmit268 said:
No I gave him the link for i9305 cm 12.1 don't worry.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
Download only one of em no need for both.
Click to expand...
Click to collapse
ah oki perfect!!
i have to wait now, its downloading..
and what u think about 5.1 arm super?
vladiperth said:
ah oki perfect!!
i have to wait now, its downloading..
and what u think about 5.1 arm super?
Click to expand...
Click to collapse
These are about your Google apps usage if you use all of em I recommend aroma.
With aroma you can check out the ones you don't need. And I think s3 system space does not have enough storage for super at least on my i9300 it is that way.
hi
i just installed TWRP on a 6.0.1 firmware on a j500fn but i get a line on the screen then the entire screen goes green. BUT i think that the recovery IS working because if i click somewhere it vibrates, like it should. So maybe its a problem with the graphics driver, but i dont know so im here to ask.
edit: dj_steve the lifesaver helped me so delete thread XD
can you share what to do if you have solved it then ?
http://downloads.dmpwap.xyz/rec.tar dj steve sent me this, flashed with odin and worked
theres already an updated recovery a available , but thanks for replying anyway
mitko7411 said:
hi
i just installed TWRP on a 6.0.1 firmware on a j500fn but i get a line on the screen then the entire screen goes green. BUT i think that the recovery IS working because if i click somewhere it vibrates, like it should. So maybe its a problem with the graphics driver, but i dont know so im here to ask.
edit: dj_steve the lifesaver helped me so delete thread XD
Click to expand...
Click to collapse
i encountered the same problem, the twrp wont work with mm. I downgrade to lollypop and the twrp work fine. We had to whait for a new recovery...
---------- Post added at 08:54 AM ---------- Previous post was at 08:50 AM ----------
Pietro007 said:
theres already an updated recovery a available , but thanks for replying anyway
Click to expand...
Click to collapse
can you link it? i cannot find any recovery working with mm...
giock said:
i encountered the same problem, the twrp wont work with mm. I downgrade to lollypop and the twrp work fine. We had to whait for a new recovery...
---------- Post added at 08:54 AM ---------- Previous post was at 08:50 AM ----------
can you link it? i cannot find any recovery working with mm...
Click to expand...
Click to collapse
here you go
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
Pietro007 said:
here you go
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
Click to expand...
Click to collapse
many thx i'll give it a try...
Hi guys,Chinese forum released hydrogen os latest version few days ago,can someone reupload from baidu or any other server.Thanks.
Link:
https://pan.baidu.com/wap/shareview.../YouLinw ROM作品/ZUK_Z2131/Android 7.1/H2OS 3.0
https://drive.google.com/file/d/1s1-1sIGIbtMqbAHNx6_Mmd3vOdTj5kNC/view
This drive Link worked for me.it did not show as corrupted.kindlg verify...
Edit:sorry it is of H2Os 3.0 not new
This is the 4th H2OS thread in this Guide section
Btw here is the link : https://drive.google.com/file/d/1dSu-Uqhx3DWTrjJct7y7hF02fcnithK6/view
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
paps2k3 said:
https://drive.google.com/file/d/1s1-1sIGIbtMqbAHNx6_Mmd3vOdTj5kNC/view
This drive Link worked for me.it did not show as corrupted.kindlg verify...
Edit:sorry it is of H2Os 3.0 not new
Click to expand...
Click to collapse
It's new The dev released the new build for H2OS 3.0 which is v7. And btw this zip has some errors with baseband and boot.img. It is edited by some dev for no super su.
Thank you
What is the last one..some number.seen in settings,status bar settings.
Thanks for the link ill try it
paps2k3 said:
What is the last one..some number.seen in settings,status bar settings.
Click to expand...
Click to collapse
Speed Meter
Btw we have button for thank no need to reply thanks.
Not_James_Bond said:
Speed Meter
Btw we have button for thank no need to reply thanks.
Click to expand...
Click to collapse
btw there is no ill try it button
EAXDA said:
btw there is no ill try it button
Click to expand...
Click to collapse
Lol
Well its great rom almost no bugs. Only thing i hate is supersu cause snapchat detects it and cant login, need root to uninstall chinese bloatware .But works perfect with latest magisk
Cant say nothing about sot rn...
EAXDA said:
Well its great rom almost no bugs. Only thing i hate is supersu cause snapchat detects it and cant login, need root to uninstall chinese bloatware .But works perfect with latest magisk
Cant say nothing about sot rn...
Click to expand...
Click to collapse
Take backup of Snapchat data with titanium backup on unrooted rom(root room after installing sc), then restore anytime on rooted rom, it won't check root stuff
Any link for no-corrupt file?
MaikelAt said:
Any link for no-corrupt file?
Click to expand...
Click to collapse
Check my previous post.
Can we dirty Flash from prev Build ?
hanandewa said:
Can we dirty Flash from prev Build ?
Click to expand...
Click to collapse
Yes Previously we could so it shouldn't be any new.
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
But i recommend clean flash because the zip package formatting had some changes and dev used diff boot.img
Not_James_Bond said:
Yes Previously we could so it shouldn't be any new.
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
But i recommend clean flash because the zip package formatting had some changes and dev used diff boot.img
Click to expand...
Click to collapse
Thanks Bro.
30-01
Any link?
how about camera 2 api??
activated on lastbuild???
masruradi said:
how about camera 2 api??
activated on lastbuild???
Click to expand...
Click to collapse
No
01-02 any link?