Related
Hi, I was switching rom cuz of many errors and I stucked on TWRP. Im able to enter download mode and adb and internal storage via PC. Whenever Im trying to flash new ROM twrp just restarts. I search whole the forum and no one of guide work for me. Additional full wipe and hard reset doesnt remove previous system. When Im connecting to lg mobile flash he says that I have still OptimusROM. Please help me
@edit:
After a few hours I find a simple solution. If u got the same situation like me just lanuch adb via cmd and write "adb reboot fastboot". After u can restore stock with LG flash tool. Just be sure that u have .kdz file in the same direction.
Xematos said:
Hi, I was switching rom cuz of many errors and I stucked on TWRP. Im able to enter download mode and adb and internal storage via PC. Whenever Im trying to flash new ROM twrp just restarts. I search whole the forum and no one of guide work for me. Additional full wipe and hard reset doesnt remove previous system. When Im connecting to lg mobile flash he says that I have still OptimusROM. Please help me
@edit:
After a few hours I find a simple solution. If u got the same situation like me just lanuch adb via cmd and write "adb reboot fastboot". After u can restore stock with LG flash tool. Just be sure that u have .kdz file in the same direction.
Click to expand...
Click to collapse
Given what you're saying, I'm guessing you're using at least 1 f2fs partition in the custom rom.
This has caused TWRP to panic and reboot for a few people (myself included) when trying to reformat f2fs partitions. The only way to fix that is like you're doing, or wiping the affected partitions back to EXT4, then going back to f2fs if you REALLY want to use it. The reason that this would cause the reboots on install, is because one of the first things most roms do is format cache.
Hello. Sorry for my english. I want flash my phone via rootjoy to Arcatarc's MIUmIZERO and i only can see miui logo. next i want back to stock rom from needrom via sp flash tool, i followed instructions and i stop, when red status back not change for 20 minutes. and i can't charge my phone, can't conected to pc, can't turn on, looks like dead. How unbrick my phone? please help
problem solved
how did you solve it? please let me know as i am in the same boat
If it's stuck on the MIUI screen then it's possible the bootloader wasn't flashed properly.
If you can reboot the phone in fastboot you can flash the bootloader via PC.
it is dead . the phone wont turn on . the pc wont recognise it anymore , it was fine ... untill i tried to flash stock through sp flash tool .
i was running antarcts emui,.... tried flashing using the method on umi digi forum : http://umidigi.com/forums/topic/how-to-restore-rom-version-3-03-2/ ... preloader was unticked, and when i tried firmware uopgrade option...nothing happened, and the phone was dead after that.
thepopos said:
If it's stuck on the MIUI screen then it's possible the bootloader wasn't flashed properly.
If you can reboot the phone in fastboot you can flash the bootloader via PC.
Click to expand...
Click to collapse
I managed to make it boot.
The problem is I have twrp and some chinese recovery . And I cant go back to stock.
Fastboot cant flash recovery for some reason ... so I can go back to rootjoy.
use adb side load an try to flash a working rom, the original one from umi website or emui.
can you get in recovery mode? volume (+ or - try both) and power button for some seconds
if yes go adb side load, (check google) and transfer an original rom, then flash it again in the recovery
My Umi Zero is bricked, because I cannot mount /system. I can get into the TWRP, but I cannot do anything, even restore my backup because of this. Does anyone have idea what to do?
Pospa420 said:
My Umi Zero is bricked, because I cannot mount /system. I can get into the TWRP, but I cannot do anything, even restore my backup because of this. Does anyone have idea what to do?
Click to expand...
Click to collapse
If the system is unstable with popups etc or with damaged partitions you can get past that with TWRP.
Boot into recovery Wipe/Advanced Wipe. Then after that is completed, without rebooting, Format Data. That should sort out your partitions.
Then Install ROM from the recovery. It will need to be on the device. If your new ROM is not already there plug in a USB lead and transfer the zip file from your pc.
If you want to re-install your backup, do that instead.
If that doesn't work Backup in TWRP, even though there is no system. Then copy your Nandroid backup (must have been made via TWRP) and paste into the same folder as the Backup you just made, overwriting if asked.
I have had to do all this myself!
Good luck
Hi all!
I have the simular problem.
Umi Zero can not start.
But recovery seems to be working.
1) TWRP recovery 2.8.2
After full wipe, my TWRP recovery write "Unable to mount /SYSTEM"
The same message I have if I try to flash original 3.10 ROM via TWRP.
It is impossible to mount or format or repair SYSTEM via recovery
But it is possible to see files in FileManager and go to Fastboot and ADB mode
2) ADB and Fastboot mode.
Impossible to flash any partition.
"boot" - checksum error
"recovery" - "not support flash" message
"system" - filesystem created, start "erasing" and freeze. If I disconnect phone, have got message "failed (too many links)"
adb sideload does not work also
3) SP Flash Tool
I tried with full 3.10 ROM and with CRT 3.0 recovery
Download mode and Format+Download mode.
The same result: yellow bar finished and got message "Checksum error" or something like that.
All this experiments change nothing in phone. I still have TWRP recovery and "unable to mount /SYSTEM" message.
Any advices?
I am not English-speaking guy, as you guess), sorry.
It looks like memory become write-protected...
YrP said:
Hi all!
I have the simular problem.
Umi Zero can not start.
But recovery seems to be working.
1) TWRP recovery 2.8.2
After full wipe, my TWRP recovery write "Unable to mount /SYSTEM"
The same message I have if I try to flash original 3.10 ROM via TWRP.
It is impossible to mount or format or repair SYSTEM via recovery
But it is possible to see files in FileManager and go to Fastboot and ADB mode
2) ADB and Fastboot mode.
Impossible to flash any partition.
"boot" - checksum error
"recovery" - "not support flash" message
"system" - filesystem created, start "erasing" and freeze. If I disconnect phone, have got message "failed (too many links)"
adb sideload does not work also
3) SP Flash Tool
I tried with full 3.10 ROM and with CRT 3.0 recovery
Download mode and Format+Download mode.
The same result: yellow bar finished and got message "Checksum error" or something like that.
All this experiments change nothing in phone. I still have TWRP recovery and "unable to mount /SYSTEM" message.
Any advices?
I am not English-speaking guy, as you guess), sorry.
Click to expand...
Click to collapse
Hi
Did you Advance Wipe and Format Data?
I found that worked.
Alternatively, you could use Rootjoy to put just about any ROM on. CM 12.1 works ok.
Once you have a stable installation, install a custom recovery like TWRP 2.8.7 from Needrom. I used Mobileuncle, an app from the Playstore. However, I looked just now and it doesn't seem to be available.
I have tried Rashr, but couldn't get it to work.
Once you have it all stable you can flash the ROM you really want via TWRP.
Good luck
Advance Wipe and Format Data or flashing new stable ROM via TWRP did not work for me. The same result- unable to mount /system.
Rootjoy and Mobileuncle could be used if phone is working. My phone works in recovery mode only.
I tried to flash different recoveries but did not find the way to do this. As I wrote, Sp Flash Tool, Fastboot and Adb Sideload did not make any changes to my recovery. I think, flash new recovery will help if I found the way)
Or if I discover the method to test and\or repair /system partition from PC
But thank you for answer)
@YrP
Rootjoy works from your pc
Yes, Rootjoy- works)
But for establish connection phone must work too.
And not in recovery mode.
@YrP
I have already done all this with my daughter's Zero.
However, it's in bits at the moment while we wait for a part from China. So I can't go through the process with you live, step by step.
I am in the UK.
If you send the phone to me I will try and fix it for you.
PM me if you want to go ahead and I will let you have my address.
I am in Ukraine, it is too far from UK)
I will keep trying to find the way to fix it by myself.
But thank you very much for your attention and advices.
@YrP
I have got my daughter's phone back together and fixed (mostly).
Did you manage to get your Zero going?
Sent from my Nexus 4 using XDA-Developers mobile app
@goldbear
My UMI is still bricked(
It is flash memory problem, I think.
I am trying to find the tool to remap internal memory, to move SYSTEM part to other physical place. But did not find it yet.
What was your way?
Zero stutters, processes crash or the phone will not boot into System
Have you already tried a Factory Reset or re-installed the ROM?
What can you do?
You could try the following. However, if your phone blows up, orders a takeaway or elopes with your girl-friend, please don’t blame me.
1. Provided you already have TWRP custom recovery installed and your phone is powered down boot into Recovery: hold the volume down and power buttons until the Zero logo appears then let go
2. Select Wipe/Advanced and select Dalvik Cache, System, Cache and Data. Slide to execute
3. Select Format Data/ type yes and slide to execute
4. Reboot into Recovery without installing a new ROM
5. Select Backup, choose SD card rather than internal storage and give the file a memorable title like Blank Backup and date. Select Boot, Logo, Recovery and Uboot. Slide to execute
6. The next step requires you to have a Nandroid backup made via TWRP already made of a stable ROM. If it isn’t stable or you don’t have one I have attached a clean backup below. It’s derived from Cyanogen Mod 12.1. This is based on Lollipop 5.1, with Gapps and rooted. I have found this to work. As the title of the file suggests, it’s a factory reset, ie no personal data included. Download it to your pc unzip and save it.
7. Connect your phone to your pc via USB cable and open Windows Explorer
8. Find your stable backup or the one below and drill down until you see the folder with 15 files, starting with data.info and ending with uboot.emmc.win. Select all and Copy.
9. Open another window and find the TWRP folder on the SC card of your phone. Drill down to the same folder containing similar files as to step 8 above. Click in folder and Paste. When prompted select Copy and Replace, all and Ok
10. If your pc doesn’t show your phone and the SD card, in recovery select Mount and USB storage.
11. In Recovery select Restore and the Blank Backup (or whatever file name you gave it, now populated with usable ‘data’). Slide to execute
12. Give it time to load and boot up
13. You should be good to go!
If you don’t like CM 12.1 installing a new Launcher from the Playstore, like Cheetah will make it run smoother. Everything after that is down to you.
Of course, you could flash another ROM via TWRP
The backup below was made via TWRP 2.8.6. This is also attached below. You can install this via a previous version of TWRP as an image. Unzip it first.
Assuming this doesn’t wreck your phone and you like the guide please click Thanks below.
https://drive.google.com/file/d/0ByoLjFrSKxLwc01UUWZBZEQtbWs/view?usp=sharing
https://drive.google.com/file/d/0ByoLjFrSKxLweGhqNGJuVGV1a0U/view?usp=sharing
Hello all,
I really need help for my ZE500KL. In summary, it stucks on ASUS logo and bootloop. I can't get to welcome screen.
It is not rooted, i've never touched to the original system. I got this problem after an update from OTA. The update was not interrupted for information.
I can get to the recovery menu, can do a wipe data/factory reset, but it solves nothing. Same problem.
I've tried :
- apply update from adb but this stops at 46% and failed with an error like E:failed to verify the whole-file signature
- apply update from microSD but it stops and failed without error message
I don't know if there is another way to fix.
Thanks
Bro go to the asus site and download the whole rom nd flash it thru recovery.
M also had a same problem.
So let me know nd which variant u hav?
Thanks for the reply.
When i said "I have apply update", this means that i've downloaded zip file from Asus website, and loaded it via the recovery but the process stops at 46%.
Maybe it will work for a custom recovery like CWM or TWRP but as i know, there is not a working CWM or TWRP for ZE500KL at this time. Maybe.
For me, the stock recovery don't work for loading the zip file from ASUS. It says something like : Unable to verify the whole-file signature, Process failed
Fus_XDA said:
Thanks for the reply.
When i said "I have apply update", this means that i've downloaded zip file from Asus website, and loaded it via the recovery but the process stops at 46%.
Maybe it will work for a custom recovery like CWM or TWRP but as i know, there is not a working CWM or TWRP for ZE500KL at this time. Maybe.
For me, the stock recovery don't work for loading the zip file from ASUS. It says something like : Unable to verify the whole-file signature, Process failed
Click to expand...
Click to collapse
If your device stops at logo this means that it boots into fastboot mode. I`ve had a same problem. You can take this adb driver . After installing you need to put in C:\adb file boot.img from archive which you dowloaded from official asus.com, then run cmd.
Code:
cd c:\adb
and last command will be...
Code:
fastboot boot boot.img
try it.
kvantor said:
If your device stops at logo this means that it boots into fastboot mode. I`ve had a same problem. You can take this adb driver . After installing you need to put in C:\adb file boot.img from archive which you dowloaded from official asus.com, then run cmd.
Code:
cd c:\adb
and last command will be...
Code:
fastboot boot boot.img
try it.
Click to expand...
Click to collapse
I tried. It doesn't work.
I proceed like this :
1- I've booted the device in recovery mode, connect it to PC and uninstall the device and his driver in to the device manager. I do the same in fastboot mode
2- I've installed the 15 seconds adb ver 1.43. As it is recommanded, I force install of drivers to "Android ADB interface" for recovery mode and "Android Bootloader Interface" for fastboot mode. At this time, adb detects the device via "c:\adb> adb devices"
3-I've extracted the "boot.img" from UL-ASUS Z00E-WW-12 8 5 106-user.zip from Asus Website
4-No problem to proceed with "c:\adb> fastboot boot boot.img" BUT that's all.
--> The device boots, passes the ASUS logo with the powered by android at the bottom", arrives to the second ASUS logo (the one animated), then there are messages "Android upgrading, optimising 1 of 1 app", "Starting apps", then it reboots, and bootloops .... again and again. I have to take out the battery to turn it off.
Have you tried downloading the full ROM image from the ASUS support website again? (yes, download again and try flashing your device again). Usually when it says something about signature verification failed, it is due to the incomplete download of the ROM image (corrupted), or that it has been modified.
Do report back the results.
Download Link (for your convenience): http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500KL/UL-ASUS_Z00E-WW-12.8.5.222-user.zip
Download Link (for your convenience): http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500KL/UL-ASUS_Z00E-WW-12.8.5.222-user.zip
Click to expand...
Click to collapse
I's been thinking to this ...
I've downloaded 3 times the ROM from asus website. The download procees has been interrupted because of internet problem but i was able to resume after. I've even downloaded previous version. I am able to extract the zip file to my computer without error like cooupted file or CRC..
I need to know if other persons have the same problem exactly with this ZE500KL because, i have recently done the same thing with my ZE551ML and i had no problem.
Have you tried flashing the previous updates (software versions) instead? Could be a "bogus" update.
Rizzed said:
Have you tried flashing the previous updates (software versions) instead? Could be a "bogus" update.
Click to expand...
Click to collapse
Yes. Same problem with .172
I was been delighted when i see this TWRP for ZE500KL http://forum.xda-developers.com/zenfone-2-laser/development/recovery-twrp-3-0-0-0-recovery-t3319704 and it works,
But my joy was so short.
It says that it was unable to install the ZIP file because the ZIP is for WW_PHONE, and my phone is an OMNI_ZE500KL !!! What is this ? Never heard about it before. What's weird with this AUS ZIP file !!!??
Can you try to ADB Sideload the ASUS ROM?
sagematt said:
Can you try to ADB Sideload the ASUS ROM?
Click to expand...
Click to collapse
Yes. I've tried every way to install.
Fusxda said:
Yes. I've tried every way to install.
Click to expand...
Click to collapse
Open a thread on ZenTalk: http://www.asus.com/zentalk/
Never heard about this OMNI SKU before.
If someone else has the same exact phone with you with a different SKU (perhaps WW?), you could try asking him to backup the recovery.img on his phone for you to flash. After that, just flash recovery via fastboot and you should be good to go.
up
Rizzed said:
If someone else has the same exact phone with you with a different SKU (perhaps WW?), you could try asking him to backup the recovery.img on his phone for you to flash. After that, just flash recovery via fastboot and you should be good to go.
Click to expand...
Click to collapse
Hello , do you find the solution i have the same problem
could you help me , thanx a lot :good:
2xboy said:
Hello , do you find the solution i have the same problem
could you help me , thanx a lot :good:
Click to expand...
Click to collapse
Stock recovery (and TWRP):
https://github.com/sabpprook/android_device_asus_ze500kl/releases
Guys I Found The Solution For This Problem :
1-Flash TWRP Recovery From The Link : https://github.com/sabpprook/android_device_asus_ze500kl/releases
2- Wipe Data and Cache And dalvik Cache and Very Important (Wipe System).
3-Flash Back The Stock recovery From The Same Link Above.
4-Flash Your .zip Stock Frimware From The Link : https://www.asus.com/support/Download/39/1/0/20/KsY29RCpsJ2bea9O/32/
5-Please if this Helped You Press Thanks! Button And Enjoy.
The Trick: Stock Recovery Cannot Wipe System But TWRP Can.
P.S: You Cannot Flash The Frimware From TWRP ... It Will Give An Error.
Enjoy
I find answer
Bro, download this file failobmennik.usite.pro/updater-script.noext and change \META-INF\com\google\android\updater-script
Hi,
I'll test it, and will give feed-back
Thanks
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
TWRP: https://dl.twrp.me/karate/twrp-3.1.1-1-karate.img
Gapps: http://opengapps.org/ (ARM64)
J.D.M said:
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
Click to expand...
Click to collapse
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Crolys said:
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Click to expand...
Click to collapse
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem. Remembering that in the site https://dl.twrp.me/karate/ has two versions of TWRP, the version twrp-3.1.1-0-karate.img is 32bits and the version twrp-3.1.1-1-karate. img is 64bit.
J.D.M said:
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem.
Click to expand...
Click to collapse
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Crolys said:
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Click to expand...
Click to collapse
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Crolys said:
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Click to expand...
Click to collapse
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
got same 255 error,just now i reflashed stock rom and issue resolved
vasu009 said:
got same 255 error,just now i reflashed stock rom and issue resolved
Click to expand...
Click to collapse
how did you reflashed the stock rom, please reply cause im stuck with the twrp and unable to do it. my phone doesn't have an os now
what s the password of the trwp
J.D.M said:
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
Click to expand...
Click to collapse
Can install this ROM on any Lenovo K6 Power device ??
dushd95 said:
Can install this ROM on any Lenovo K6 Power device ??
Click to expand...
Click to collapse
Yeah
J.D.M said:
Yeah
Click to expand...
Click to collapse
It says device not supported why??
Dont forget to reboot again into twrp - after flashing 64bit twrp . This is a step that is very important if you will not reboot your phone into twrp after flashing 64 bit twrp then , it will keep showin you the error 255.
So check that .
wacccim said:
what s the password of the trwp
Click to expand...
Click to collapse
Go for 3.2.1.0 it is better then 3.1.1.1 in 64 bits it ain't ask password i use it to flash all roms
Tere 3.1.1-1 asking for password to encrypt data
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Erase the data
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
Use erase the data from wipe option then you will be able to install rom and g-apps.
Every time you will need password, I don't know why but after erasing data you install all files otherwise you need to erase data again and again
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
I Faced same problem. It's ok that your phone is in weird state for time now. And also possible to recover.
Hopefully you have adb-tool, custom-rom & gapp, twrp.img on your PC.
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
fastboot oem reboot-recovery
3)Wait for mobile to boot in to recovery mode with TWRP
Now need to flash custom-rom followed by gapps installion.
I) You can use pendrive with otg to flash custom-rom followed by gapps
OR
II)You can use phone storage/SD card to flash the custom-rom followed by gapps
OR
III)adb sideload command as fallow
a)In TWRP recovery on mobile, goto Adavanced->ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify custom rom path inside ""
adb sideload "C:\adb\images\MyCustomROM.zip"
Have a patience to complete the operation.
Click back for Adavanced Menu again.
b) Select ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify Gapp path inside ""
adb sideload "C:\adb\images\open_gapps-arm-7.1-pico-20180611.zip"
c)Have a patience to complete the operation.
Once complete go to TWRP Screen.
d)Now go back TWRP main menu & select wipe->format Data.
Go to Reboot->system.
How to install TWRP if no OS there
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
a) To check the device is connected to PC or not
fastboot oem device-info
b) To flash the recovery. Give twrp path inside the ""
fastboot flash recovery "C:\adb\images\twrp.img"
c) To boot into recovery mode
fastboot oem reboot-recovery
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
In my case, It worked with PIN.
Okay I have a few problems going... here is what I have and have tried and the issues I have been having... I have log files and such saved too should you need those.
Synthoms: LGK20 PLUS aka TP260
- I needed a Binary update for SU... (never did get that to work) Somehow afterwards my phone would only reboot into Twrp Recovery on boot loop.
-I installed an Update SU file ( also didn't work) then the phone started booting into only fastboot.... ( I had a brief issue of it not connecting on ADB but I hade to just end task adb in the task menu (Crtl Alt Del in case somebody has same problem) Afterwards connected no problem.
-I have wiped datas and cache and all sorts of instuctions to no avail.. lol
_phone now boot immediately to fastboot but I am able to get to twrp recovery just fine
Whats Weird:
-I can see the device on the computer get onto the sd card add files and zip files and the computer recognizes it n o problem at all... but LG MOBILE SUPPORT LGUP LG Bridge and LG Flash Tool.... all do not recognize my phone.
-But no matter where I partition anything and no matter what recovery img or zip file I install... it just only wants to open into fastboot.... I'm sure it is a very simple operation to fix... maybe one of you have a restore file can put on the SD with mine that have done me no good? Any help would be appreciated hardcore lol and I appreciate the learning experience a per i have learned a lot..
Heres what I have collected in my attempts
A: I have a Twrp.img and Recovery.img (not sure if they are a recovery or boot partition)
B: I have ADB it connects to my device fine and I can even flash onto the phone but seems to not be helping lol
C: : LG Bridge and LG UP do not see that my phone is connected (all my drivers are updated)
D: I have a stock KTZ file for my phone but I have no programs to flash it except adb (the others will not recognize my phone except ADB
E: I am very sure Xposed may have something to do with this... I downloaded an uninstaller and the zip file will not flash error 555 or something like that.
F: I'm very sure I need a Boot.img?? this I know little about but I have a program to build one if I can figure out how lol.
G: My recoveries did not work :0(
H: None of my SU zips seem to be working (is why I believe Xposed is behind it lol.
I: There are commands you can put into the terminal in TWRP recovery ( I can get there will explain further later) to disable Xposed but they say to create a folder name \data\data\....ect ect... There is no way that the TWRP recovery will let me create folders so I'm at a loss there.....
Hey..,..,..,
JamieAndrew7012 said:
Okay I have a few problems going... here is what I have and have tried and the issues I have been having... I have log files and such saved too should you need those.
Synthoms: LGK20 PLUS aka TP260
- I needed a Binary update for SU... (never did get that to work) Somehow afterwards my phone would only reboot into Twrp Recovery on boot loop.
-I installed an Update SU file ( also didn't work) then the phone started booting into only fastboot.... ( I had a brief issue of it not connecting on ADB but I hade to just end task adb in the task menu (Crtl Alt Del in case somebody has same problem) Afterwards connected no problem.
-I have wiped datas and cache and all sorts of instuctions to no avail.. lol
_phone now boot immediately to fastboot but I am able to get to twrp recovery just fine
Whats Weird:
-I can see the device on the computer get onto the sd card add files and zip files and the computer recognizes it n o problem at all... but LG MOBILE SUPPORT LGUP LG Bridge and LG Flash Tool.... all do not recognize my phone.
-But no matter where I partition anything and no matter what recovery img or zip file I install... it just only wants to open into fastboot.... I'm sure it is a very simple operation to fix... maybe one of you have a restore file can put on the SD with mine that have done me no good? Any help would be appreciated hardcore lol and I appreciate the learning experience a per i have learned a lot..
Heres what I have collected in my attempts
A: I have a Twrp.img and Recovery.img (not sure if they are a recovery or boot partition)
B: I have ADB it connects to my device fine and I can even flash onto the phone but seems to not be helping lol
C: : LG Bridge and LG UP do not see that my phone is connected (all my drivers are updated)
D: I have a stock KTZ file for my phone but I have no programs to flash it except adb (the others will not recognize my phone except ADB
E: I am very sure Xposed may have something to do with this... I downloaded an uninstaller and the zip file will not flash error 555 or something like that.
F: I'm very sure I need a Boot.img?? this I know little about but I have a program to build one if I can figure out how lol.
G: My recoveries did not work :0(
H: None of my SU zips seem to be working (is why I believe Xposed is behind it lol.
I: There are commands you can put into the terminal in TWRP recovery ( I can get there will explain further later) to disable Xposed but they say to create a folder name \data\data\....ect ect... There is no way that the TWRP recovery will let me create folders so I'm at a loss there..,..,..,Cc hey were you able to fix it ? i think i just went through that tooo and i downloaded all the corrresponding XPOSED UNINSTALLERS on a different phone with an sd card inserted..,.., then i transfered that SD card to the phone i was atttempting to fix and i flashed 1 by one each xposed uninstaller that i knew was kind of the correct 1. on the 3rd try it worked its just a mattter of flashing the corrrect one I hope that helped i had no clue what to do and I got lucky that way I hope you'll tooo..., let me know...,..,...,..,..,Cc
Click to expand...
Click to collapse
Can't help, but don't use SuperSU for Xposed.
Magisk has a module for Xposed that'll save you lots of pain