Rogers magic in continuous reboot
I have a ROGERS MAGIC that is in continuous reboot. I Have to take the battery out to get it to power off. I have done a hard reboot but still have the same result. I got tired of waiting for an update from 1.5 from rogers and was using the new cyangon Rom using ROM Manager.I can get the fastboot screen up but I don't have a clue what to try next. Any help would be greatly appreciated.
This is the procedure I used to root my Rogers' Magic and worked just fine...I guess if you do this from the beginning that will work for you too
I have not created this list or did the research for it, another great man has done it! Kudos!
MANUAL PROCEDURE FOR ROGERS MAGIC
Status of script will be written at bottom of file
.
You must have ADB working to connect to your magic before this procedure will work.
On XP machines, you can install HTC sync on your PC, put the phone into USB-debugging
and connect it to the PC. The correct drivers should install automaticly, if not, Google will
be your friend.
.
1. Make sure that the listed files are present in the folder with the Rootme.bat file
.
a) update-cm-5.0.8-DS-signed.zip
b) bc-5.0.8-ebi1-signed.zip
c) gapps-ds-ERE36B-signed.zip
d) exploid
e) Radio_HTC_PVT_32A_3.22.26.17.img
f) hboot-1.33.2010.img
g) recovery-RA-sapphire-v1.7.0H.img
h) update-hboot-1.76.2007-signed.zip
i) recovery-RA-hero-v1.6.2.img
.
2. Connect your magic to your PC and enable USB debugging on your phone.
.
3. Open up a command window and navigate to the directory containg the data
files that need to be sent to your phone.
.
4. Using the syntax "ADB PUSH {file name} {location}" push the following files to
phone. Pay attention to the "/" and make sure you don't miss or add any
a) update-cm-5.0.8-DS-signed.zip to folder /sdcard/
b) bc-5.0.8-ebi1-signed.zip to folder /sdcard/
c) gapps-ds-ERE36B-signed.zip to folder /sdcard/
d) exploid to folder /sqlite_stmt_journals
e) recovery-RA-hero-v1.6.2.img to folder /data/local
f) update-hboot-1.76.2007-signed.zip to folder /sdcard/
.
Eg: adb push update-cm-5.0.8-DS-signed.zip /sdcard/
.
5. Run the following commands in the command window
a) adb shell chmod 777 /sqlite_stmt_journals/exploid
b) adb shell /sqlite_stmt_journals/exploid
.
6. Turn bluetooth on and then off on your magic
.
7. Unplug and then replug the usb cable from your magic
.
8. Enter the following commands into the command window
a)adb shell (you will get a $ prompt)
b)rootshell (you will be prompted for a password)
c)secretlol (you will get a # prompt)
d)chmod 666 /dev/mtd/mtd1
e)exit (you will be back to $ prompt)
f)flash_image recovery /data/local/recovery-RA-hero-v1.6.2.img
g)exit
.
9. Turn off your phone.
.
10. Boot into recovery by holding the Home + Power keys.
.
11. Using the trackball, select "Flash ZIP from SD Card"
.
12. Select update-hboot-1.76.2007-signed.zip
.
13. Press the HOME key to confirm selection.
14. Reboot phone as requested. It will boot back into recovery.
14. Enter the fillowing into the command windown
a)adb shell reboot bootlaoder
.
15A. When phone has booted into fastboot enter the following into the command window.
a)fastboot flash radio Radio_HTC_PVT_32A_3.22.26.17.img
b)fastboot flash hboot hboot-1.33.2010.img
c)fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
d)fastboot reboot-bootloader
.
16. When phone has booted into fastboot enter the following inot the command window.
a)fastboot erase system -w
b)fastboot erase boot
c)fastboot oem powerdown
.
17. After phone powers off, reboot into recovery by holding Home + Power keys.
.
18. Using the trackball, select "Flash ZIP from SD Card" and flash the following files.
Select the home key to confirm each file
a)update-cm-5.0.8-DS-signed.zip
b)bc-5.0.8-ebi1-signed.zip
c)gapps-ds-ERE36B-signed.zip
.
19. After the last file has finished flashing reboot the phone normally.
It can take anywhere from 5-15 min for the first boot.
[GUIDE] UNLOCK - ROOT - RETURN TO STOCK and/ or UNBRICK your Nexus 7 3G “Nakasig- Tilapia” v4.2.2
- Disclaimer: I don't take any responsibility for anything you do to your tablet, which is to transform it into brick, break, or transform it into coffee machine -
Requirements:
1. You must have the sdk (ADT Bundle for Win) installed on your Pc and you are able to access, and use adb and fastboot.
NOTE: Notice the install location. This defaults to C:\Users\<user name>\AppData\Local\Android\android-sdk the platform tools (adb, fastboot) and usb drivers will be downloaded to this location. This will be referred to from here on as your sdk directory
But in case you haven't install all SDK, you can use only fastboot by the easy way.(Go here if you want to use the easy way to fastboot)
2. You must have ticked USB Debugging mode in your Nexus 7 3G
3 You must download and install - USB DRIVERS r_06 for Windows 7 & 8
4. Download one of both root-tool
CF- Auto-Root by Chainfire - Download link for Version Tilapia - Nakasig
or the Superboot r4 by Paul O’Brien - Actually I'm not sure if Superboot is functionnal for version 4.2.2 - I tested with my Grouper v4.2.2 and I stayed in Google screen with bootloop.
5. Download your recovery special for your Tilapia - Nakasig
CWM (Touch version or not)
TWRP - latest versions
ClockworkMod - Google Nexus 7 (GSM) - Superuser (fixed) for Android 4.2.
and rename your select with the name of the recovery image you chose to download.
6. The factory image for the Nexus 7 3G => 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
Click to expand...
Click to collapse
AND DON'T FORGET THAN IT'S BETTER FOR YOUR SPECIAL N7 3G+
TO USE THE SPECIAL RECOVERIES "TILAPIA - NAKASIG"
and NOT "GROUPER" WHICH ARE DIFFERENTS
Click to expand...
Click to collapse
**********************************************************************************************************************************************************************
Pre-Steps
To make this easier,
1 - you should put the root-tool.zip selected on the folder “fastboot” (if you use the easy way - Goto post #2)
2 – You should put the recovery.img selected on the folder “fastboot”
UNLOCK YOUR NEXUS 7 3G+
Click to expand...
Click to collapse
To unlock your device, you must go to your bootloader. To do that, you have possibilities;
1. Turn your device on while pressing volume down
or
1. Connect your device and go to cmd terminal
Code:
> cd \Users\<user name>\AppData\Local\Android\android-sdk\platform-tools (it's common localization for an auto install)
> adb devices
# the following output should be returned
List of devices attached
<device serial number> device
2. Boot to the bootloader by use adb
Code:
adb reboot bootloader
or
2 Bis. Boot to the bootloader by use fastboot
Code:
fastboot reboot-bootloader
3. Unlock your device* by
Code:
fastboot oem unlock
*You will have to accept and erase all of your data on the tablet.
You are unlocked :good:
By Fastboot only easy way - Unlock you device
Code:
C:\Users\Username>cd c:\fastboot
Code:
c:\fastboot>fastboot oem unlock
**********************************************************************************************************************************************************************
FLASH THE RECOVERY
Click to expand...
Click to collapse
You can choose one of both recoveries - CWM or TWRP
Flash ClockworkMod Recovery as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash CWM especially for your N7 3G
Code:
fastboot flash recovery recovery-name of your recovery.img
To make CWM Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
If you having trouble gaining shell, try
Code:
adb kill-server
then
Code:
adb start-server
. And restart the lines command above
* For some people, it has been reported that you don't have to replace recovery-from-boot.bak. The flash is enough to make the recovery stick.
**********************************************************************************************************************************************************************
Flash TWRP as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash TWRP especially for your N7 3G
Code:
fastboot flash recovery recovery-twrp-tilapia-2.4.4.0.img
To make TWRP Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
**********************************************************************************************************************************************************************
FOR THE ROOT
Click to expand...
Click to collapse
- [2013.02.20][N7 WiFi | N7 3G] CF-Auto-Root
Click to expand...
Click to collapse
What's installed
- SuperSU binary and APK
- Nothing else, that's it.
Installation and usage
- Download the ZIP file (see post below for link)
- Extract the ZIP file (you will see - 2 folders=> images & tools and 3 files: root-windows // root-mac // root-linux)
- Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
- Connect your device to your computer using USB
- Windows:
Code:
Run root-windows.bat
- Linux
Code:
chmod +x root-linux.sh
Code:
Run root-linux.sh
- Mac OS X
Code:
chmod +x root-mac.sh
Code:
Run root-mac.sh
- [ROOT] Superboot - Nexus 7 WiFi / 3G root solution
Click to expand...
Click to collapse
How to use Superboot - Windows, Linux and OSX
- Download the Superboot zip file above and extract to a directory
- Put your device in bootloader mode - Turn off the phone then turn on with the 'volume up' and 'volume down' buttons both pressed to enter the bootloader (as pictured below)
- WINDOWS - double click 'superboot-windows.bat'
- MAC - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-mac.sh
followed by
Code:
./superboot-mac.sh
- LINUX - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-linux.sh
followed by
Code:
./superboot-linux.sh
**********************************************************************************************************************************************************************
RETURN TO STOCK and/or UNBRICK your N7 3G+
Click to expand...
Click to collapse
Before you begin, please make sure you have ADB and Fastboot drivers installed and working.
1. Download the factory image for the Nexus 7 3G=> 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
2. Extract the factory image into the same directory as your ADB and Fastboot executables (e.g. "\android-sdk\platform-tools")
3. Plug in your device. If you are booted into Android, open a command prompt to your ADB and Fastboot directory, then type:
Code:
adb reboot bootloader
If your device is powered off, press and hold both volume keys and the power button simultaneously. After holding all three buttons for a couple of seconds, your bootloader should launch. This should reboot you into the bootloader.
4. Type:
Code:
fastboot flash bootloader bootloader-tilapia-4.18.img
5. Type:
Code:
fastboot reboot-bootloader
6. Now type:
Code:
fastboot -w update image-nakasig-jdq39.zip
7. Optional: If you would like to relock your bootloader for warranty or security purposes, make sure you are in your bootloader screen again and type:
Code:
fastboot oem lock
8. If your tablet hasn't already rebooted automatically, you can type
Code:
fastboot reboot
Well done. You should now be back on stock Android 4.2.2
**************************************************************************************************************************************************************************************
These root tools are actually the easy way for rooting your device, so you can use them without problems.
IF YOU NEED MORE ABOUT THE NEXUS 7 3G+ "NAKASIG - TILAPIA" YOU MUST GO HERE
=> [Index]- 29 Dec 2012 - All for NEXUS 7 - "Nakasig/Tilapia" - (GSM/HSPA+)
and
=> NEXUS 7 3G-"nakasig"-For all Your Jelly Bean Discussions, Problems and Solutions
Click to expand...
Click to collapse
For my part I’ve used
the easy way by my fastboot guide for unlock my device,
Adb lines command for flash TWRP as permanent recovery,
Thanks for @mateorod, @Chainfire, @paulobrien and all members who helps for the development about the Nexus 7 3G+
The EASY WAY TO USE FASTBOOT LINES COMMAND
HELP FOR FLASH MORE FASTER WHEN YOU USE FASTBOOT LINE COMMAND
If you have got a problem with your adb or fastboot or recovery....it's very simply and faster
use this:
Download this file "fastboot.zip"
Install this file somewhere in one folder which is named "fastboot" on your PC
=> disk C: root
Unzipped this file on the folder "fastboot" and you will find 3 files:
- adb.exe
- AdbWinApi.dll
- fastboot.exe
and when you need to push something by the bootloader, you can use it.
Don't forget to push on this folder the file that you need. For exemple: boot.img or a recovery.img, etc...
The line command is :
Code:
c:\fastboot>
Enter
Code:
c:\fastboot>fastboot flash recovery recovery.img
Enter
If you want to flash the "recovery.img" file
******************************************************************
******************************************************************
If you want to know all lines of command
Code:
c:\fastboot>fastboot
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
Reserved in case
Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?
piski93 said:
Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?
Click to expand...
Click to collapse
Try the easy way on first
Use the post 2.
You can use it for all the install, except for for the permanent recovery where you will have to use ADB line command.
The best you can do, it's to use fastboot easy way and when you have finished, you learn and install correctly your sdk and check all your parameters. And when you will be ready you will be able to use adb lines command easily to install your recovery in a permanent way.
It's too long for a course about sdk, the best you can do it's to to search and read. Go to my index, and read the General guides
Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Skickat från min GT-I9300 via Tapatalk 2
znejk said:
Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut
philos64 said:
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut
Click to expand...
Click to collapse
I tried and everything seemed to work fine ... i Unlocked/flashed twrp then "mv recovery-from-boot.p recovery-from-boot.bak" didnt work cause it couldnt find the file... :/ i continued and flashed superboot and it seemed to work fine. Downloaded latest cm and gapps rebooted inte recovery and flashed them. Now I only have bootloop with cm10.1...
I know it aint bricked cause I think I can get into bootloader.
Edit: After a factory reset it worked! :>
znejk said:
How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
The Nexus7 is very difficult to brick. It still is possible, but as far as I know there is only one way to do it - remove or destroy the bootloader.
Under normal circumstances, the only time you do anything with the bootloader is unlocking/locking it, which simply does a minor modification. That's perfectly fine. And the normal custom-recovery/root process doesn't touch it, so that's fine too. Doing system updates (even legit OTA ones) might upgrade the bootloader, as might flashing custom roms. But as long as you don't interrupt the process during that critical step, it should be OK.
So outside of erasing the bootloader or flashing a completely incompatible bootloader and rebooting, your N7 should be safe.
adb command line Linux support
Hi All,
Am new to this forum and also to my newly bought N73G. So I am unsure about the complete process though explained step by step. One thing that i wanted to confirm was Does ADT Bundle for linux work the same as that of windows? Cause I run the same on my PC; these command line instructions would they work the same way on Linux terminal?
It's not the same as Windows. You can download the ADT Bundle for Linux.
Sent from my N7 3G between sky and earth
Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!
foxstam said:
Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!
Click to expand...
Click to collapse
Can you explain what do you think by Apple Mac Assistance ?
If it's for SDK Tools, you will find here the Apple version => DOWNLOAD FOR OTHER PLATFORMS
I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
quote:
Requirements:
...
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
thanks
elelab said:
I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
Requirements:
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
Click to expand...
Click to collapse
Yes, you can use the recovery-twrp-tilapia-2.3.2.1.img without problem
and when I writes "rename your select with the name of the recovery image you chose to download", I mean that you can rename the IMG file by "recovery" simply. It's more faster.
minimum steps to root Nexus7(3G) - for beginners
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
thanks
elelab said:
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
Click to expand...
Click to collapse
Answers:
1 - Yes, the advert is clear, all of your data will be erased !
2 - If you want to flash a rom custom, you need a recovery
elelab said:
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
Click to expand...
Click to collapse
Yes, it's correct. it's more faster to write: "recovery.img" than "recovery-twrp-tilapia-2.3.2.1.img".
It's the same file, just rename.
This has no effect on the recovery flash
Can I root my device (4.2.2) using Superboot yet ?
Re: [GUIDE] - Updated 08 Feb - Unlock and Root a Nexus7 3G “Nakasig- Tilapia”
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app
sukhjit_bhullar said:
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I can flash UPDATE-SuperSU-v1.04.zip in CWM/TWRP recovery to get root after update from 4.2.1
You will not loose any data.
Your bootloader will upgrade to 4.18 and still unlocked.
I installed "chainfire3d" on my phone which is running on jellybean,
when it self-reboot for installing library for "chainfire" it get stuck in android logo
after searching on net i figured out the way of disabling it (but works only one adb shell)
which is :
Code:
cd/system/lib/
sh cf3d_uninstall.sh
.
but the problems are:
Not able to get into recovery mode! As bootloader is locked ?
.
I already "wiped Data/cache"
using :
Code:
fastboot -w
it did wipe all data and cache but / still stuck in android logo ()
.
Ques are,.. :
1. How to get into recovery mode!
2. How to unlock bootloader!
3. Is it possible to get into adb shell using fastboot ?
4. Is their any command for rebooting into recovery mode via fastboot ????
My device is Iconbit Mercury q4 (Rooted)
SOLVED
.
(Device must be rooted, because we need to run ADB SHELL commands !)
.
Steps:
1. Install ADB on your Windows PC
2. Install ADB Drivers ( your device must be Detected by computer, otherwise you wont able to proceed!! )
----->remove battery and then put in again<----------
----->your device reboot itself (i guess)<--------
------>& then it will stuck in Android logo<------------------
(but the ,main thing is YOU CAN STILL ABLE TO USE ADB )
3. Connect your device with PC & then press (SHIFT+mouseRightClick) or simply open cmd ; )
type these command in command prompt :
4. adb devices (hit enter)
1234 iconbit <---- it looks somthing like that.. // If this command not work for you, try to install ADB drivers first !! //
5. su <--- ( this command gives you superuser permission )
----------> now # will appear <--------------
6. cd system <------- Change Directory to system
7. cd lib <------- Change Directory to lib
8. sh cf3d_uninstall.sh <----- it will delete Chainfire3D
------->your device reboot itself<--------------
9. Go to application Uninstall "Chainfire3D"
0. Cheers \../,
.
.
Command:
Code:
adb devices
su
cd system
cd lib
sh cf3d_uninstall.sh
Okay, I have seen many people using the unofficial TWRP on their device, and that's a little dangerous because it may be malicious, and you might not even know that.
I am not saying it is, but it can be.
Now, back to the topic here,
HOW TO INSTALL TWRP[2] AND GET ROOT ACCESS[3] and moreHere goes..
Before anything, you need to get ADB and FASTBOOT programs on your PC and get your drivers installed so you can communicate with the device through your computer.
To Download ADB and fastboot program, you can download this file (not my upload)
Extract it anywhere you want(and remember that location).
(lets say "C:\workspace\ADB" and I will use this path for this guide).Typically, the driver for ADB will install the first time you connect your device to your computer and:
Internet is available
USB Debugging is enabled on your phone
But the FASTBOOT driver would probably not be available yet. to get fastboot drivers, follow these steps:
Turn on and Unlock your device and connect it to PC via the USB cable.
Open CMD and execute "cd C:\workspace\ADB".(or you can open C:\workspace\ADB in file explorer and type CMD in the address bar to open CMD directly there.
Type "adb devices".
Now, your phone will ask something(permission to allow ADB access on the connected PC)allow it. After you allow it, the CMD will show a list of attached devices and the mode they are attached in, your device should show "device" for now.
If it does not, there is some problem, search on internet or ask for help here
Now type "adb reboot bootloader".
now your Phone will shutdown and open in a different state. It will say Fastboot on the screen.
Now the driver is installing or is already installed, to check, type this:
"adb devices" and it should show a list and your device's mode should change to "fastboot".
That's it for the ADB and FASTBOOT. You have the necessary things to continue.
Continue to next post for TWRP and the post next to it for ROOT ACCESS.
Now, we will talk about how to install TWRP
@DroidThug has been kind enough to get Official support of TWRP for this device.
Head over to this thread to download the official image file of the TWRP Recovery and keep it on your computer, this is the very first step you need to take.
Here is the thread: https://forum.xda-developers.com/leeco-le-1s/development/official-twrp-t3527566
If you are lazy enough to go through the thread, which i suggest you to visit, here is the direct link to the download page: https://dl.twrp.me/x3/
And here is the direct download link of the v3.0.3(latest as of 31st Jan, 2017): https://dl.twrp.me/x3/twrp-3.0.3-0-x3.img
Once you have the recovery image, you need to flash it through fastboot.
If you are following this guide from start, you should already be in fastboot and have CMD open on your PC in adb folder.
Now, a few things you might want to follow strictly if you are unsure how to do it:
Copy the recovery image file to "C:\workspace\ADB" (adb folder).
Rename that file to "twrp.img"
Now you need to execute this command from CMD to flash the file:
"fastboot flash recovery twrp.img" and press enter.
This will take a few seconds and will will be over soon.
Now you need to reboot directly into RECOVERY, because if you will boot to the system first, the Device will replace your newly flashed recovery with the stock recovery and all this will be wasted. But if you reboot to recovery first, it will patch those things up and will stay.
So, to reboot to recovery, you need to use the key combo to get into the recovery,
Press and hold "Volume UP" and "Power" Buttons till the screen goes off(from fastboot mode) and is lit up again and then leave the power key and 2-3 seconds later, leave the Volume key too.
You will enter into recovery mode and it will ask you "if you want to keep the System partition to read only or not?"
I'd recommend keeping it to read only unless you know what you are doing.
There you have it!
You have successfully installed TWRP on your device!
GET ROOT ACCESS
Okay, So you have the RECOVERY installed already
Now go to this page and download the latest "Recovery Flashable ZIP" from there. (Here is the latest one as on 31st Jan, 2017).
You can do this in two ways through Phone(with TWRP already present) and through PC.
Through PhoneAll you need to do is flash it through the recovery and thats it, you will have root access!
Here are the steps to flash ZIPs from Recovery:
Get the zip file you want to flash(the one downloaded above) and place it somewhere in the Phone's internal storage.
Reboot to recovery(Power off and then hold "Vol UP" and "Power" keys till the screen is lit up.).
Tap on "Install".
Navigate to the ZIP file you placed in your phone's internal storage.
Select it and swipe to flash it.
The last step might take a few seconds and will be done then.
After its done, that't it!
Reboot to system and you have ROOT ACCESS!
Through PCOkay, you would still need to reboot to recovery, but you can follow this guide if you don't want to copy the zip file on your phone for whatever reason you may have.
Here are the steps:
Enter recovery.
Select "Advanced->ADB Sideload" and swipe to start sideload.
Now connect your phone to PC.
Now open CMD in ADB folder.
Check if your device is detected by typing "adb devices". It should show a device with sideload state.
Now type "adb sideload " and drag the zip file into the cmd window.
OR
you can copy the zip to the adb folder and rename it to supersu.zip and write "adb sideload supersu.zip" in the CMD.
Now Press enter.
After this, in a few seconds, it will be over and you can reboot to system(it might automatically reboot to system too).
And that's it! There you have it!
You have ROOT ACCESS on your device!
5. Now the driver is installing or is already installed, to check, type this:
"adb devices" and it should show a list and your device's mode should change to "fastboot".
Click to expand...
Click to collapse
If the phone is on fastboot mode, "adb devices" supposed to not give any output. "fastboot devices" will show the device and mode as fastboot.
You will enter into recovery mode and it will ask you "if you want to keep the System partition to read only or not?"
I'd recommend keeping it to read only unless you know what you are doing.
Click to expand...
Click to collapse
My screen is broken (that's only white light and no digitiser). I dont have any other Le 1S to get idea.
1. Are you sure Vol Up + Power will enter into Recovery? Mine is 5.5.014S.
2. I want to make my system partition as writable. Can you tell how to achieve with hardware keys like Vol Up or down & power.
3. After step 2. Can I flash SuperSu from PC without enabling sideload. While on custom recovery , "adb devices" will show mode as recovery. So flashing supersu from here. Not sure if this is correct. On my Moto G falcon. whenever I go into TWRP, adb recovery and MTP works.
Also can you check whats the combination Vol Up+Vol Dn+Power. When it starts I can connect to adb but all partitions are read only and not allowing to make any change to device. Not sure if its due to encryption.
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb devices
List of devices attached
0123456789ABCDEF device
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb shell
[email protected]_HK:/ $ cat /data/misc/adb/adb_keys
/system/bin/sh: cat: /data/misc/adb/adb_keys: Permission denied
1|[email protected]_HK:/ $ id
uid=2000(shell) gid=2000(shell) groups=1003(graphics),1004(input),1007(log),1011(adb),1015(sdcard_rw),1028(sdcard_r),3001(net_bt_admin),3002(net_bt),3003(inet),3006(net_bw_stats) context=u:r:shell:s0
[email protected]_HK:/ $ su
/system/bin/sh: su: not found
[email protected]_HK:/ $ cd
[email protected]_HK:/data $ pwd
/data
[email protected]_HK:/ $ exit
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb reboot bootloader
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>fastboot devices
0123456789ABCDEF fastboot
**
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb devices
List of devices attached
0123456789ABCDEF device
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb install mirror.apk
[100%] /data/local/tmp/mirror.apk
Error: java.lang.NullPointerException: Attempt to invoke interface method 'android.os.IBinder android.os.IServiceManager.getService(java.lang.String)' on a null object reference
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb shell am start -n com.android.settings/.wifi.WifiSettings
java.lang.NullPointerException: Attempt to invoke interface method 'android.os.IBinder android.os.IServiceManager.getService(java.lang.String)' on a null object reference
at android.os.ServiceManager.getService(ServiceManager.java:55)
at android.app.ActivityManagerNative$1.create(ActivityManagerNative.java:2494)
at android.app.ActivityManagerNative$1.create(ActivityManagerNative.java:2492)
at android.util.Singleton.get(Singleton.java:34)
at android.app.ActivityManagerNative.getDefault(ActivityManagerNative.java:88)
at com.android.commands.am.Am.onRun(Am.java:295)
at com.android.internal.os.BaseCommand.run(BaseCommand.java:47)
at com.android.commands.am.Am.main(Am.java:99)
at com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:250)
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb shell dumpsys wifi
adb shell dumpsys wifi^C
C:\Users\Mkn\Downloads\Le1s drivers\minimal_adb_fastboot_1.4.1_portable>adb shell
[email protected]_HK:/ $ ls -ld sdcard
lrwxrwxrwx root root 2017-03-21 11:12 sdcard -> /storage/sdcard0
[email protected]_HK:/ $ cd /storage/sdcard0
/system/bin/sh: cd: /storage/sdcard0: Permission denied
2|[email protected]_HK:/ $ ls -ld
drwxr-xr-x root root 2017-03-21 11:12 .
[email protected]_HK:/ $ ls -ld /storage/sdcard0
d--------- system system 2017-03-21 11:12 sdcard0
[email protected]_HK:/ $
Update:
I some how managed to side load. My Phone got bootlop after installing twrp. Then flashed userdata by following http://forum.le.com/in/index.php?th...op-restart-solution-letv-le1s-x507-x509.1155/ . Now its factory reset as I can see the screenshot from PC.
Still interested in knowing what's that Vol Up+Vol Down + Power.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
Please do not try this unless you have a G1 from the uk, it may work on devices from europe but i'm not sure so do so at your own risk
Thought i'd make this quick guide as I just got a G1 and have been looking through tonnes of guides and trying to hunt down files, this method is a bit of a mix between some of the older methods of getting root. The only reason I had to do it like this is because I was not able to install any apps via the web browser because they wouldn't download.
0. Start with device powered off
1. Copy DREAIMG.NBH from HappyNewYearUK.zip to sd card
2. Hold camera and power to boot into spl and then then flash the nbh
3. Reboot device after flashing
4. Once booted turn device off, remove sim card and reboot
5. At the no sim screen slide keyboard open and type <enter>setprop persist.service.adb.enable 1<enter>
6. Power off, put simcard back in the device and reboot
7. On pc run "adb shell" then enter "am start -a android.intent.action.MAIN -n com.android.settings/.Settings"
8. Once settings has opened connect to wifi then go back to setup and complete setup steps
9. Install androot via adb "adb install androot.apk"
10. Power down device and put signed-kila_uk-ota-116470-prereq.TC5-RC7.7a5a0178.zip on sd card as update.zip
11. Hold home and end call button to boot into recovery
12. Press alt + l then alt + s to install the update
13. Press home+back after flashing and let the device reboot (do not touch it until back on android as it may do multiple flashes after exiting recovery)
14. Power down device and repeat from step 10 to 13 with signed-kila_eu-ota-146733.53218c9e(full update).zip
If you just wanted to get root to be able to install a recovery you can stop here, if you want to get up to the newest stock fw 1.6 follow the rest
15. Power down device and repeat from step 10 to 13 with signed-CRB17-from-TMI-RC9-eu.17667e06(inkrementalni update).zip (may not be necessary i dont remember lmao)
16. Power down device and repeat from step 10 to 13 with signed-kila_eu-CRB43-from-CRB17.1638e1b4.zip
17. Power down device and repeat from step 10 to 13 with signed-kila_eu-CRC1-from-CRB43-FIX2.1c36f92b.zip
18. Power down device and repeat from step 10 to 13 with signed-kila_eu-CRC37-from-CRC1.404fe17f.zip
19. Power down device and repeat from step 10 to 13 with signed-kila_eu-DRC92-from-CRC37.a7b90b4e.zip
20. Once the updates zips have both been installed you can reboot then get root using the Universal androot app
Installing Recovery
1. Copy the flash_image binary from flash_image.zip to sdcard
2. Copy recovery-RA-dream-v1.7.0.img to sdcard as recovery.img
3. From either adb shell or terminal emulator on the device do
su
mount -o remount, rw /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
Files are available here https://mega.nz/folder/wWolDQzC#Jb1HiYeyimFtlFUhIBlUqA
Later found this link which also has the files https://code.google.com/archive/p/official-android-firmware/downloads
reserved
reserved~