Good day everyone,
D802 here. The only mode I can get to is a DemiGod Crash Handler - both regular root and recovery go to DemiGod after displaying "Secure booting error". Trying to go to regular download mode through PowerOff->VolumeUp->PlugCable shows the below screen and is stuck there (Windows does not recognize any device):
i imgur com/8VXlZqz.jpg
However if I press VolumeUp from DemiGod Crash Handler screen, Windows does recognize it as "LG AndroidNet USB Serial port (COM5)". I'm following tutorial "how-to-restore-lg-g2-to-stock-firmware" from droidviews to flash stock KDZ, but after about a minute the tool stops. Here are the tool log messages:
HTML:
11:12:46 : Restart.....
11:12:46 : Start Date : 2015-07-06 11:12:46
11:12:46 : ---------- QM Testmode ---------
11:12:46 : ***** Check Tool Version *****
11:12:46 : Tool version : 1.6.9.0
11:12:46 : UpgradeDLL version : 2.1.5.0
11:12:46 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:12:46 : LGE USB Driver Version :
11:12:46 : Android PDLV Version :
11:12:46 : Android NDLV Version : 3.14.0.0
11:12:46 : ******************************************
11:12:46 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:12:46 : SetEmerModeAT()
11:12:46 : _IsConnectedPhone Call
11:13:00 : _IsConnectedPhone(1)
11:13:00 : 0 - NotConnected.
11:13:00 : 1 - Normal connect success
11:13:00 : 2 - Emergency connect success
11:13:07 : _IsConnectedPhone Call for SmartPhone
11:13:09 : _IsConnectedPhone(0)
11:13:09 : 0 - NotConnected.
11:13:10 : 1 - Normal connect success
11:13:10 : 2 - Emergency connect success
11:13:10 : *****CheckOS Start********
11:13:10 : Microsoft_Windows7_Professional_Service Pack 1
11:13:10 : *****CheckPCSyncPrograms Start*****
11:13:10 : PCSyncPrograms Not Found - OK and ready to upgrade
11:13:10 : Verifying phone connection...
11:13:10 : dwWaitResetTime(40000 ms)
11:13:11 : _IsConnectedPhone Call
11:13:25 : _IsConnectedPhone(1)
11:13:25 : 0 - NotConnected.
11:13:25 : 1 - Normal connect success
11:13:25 : 2 - Emergency connect success
11:13:25 : Phone Mode(1)
11:13:25 : *****GetPhoneType Start*****
11:13:34 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
11:13:34 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:13:34 : Page_Error ÷־÷׀ְװ´ֿ´
11:13:34 : ¿©±ג´ֲ Retry ÷־÷׀ְװ´ֿ´
11:13:34 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Is there anything that can be done to fix this before before I'll open the phone and short-circuit pins to force it into qhsusb_bulk?
Related
Hi
I followed the tutorial here http://forum.xda-developers.com/showthread.php?t=2432476
but i came up with errors, i re-installed the drivers many times i disabled the modem from device manger also changed the port to 41
but every i get the same error. Can anyone please tell me what is thing that im doing wrong?
13:44:11 : Restart.....
13:44:11 : Start Date : 2014-01-30 13:44:11
13:44:11 : ---------- QM Testmode ---------
13:44:11 : ***** Check Tool Version *****
13:44:11 : Tool version : 1.6.9.0
13:44:11 : UpgradeDLL version : 2.1.5.0
13:44:11 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
13:44:11 : LGE USB Driver Version :
13:44:11 : Android PDLV Version :
13:44:11 : Android NDLV Version :
13:44:11 : ******************************************
13:44:11 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:44:11 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
13:44:11 : SetEmerModeAT()
13:44:11 : _IsConnectedPhone Call
13:44:18 : _IsConnectedPhone(1)
13:44:18 : 0 - NotConnected.
13:44:18 : 1 - Normal connect success
13:44:18 : 2 - Emergency connect success
13:44:23 : _IsConnectedPhone Call for SmartPhone
13:44:26 : _IsConnectedPhone(o)
13:44:26 : 0 - NotConnected.
13:44:26 : 1 - Normal connect success
13:44:26 : 2 - Emergency connect success
13:44:26 : *****CheckOS Start********
13:44:26 : Microsoft_Windows7_Home Edition_Service Pack 1
13:44:26 : *****CheckPCSyncPrograms Start*****
13:44:26 : PCSyncPrograms Not Found - OK and ready to upgrade
13:44:26 : Verifying phone connection...
13:44:26 : dwWaitResetTime(40000 ms)
13:44:27 : _IsConnectedPhone Call
13:44:35 : _IsConnectedPhone(1)
13:44:35 : 0 - NotConnected.
13:44:35 : 1 - Normal connect success
13:44:35 : 2 - Emergency connect success
13:44:35 : Phone Mode(1)
13:44:35 : *****GetPhoneType Start*****
13:44:42 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
13:44:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
13:44:42 : Page_Error ؛خ؛ذہش´د´ظ
13:44:42 : ؟©±â´آ Retry ؛خ؛ذہش´د´ظ
13:44:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
EDIT: i was able to go into download mode. but still getting error
14:22:10 : Restart.....
14:22:10 : Start Date : 2014-01-30 14:22:10
14:22:10 : ---------- QM Testmode ---------
14:22:10 : ***** Check Tool Version *****
14:22:10 : Tool version : 1.6.9.0
14:22:10 : UpgradeDLL version : 2.1.5.0
14:22:10 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
14:22:10 : LGE USB Driver Version :
14:22:10 : Android PDLV Version :
14:22:10 : Android NDLV Version :
14:22:10 : ******************************************
14:22:10 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
14:22:10 : SetEmerModeAT()
14:22:10 : _IsConnectedPhone Call
14:22:17 : _IsConnectedPhone(2)
14:22:17 : 0 - NotConnected.
14:22:17 : 1 - Normal connect success
14:22:17 : 2 - Emergency connect success
14:22:17 : *****CheckOS Start********
14:22:17 : Microsoft_Windows7_Home Edition_Service Pack 1
14:22:17 : *****CheckPCSyncPrograms Start*****
14:22:18 : PCSyncPrograms Not Found - OK and ready to upgrade
14:22:18 : Verifying phone connection...
14:22:18 : dwWaitResetTime(40000 ms)
14:22:19 : Phone Mode(2)
14:22:19 : *****GetPhoneType Start*****
14:22:19 : Phone Type : CDMA_2CHIP
14:22:19 : *****GetPhoneBinaryVersion Start*****
14:22:19 : Phone Bin Version : D80210C_00
14:22:19 : *****Get ESN / IMEI / MEID Start*****
14:22:19 : ESN/IMEI/MEID : 357246055054876
14:22:20 : Check Backup and Restore model
14:22:20 : Skip Backup and Restore - Emergency mode
14:22:20 : Phone type Compare start
14:22:20 : *****CheckPCSyncPrograms Start*****
14:22:20 : PCSyncPrograms Not Found - OK and ready to upgrade
14:22:21 : ****************CheckAndDownload********************
14:22:21 : Version :
14:22:21 : ******Extract Start C:\Users\Admin\Desktop\Turkey D80210C_00.kdz*****
14:22:21 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:22:21 : Check 2G-4G big size kdz file..
14:22:21 : Extract 2G-4G big size kdz file..
14:22:21 : NNNNN WDB FullPath(C:\Users\Admin\Desktop\Turkey D80210C_00.kdz)
14:22:21 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
14:22:21 : Extract End C:\Users\Admin\Desktop\Turkey D80210C_00.kdz
14:22:21 : 01 Skip delete kdz 1.1 file...
14:22:22 : ------------------Model.dll Information-------------------
14:22:22 : Filename : LGUP_8974.dll
14:22:22 : Version : 0.2.10.0
14:22:22 : File size : 1461248
14:22:22 : File date : 2014/01/30-14:22:21
14:22:22 : PC Created date: 2014/01/30-14:22:21
14:22:22 : ----------------------------------------------------------
14:22:22 : *****Check LGCM Programs Start*****
14:22:22 : LGCM Programs Not Found - OK and ready to upgrade
14:22:22 : m_pLGCyonUpdate status change.
14:22:22 : *****WorkModelDLL Start*****
14:22:23 : strPhoneBinaryPath(C:\Users\Admin\Desktop\Turkey D80210C_00.kdz)
14:22:23 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:22:23 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
14:22:23 : _DetachDLL Call
14:22:28 : _DetachDLL Call End
14:22:28 : Call fn_StartUpgrade
14:22:28 : ********* 2Chip Model.dll input Parameter*************
14:22:28 : MODEL_EVENT : 32769
14:22:28 : PhoneBinaryPath : C:\Users\Admin\Desktop\Turkey D80210C_00.kdz
14:22:28 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
14:22:28 : BootWaitTime : 49500
14:22:28 : UsbHighSpeed : FALSE
14:22:28 : PhoneMode : 2
14:22:28 : NewPhoneBinVersion : Turkey D80210C_00
14:22:28 : ClearSI : FALSE
14:22:28 : AuthMark : 0
14:22:28 : ********* 2Chip Model.dll input Parameter End*************
14:22:48 : wParam : 100, lParam = 72
14:22:48 : MODEL DLL Event : (100, 72)
14:22:48 : Step : TYPE_WPARAM_UPGRADE_ERROR
14:22:48 : CleanModelDll() : Free Model.dll
14:22:48 : _DetachDLL Call
14:22:53 : _DetachDLL Call End
14:22:53 : Page_Error ؛خ؛ذہش´د´ظ
14:22:53 : ؟©±â´آ Retry ؛خ؛ذہش´د´ظ
Never mind guys. i solved it with the adb commands now its running!
guys please i need your help.
i was flashing using the go back to stock method but it's not working. i get this log:
00:30:01 : Restart.....
00:30:01 : Start Date : 2014-03-19 00:30:01
00:30:01 : ---------- QM Testmode ---------
00:30:01 : ***** Check Tool Version *****
00:30:01 : Tool version : 1.6.9.0
00:30:01 : UpgradeDLL version : 2.1.5.0
00:30:01 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:30:01 : LGE USB Driver Version :
00:30:01 : Android PDLV Version :
00:30:01 : Android NDLV Version :
00:30:01 : ******************************************
00:30:01 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:30:01 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:30:01 : SetEmerModeAT()
00:30:01 : _IsConnectedPhone Call
00:30:31 : _IsConnectedPhone(1)
00:30:31 : 0 - NotConnected.
00:30:31 : 1 - Normal connect success
00:30:31 : 2 - Emergency connect success
00:30:46 : *****CheckOS Start********
00:30:46 : Microsoft_Windows7_Professional_
00:30:46 : *****CheckPCSyncPrograms Start*****
00:30:47 : PCSyncPrograms Not Found - OK and ready to upgrade
00:30:47 : Verifying phone connection...
00:30:47 : dwWaitResetTime(40000 ms)
00:30:48 : Phone Mode(1)
00:30:48 : *****GetPhoneType Start*****
00:30:53 : Phone Type : QCT
00:30:53 : *****GetPhoneModel Start*****
00:30:53 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_GetPhoneModel() strlen(pPhoneModelBuf) Error)
00:30:53 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:30:53 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:30:53 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
00:30:53 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
can anyone help???
Carefully examine this topic, it will surely be installing.
http://forum.xda-developers.com/showthread.php?t=2432476
http://forum.xda-developers.com/showthread.php?t=2687768
If someone can help me please I have ls980 and can't go back to stock, I keep getting this
Sent from my MB855 using xda app-developers app
Hi
Now I have CM11 and I'd like to back to stock soft (V20B - as always). So I use R&D Test tool, tick options as always, normal upgrade test, choose language and installation starts. However it stops at 2%.
Whats wrong? I read it may be caused by issue with bootloader. Maybe my recovery (PhilZ)? I have no idea.
Any solutions?
Up
any solutions?
robson2222 said:
Up
any solutions?
Click to expand...
Click to collapse
Can you post a logcat. You might need to change your ports to com4. I read somewhere that a hard reset also helps.
Art Vanderlay said:
Can you post a logcat. You might need to change your ports to com4. I read somewhere that a hard reset also helps.
Click to expand...
Click to collapse
if you mean log from lg mobile support tool i have it:
Code:
13:03:55 : Restart.....
13:03:55 : Start Date : 2014-06-22 13:03:55
13:03:56 : ---------- QM Testmode ---------
13:03:56 : ***** Check Tool Version *****
13:03:56 : Tool version : 1.6.9.0
13:03:56 : UpgradeDLL version : 2.1.5.4
13:03:56 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
13:03:56 : LGE USB Driver Version :
13:03:56 : Android PDLV Version :
13:03:56 : Android NDLV Version :
13:03:56 : ******************************************
13:03:56 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:03:56 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
13:03:56 : SetEmerModeAT()
13:03:56 : _IsConnectedPhone Call
13:03:57 : _IsConnectedPhone(0)
13:03:57 : 0 - NotConnected.
13:03:57 : 1 - Normal connect success
13:03:57 : 2 - Emergency connect success
13:03:57 : *****CheckOS Start********
13:03:57 : Microsoft_Windows7_Professional_Service Pack 1
13:03:57 : *****CheckPCSyncPrograms Start*****
13:03:57 : PCSyncPrograms Not Found - OK and ready to upgrade
13:03:57 : Verifying phone connection...
13:03:57 : dwWaitResetTime(40000 ms)
13:03:58 : _IsConnectedPhone Call for 3GQCT
13:04:00 : Phone Mode(0)
13:04:00 : 0 - NotConnected.
13:04:00 : 1 - Normal connect success
13:04:00 : 2 - Emergency connect success
13:04:00 : _IsConnectedPhone Call
13:04:10 : _IsConnectedPhone(2)
13:04:10 : 0 - NotConnected.
13:04:10 : 1 - Normal connect success
13:04:10 : 2 - Emergency connect success
13:04:10 : Phone Mode(2)
13:04:10 : *****GetPhoneType Start*****
13:04:10 : Phone Type : CDMA_2CHIP
13:04:10 : *****GetPhoneBinaryVersion Start*****
13:04:10 : Phone Bin Version : UNKNOWN_00
13:04:10 : *****Get ESN / IMEI / MEID Start*****
13:04:10 : ESN/IMEI/MEID : 357246056667437
13:04:12 : Check Backup and Restore model
13:04:12 : Skip Backup and Restore - Emergency mode
13:04:12 : Phone type Compare start
13:04:12 : *****CheckPCSyncPrograms Start*****
13:04:12 : PCSyncPrograms Not Found - OK and ready to upgrade
13:04:13 : ****************CheckAndDownload********************
13:04:13 : Version :
13:04:13 : ******Extract Start D:\Telefon\G2\ROM\D80220B_00.kdz*****
13:04:13 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
13:04:13 : Check 2G-4G big size kdz file..
13:04:13 : Extract 2G-4G big size kdz file..
13:04:13 : NNNNN WDB FullPath(D:\Telefon\G2\ROM\D80220B_00.kdz)
13:04:13 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
13:04:13 : Extract End D:\Telefon\G2\ROM\D80220B_00.kdz
13:04:13 : 01 Skip delete kdz 1.1 file...
13:04:13 : ------------------Model.dll Information-------------------
13:04:13 : Filename : LGUP_8974.dll
13:04:13 : Version : 0.3.10.0
13:04:13 : File size : 1498624
13:04:13 : File date : 2014/06/22-13:04:13
13:04:13 : PC Created date: 2014/06/22-13:04:13
13:04:13 : ----------------------------------------------------------
13:04:14 : *****Check LGCM Programs Start*****
13:04:14 : LGCM Programs Not Found - OK and ready to upgrade
13:04:14 : m_pLGCyonUpdate status change.
13:04:14 : *****WorkModelDLL Start*****
13:04:15 : strPhoneBinaryPath(D:\Telefon\G2\ROM\D80220B_00.kdz)
13:04:15 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
13:04:15 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
13:04:16 : _DetachDLL Call
13:04:21 : _DetachDLL Call End
13:04:21 : Call fn_StartUpgrade
13:04:21 : ********* 2Chip Model.dll input Parameter*************
13:04:21 : MODEL_EVENT : 32769
13:04:21 : PhoneBinaryPath : D:\Telefon\G2\ROM\D80220B_00.kdz
13:04:21 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
13:04:21 : BootWaitTime : 49500
13:04:21 : UsbHighSpeed : FALSE
13:04:21 : PhoneMode : 2
13:04:21 : NewPhoneBinVersion : D80220B_00
13:04:21 : ClearSI : FALSE
13:04:21 : AuthMark : 0
13:04:21 : ********* 2Chip Model.dll input Parameter End*************
13:04:24 : wParam : 20, lParam = 540
13:04:24 : MODEL DLL Event : (20, 540)
13:04:25 : Model File Count = 540
13:04:25 : wParam : 100, lParam = 51
13:04:25 : MODEL DLL Event : (100, 51)
13:04:25 : Step : TYPE_WPARAM_UPGRADE_ERROR
13:04:25 : CleanModelDll() : Free Model.dll
13:04:25 : _DetachDLL Call
13:04:30 : _DetachDLL Call End
13:04:30 : Page_Error şÎşĐŔÔ´Ď´Ů
13:04:30 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
Of course I use offline method to flash ROM. Hard reset can't repair this.
Q&A for [FIX]LG Flash Tool Stuck At 2%
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [FIX]LG Flash Tool Stuck At 2%. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
worked like charm thank you for your support
Help Please
First of all, sorry for my english. I have the same 2% error, but the problem here is that I can't get into recovery mode, I only can get into download load, the phone doesn't turn on either.
That means that the only thing that I can do it's to flash a kdz file but the 2% error appears all the time. So, can you please help me? It's a 32gb D802.
Thank you very much.
it worked......thanks a lot...
wow....u r a genius , buddy...
i've been trying all sorts of tricks to flash it before....(i have done a vast number of flashing on different devices and on g2 , but never encountered the 2 % error...)
thanks to you, i've reverted back to the stock rom...
tons of thanks....hats off , .....
My log is like that:
00:44:22 : Start Date : 2015-04-10 00:44:22
00:44:22 : ---------- CSE mode ---------
00:44:22 : ***** Check Tool Version *****
00:44:22 : Tool version :
00:44:22 : UpgradeDLL version :
00:44:22 : Current Dir : C:\Users\jaco\Desktop\LG Flash Tool 2014
00:44:22 : LGE USB Driver Version :
00:44:22 : Android PDLV Version :
00:44:22 : Android NDLV Version :
00:44:22 : ******************************************
00:44:22 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:44:22 : *****CheckOS Start********
00:44:22 : Microsoft_Windows7_Professional_
00:44:22 : *****CheckPCSyncPrograms Start*****
00:44:22 : PCSyncPrograms Not Found - OK and ready to upgrade
00:44:22 : SetEmerModeAT()
00:44:23 : Verifying phone connection...
00:44:23 : dwWaitResetTime(40000 ms)
00:44:24 : _IsConnectedPhone Call
00:44:46 : _IsConnectedPhone(2)
00:44:46 : 0 - NotConnected.
00:44:46 : 1 - Normal connect success
00:44:46 : 2 - Emergency connect success
00:44:46 : Phone Mode(2)
00:44:46 : *****GetPhoneType Start*****
00:44:46 : Phone Type : CDMA
00:44:46 : *****Get ESN / IMEI / MEID Start*****
00:44:47 : Skip Backup and Restore - CSE mode.
00:44:47 : Skip Sequential upgrade info check - CSE mode.
00:44:47 : *****CheckPCSyncPrograms Start*****
00:44:48 : PCSyncPrograms Not Found - OK and ready to upgrade
00:44:49 : ****************CheckAndDownload********************
00:44:49 : Version : D80220H_00
00:44:49 : !!*****OpenURL Start*****!!
00:44:49 : ******Extract Start C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz*****
00:44:49 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:44:49 : Check 2G-4G big size kdz file..
00:44:49 : Extract 2G-4G big size kdz file..
00:44:49 : NNNNN WDB FullPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:44:49 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:44:49 : Extract End C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:44:49 : 01 Skip delete kdz 1.1 file...
00:44:49 : ------------------Model.dll Information-------------------
00:44:49 : Filename : LGUP_8974.dll
00:44:49 : Version : 0.3.13.1
00:44:49 : File size : 1526272
00:44:49 : File date : 2015/04/10-00:44:49
00:44:49 : PC Created date: 2015/04/10-00:44:49
00:44:49 : ----------------------------------------------------------
00:44:49 : *****Check LGCM Programs Start*****
00:44:49 : LGCM Programs Not Found - OK and ready to upgrade
00:44:49 : m_pLGCyonUpdate status change.
00:44:50 : *****WorkModelDLL Start*****
00:44:50 : strPhoneBinaryPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:44:50 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
00:44:50 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:44:51 : _DetachDLL Call
00:44:56 : _DetachDLL Call End
00:44:56 : Call fn_StartUpgrade
00:44:56 : Phone mode change -> CSE
00:44:56 : ********* CDMA Model.dll input Parameter *************
00:44:56 : MODEL_EVENT : 32769
00:44:56 : PhoneBinaryPath : C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:44:56 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
00:44:56 : BootWaitTime : 49500
00:44:56 : UsbHighSpeed : FALSE
00:44:56 : PhoneMode : 4
00:44:56 : NewPhoneBinVersion : D80220H_00
00:44:56 : ClearSI : FALSE
00:44:56 : AuthMark : 0
00:44:56 : ********* CDMA Model.dll input Parameter End*************
00:44:58 : Page_Error şÎşĐŔÔ´Ď´Ů
00:44:59 : wParam : 20, lParam = 540
00:44:59 : MODEL DLL Event : (20, 540)
00:45:00 : wParam : 100, lParam = 51
00:45:00 : MODEL DLL Event : (100, 51)
00:45:00 : CleanModelDll() : Free Model.dll
00:45:00 : _DetachDLL Call
00:45:05 : _DetachDLL Call End
00:45:07 : Page_Error şÎşĐŔÔ´Ď´Ů
00:45:07 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
00:45:10 : Call Retry Thread
00:45:10 : Verifying phone connection...
00:45:10 : Verifying phone connection...
00:45:10 : dwWaitResetTime(40000 ms)
00:45:14 : _IsConnectedPhone Call
00:45:33 : _IsConnectedPhone(2)
00:45:33 : 0 - NotConnected.
00:45:33 : 1 - Normal connect success
00:45:33 : 2 - Emergency connect success
00:45:33 : Phone Mode(2)
00:45:33 : *****WorkModelDLL Start*****
00:45:35 : _DetachDLL Call
00:45:40 : _DetachDLL Call End
00:45:40 : strPhoneBinaryPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:45:40 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
00:45:40 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:45:40 : _DetachDLL Call
00:45:45 : _DetachDLL Call End
00:45:45 : Call fn_StartUpgrade
00:45:45 : Phone mode change -> CSE
00:45:45 : ********* CDMA Model.dll input Parameter *************
00:45:45 : MODEL_EVENT : 32769
00:45:45 : PhoneBinaryPath : C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:45:45 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
00:45:45 : BootWaitTime : 74250
00:45:45 : UsbHighSpeed : FALSE
00:45:45 : PhoneMode : 4
00:45:45 : NewPhoneBinVersion : D80220H_00
00:45:45 : ClearSI : FALSE
00:45:45 : AuthMark : 0
00:45:45 : ********* CDMA Model.dll input Parameter End*************
00:45:48 : wParam : 20, lParam = 540
00:45:48 : MODEL DLL Event : (20, 540)
00:45:49 : wParam : 100, lParam = 51
00:45:49 : MODEL DLL Event : (100, 51)
00:45:49 : CleanModelDll() : Free Model.dll
00:45:49 : _DetachDLL Call
00:45:54 : _DetachDLL Call End
00:45:57 : Page_Error şÎşĐŔÔ´Ď´Ů
00:45:57 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
00:47:31 : Call Retry Thread
00:47:31 : Verifying phone connection...
00:47:31 : Verifying phone connection...
00:47:31 : dwWaitResetTime(40000 ms)
00:47:35 : _IsConnectedPhone Call
00:47:35 : _IsConnectedPhone(0)
00:47:35 : 0 - NotConnected.
00:47:35 : 1 - Normal connect success
00:47:35 : 2 - Emergency connect success
00:47:39 : _IsConnectedPhone Call
00:47:39 : _IsConnectedPhone(0)
00:47:39 : 0 - NotConnected.
00:47:39 : 1 - Normal connect success
00:47:39 : 2 - Emergency connect success
00:47:43 : _IsConnectedPhone Call
00:47:43 : _IsConnectedPhone(0)
00:47:43 : 0 - NotConnected.
00:47:43 : 1 - Normal connect success
00:47:43 : 2 - Emergency connect success
00:47:43 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
00:47:45 : Check Cancel button active..
00:47:45 : CLGMobileHttp Class ĽŇ¸ę˝ĂŔŰ.
00:47:45 : CLGMobileHttp Class ĽŇ¸ę...
Click to expand...
Click to collapse
CAN i use this metod?
used the fix ,but stil not able to flash
Hi, I had used the tool previously to flash successfully.,
But now I'm on official 4.4.2. With philz latest recovery ..
The problem I'm encountering is that wen I try connecting the mob in recovery mode, to PC , I cant start adb services .
The mob is getting detected in the PC,,but wen I start the fix bat service , my device is not getting detected and just stuck at the message daemon started successfuly ...nothing else.
Please help me out. My mob is D802 international version with Indian official 4.4.2 installed.
I've already downloaded the lollipop version of hungarry 16gb and Open version 16 GB of another country.
Kindly advice me which one to install and how. To overcome this error...
The device is not getting detected......
Thanks in advance
I had this LG Flash tool 2% problem.
I did install FixedDownloadCMode.bat and it was succesfull.
I was in TWRP and then shutdown the device and booted to download mode. Download mode boot stuck to point where there was those blue dots. This was last time i could even try download mode.
After that when I try to shutdown device, it auto reboots directly to lg logo. Cant shutdown device.
Because of FixedDownloadCMode.bat there is no more twrp and because bootloop can't get and try download mode (if it even works).
What should i do now?
Help!
This D805
This tool work for the D805 Model
Is this risky? Could it cause a problem that would require more technical skill to solve? Because i havent done much more than root and flash zip files from recovery so id hate to brick a device thats currently working.
Teo222 said:
Is this risky? Could it cause a problem that would require more technical skill to solve? Because i havent done much more than root and flash zip files from recovery so id hate to brick a device thats currently working.
Click to expand...
Click to collapse
Look my post above. I would say, this is risky.
I was coming from working Acura ROM, but after this fix, I had to disassembly and hardware reset device to qhsusb mode.
i have this problem with G Flex2. how work?
What if I have only the first row of the error
-MODEL DLL Event : (100,51)
Should I flash anyway??
Did anybody try to follow the TOT method if the KDZ one wasn't working?
I had the 2% freeze problem too,but the TOT method worked for me.
Erro on Play Store
hi friend, after doing so I can install the firmware by KDZ however I cannot install applications from play store, already updated the app from the play store and play services but still no result
pardon my English
Thanks !!
Nice, it's working. This is very great job ! Very thanks !
Develop Something for D801 & Other Models
I have a D801 and I tried this method on my Phone, and Finally got a Black Screen of Death. After a Broad Torturing Situation and Sleepless Night I got my D801 back. Kindly Provide a Solution for the Similar Problem for this Variant and other Variants as well, So that other gets Benefit as well.
9/10 its your usb cable
solved for me ...
i had the same problem... with G2 d803 ...... when i bought it.....the back cover was replaced with D802 and a did a mistake by flashing via twrp recovery a firmware of D802.... guess what............ i lost even the download mode witch i reinstall it with fast boot.
so make sure that the firmware is the right one for your devices .... use imei written in back side of the back cover to find firmware otherwise flashtool will hung at 2 or 4 %.
Hi,
i am stuck at LG logo, have instaled this BUMPed TWRP, but i cant get into it.
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It´s because I can´t manage to do the vol dwn + power button combo properly. I´ve been trying this for 2 hours already and I had hard time doing it even before, when my phone worked.. (more than 50 attempts... )
So at first i had TWRP 2.8.6.1 and Resurrectionremix ROM with LP, then i wanted to flash SRK ROM and after instalation of it my recovery didn´t work so i had to flash the bumped one.
SRK ROM - http://forum.xda-developers.com/lg-g2/development/rom-srkrom-2-1-16-3-2015-t3055927
Everything worked fine, but the SRK ROM was lagging.
But now i decided to come back to Resurrection remix (because of those lags) and flashed the newest version 5.4.4. after that i got stuck at LG logo. If I connect my prone to computer at the splash screen, it recognises LG G2, but I can´t do anything.
Is there any way i can enter TWRP without doing that buttons combo? Or can i install stock KDZ file with LGflashtool via download mode without bricking my device, when i have bumped twrp?
Thank for any help.
I'm not an experienced user, you should wait for confirmation by other user(s).
Afaik Resurrection Remix needs Jellybean bootloader, therefore you had to flash the "back to KK" patch from SRK thread.
Normally it is possible to enter recovery also with ADB (sending commands from computer to phone), but I don't know if its possible in your case.
Personally, I have flashed .kdz files via LGflashtool 2014 using CSE flash many times without any problem (D802 with bumped TWRP by blastagator).
That´s the problem i want to use adb, but i can not get into TWRP.
Anyway I just tried to use LG flash tool, downloaded drivers + KDZ file and used CSE flash. Verification of phone was completed and upgrading started but then i get popup with no connection to server. Just to clarify my internet connection works fine.
Btw. there is 4% completed behind the popup.
Edit: A lot of people on xda wrote, that this LG flash tool has some difficulties with extracting KDZ files larger than 1Gb, that might be it. But it worked for you...
I found a post in a german android forum about the "connection so server failed". A user stated that he used a usb port located directly on the mainboard (not front) and just ignored the connection error notification. So just don't close the popup window. Also use the original cable of the G2.
Afair there is also a progress bar on the phone, keep an eye on it.
Hmm i've never read about problems with .kdz >1GB. Unfortunately every G2 .kdz is 1,5GB+.
OK, right now I feel like I am totaly dumb and missing something really obvious.
Everytime is my phone at 0% but LG flash tool displays 4% and this TYPE_WPARAM_UPGRADE_ERROR pops up, always same error even with different settings.
Code:
22:55:14 : Start Date : 2015-05-19 22:55:14
22:55:14 : ---------- QM CSE Testmode ---------
22:55:14 : ---------- CSE mode ---------
22:55:14 : ***** Check Tool Version *****
22:55:14 : Tool version : 1.6.9.0
22:55:14 : UpgradeDLL version : 2.1.5.0
22:55:14 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:55:14 : LGE USB Driver Version :
22:55:14 : Android PDLV Version :
22:55:14 : Android NDLV Version : 3.12.0.0
22:55:14 : ******************************************
22:55:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:55:14 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
22:55:14 : SetEmerModeAT()
22:55:14 : *****CheckOS Start********
22:55:14 : Microsoft_Windows7_Professional_Service Pack 1
22:55:14 : *****CheckPCSyncPrograms Start*****
22:55:15 : PCSyncPrograms Not Found - OK and ready to upgrade
22:55:15 : Verifying phone connection...
22:55:15 : dwWaitResetTime(40000 ms)
22:55:16 : _IsConnectedPhone Call
22:55:23 : _IsConnectedPhone(2)
22:55:23 : 0 - NotConnected.
22:55:23 : 1 - Normal connect success
22:55:23 : 2 - Emergency connect success
22:55:23 : Phone Mode(2)
22:55:27 : Skip Backup and Restore - CSE mode.
22:55:27 : *****CheckPCSyncPrograms Start*****
22:55:28 : PCSyncPrograms Not Found - OK and ready to upgrade
22:55:29 : ****************CheckAndDownload********************
22:55:29 : Version :
22:55:29 : ******Extract Start C:\Users\Dell\Downloads\D80220B_00.kdz*****
22:55:29 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:55:29 : Check 2G-4G big size kdz file..
22:55:29 : Extract 2G-4G big size kdz file..
22:55:29 : NNNNN WDB FullPath(C:\Users\Dell\Downloads\D80220B_00.kdz)
22:55:29 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:55:29 : Extract End C:\Users\Dell\Downloads\D80220B_00.kdz
22:55:29 : 01 Skip delete kdz 1.1 file...
22:55:29 : ------------------Model.dll Information-------------------
22:55:29 : Filename : LGUP_8974.dll
22:55:29 : Version : 0.3.10.0
22:55:29 : File size : 1498624
22:55:29 : File date : 2015/05/19-22:55:29
22:55:29 : PC Created date: 2015/05/19-22:55:29
22:55:29 : ----------------------------------------------------------
22:55:29 : *****Check LGCM Programs Start*****
22:55:29 : LGCM Programs Not Found - OK and ready to upgrade
22:55:29 : m_pLGCyonUpdate status change.
22:55:29 : *****WorkModelDLL Start*****
22:55:29 : strPhoneBinaryPath(C:\Users\Dell\Downloads\D80220B_00.kdz)
22:55:29 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:55:29 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:55:29 : _DetachDLL Call
22:55:34 : _DetachDLL Call End
22:55:34 : Call fn_StartUpgrade
22:55:34 : Phone mode change -> CSE
22:55:34 : ********* CDMA Model.dll input Parameter *************
22:55:34 : MODEL_EVENT : 32769
22:55:34 : PhoneBinaryPath : C:\Users\Dell\Downloads\D80220B_00.kdz
22:55:34 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:55:34 : BootWaitTime : 49500
22:55:34 : UsbHighSpeed : FALSE
22:55:34 : PhoneMode : 4
22:55:34 : NewPhoneBinVersion : D80220B_00
22:55:34 : ClearSI : FALSE
22:55:34 : AuthMark : 0
22:55:34 : ********* CDMA Model.dll input Parameter End*************
22:55:55 : wParam : 100, lParam = 72
22:55:55 : MODEL DLL Event : (100, 72)
22:55:55 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:55:55 : CleanModelDll() : Free Model.dll
22:55:55 : _DetachDLL Call
22:56:00 : _DetachDLL Call End
22:56:00 : Page_Error şÎşĐŔÔ´Ď´Ů
22:56:00 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
It doesn´t matter if I use LGFlashTool2014 or UpTestEX tool with windows enabler. Unfortunately i don´t have original LG cable anymore, but i tried to use 3 another different cables and 2 computers (laptop and desktop computer with usb port located on the mainboard - both running win7).
Any further ideas?
I would download the .kdz again (might be corrupt) oder try another .kdz.
In another forum, it is suggested to rename the file to simple name like "a.kdz" and put it on top of the partition (C:\a.kdz).
You also should try newer driver, because afaik the ones in in the kdz how to thread are a little bit old.
Also you could try the TOT method.
Solved
Finally my phone is working again :highfive: :victory:
I read about TOT flash few days ago but didn´t want to use it, because I wasn´t sure if I have right TOT file for my phone, but it was my last chance and it worked on 1st try.
I used 4 or 5 types of KDZ files before (a/b and jellybean/kitkat), so that was not the issue, and had lastest drivers. After a little bit of research on xda and google I found out, that it´s kind of bug in LG software when it comes to overwriting bootloader files and I can´t do anything about it, so the only way solve my trouble was to flash TOT file.