Lollipop 5.1 manual update for Moto E 2nd generation LTE 4G (codename Surnia). This can be installed on a stock rom with a unlocked boot loader using TWRP recovery only.
Its the US version. I have UK 5.02 retail and flashed this US version and phone works fine. Language and keyboard settings will remain correct as they were.
Here is the update
Code:
batakang.com/ftp/devs/mhous33/surnia/5.1/3e7549b5cb4fc5c6c922b026a1e84b3749774921.surnia-LPI23.29-15-logo-boot-system.zip
HOW TO INSTALL ANDROID LOLLIPOP ON MOTO E 2015
Important - To install good with no problems(eg. Home Key not work), go into Advanced in TWRP first and select Advanced and select system data cache and fully wipe these first. If you have backed up in Google apps and settings then you will be asked to restore later on.
1. First copy the downloaded files into the internal memory of Moto E 2015 device
2. Now boot your Moto E 2015 into the Recovery Mode to access the TWRP recovery
3. Now go back to the main menu and then chose “Install” then navigate to the folder where you had previously stored the downloaded .zip file. Then start the installation
4. Now select the “Wipe Dalvik Cache and Cache ” and restart the phone
Now your Android Moto E 2015 is running on 5.1 Android Lollipop.
Credit and source Q9Nap forum.xda-developers.com/moto-e-2015/development/fxz-moto-e-lte-xt1527-recovery-t3135210
TWRP sernia recovery
Code:
mediafire.com/download/zxcwob28vjx40pk/twrp-recovery-surnia.img
flash TWRP recovery using:
Code:
fastboot flash recovery recovery.img
To root use SuperSU v2.46
Code:
download.chainfire.eu/696/SuperSU"]https://download.chainfire.eu/696/SuperSU
Install SuperSU with TWRP recovery as well. After reboot run SuperSu app and install the update on google app then run SuperSu to be rooted.
flash TWRP recovery using:
Code:
fastboot flash recovery recovery.img
Actual credit would be to @Q9Nap who made this post in the Android Development section.
Related
Hello. In this thread, i will teach you the easiest method for flashing GPe lollipop 5.1 for xt1033
I am not responsible for dead phones.
Needed:
Time
ADB and Fastboot(thanks to Snoop05 ): https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view
Unlocked Bootloader
Motorola USB Drivers: http://www.motorola.com/getmdmwin
DOWNLOADS:
GPe lollipop flashable zip(thanks to lost101 ): http://forum.xda-developers.com/devdb/project/dl/?id=11835&task=get
TWRP Materialized 2.8.7.0 for GPe(thanks to h2o64 ): https://mega.nz/#!IgUxkKJR!uMI38IeG-_n0FjUqQleDxsu3HGPjvyT8-3J-IppQrAI
No GPS fix flashable zip(thanks again to lost101 ): http://forum.xda-developers.com/attachment.php?attachmentid=3305624&d=1431252683
Modem fix(thanks to aybarchu ): http://www.mediafire.com/download/3ll0q1lwa1rd26r/Lollipop.rar
Recommenned memory leak fix(thanks to xpirt ) : https://mega.nz/#!zcFU3L6T!jbSK3G9Hz4Utg4p9oazmU-Glv295gKZXiMoSjjY8xDg
GUIDE
1: Your bootloader version should be 41.18
2ut your phone in fastboot mode( if you are rooted, you don't be needed to use fastboot. Flash the twrp img with Rashr or Flashify app) and flash the recovery.
3:Boot the recovery
4: (Recommenned)Take a nandroid backup and put it in safe place. BECAUSE ALL YOUR DATA WILL BE DELETED!!!
5:In TWRP,click to wipe
5.1:Select everything except USB OTG, swipe to wipe and go back to wipe menu when its finished
5.2:Click to advanced wipe , select data partition and click fs options.
6:Click to change fs and select EXT4 and swipe
7:Connect your phone to pc. PC will recognise your phone as XT1032 if you havent disabled mtp on TWRP.
You can use 8a,8b or 8c.(Only one of them)
8a:Copy the GPe 5.1 zip and memory leak fix zip(if you want) to XT1032's internal storage.
8b:Use adb sideload commands when you selected in recovery "Advanced/ADB Sideload"
8c:Use USB OTG and flash memory.
9:Flash Them
10: When flashing finished,click wipe caches and wipe cache/dalvik.
11:Reboot.
12:When your phone turned on, turn it off and go to fastboot.
13:Click NETWORK FIX.bat in the lollipop folder and reboot.
14:Check the GPS. İf it isnt working, flash no gps zip,wipe cache/dalvik and reboot
ENJOY THE SMOOTH LOLLIPOP
I have tested all of the guide with my XT1033.But I am not responsible for dead phones.
Sorry for corrupt English
TIP: You can use Spirit2 fm radio app for real fm radio. It is working perfectly with rooted GPe 5.1
Hi i was about to update my phone and setting it to factory in order to update it to Oxygenos last version since i still using oxygen2 (andoid 5) etc...
I was about to do a twrp backup however i do no thave enought space so i've read on internet that with twrp 3.1+ you can backup directly on pc. I've tryed to update twrp however its not working and not starting the recovery partition. I've read that : (3.0.2-1 and above for OxygenOS 3.x and above) (3.0.2-0 and below for OxygenOS 2.x and below) however i need the updated version to backup directly on pc what can i do? some advice? i've looked for a modified version of twrp 3.1 for oxygenos2 but i did not find it :S
Before you do this, update TWRP via these instructions
https://wiki.lineageos.org/devices/oneplus2/install
skip down to this line "Installing a custom recovery using fastboot" as you do not need to unlock the bootloader as it is already unlocked since you have TWRP already.
Do not make a TWRP backup, It will not be of any use once you move to OxygenOS 3.6.1 since the backup will be of Nouget (android 5). The best way to upgrade would be to follow the steps here http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.6.1/
Once you get to step 4, click the "View Instructions for TWRP Recovery" link then you can either dirty flash or clean flash the zip. I would recommend clean flashing, as in do the factory reset as mentioned in the second paragraph under step 4. However, do not directly flash the rom afterward, use the reboot option in TWRP to reboot into recovery then flash the zip.
NOTE: If you want to use Magisk to pass SafetyNet and have root, download the Magisk zip and flash after flashing the rom, or queue it to it flashes right after the OOS rom.
afterward let the phone boot up then do the setup. Once you have completed setup, enable developer settings and enable advanced reboot. use reboot into recovery to boot into TWRP
Now go ahead and make a TWRP Backup, This backup will be your Go-To backup if you want to go back to factory OOS 3.6.1 with the setup completed and Magisk already installed.
Not able to backup
The problem is that the last version of TWRP working on oxygenos2 is 3.0.2-1 and you can not make the backup directly on computer, i've traied toupdate twrp and it does not lounch however with that version of twrp (3.0.2) or before it works that was the point if there was any modified twrp for oxygenos2 and with twrp version 3.1 or higher.
TWRP v3.x.x doesn't work with oxygen 2.
There's no way to boot TWRP v3 without installing oxygen 3.
If you need to backup your files (pictures, videos, WhatsApp messages etc.) you don't need TWRP because it backups only your system and your apps.
So simply attach your phone to your PC and copy all your files.
If you need a copy of your system then you need to free some space on your phone and do a backup with TWRP v2
*** Sorry, my English isn't good ***
Hi, I have a problem with OP5, I decided to install OOS 8.0 (Beta), I had OOS on 7.1.1 (Root) (TWRP), I made full wipe in TWRP and installed OOS 4.5.14 (7.1.1), after that i get Stock Recovery and Iupgraded OOS to 8.0 (According to the OnePlus manual) -> Bootloop. I decided to go back to 7.1.1 -> Error, I uploaded TWRP and another attempt to download 7.1.1 -> The system got up but I can not do anything because I have an error "Udecrypting the device. (Write to do "Factory reset"), so again to TWRP -> Full Wipe and here is interesting, I get my error "Wrong argument", the phone does not see my built in memory (I write that I have 0mb), what can I do in this situation? Anyone know?
ERROR in TWRP: "Unable to mount storage"
Please help me.
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
themasv said:
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
Click to expand...
Click to collapse
Thank you for that link. I was having another issue - the TWRP downloaded from the official site didn't work on the latest Oreo beta build and didn't overwrite the stock recovery and couldn't mount /data. This one did.
yeah im having major issues with mine, im now stuck in a download mode i cant get out of !
The first question is, you want to go Oreo or return nougat? In the first case, go to the dedicated thread, download the black TWRP and format data (if you can't read anything) reboot to TWRP again now copy the Oreo firmware and install it from the same recovery, reboot to recovery again if you don't have the stock one automatically installed, just flash it via TWRP. So once you're in stock recovery format EVERYTHING, reboot to system, and after you've configured the initial setup of your device if you want reboot to bootloader and reinstall the black TWRP and flash magisk 14.56 for root.. I've done this for getting this Oreo rom works
Exactly happened with me too. I even accidentally deleted all the contents of my storage. Tried to sideload via adb but got unknown device error. This thread worked for me
https://thedroidguru.com/how-to-unbrick-oneplus-5-phone-with-official-tool/
ive just restored the latest nougat firmware/radios and jumped back onto an aosp build until op5 gets official Oreo build
I've been getting bootloops after installing Magisk on my OnePlus 5 unlocked bootloader , rooted before at 4.5.15.
I directly updated it to 5.0.2 which resulted in many errors in the end had to flash it completely and then clean install the ROM .
The ROM works perfectly with almost no trouble.
I then flashed almost all Magisk versions I could get hold of (14.5,15.2,15.3,15.4(beta))
But none of them could get past the boot animation.
I've also flashed the no Verity mod file both before and after the flashing of Magisk nothing worked.
But everytime after all this I flash the Magisk uninstaller and I get easily get back to using the device but without root.
Anyone help me rooting this ?
The ROM has been downloaded from official OnePlus website and the twrp I'm using is the codeworkx version.
First do this then tell me how it went.
1. Boot to fastboot and flash twrp-3.2.1-0-universal-codeworkx-cheeseburger.img via command window, make sure you have adb installed on pc.
2. Then boot DIRECTLY to twrp.
3. Dirty flash OOS 5.0.2 over your current rom in twrp and then wipe dalvik and cache.
4. Then boot into fastboot DIRECTLY again and flash twrp-3.2.1-0-universal-codeworkx-cheeseburger.img again.
5. Boot into twrp directly and flash Magisk 15.2.zip
6. Finally boot into the system.
7. Optional: then you can go ahead and update Magisk via it's own flash tool.
I'm already on 5.0.2 so do I dirty flash it again?
So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
There are 2 methods, use Method A if you don't have a custom ROM installed and still use OxygenOS. Use Method B if you are using a custom ROM and want to have another one:
Method A: From OxygenOS to CustomROM
1. boot in twrp
2. in twrp, do a factory reset
3. flash latest oos zip(flashable ota, link will be below)
4. flash twrp installer zip(i recommend mauronofrio´s twrp, link wil be below)
5. check current slot, then reboot in twrp
6. check if slot changed, then do a factory reset
7. flash latest oos zip
8. flash twrp installer zip
9. reboot recovery, and check if slot changed
10. factory reset
11. flash custom rom zip
12. flash twrp installer zip
13. reboot twrp(check current slot)
14. check if slot changed(if yes:it worked, if no:repeat)
15. additional: flash magisk&gapps
then,your rom is ready to use
Method B: From Custom ROM to another Custom ROM
1. reboot to twrp
2. in twrp, do a factory reset
3. then select advanced wipe: wipe system,cache,data. DON’T WIPE VENDOR
4. flash custom rom zip
5. flash twrp installer zip
6. check which slot you´re in
7. reboot twrp
8. if slot changed, everything worked
9. flash gapps and magisk if you want
then, your rom is ready to use
So, I hope I have spared you many problems and wish you much fun with your Devices.
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here
DirtryElectro said:
So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
.......
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here
Very important note: Download the FULL OTA, not the local-upgrade OTA!
Click to expand...
Click to collapse
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
these are just the steps which worked for me, but ok
DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
this helped me greatly! following the instructions above had my files corrupt when id factory reset. i dont have an otg usb. so the instructions above kind of troubled me. again, thank you!
Beefybeardedbear said:
this helped me greatly! following the instructions above from OP had my files corrupt when id factory reset. i dont have an otg usb. so the instructions from OP kind of troubled me. again, thank you!
Click to expand...
Click to collapse