Dear friends
Have just bought a Note 4 (SM910F) and spend a few hours yesterday and failed to install ANY custom ROM on my device.
Status: Currently on Lollipop 5.0.1, not Root
1. Installed TWRP (and tried CWM)
2. Downloaded custom ROM to sdcard
3. Booted into recovery mode.
4. Wipe cache/dalvik
4. Install from zip
5. Result = Boot loop
Recovered the phone by using ODIN and stock firmware (which reverts to stock recovery). I tried about 4 different ROMS (Cm12, x-note, sweet, etc) and all had the same result. Only thing i can think of is ...do I need to root BEFORE I try installing a custom ROM? i dont remember doing this with my Note 3.
Ive been using the Note series for years and have never had this issue installing a custom ROM. Can anyone help? I cant use the Note 4 in its current state!
I can't see FACTORY RESET in the list ???
ludoke said:
I can't see FACTORY RESET in the list ???
Click to expand...
Click to collapse
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
afaqali said:
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
Click to expand...
Click to collapse
Wrong TWRP ?
Wrong rom ?
Bootloader?
Coold be many things
ludoke said:
Wrong TWRP ?
Wrong rom ?
Bootloader?
Coold be many things
Click to expand...
Click to collapse
Thank you for your response.
1. TWRP - Im sure i have the right one.
1. The ROMS are definitely compatible with the device. I checked.
2. Bootloader? hmm does this get installed by the recovery module or something I had to directly install?
Anyway no harm in starting fresh. Il re-download everything and make sure I have it right.
Thanks
You said currently 5.0.1, did you do an upgrade from Kitkat ? Kitkat and Lollipop has different bootloaders and is the reason for most of troubles with flashing.
Go back to stock en go further on,at first root with Chainfire-Auto root then flash the right TWRP ,i use TWRP 2.8.6.0. Do NOT use 2.8.5.0!!!!!. Iam using Odin 3.09 for flashing.
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
Please ,post screenshot from settings,about device
ludoke said:
You said currently 5.0.1, did you do an upgrade from Kitkat ? Kitkat and Lollipop has different bootloaders and is the reason for most of troubles with flashing.
Go back to stock en go further on,at first root with Chainfire-Auto root then flash the right TWRP ,i use TWRP 2.8.6.0. Do NOT use 2.8.5.0!!!!!. Iam using Odin 3.09 for flashing.
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
Please ,post screenshot from settings,about device
Click to expand...
Click to collapse
When you say go back to stock? do you mean recovery or the firmware? the device came with lollipop installed. Thank you though. Il use the TWRP you recommended.
afaqali said:
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
Click to expand...
Click to collapse
afaqali said:
When you say go back to stock? do you mean recovery or the firmware? the device came with lollipop installed. Thank you though. Il use the TWRP you recommended.
Click to expand...
Click to collapse
By stock ,i mean the firmware.
So if the device came with Lollipop it should have the Lollipop bootloader. An you must search for root and Twrp for Galaxy Note 4 Lollipop root + Twrp Altough on my S4 they work for both.
Did you buy the phone new or second hand? If on second hand ,did you verrify it was working ok?
And IMPORTANT if you buy second hand ,it could be a clone,what dit you pay if in this case?
---------- Post added at 03:22 PM ---------- Previous post was at 03:13 PM ----------
Please download from the Playstore PhoneInfo,it's for samsung devices and search in the harware section for Snapdragon or Exynos, if that not appears you are ****ed ,witch means it's a clone
ludoke said:
By stock ,i mean the firmware.
So if the device came with Lollipop it should have the Lollipop bootloader. An you must search for root and Twrp for Galaxy Note 4 Lollipop root + Twrp Altough on my S4 they work for both.
Did you buy the phone new or second hand? If on second hand ,did you verrify it was working ok?
And IMPORTANT if you buy second hand ,it could be a clone,what dit you pay if in this case?
---------- Post added at 03:22 PM ---------- Previous post was at 03:13 PM ----------
Please download from the Playstore PhoneInfo,it's for samsung devices and search in the harware section for Snapdragon or Exynos, if that not appears you are ****ed ,witch means it's a clone
Click to expand...
Click to collapse
Dont think its a clone but to be sure ive checked and its a qualcom snapdragon, however im not sure if the owner before me bought it with lollipop or kk and upgraded it. How can i check if it has the right bootloader? wouldnt installing a ROM update the bootloader too?
Also i have the stock firmware installed.
So the plan is:
1. Update the recovery to TWRP (version you mentioned)
2. Root with CF-autoroot
2. Wipe the system clean, inc dalvik, cache
3. Install custom ROM
Sound good?
And screenshot attached of phone settings
http://imgur.com/scqnKbA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi!
I got a honor 7 PLK-AL10 64GB version and I just upgraded it to Android 5.1.1 with the site/download of EMUi huawei com in the chinese version.
Has anyone done this also? Why is it not noted here before?
Is this fine with you? As thats the CN version, not a europe version, but it works fine so far.
Has anyone got the Huawei Cloud got to run and download themes?
thank you,
echelon
Most people here have the 16gb European version, not the Chinese version, and I'm not sure if they are inter-compatible.
I have PLK-UL00 16GB,,,Can i install 5.1.1?I am rooted and bootloader unlocked with english twrp recovery
frago21ps said:
I have PLK-UL00 16GB,,,Can i install 5.1.1?I am rooted and bootloader unlocked with english twrp recovery
Click to expand...
Click to collapse
Yes you can, but first you have to do unroot and install stock recovery.
5.1.1 ROM is a Developer Edition, but it works for me as a stable version.
You did not write what is your rom and I do not know if there is a valid order of installation:
B173 (5.0.2) - B708 (5.1.1) - 5.11.1 (5.1.1)
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=171
I have b173, thanks!are they any difference from 5.0.2?
frago21ps said:
I have b173, thanks!are they any difference from 5.0.2?
Click to expand...
Click to collapse
Use google translate:
http://club.huawei.com/thread-6034047-1-17.html
Regards
I'm try update B708 my plk-al10 with local update, but my phone reboot and start twrp, how I can do, any solution?
Using fastboot you can flash the stock recovery and update or flash the rom itself
I have a Honor 7 16gb EU (PLK-L01). Does this works in my phone and how this can be installed? I do not have rooted phone. Can you tell the installation instructions? sry my bad english.
keila said:
I have a Honor 7 16gb EU (PLK-L01). Does this works in my phone and how this can be installed? I do not have rooted phone. Can you tell the installation instructions? sry my bad english.
Click to expand...
Click to collapse
If your device is not root, you download the rom version suitable for your device.
1-Unzip the downloaded file ( Recommended use 7z to extract).
2-Copy the folder dload in to Internal Storage or SD card.
3-Go to Setting app : Setting All> Updater>Menu>Local update.
4-Your device will reboot and update.
5-Enjoy
@ancola66, thanks, but where do we download the ROM from for our version, PLK-L01?
I've been on the Chinese web site with Google translate but can find any reference to the PLK-L01.
Using Chinese 64gb as well, but i haven't yet moved to developer roms because kind of lazy to update the rom every 15 days. Any new features on that ?
rotmistr said:
Using fastboot you can flash the stock recovery and update or flash the rom itself
Click to expand...
Click to collapse
Thank for your answer can you describe more detailed?
Can someone share the Firmware???
I just install it,,,but im trying to install twrp,all the time succesc but when im trying to boot into twrp from adb is making reboot,,,the twrp for 173 doesnt work in 5.1.1?
frago21ps said:
I just install it,,,but im trying to install twrp,all the time succesc but when im trying to boot into twrp from adb is making reboot,,,the twrp for 173 doesnt work in 5.1.1?
Click to expand...
Click to collapse
Chinese TWRP for 5.1.1 (2.8.6.0)
https://mega.nz/#!hdgmBCrA!llYgb8oQAn2OOM9Bqs_ZdYinFn-HgnCwhvsWDXVjZgg
ui.zip (TWRP theme in english - thanks to LePocketPc -
http://forum.xda-developers.com/showpost.php?p=62856109&postcount=5)
in phone put in - folder TWRP - folder theme
@ancola66 Thanks to installation instructions Can you say where do i download the ROM from for our version, PLK-L01?
waliej said:
Chinese TWRP for 5.1.1 (2.8.6.0)
https://mega.nz/#fm/JZ5XmZ7A
ui.zip (TWRP theme in english - thanks to LePocketPc -
http://forum.xda-developers.com/showpost.php?p=62856109&postcount=5)
in phone put in - folder TWRP - folder theme
Click to expand...
Click to collapse
Thanks but link with twrp doesnt work
---------- Post added at 10:07 PM ---------- Previous post was at 09:48 PM ----------
Someone please can share twrp for 5.5.1????
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
Someone please can share twrp for 5.5.1????
frago21ps said:
Thanks but link with twrp doesnt work
---------- Post added at 10:07 PM ---------- Previous post was at 09:48 PM ----------
Someone please can share twrp for 5.5.1????
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
Someone please can share twrp for 5.5.1????
Click to expand...
Click to collapse
edit link
echeloni2p said:
Hi!
I got a honor 7 PLK-AL10 64GB version and I just upgraded it to Android 5.1.1 with the site/download of EMUi huawei com in the chinese version.
Has anyone done this also? Why is it not noted here before?
Is this fine with you? As thats the CN version, not a europe version, but it works fine so far.
Has anyone got the Huawei Cloud got to run and download themes?
thank you,
echelon
Click to expand...
Click to collapse
Hi bro i m also using64gb AL10 gold
I m using themes but not using clod services also i m running the lates update..and it work fine..but really upset with contacts need +91 for whatsapp and for dialing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have to remove+91
Sent from my PLK-AL10 using Tapatalk
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
Can someone tell me with root can i reduce navibar size coz xposed is not working with H7
Sent from my PLK-AL10 using Tapatalk
hello every one
excuse my English
i'm new here .
i need help with my n9005 hlte . my wifi stuck because i flash new modem and bootloder
i use tema cm13 ROM.
what i tried so far :
1\ full wipe
2\ flash stock ROM 5.0
3\ flash stock ROM 4.4.2
4\ all WiFi apps on play store
please help
mamounsea said:
hello every one
excuse my English
i'm new here .
i need help with my n9005 hlte . my wifi stuck because i flash new modem and bootloder
i use tema cm13 ROM.
what i tried so far :
1\ full wipe
2\ flash stock ROM 5.0
3\ flash stock ROM 4.4.2
4\ all WiFi apps on play store
please help
Click to expand...
Click to collapse
All you have to do is flash lollipop stock Rom via Odin. Then cf root and flash recovery. After that flash your cm13 Rom. After flash cm13 Rom then only updated your modem and boatloader. Make sure your lollipop Rom is the latest flashing.
Yumiko87 said:
All you have to do is flash lollipop stock Rom via Odin. Then cf root and flash recovery. After that flash your cm13 Rom. After flash cm13 Rom then only updated your modem and boatloader. Make sure your lollipop Rom is the latest flashing.
Click to expand...
Click to collapse
i followed this steps exactly. but nothing changes. still stuck :crying:
mamounsea said:
i followed this steps exactly. but nothing changes. still stuck :crying:
Click to expand...
Click to collapse
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Yumiko87 said:
Can I know what you mean by stuck?
Click to expand...
Click to collapse
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Yumiko87 said:
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Click to expand...
Click to collapse
i really appreciate your help
by stuck i mean it wouldn't turn on. it's just stuck
right now my bootloader :N9005XXUGBOJ6 - baseband: N9005XXUGBOJ1
ROM: cm13 - temasek - bulid 12.2
i did exact steps you mentioned
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG][/IMG]
Yumiko87 said:
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Click to expand...
Click to collapse
mamounsea said:
i really appreciate your help
by stuck i mean it wouldn't turn on. it's just stuck
right now my bootloader :N9005XXUGBOJ6 - baseband: N9005XXUGBOJ1
ROM: cm13 - temasek - bulid 12.2
i did exact steps you mentioned
Click to expand...
Click to collapse
Can I ask you a question? If you flash the stock Rom lollipop Rom via Odin it's still stuck on the WiFi? Or only stuck in your cm13 rom? Please do comfirm this .
Yes it's stuck on lollipop stock rom, and kitkat stock rom also.
I noticed when i go to wifi>advanced my MAC address shows 02:00:00:00:00:00
mamounsea said:
I noticed when i go to wifi>advanced my MAC address shows 02:00:00:00:00:00
Click to expand...
Click to collapse
What ver of boatloader and modem you are?
Bootloader: N9005XXUGBOJ6
Modem: N9005XXUGBOJ1
mamounsea said:
Bootloader: N9005XXUGBOJ6
Modem: N9005XXUGBOJ1
Click to expand...
Click to collapse
Have you try others boatloader and modem?
yes i do ..... but the result same.
any suggestions ???
mamounsea said:
yes i do ..... but the result same.
any suggestions ???
Click to expand...
Click to collapse
Try unplug your sd card and restart the phone and see.
Yumiko87 said:
Try unplug your sd card and restart the phone and see.
Click to expand...
Click to collapse
okay i well give it a try
You might try to look on this too if still not working:
http://android-active.blogspot.my/2016/06/100-solution-for-samsung-not3-n9005.html?m=1
still not working
From the start it reads as a hardware problem .
mamounsea said:
still not working
Click to expand...
Click to collapse
Can I know which ver of modem and boatloader you are flashing and how you flash it? Before that your WiFi is in good condition?
I quite strange on it as flashing a wrong boatloader or modem will not have bring serious impact to the device unless you are wrong flashing in the process or some error message during flashing.
it's not the first time that i flash a modem and bootloader. until the end of process there is no error messages.
and yes before that my WiFi was work'n perfect.
after my wifi stuck i tried about 7 modems but all didn't fix my issue.
unfortunately i don't know what modem i was use before.
again thanks for your help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here We Go​World Wide Release
*****************************************************************************
Stock N920C Nougat Firmware Links:
All Regions
**: SamMobile Link (Select Your Region and Go)
**: http://live.samsung-updates.com/index.php?device=SM-N920C (Thanks @Or_a) (Select Your Region and Go)
** http://updato.com/firmware-archive-select-model?r=&v=Nougat(Android+7.0)&q=n920c[Fastest] (Select Your Region and Go)
*****************************************************************************
Turkey Exclusive
1: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip (thanks @vysus)
2: http://rapidgator.net/file/363cf2481020b804f3691b02f428b294 (thanks @rohitsinghpu)
3: https://alfafile.net/file/UWKT (thanks @rohitsinghpu)
4: https://simunlockremote.com/galaxy-note-series-firmware/ (thanks @AntonPres)
*****************************************************************************
Note 5 Nougat UI screenshot, Here: http://m.imgur.com/a/IC8K5
*****************************************************************************
Additional:
[Fix] [7.0] Samsung Account Login Password Loop after Rooting on Nougat
S Health App Compromised Error on Nougat:
1) Flash TWRP using odin,
2) Flash supersu using TWRP (Dr Ketan Script)
3) Edit system/build.prop, set ro.config.tima to 0 save and reboot
4) Open SHealth at least once makes sure knox error is gone.
Love it ! But note 5 verizon haven't get it now
lovehtcone said:
Love it ! But note 5 verizon haven't get it now
Click to expand...
Click to collapse
Carriers One have to wait at least one more month
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Can i flash through odin on my N920C indian model?
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
satya_red said:
Can i flash through odin on my N920C indian model?
Click to expand...
Click to collapse
I thinks Get it
Click to expand...
Click to collapse
Can I flash on N920G???
lovehtcone said:
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
I thinks Get it
Click to expand...
Click to collapse
On N920C, Yes
but Indian model is N920G
Click to expand...
Click to collapse
israelnobrega said:
Can I flash on N920G???
Click to expand...
Click to collapse
No
Nougat for Note 5 Turkey N920C
http://rapidgator.net/file/363cf2481020b804f3691b02f428b294
https://alfafile.net/file/UWKT
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Is that official turkey Rom,Isn't it? Can flash via Odin also?
Yep, you can find other mirrors around, is the same files
This is the quicker server at the moment...
What about N920i
N920G, hurry up Samsung!
Deep sleep issue is fixed.
cewrld said:
Deep sleep issue is fixed.
Click to expand...
Click to collapse
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks! Then is no problem if the phone is rooted or not,right? I reset everything from recovery and then flash via odin?
Or is better restore from recovery to MM and then flash? It is my first time and i feel very lost
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Where do You find 4 files Nougat ROM?
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
1)No need to restore MM backup from recovery and then flash
2)You can flash it directly using odin, after successfully flashed factory reset your phone through stock recovery
3)Also you can flash it by complete wipe from twrp recovery
4)Since your running custom rom usb debugging and oem unlocking are already eanbled but be sure once before flashing
Note-Be sure Usb debugging And Oem Unlocking options are enabled from developers option before flashing thorugh odin (Go to setting>about device>software info>Tap build no for 7-8 times until you see developers option is enabled, You can find setting>developers option mostly below about device..From there make sure usb debugging and oem unlocking is enabled)
FLASH ONLY IF YOUR DEVICE IS SUPPORTED BY THIS TURKEY BUILD AND FOLLOW PROPER ODIN FLASHING GUIDE YOU CAN FIND EASILY ANYWHERE IN FORUM
Note: I already tires flashing roms from this forum, none of them worked.
I have a sm g930v (Verizon snapdragon) and I've tried flashing some different roms including superman rom and others, but when I do, I get stuck in a bootloop. So I assume that those roms just don't click with my phone. Could anyone give me the name of a rom that could work? If you need it, some info on my phone can be found at imgur . com/gallery/VK2hH (couldn't attach via xda app, sorry)
Also, is a custom kernel something worth looking into? Because if it could improve my phones performance, that would be neat too.
Looking forward to any help I can get, thanks!?
I use stang5litre Edition 5.0 s7 N v1
DabbingDuke said:
I use stang5litre Edition 5.0 s7 N v1
Click to expand...
Click to collapse
Thanks, but i tried using that one again and yet again got in a bootloop :/
now i gotta reflash to stock and try another.
Any other suggestions for my snapdragon model?
You didn't follow corrections completely with stanglitre. It will work on all snapdragon s7's
Try the Ufirmware hybrid. I'm on that and get 40 hours battery life
Make sure you are turning on debugging blah blah blah
Omegga442 said:
Thanks, but i tried using that one again and yet again got in a bootloop :/
now i gotta reflash to stock and try another.
Any other suggestions for my snapdragon model?
Click to expand...
Click to collapse
Did you get root on stock? Did Flashfire load and get root access? What step were you when you get bootloop?
---------- Post added at 03:03 PM ---------- Previous post was at 02:39 PM ----------
Here's what I did.
I started with stock G930VVRU4BQH4 from updato
I rooted using PERMANENT ROOT method https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 EXCEPT and VERY IMPORTANT in "PERMANENT ROOT" I DONT USE "engineer-rooted boot image" < --Thats for MM, that will bootloop me.
INSTEAD for Nougat, I use "ENG-ROOT" file here --> https://forum.xda-developers.com/verizon-galaxy-s7/how-to/how-rooted-s7-nougatand-fixed-lag-t3576393
I Continue along the GUIDE: ROOT to install SU.
I Install Fashfire from Playstore.
I Go to stang5litre website for current ROM and instructions to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ROM changes the Model to SM-G935V but it is a SM-G930V
DabbingDuke said:
Did you get root on stock? Did Flashfire load and get root access? What step were you when you get bootloop?
---------- Post added at 03:03 PM ---------- Previous post was at 02:39 PM ----------
Here's what I did.
I started with stock G930VVRU4BQH4 from updato
I rooted using PERMANENT ROOT method https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 EXCEPT and VERY IMPORTANT in "PERMANENT ROOT" I DONT USE "engineer-rooted boot image" < --Thats for MM, that will bootloop me.
INSTEAD for Nougat, I use "ENG-ROOT" file here --> https://forum.xda-developers.com/verizon-galaxy-s7/how-to/how-rooted-s7-nougatand-fixed-lag-t3576393
I Continue along the GUIDE: ROOT to install SU.
I Install Fashfire from Playstore.
I Go to stang5litre website for current ROM and instructions to flash.
The ROM changes the Model to SM-G935V but it is a SM-G930V
Click to expand...
Click to collapse
I followed the instructions correctly, I rooted using that nougat eng boot and i used flashfire to wipe what the thread said, and i made sure the order was wipe, then rom flash, and when i hit the lightning bolt the phone restarted and i had a bunch of the white text, (what i assume is files being written to the system) and another reboot, the word flashfire is across the top of my screen for a good 3 mins, then a reboot and my s7 has the logo with the custom lock for custom firmware, and then it vibrates for like .2 seconds then reboots, then repeats to do that until i flash stock back.
I made sure to follow the steps correctly, but maybe I am doing something wrong...
Silkmeister1 said:
You didn't follow corrections completely with stanglitre. It will work on all snapdragon s7's
Try the Ufirmware hybrid. I'm on that and get 40 hours battery life
Make sure you are turning on debugging blah blah blah
Click to expand...
Click to collapse
Could the problem be that I flashed the rom from my internal SD? I downloaded it on my PC, since its like a gig, then uploaded it to google drive to download to my phone faster, and when i went to flash the rom i selected it from my internal storage/download. Should I move it to my external SD card? I think i read somewhere that i should have the firmware on my sd since the flashfire wipe clears the internal memory.
Alright I just flashed the rom again and it said it was installing and blah blah in flashfire and i thought it was going to work this time, but Im back in a bootloop. **** this rom, I'm so irritated. I followed the steps EXACTLY and put the .zip on my ext SD and im still getting bent.
Guess I have to try something else...
Sounds like you doing it right. last thing I can think to check... Did you get the "N" ROM from http://stang5litre-edition-roms.xobor.com/
or
The one posted for MM https://forum.xda-developers.com/ve...t/stang5litre-edition-5-0-s7e-rom-s7-t3453441 see page 177 for "N Rom Is Live" link.
I'm out of ideas if all that checks out.
BTW I flash the ROM from Internal Storage too, I don't think thats the problem.
Not to sound mean, but if your looking for roms you should probably get a different phone. The few roms available to you are crippled by terrible battery life due to the engineer kernel. Stang's rom is good, but nothing can fix the battery. U firmware might be your best bet. Not trolling, just my opinion.
SM-G930V to Indian ROM
folks
i have "SM-G930V" fully official unlocked....can i flash Indian ROM on this, if YES, where and how can i do it?
tq
1. download and flash by odin 3.13.1 the rom ROM Samsung J3 2017 (J327A) (USA AT&T) J327AUCS2ARG2.zip 1.5GB (if you already have this base installed in your phone go to step 2)
2. Download the file OREO pach file and save it to the SD card of your mobile. OTA-J327AUCS2ARG2-to-U2BRI3.zip 1007.2MB pach september
3. Turn off and start the phone in recovery mode.
4. Using the volume keys, select the option: "Apply update from the SD card", select the file and press the power button and wait for it to finish.
* enjoy!
Is this an official OTA update? Either way, I am downloading now to test it. I'll post results when I am done.
Edit: I am getting an error message that reads:
mount: failed to mount /dev/block/platform/13540000.dwmmc0/by-name/SYSTEM at /system: permission denied
After it finishes, I get stuck in a bootloop that just flashes the Samsung logo, vibrates the phone, and repeats. I can recover using the Odin files, so it's not too big a deal, but I'd like to have the Oreo running. Any ideas?
catkraze said:
Is this an official OTA update? Either way, I am downloading now to test it. I'll post results when I am done.
Edit: I am getting an error message that reads:
mount: failed to mount /dev/block/platform/13540000.dwmmc0/by-name/SYSTEM at /system: permission denied
After it finishes, I get stuck in a bootloop that just flashes the Samsung logo, vibrates the phone, and repeats. I can recover using the Odin files, so it's not too big a deal, but I'd like to have the Oreo running. Any ideas?
Click to expand...
Click to collapse
some screenshot? Did you make wipes?
Hi,
Will it work with J330FNXX hungarian Tmobile ?
Thanks.
3pelin said:
some screenshot? Did you make wipes?
Click to expand...
Click to collapse
What do you mean by "make wipes"?
Also, how can I screenshot it if it never boots?
Can this work on Samsung Galaxy J3 SM-327U?
updated the main thread
The updates worked perfectly on my j327a! Its now on Oreo! Thank you!
jfrankki said:
The updates worked perfectly on my j327a! Its now on Oreo! Thank you!
Click to expand...
Click to collapse
Did you have to do any wipes?
Yes, all wipes. Its worth it! Be patient, 1st bootup takes at 5min or more!
---------- Post added at 05:47 PM ---------- Previous post was at 05:43 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:49 PM ---------- Previous post was at 05:47 PM ----------
https://photos.app.goo.gl/h2zGZMx683Wfm9WX8
Wat its the difference between the j327a versus j327p
i have the j327p and i am on mm, any chance to get oreo ?
Hey I get an error about permission denied after trying the first file. I tried wiping but it does not work
bluebox1214 said:
Hey I get an error about permission denied after trying the first file. I tried wiping but it does not work
Click to expand...
Click to collapse
What device do you have?
Scholeggo said:
What device do you have?
Click to expand...
Click to collapse
I have a sm-j327a or j3 2017
bluebox1214 said:
I have a sm-j327a or j3 2017
Click to expand...
Click to collapse
Could the problem be that you didn't unlock the bootloader?
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
HiR3x said:
Wat its the difference between the j327a versus j327p
Click to expand...
Click to collapse
A means AT&T, P means Sprint
Fdraco10 said:
Can this work on Samsung Galaxy J3 SM-327U?
Click to expand...
Click to collapse
HiR3x said:
i have the j327p and i am on mm, any chance to get oreo ?
Click to expand...
Click to collapse
If you're phone's unlocked, it doesn't matter what the carrier is; the important thing is you have the same model: j327. That said, this is the first Oreo ROM the j327 has received. You guys try it (but use TWRP to wipe out the system, data, and Dalvik caches first) and let me know how it goes. I have yet to try; I'm gonna unlock my j327p for Verizon first.
---------- Post added at 11:39 AM ---------- Previous post was at 11:15 AM ----------
catkraze said:
What do you mean by "make wipes"?
Also, how can I screenshot it if it never boots?
Click to expand...
Click to collapse
Use TWRP to wipe the data, system, Dalvik cache, etc.
Scholeggo said:
Could the problem be that you didn't unlock the bootloader?
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
A means AT&T, P means Sprint
If you're phone's unlocked, it doesn't matter what the carrier is; the important thing is you have the same model: j327. That said, this is the first Oreo ROM the j327 has received. You guys try it (but use TWRP to wipe out the system, data, and Dalvik caches first) and let me know how it goes. I have yet to try; I'm gonna unlock my j327p for Verizon first.
---------- Post added at 11:39 AM ---------- Previous post was at 11:15 AM ----------
Use TWRP to wipe the data, system, Dalvik cache, etc.
Click to expand...
Click to collapse
Is there TWRP for this device? Also, I was able to get it working with the other image that was posted. Sorry I didn't reply with that sooner.
catkraze said:
Is there TWRP for this device? Also, I was able to get it working with the other image that was posted. Sorry I didn't reply with that sooner.
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...nt/ecovery-root-twrp-3-1-1-1-samsung-t3709987 for j327u,
https://forum.xda-developers.com/ga...overy-twrp-3-1-0-1-samsung-galaxy-j3-t3573607 for j327p.
What device do you have? Not that it matters what TWRP you choose to install (it should work both ways)
Scholeggo said:
A means AT&T, P means Sprint
Click to expand...
Click to collapse
I know this but i mean this models have the same baseband ?
Scholeggo said:
If you're phone's unlocked, it doesn't matter what the carrier is; the important thing is you have the same model: j327. That said, this is the first Oreo ROM the j327 has received. You guys try it (but use TWRP to wipe out the system, data, and Dalvik caches first) and let me know how it goes. I have yet to try; I'm gonna unlock my j327p for Verizon first.
Click to expand...
Click to collapse
I dont live in the US but i am geting security patches and this is great but i am still on mm i don't belive sprit will launch oreo for this device
And the kernel code its public ? the xiaomi redmi 5A with MSM8917 ,the same board like the j3 emerge got 7.1.2 and will get 8.1 from xiaomi and the suport on xda its superb, and the j3 emerge don't have any custom rom like lineage os,carbon os or aokp ?
HiR3x said:
I know this but i mean this models have the same baseband ?
Click to expand...
Click to collapse
I have no idea. But I had a Grand Prime and used a ROM for a TracFone variant instead of a Sprint variant, and most of the features still work. The j327a and p shouldn't be that different.
HiR3x said:
I dont live in the US but i am geting security patches and this is great but i am still on mm i don't belive sprit will launch oreo for this device
And the kernel code its public ? the xiaomi redmi 5A with MSM8917 ,the same board like the j3 emerge got 7.1.2 and will get 8.1 from xiaomi and the suport on xda its superb, and the j3 emerge don't have any custom rom like lineage os,carbon os or aokp
Click to expand...
Click to collapse
I know; it's been more than a year. And this is saddening.
I'll ask @vince2678 if he'll support the J3. He supports a lot of devices for long periods of time.
Scholeggo said:
I know; it's been more than a year. And this is saddening.
I'll ask @vince2678 if he'll support the J3. He supports a lot of devices for long periods of time.
Click to expand...
Click to collapse
Are the kernel source code public ?