Hi all, good evening to all.
Need to fix my issue as soon as possible because need to unlock the phone and use it out of country. My AT&T Galaxy S4 (SGH i337) on Android Verion 4.2.2, Baseband Verison i337 ucuamf3, Build # JDQ39.i337 ucuamf3, Kernel Version i337 ucuamf3.
Spoke to AT&T customer service for few times regarding on the unlock code for the phone, confirmed i have the correct unlock code for the phone,and am had tried 6 times by using the same code was provided by AT&T, unfortunately every time i tried keep saying invalid number.
The phone was flashed one time by myself but can't remember which method i used but was found in this site somewhere.
Today went to AT&T store, a very nice sale person told me because the phone was unable to get unlock because it was flashed, he can tell when the phone reboot itself it has a "unlock lock simple" and "custom" word on the screen. He told me the only way to have the phone unlock is have the phone flash back to original by using ODIN 3.0.7 and ODIN Flash of MF3.
Can anyone please tell me above is right programs to have my Galaxy S4 flash back to original? If they are the right programs, where i can get them and step by step instructions to flash my phone.
Need help badly, thanks in advance
ert6ic said:
Hi all, good evening to all.
Need to fix my issue as soon as possible because need to unlock the phone and use it out of country. My AT&T Galaxy S4 (SGH i337) on Android Verion 4.2.2, Baseband Verison i337 ucuamf3, Build # JDQ39.i337 ucuamf3, Kernel Version i337 ucuamf3.
Spoke to AT&T customer service for few times regarding on the unlock code for the phone, confirmed i have the correct unlock code for the phone,and am had tried 6 times by using the same code was provided by AT&T, unfortunately every time i tried keep saying invalid number.
The phone was flashed one time by myself but can't remember which method i used but was found in this site somewhere.
Today went to AT&T store, a very nice sale person told me because the phone was unable to get unlock because it was flashed, he can tell when the phone reboot itself it has a "unlock lock simple" and "custom" word on the screen. He told me the only way to have the phone unlock is have the phone flash back to original by using ODIN 3.0.7 and ODIN Flash of MF3.
Can anyone please tell me above is right programs to have my Galaxy S4 flash back to original? If they are the right programs, where i can get them and step by step instructions to flash my phone.
Need help badly, thanks in advance
Click to expand...
Click to collapse
You need to know way more information than can be posted in a single reply. The best thing for you to do is read the "pinned" threads in the general and Q & A sections. Those threads will provide you with the information you need to know about your phone and answer the questions you have. If you try to rush things, you will end up with an unusable phone. Good luck.
Hi community I got my SGs4 from China and it is i9505 but came with i337 bootloader and Baseband,TW 4.3MK2
I got this from the phoen info app:
GENERAL INFO
Phone model:GT-i9505
Device type:jflteatt
Product Name:jflteuc
FIRMWARE INFO
Bootloader version: I337UCUEMK2
Baseban version: I337UCUEMK2
PDA version: I9505ZHUEMK2/i337UCUEMJ6
CSC version: i9500ZSUEMJ6
OS INFO
Build number: JSS15J.I9505ZHUEMK2(I337UCUEMJ6)
I want to know what firmware can I flash( because I want to update to 4.4.2 but dont know the right firmware),is my bootloader locked,can TWRP be install or do i need SS? and anything you can add will be appreciated
Well I think this info is important if you need more just ask me,if you need my build.prop I´ll upload ,looks like a hybrid firmware between I9505&i337
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Strephon Alkhalikoi said:
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Click to expand...
Click to collapse
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
The fact it was sealed doesn't mean much. You're the second or third person I've seen on the forum asking about this, and in the case of the first user he was able to get his device working perfectly using the AT&T firmware. Regardless, the fact you weren't able to pick up LTE is a clue. It leads me to believe that in this case the phone may be correct but the firmware wrong. Here's why.
If you had an AT&T phone, as I suspected, your phone should have picked up LTE if it was unlocked for use on any carrier, as both Telcel and Nextel use band 4, while Movistar supposedly uses band 2, bands which an AT&T phone supports (bands 1, 2, 4, 5, 7, and 17). Check Telcel's coverage map to be certain you have LTE coverage in your area.
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Try the firmware you downloaded, but I suspect you're going to want to return the phone if you want LTE service.
this phone.....
Strephon Alkhalikoi said:
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Click to expand...
Click to collapse
This is the scenario with my *chinese* version of the i9505.
I downloaded CPU-Z and it shows hardware: i9505, however, kernel build is a AT&T one.
I am REALLY SKEPTICAL to flash CM11 on it because I am very afraid to brick this phone. paid 300$ for it.
The funny thing is, I have the EXACT same phone as OP.
Anything I could try? please note AT&T doesn't work in Canada, nor I can borrow someone's AT&T sim card.
HOWEVER, I do have experience with a previous confirmed i337, and with bell it picked up LTE waves.
However this one doesn't.
Probably safe to flash?
I think my pat response to anyone purchasing these phones from now on will be to return them and purchase one through a Samsung-authorized retailer if Swappa isn't an option. For example, as of the time and date I write this, on Swappa there are currently 32 of the AT&T Galaxy S4 available, with prices ranging from $184 to $500US. The T-Mobile version, which doesn't have the locked bootloader of the AT&T model, has 8 devices available with prices ranging from $255-$310US. That doesn't include the Active variants or the MVNO-branded phones.
Purchasing a cell phone through eBay is, to be blunt, dangerous. You have no guarantee that the phone will be clean for activation, no guarantee that you won't have to do additional work to get the phone working, and no guarantee that the phone is even legitimate. Couple that with the buyers not doing their homework before purchasing and you get a clusterf**k of major proportions.
So, return the phone. If the seller doesn't accept returns, do a chargeback on your credit card. Or else put it up for sale as a parts phone.
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
VladimirMan93 said:
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
Click to expand...
Click to collapse
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie_Stark said:
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Click to expand...
Click to collapse
I did some more snooping around desperately trying to find out more information about this phone and the last thing I remember reading about before going to bed was:
No matter what we try, this phone is with a locked bootloader after the knox 4.3 update.
Unofficial firmware can and will brick this phone resulting either in a soft-brick OR, for the more unlucky ones, even a hard brick.
BUT, I also found other contradictory posts claiming that regardless the presence of the knox update, the bootloader IS infact unlocked.
It's hard to take a side due to the lack of tools to verify if the bootloader is in fact locked.
Could you please do me a HUGE favor?
if yes:
Go to your download mode and if possibly post a snapshot of the screen. I've included mine.
For some stupid reason, even though it's a i9505, it is recognized as AT&Ts SGH-I337.
Since I don't have my camera lying around, I'll write word for word what's on my screen:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
System Status: Official
Knox Level Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write Protection Enable
eMMC Brust Mode: Enabled
Click to expand...
Click to collapse
If this flash works for you, please let me know.
If the BL is unlocked in the Firmware you're trying to flash to it, Please let me know.
I want to go out of this nightmare and continue with my work.
and if you could share links in a PM to me or here, that would be simply perfect.
Cheers and thanks for everything
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Albie_Stark said:
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Click to expand...
Click to collapse
Anxiously waiting your progress!
It's simple.
You got an SGH-I337.
You probably got a rom installed that is ported from I9505 and they didn't edit the build.prop.
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
MK2 & NB2 for i9505 HKong version give "secure check Fail:system" cant find answer for that......with the 4.42 firmware it gave me "secure check fail:aboot"
Strephon Alkhalikoi said:
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
Click to expand...
Click to collapse
man ,following your advice,flashin mk2 for i337 I done with this, Should hear you since the begining now odin is flashing
"Damn you 15's :Joey Tribbiani Quotes"
Hope this help you
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Do not do anything stupid my friend!!
Albie_Stark said:
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Click to expand...
Click to collapse
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
VladimirMan93 said:
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
Click to expand...
Click to collapse
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Albie_Stark said:
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Click to expand...
Click to collapse
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
VladimirMan93 said:
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
Click to expand...
Click to collapse
OMG I paid 255$ !!! I belive Isaw you in other forum asking right??
Hope they find how to unlock the BL or AT&T give us Unlock BL with the Lolipop update
Hi, I need xda's solid information to upgrade my rooted S4 sgh-i337 to 5.0 from 4.4.2. I'm a Mac user, so I haven't been able to find anything useful so far. It was an unlocked AT&T phone, now being used with T-Mobile. I have already downloaded the 5.0 update.zip from AndroidFileHost onto my Mac. OK, here's a stupid question: Why couldn't I simply do a factory reset (in which case would I lose the root?) and then update from Recovery Mode ["apply update from external source"], and re-root later? Thanks for reading, and for whatever help you can give. Oh, I'm still learning, so please don't assume I know anything.
I have other issues I just discovered from Samsung: Because the phone has been unlocked [I bought it this way], I have not been receiving any updates and I have already missed 6 updates. My signal has become weaker, sometimes calls get dropped, and the phone seems to get hotter so I have to charge it more frequently. The savvy tech at Samsung said I could overcome having to re-lock the phone so AT&T [see T-Mobile above] can send me the updates by going to Best Buy and let the Samsung Rep do it all for me, including updating to 5.0.1. The problem is the phone is rooted. Will Samsung not help me if they know the phone is rooted ? (--another naive question, I guess.)
I don't know about flashing anything from Mac or Linux. We used to use Heimdall (command line version) on the S2, but I don't know if that is viable for the S4.
If you take it to BestBuy and tell the tech you are rooted, I bet he will still help you. What is the worst he can do, say no. But if he flashes 5.0.1 for you, you will lose root, as stock 5.0.1 will not be rooted.