[Q] G900p Bloqué dans le logo samsung s5 - Galaxy S 5 Q&A, Help & Troubleshooting

Bonjour
SVP Help j'ai essayer de rooter mon telephone en utilisant philz_touch_6.26.6
et maintenant je me trouve bloquer dans le logo samsung GALAXY S5
Help please please please ... : Pleure:: Pleure:: Pleure:: Pleure:
Samsung SM-G900P

manageur said:
Bonjour
SVP Help j'ai essayer de rooter mon telephone en utilisant philz_touch_6.26.6
et maintenant je me trouve bloquer dans le logo samsung GALAXY S5
Help please please please ... : Pleure:: Pleure:: Pleure:: Pleure:
Click to expand...
Click to collapse
vous parlais anglais? ceci est un forum anglais, s'il vous plaît utiliser cette langue
Do a factory reset, see if that works. If not go to download mode flash stock firmware.

Mod Edit
May I remind you of the XDA RULES
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
malybru
Forum Moderator

lingowistico said:
vous parlais anglais? ceci est un forum anglais, s'il vous plaît utiliser cette langue
Do a factory reset, see if that works. If not go to download mode flash stock firmware.
Click to expand...
Click to collapse
Hello
I apologize I dont knew for the language.
I have make factory reset. always nothing
I try to flash with a Rom download since Sammobile always nothing
this is the screenshot of Odin and my phone
cjoint.com/c/EFxrjOgRSF6
cjoint.com/c/EFxrnt6AmF6

manageur said:
Hello
I apologize I dont knew for the language.
I have make factory reset. always nothing
I try to flash with a Rom download since Sammobile always nothing
this is the screenshot of Odin and my phone
cjoint.com/c/EFxrjOgRSF6
cjoint.com/c/EFxrnt6AmF6
Click to expand...
Click to collapse
You probably need to flash partition table (pit file).
Get it here http://forum.xda-developers.com/showthread.php?t=2763157

lingowistico said:
You probably need to flash partition table (pit file).
Get it here http://forum.xda-developers.com/showthread.php?t=2763157
Click to expand...
Click to collapse
No that gives nothing :'(
Why that blocks? that is the Rom? It is necessary to look for a more powerful Rom? or for anything like that? Either there is a security system which blocks
in Downloading mode I have SECURE DOWNLOAD : ENABLE it's normal?

manageur said:
No that gives nothing :'(
Why that blocks? that is the Rom? It is necessary to look for a more powerful Rom? or for anything like that? Either there is a security system which blocks
in Downloading mode I have SECURE DOWNLOAD : ENABLE it's normal?
Click to expand...
Click to collapse
Yes it's normal. Go here and look at step #3. Flash the pit file and the rom you're flashing at the same time.

G900pvpu2bod3
I inderstand where is the probleme but i dont know the solution
My software version is G900PVPU2BOD3, and this Rom is a Factory Reset Protection.
In case you’re wondering what “Factory Reset Protection” actually is, well, it’s a useful security feature in case of device theft. It prevents anyone from resetting your device after being stolen, thereby making it useless for the thief to use.
I thing I must flash my phone with the same ROM "G900PVPU2BOD3" no?

manageur said:
I inderstand where is the probleme but i dont know the solution
My software version is G900PVPU2BOD3, and this Rom is a Factory Reset Protection.
In case you’re wondering what “Factory Reset Protection” actually is, well, it’s a useful security feature in case of device theft. It prevents anyone from resetting your device after being stolen, thereby making it useless for the thief to use.
I thing I must flash my phone with the same ROM "G900PVPU2BOD3" no?
Click to expand...
Click to collapse
Oh. Well try what I said above. Ie flashing pit and rom at the same time. If that doesn't help and your problem really is "factory reset protection" I can't help. Wait for someonw else to reply or go to your local arab cellphone shop they hack theft protection and blacklisted imeis for about 50-100 $.

lingowistico said:
Oh. Well try what I said above. Ie flashing pit and rom at the same time. If that doesn't help and your problem really is "factory reset protection" I can't help. Wait for someonw else to reply or go to your local arab cellphone shop they hack theft protection and blacklisted imeis for about 50-100 $.
Click to expand...
Click to collapse
can you find me this rom please? " G900PVPU2BOD3 "

manageur said:
can you find me this rom please? " G900PVPU2BOD3 "
Click to expand...
Click to collapse
I've sent you a pm since sammobile is forbidden here.

It works, i flash it with G900PVPU2BOD3 and it works
I'M SO HAPPY AND I THANK ALL OF YOU FOR YOUR HELP.
Specially lingowistico YOU ARE THE BEST :good:

Related

[Q] [LG P700] CM11 Youtube

would anyone find a solution against the pixelation on youtube ?
Romsss92 said:
would anyone find a solution against the pixelation on youtube ?
Click to expand...
Click to collapse
Hi Romsss92,
I didn't realize that youtube has pixelation problems till i read your post, and I checked by myself.
But it is true, it happens to me the same. I am using CM11-Kitkat prime, date 6 march 2014.
Let me know if you find a solution.
Thank you.
OK, I'll try to find a solution but I can not guarantee anything because devloppeurs do not know I think
I also have this problem on CM11 cr3pt. I find a way of not having the pixelation I look at my video on the browser.
sorry for my english I'm french
christo574 said:
I also have this problem on CM11 cr3pt. I find a way of not having the pixelation I look at my video on the browser.
sorry for my english I'm french
Click to expand...
Click to collapse
LOL moi aussi xD
Soo thanks for your great idea i m french too but we need to find also an solution about this ...
Romsss92 said:
LOL moi aussi xD
Soo thanks for your great idea i m french too but we need to find also an solution about this ...
Click to expand...
Click to collapse
je sais tu est aussi sur frandroid LOL
I think it's the ROM, because when I'm on a stock ROM I do not have to type of problem
christo574 said:
je sais tu est aussi sur frandroid LOL
I think it's the ROM, because when I'm on a stock ROM I do not have to type of problem
Click to expand...
Click to collapse
Oui justement je cherche des solutions pour Frandroid
Yes that's the problem but i hope one developer watch my question and try to find a solution for us
Romsss92 said:
Oui justement je cherche des solutions pour Frandroid
Yes that's the problem but i hope one developer watch my question and try to find a solution for us
Click to expand...
Click to collapse
Two days ago, my youtube app was updated. From this moment, I can see videos without pixelation.

note 3 problem

Hello,
I'm french. I have a SM-N9005 (note 3) 16 GO from Hong Kong. Do not begin received the French and not 4G enabled in the settings, I decide to root my GN3. Odin, I do not get that "Fails" and ODIN error. Ext 4 invalid So I perform a self-root but I get the samsung screen and it is frozen. I do not know what to do. I need help please!
cagetsmoll said:
Hello,
I'm french. I have a SM-N9005 (note 3) 16 GO from Hong Kong. Do not begin received the French and not 4G enabled in the settings, I decide to root my GN3. Odin, I do not get that "Fails" and ODIN error. Ext 4 invalid So I perform a self-root but I get the samsung screen and it is frozen. I do not know what to do. I need help please!
Click to expand...
Click to collapse
How did you try and root it?
Sent from my SM-N9005
cagetsmoll said:
Hello,
I'm french. I have a SM-N9005 (note 3) 16 GO from Hong Kong. Do not begin received the French and not 4G enabled in the settings, I decide to root my GN3. Odin, I do not get that "Fails" and ODIN error. Ext 4 invalid So I perform a self-root but I get the samsung screen and it is frozen. I do not know what to do. I need help please!
Click to expand...
Click to collapse
I guess u need to flash stock again.
Check this thread :
http://forum.xda-developers.com/showthread.php?t=2708531
Sent from somewhere under the sky, at the corner of this rounded earth.
@ celderic, Here is my original configuration Firmware info:
N9005ZTUENB5
Original CSC : BRI
Firmware's CSC: BRI
Country: Taïwan
Produit code: SM-N9005ZWABRI
and I Tried N9005XXDMK2 and N9005XXUENB4. Failed ODIN.
celderic said:
How did you try and root it?
Sent from my SM-N9005
Click to expand...
Click to collapse
I will look at it this evening after work.
cagetsmoll said:
@ celderic, Here is my original configuration Firmware info:
N9005ZTUENB5
Original CSC : BRI
Firmware's CSC: BRI
Country: Taïwan
Produit code: SM-N9005ZWABRI
and I Tried N9005XXDMK2 and N9005XXUENB4. Failed ODIN.
Click to expand...
Click to collapse
cagetsmoll said:
I will look at it this evening after work.
Click to expand...
Click to collapse
U shld not use international 32gb firmware onto ur 16gb device.
It has different partition.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
U shld not use international 32gb firmware onto ur 16gb device.
It has different partition.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Bonjour, j'ai essayé cette méthode.http://forum.xda-developers.com/showthread.php?t=2627291 Pour la première partie, aucun problème. Par contre, lorsque sur PDA je mets CWM Recorvery, tout se passe bien, mais le téléphone se remet en marche sans cesse et je n'ai pas accès au mode recorvery, juste le mode dowloading. Que faire? Merci pour votre aide!
Hello, I tried this method. http://forum.xda-developers.com/showthread.php?t=2627291 For the first part, no problem. By cons, when I put on PDA Recorvery CWM, everything goes well, but the phone restarts constantly and I do not have access to Recorvery mode, just dowloading mode. What to do? Thank you for your help!
cagetsmoll said:
Bonjour, j'ai essayé cette méthode.http://forum.xda-developers.com/showthread.php?t=2627291 Pour la première partie, aucun problème. Par contre, lorsque sur PDA je mets CWM Recorvery, tout se passe bien, mais le téléphone se remet en marche sans cesse et je n'ai pas accès au mode recorvery, juste le mode dowloading. Que faire? Merci pour votre aide!
Hello, I tried this method. http://forum.xda-developers.com/showthread.php?t=2627291 For the first part, no problem. By cons, when I put on PDA Recorvery CWM, everything goes well, but the phone restarts constantly and I do not have access to Recorvery mode, just dowloading mode. What to do? Thank you for your help!
Click to expand...
Click to collapse
Is this the file you used?
hey_joe said:
Is this the file you used?
Click to expand...
Click to collapse
Yes, this is the file, why?
cagetsmoll said:
Yes, this is the file, why?
Click to expand...
Click to collapse
It should have worked when done correctly. Did you check if reactivation lock is on when in download mode?
hey_joe said:
It should have worked when done correctly. Did you check if reactivation lock is on when in download mode?
Click to expand...
Click to collapse
What is reactivation lock? I think I'll try again tonight procedure. Should I resume from the beginning of this solution?
A big thank you for your help.
cagetsmoll said:
What is reactivation lock? I think I'll try again tonight procedure. Should I resume from the beginning of this solution?
A big thank you for your help.
Click to expand...
Click to collapse
Reactivation lock is a security feature where if you lost your phone nobody can factory reset or recover the phone without entering the password. It prevents flashing root or custom recovery when on.
No just continue where you left off.
Just out of curiosity, are you on 4.4.2 before you tried to root and messed up the phone?
hey_joe said:
Reactivation lock is a security feature where if you lost your phone nobody can factory reset or recover the phone without entering the password. It prevents flashing root or custom recovery when on.
No just continue where you left off.
Just out of curiosity, are you on 4.4.2 before you tried to root and messed up the phone?
Click to expand...
Click to collapse
My original firmware is N9005ZTUENB5. I I did not have the 4G settings and I wanted root to be able to get it and suddenly that FAIL with ODIN. The phone is out of service for a week and I think I found the solution, so it can work again.

Is there a solution to root + recovery a xt1572 in on click ?

Hello,
after a search in the forum, i did not find a solution to root and install recovery in one click for a XT1572 like it is possible with th LG G3 for exemple.
Did I badly look ?
Is there a solution in preparation ?
Thank's to help a lost french...
No need.. Flashing recovery and root takes 30 sec.
Ok, thanks a lot, but where i can find all the procedure in the right order, to avoid to brick my Moto X Style ?
(I found a procedure but i am not sure to understand all and it seems to be for the xt1755, and not for the european one, xt1752)
Hello you can use thread for xt1575 i have use it yesterday. .
http://forum.xda-developers.com/moto-x-style/development/rom-trupurex-fast-smooth-t3237155
And this can help you.
http://forum.xda-developers.com/moto-x-style/general/guides-how-to-guides-beginners-t3200808
But use better version 2.8.7.1 of twrp , apparently it solve some issue.
Good flash
Hello, I own XT1572 "STYLE" EU version.
For stock 5.1.1 Lollipop I used this tool. It helps to unlock bootloader, after that you will loose all data on internal storage, then flash TWRP and install SuperSu.
At the beginning, remember to enable developers menu, and check OEM unlocking.
For stock 6.0 Marshmallow I have experimented a lot, and created some sort of step by step guide. Idea is same, unlock bootloader, flash custom recovery and later SuperSu.
Good Luck!
Thank's a lot, i will look on your thread as soon as possible.
In your (very good) guide, there is no method to unlock the boot loadr, is it normal ?
c3drik 67 said:
Salut tu peux utiliser la procédure pour le 1575 sans soucis. Je l'ai fait avant hier pour installer cette rom .
http://forum.xda-developers.com/moto-x-style/development/rom-trupurex-fast-smooth-t3237155
Et tu peux t'aider de cette marche à suivre.
http://forum.xda-developers.com/moto-x-style/general/guides-how-to-guides-beginners-t3200808
Mais utilise plutot la version 2.8.7.1 de twrp elle règle apparement quelques soucis.
Bon flash
Click to expand...
Click to collapse
English brah
Sent from my XT1575 using Tapatalk
patt2k said:
English brah
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Sorry i have change language.
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
Zebulon said:
In your (very good) guide, there is no method to unlock the boot loadr, is it normal ?
Click to expand...
Click to collapse
Look this thread. http://forum.xda-developers.com/moto-x-style/general/moto-x-style-how-to-unlock-bootloader-t3192140
And in my first reponse in 2de thread is a section How to unlock your bootloader
or just look on google for french version. http://www.phonandroid.com/forum/de...r-de-votre-motorola-moto-x-style-t132473.html
Good luck
Thank you, i will take a look after the holidays.
(Et merci pou la traduc... )

3rdmodem MM versions HONOR 7 PLK-L01

Hi , here's my 3rdmodem collection versions
B330 / B370 / B371
MD5 checksum of 3rd modem.img files:
1e7d9308aec9474e602a7e24afb2fb6e B330 md5
e30b7658a5e7a1b59ce36fda2e5a8e92 B370 md5
c62e565c0d50a99cc76a56bf739d0cef B371 md5
You can flash with TWRP this Aroma installer
https://drive.google.com/file/d/0B3kJoB8n78hZV1VHWGdZSDNoR2c/view?usp=sharing
- Choice only one of course
File link is wrong...
memht said:
File link is wrong...
Click to expand...
Click to collapse
Ok , i've change it :good:
Salut ami français, ce modem sert à quoi exactment ? pour le flasher c'est "fastboot flash modem modem.img" ?
In english : Hi, dear french folk, i'm wondering what this modem is for ? can we flash it with a regular command such as "fastboot flash modem modem.img" ?
Gazatus said:
Salut ami français, ce modem sert à quoi exactment ? pour le flasher c'est "fastboot flash modem modem.img" ?
Click to expand...
Click to collapse
@Gazatus
Salut ami,
Désolé, mais ce ne forum français. S'il vous plaît écrire vos messages dans la langue anglaise aussi!
Merci d'avance (Google traduction!)
again in English:
Hello friend,
Sorry about but this is no French forum. Please write your posts in English language too!
Thanks in advance (Google translation!)
and no, we are talking about '3dmodem' in this tread, so please try "fastboot flash 3dmodem 3dmodem.img"
non-toxic said:
@Gazatus
Salut ami,
Désolé, mais ce ne forum français. S'il vous plaît écrire vos messages dans la langue anglaise aussi!
Merci d'avance (Google traduction!)
again in English:
Hello friend,
Sorry about but this is no French forum. Please write your posts in English language too!
Thanks in advance (Google translation!)
and no, we are talking about '3dmodem' in this tread, so please try "fastboot flash 3dmodem 3dmodem.img"
Click to expand...
Click to collapse
Oups, i'm sorry, indeed i've seen that the autor was french, but my question can help someone so i've editied my post to give you a translation of my question.
I've just bought a Honor 7 (not in a store - refurbished) and the screen have been replce... I got a very very bad battery (SOT = less than 1 hour) and the screen colors are bright (even red seems bright), moreover my "smartbutton" don't work. I've bought a battery (Nohon 3100mah) on Aliexpress.
Now i got a very bad cell radio signal reception... I'don't know if it's a software problem or a hardware one... so i'll try to flash a new modem / modified one
Gazatus said:
Oups, i'm sorry, indeed i've seen that the autor was french, but my question can help someone so i've editied my post to give you a translation of my question.
I've just bought a Honor 7 (not in a store - refurbished) and the screen have been replce... I got a very very bad battery (SOT = less than 1 hour) and the screen colors are bright (even red seems bright), moreover my "smartbutton" don't work. I've bought a battery (Nohon 3100mah) on Aliexpress.
Now i got a very bad cell radio signal reception... I'don't know if it's a software problem or a hardware one... so i'll try to flash a new modem / modified one
Click to expand...
Click to collapse
It may be a motherboard issue.
memht said:
It may be a motherboard issue.
Click to expand...
Click to collapse
Yeah i think too... Dam seller, he don't tell me about that ! btw what is "3trmodem" ?
At first i recommend you to make a full wipe followed by a full flash of B180! At my opinion this is at this moment the best piece of Software for our H7!
Otherwise you should check the warranty of your H7! Maybe your seller have to give you some warranty for this phone.
non-toxic said:
At first i recommend you to make a full wipe followed by a full flash of B180! At my opinion this is at this moment the best piece of Software for our H7!
Otherwise you should check the warranty of your H7! Maybe your seller have to give you some warranty for this phone.
Click to expand...
Click to collapse
Thank, the phone comes with B370, i've rooted it and now i'm downgrading to B180, I know that the warranty won't help me, the phone is unlocked and now it has his screen replaced... Many reason to void my warranty. Thank for your help.
Can anyone explain me what is this 3rdmodem ????
Gazatus said:
Thank, the phone comes with B370, i've rooted it and now i'm downgrading to B180, I know that the warranty won't help me, the phone is unlocked and now it has his screen replaced... Many reason to void my warranty. Thank for your help.
Can anyone explain me what is this 3rdmodem ????
Click to expand...
Click to collapse
3rdmodem is a modem partition responsible of drivers for network, it is a standalone partition like system, cust, boot, userdata etc. @Speedo.thc posted them so that we can easily flash them if we are installing ROM, as some ROMs here tends to flash that partition too.

Mxq pro max

Hello need info on this box
I can not find any forum that talks about this one
I will like the identified what would help me found a rom
I'm counting on you
(MXQ Pro Max 4GB 32GB ram)
Bonjour besoin d'info sur cette box
Je ne trouve aucun forum qui parle de celle-ci
J'aimerai l'identifiés ce qui m'aiderait a trouvé une rom
Je compte beaucoup sur vous
(MXQ Pro Max 4go ram 32go )
X-Rudboy-X said:
Hello need info on this box
I can not find any forum that talks about this one
I will like the identified what would help me found a rom
I'm counting on you
(MXQ Pro Max 4GB 32GB ram)
Bonjour besoin d'info sur cette box
Je ne trouve aucun forum qui parle de celle-ci
J'aimerai l'identifiés ce qui m'aiderait a trouvé une rom
Je compte beaucoup sur vous
(MXQ Pro Max 4go ram 32go )
Click to expand...
Click to collapse
Hi mate do you know what processor and wifi chip you have in it?
Possesseur rockchip rk3328
Et carte wifi comment savoir ?
X-Rudboy-X said:
Possesseur rockchip rk3328
Et carte wifi comment savoir ?
Click to expand...
Click to collapse
Ok I think this is your wifi chip it should start with RTL
Ok laissez-moi le temps de la re démonter et je vous tiens informé
Je tiens au passage à vous remercier car sur aucun d'autres forum on ne me répond
Rtl8723cs
1212m13
g124
Keep it to English please
pcmender2005 said:
Keep it to English please
Click to expand...
Click to collapse
Sorry for my english
I will make an effort
X-Rudboy-X said:
Rtl8723cs
1212m13
g124
Click to expand...
Click to collapse
This android 9.0 will work on your box.
I have it on mine and my box is a mrx pro with a rk3328 and rtl8723 here is the link
https://chinagadgetsreviews.com/download-android-9-0-firmware-for-a5x-max-tv-box.html
Use the tools I have ringed and read the doc to help you. I am not responsible if you have trouble flashing.
thank you very much for your help I'm a little afraid to start this one does not work I'm afraid I did not find my original rom:confus:
X-Rudboy-X said:
thank you very much for your help I'm a little afraid to start this one does not work I'm afraid I did not find my original rom:confus:
Click to expand...
Click to collapse
You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0
OK I will trust you but especially do not abandon me it does not work I will still need you
QUOTE=pcmender2005;78883176]You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0[/QUOTE]
X-Rudboy-X said:
OK I will trust you but especially do not abandon me it does not work I will still need you
QUOTE=pcmender2005;78883176]You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0
Click to expand...
Click to collapse
[/QUOTE]
I will be here i won't abandon you, but I do work long hours i will answer you when I can mate
Thank's
still not tested I am very afraid that it will miss
I just tested and it worked all works fine just impossible to activate my Bluetooth someone has an idea that my Bluetooth is not working
Here are some pics
Some more
yes that's what I did except that the bluetooth tab is grayed out
here I found a firmware that works on my box plus it looks like mine has everything works thanks to you for your help for info here is this firmware
https://mega.nz/#!RBsxUQAI!F5AFKGVE9_Mgi_DYsNv0w3CfTUy0dWtv72zs8ws3HDY

Categories

Resources