Model : SGP312
Android: 5.0.2
Market: Germany
Build : 1273-3719_10.6.A.0.454_R2E
Included:
- UPDATE-SuperSU-v2.46.zip
Rom is prerooted but XZDualRecovery isn't working for TabZ with Lollipop at the moment so it's not included, check this thread for news about it : http://forum.xda-developers.com/showthread.php?t=2261606
Flash this zip from 4.4.* recovery and you're done
https://mega.nz/#!YFlihZoa!qR87H4kkVdE9GEG5kkxJ59-EBlc6CdsimqKgNJRJoTw
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
botsaris said:
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
Click to expand...
Click to collapse
Sure : MD5 Sum is 2245197dac0a7388d7f2f2b3ae63c26a
Tried twice but its not booting.....
*justintime* said:
Tried twice but its not booting.....
Click to expand...
Click to collapse
For me everything went fine...First boot takes while.
I know first boot takes a while. But its not booting at all. Screen stays off and i can only enter fastboot. But never mind. I while take a different route
Does it work with locked Bootloader?
redsk1n said:
Does it work with locked Bootloader?
Click to expand...
Click to collapse
yes, it's stock rom with stock kernel
Confirmed working.
Thank you!
Problem...
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
DatFrosty said:
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
Click to expand...
Click to collapse
Try VOL+ Power to reset it.
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Tried it once, but probably held the buttons down too shortly.
Managed to get it to flash once, the three times.
Got into flashmode from there, everything running fine on 5.0.2 stock atm.
I guess next step is to root it
Thanks again man.
DatFrosty said:
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Click to expand...
Click to collapse
This happens if tablet hangs with screen off.
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
duke_dreadmoore said:
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
Click to expand...
Click to collapse
Yes you can. But this ROM on 1st post doesn't contain recovery, so you will have to install .zip with it via CWM too.
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
bobo1425 said:
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
Click to expand...
Click to collapse
without root and recovery no way to update.
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Rassilon7 said:
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Click to expand...
Click to collapse
Hi, I should update my post with new build 10.7.A.0.22 (android 5.1.1) tomorrow
Thank you, that's very kind.
Related
Hi, All -- I rooted my Google Play Edition Galaxy S4 using Chainfire's method, and it's now generating an error when it tries to install the OTA update to Android 4.3. I've unrooted the phone using SuperSU and have wiped it, but it still won't install the OTA.
Can anyone help?
Thanks, Alan
carrot34 said:
Hi, All -- I rooted my Google Play Edition Galaxy S4 using Chainfire's method, and it's now generating an error when it tries to install the OTA update to Android 4.3. I've unrooted the phone using SuperSU and have wiped it, but it still won't install the OTA.
Can anyone help?
Thanks, Alan
Click to expand...
Click to collapse
Have you re-locked the bootloader?
gee2012 said:
Have you re-locked the bootloader?
Click to expand...
Click to collapse
Ah. No, I haven't. I didn't realize that was necessary, and I'm searching now and not finding instructions on how to do that. Can you point me in the right direction?
Thank you!
Alan
carrot34 said:
Ah. No, I haven't. I didn't realize that was necessary, and I'm searching now and not finding instructions on how to do that. Can you point me in the right direction?
Thank you!
Alan
Click to expand...
Click to collapse
Look here for how to http://forum.xda-developers.com/showthread.php?t=2363025. For locking the BL type: fastboot oem lock.
carrot34 said:
Hi, All -- I rooted my Google Play Edition Galaxy S4 using Chainfire's method, and it's now generating an error when it tries to install the OTA update to Android 4.3. I've unrooted the phone using SuperSU and have wiped it, but it still won't install the OTA.
Can anyone help?
Thanks, Alan
Click to expand...
Click to collapse
If you rooted using CF-AutoRoot then it's likely your recovery was replaced. You need to flash the stock 4.2.2 recovery in all likelihood.
To be sure, what error does the screen show when you try to install the OTA. That will help us diagnose what isn't passing the OTA pre-check.
I have same issue here trying to update OTA update. Device rooted and bootloader unlocked.
When trying to install 4.3 OTA update, it rebooted into TWRP and start flashing but twrp mentioned some files not found and aborted, didn't even get a chance to look at the errors. After boot back up, it still show 4.2.2 and checking system update doesn't say new update found anymore.
tublah said:
If you rooted using CF-AutoRoot then it's likely your recovery was replaced. You need to flash the stock 4.2.2 recovery in all likelihood.
To be sure, what error does the screen show when you try to install the OTA. That will help us diagnose what isn't passing the OTA pre-check.
Click to expand...
Click to collapse
Thanks so much for helping with this. The screen just says "error." Is there any way I can get more information? And if flashing stock 4.2.2 recovery is what I need to do, how would I do it?
Thank you!
Alan
carrot34 said:
Thanks so much for helping with this. The screen just says "error." Is there any way I can get more information? And if flashing stock 4.2.2 recovery is what I need to do, how would I do it?
Thank you!
Alan
Click to expand...
Click to collapse
No problem. Go to this thread http://forum.xda-developers.com/showthread.php?p=43500355 and follow the steps, but try at first only doing the step that flashes recovery. Can you take a photo of your screen? What recovery are you using to flash the OTA?
tublah said:
No problem. Go to this thread and follow the steps, but try at first only doing the step that flashes recovery. Can you take a photo of your screen? What recovery are you using to flash the OTA?
Click to expand...
Click to collapse
Thanks, but there isn't any thread listed there. Could you try posting it again?
I can get a screen shot of the error message, but it will take a little while. All it says is "Error!"
Thanks, Alan
carrot34 said:
Thanks, but there isn't any thread listed there. Could you try posting it again?
I can get a screen shot of the error message, but it will take a little while. All it says is "Error!"
Thanks, Alan
Click to expand...
Click to collapse
I updated my previous post. If you really want fool-proof working 4.3, you can follow the steps in this thread: http://forum.xda-developers.com/showthread.php?t=2388504 and just ODIN the full stock 4.2.2 and then try to apply the upgrade.
tublah said:
If you rooted using CF-AutoRoot then it's likely your recovery was replaced. You need to flash the stock 4.2.2 recovery in all likelihood.
Click to expand...
Click to collapse
This. I was stuck on this for a while. You first need to make sure you have stock recovery. I also had to reflash a new system IMG but the recovery was a big problem.
OK, I followed the instructions to re-lock my bootloader, which seems to have been done successfully, but I'm still facing the same error (as seen in the attached photo). So I guess I need to flash the stock recovery. I'm game to try the Heimdall approach or the ODIN approach that have already been suggested, but I wonder if there's a simpler way to do this. Based on what I read here, it sounds like I could just download stock recovery from here, and then just type these commands to flash it:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Does that approach make sense? And sound safe? Or would I be better off going down the ODIN or Heimdall roads?
Thank you all for your help in navigating this!
Alan
carrot34 said:
OK, I followed the instructions to re-lock my bootloader, which seems to have been done successfully, but I'm still facing the same error (as seen in the attached photo). So I guess I need to flash the stock recovery. I'm game to try the Heimdall approach or the ODIN approach that have already been suggested, but I wonder if there's a simpler way to do this. Based on what I read here, it sounds like I could just download stock recovery from here, and then just type these commands to flash it:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Does that approach make sense? And sound safe? Or would I be better off going down the ODIN or Heimdall roads?
Thank you all for your help in navigating this!
Alan
Click to expand...
Click to collapse
Its worth a try. Not sure but you might have to he unlocked to flash stuff.
Sent from my Nexus 10 using XDA Premium HD app
tublah said:
Its worth a try. Not sure but you might have to he unlocked to flash stuff.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
OK, that didn't work. I get a "Secure check failed" message.
tublah said:
No problem. Go to this thread http://forum.xda-developers.com/showthread.php?p=43500355 and follow the steps, but try at first only doing the step that flashes recovery. Can you take a photo of your screen? What recovery are you using to flash the OTA?
Click to expand...
Click to collapse
OK! Thank you all for the help. This Heimdall method fixed me up and let me install the 4.3 OTA without a problem. (The ADB commands I mentioned in the previous post not only didn't work, but left me with a phone that wouldn't boot!) Next step is to figure out how to re-root...
Alan
carrot34 said:
OK! Thank you all for the help. This Heimdall method fixed me up and let me install the 4.3 OTA without a problem. (The ADB commands I mentioned in the previous post not only didn't work, but left me with a phone that wouldn't boot!) Next step is to figure out how to re-root...
Alan
Click to expand...
Click to collapse
This is basically what I followed to re-root after 4.3. Worked fine. You're just booting to CWM recovery temporarily to install the SuperSU update. Then it will revert back to stock recovery.
ack154 said:
This is basically what I followed to re-root after 4.3. Worked fine. You're just booting to CWM recovery temporarily to install the SuperSU update. Then it will revert back to stock recovery.
Click to expand...
Click to collapse
Thanks! Can you share the instructions you followed to do that?
Alan
carrot34 said:
Thanks! Can you share the instructions you followed to do that?
Alan
Click to expand...
Click to collapse
Crap, forgot the link. Sorry. Here you go:
http://forum.xda-developers.com/showthread.php?t=2365555
ack154 said:
Crap, forgot the link. Sorry. Here you go:
http://forum.xda-developers.com/showthread.php?t=2365555
Click to expand...
Click to collapse
Awesome!!! That worked great and very easily. Thank you so much!
Got the OTA for Lolllipop 5.0.2 today. Copied it from /cache/ before I started the update. Update info stated it would take around 15 minutes to complete, but in my case it took closer to 25 minutes. It stayed for a couple of minutes on the bootloader logo ("warning bootloader unlocked"), so don't freak out and just let it finish. I was on Kitkat stock, rooted and using Xposed. I uninstalled Xposed framework before applying the OTA.
OTA details
Name: Blur_Version.210.12.40.falcon_umts.EURetail.en.EU.zip
SHA-1: EDF73CD7B336D0A59F73108CB6CB9235AC765996
Download links:
Dropbox: removed
Wetransfer: http://we.tl/qVFwnL0EOz
Mega: https://mega.co.nz/#!E11inZwK!Rp88Jyj4cOX8glZQ2WoAdUtm06JR3Zp3VV7SiYQogz8
do you need to flash this from stock recovery?
Petrovski80 said:
Got the OTA for Lolllipop 5.0.2 today. Copied it from /cache/ before I started the update. Update info stated it would take around 15 minutes to complete, but in my case it took closer to 25 minutes. It stayed for a couple of minutes on the bootloader logo ("warning bootloader unlocked"), so don't freak out and just let if finish. I was on Kitkat stock, rooted and using Xposed. I uninstalled Xposed framework before applying the OTA.
OTA details
Name: Blur_Version.210.12.40.falcon_umts.EURetail.en.EU.zip
SHA-1: 1B2DFAC8481CD124BBE65236F086ECD153A334A8
Download link: https://www.dropbox.com/sh/vfuf21ak4sz4evb/AAB66yCNB40hFCpojH0oX76ia?dl=0
Click to expand...
Click to collapse
thank for you share .. if you want contribute there is a thread with the ota capture and the lollipop updates yet.. :highfive:
http://forum.xda-developers.com/moto-g/general/official-motorola-lollipop-update-news-t3001015
Do you use recovery to flash it or do you copy it to the root directory and search for an ota after that?
jperkovic said:
do you need to flash this from stock recovery?
Click to expand...
Click to collapse
kshyshiek said:
Do you use recovery to flash it or do you copy it to the root directory and search for an ota after that?
Click to expand...
Click to collapse
Put in SD.. And search update.
Thanks.
Petrovski80 said:
I was on Kitkat stock, rooted and using Xposed. I uninstalled Xposed framework before applying the OTA.
Click to expand...
Click to collapse
It didn't fail because root?
How do I flash this?
eddydc1 said:
It didn't fail because root?
Click to expand...
Click to collapse
Nope.
Sent from my XT1032 using Tapatalk
It has newer software version and Kernel. Can anyone tell if it's any different from Brazilian version?
Already download it 3 times and the SHA-1 don't mach the op.
In the 3x got the same EDF73CD7B336D0A59F73108CB6CB9235AC765996
Hello. I have a problem installing the ota: i downloaded the file, put in sd, it was found and started to install, turned off and started updating, then in about 1/3 of process an error occured and rebooted. No other info, just an "error" information. Anybody any ideas?
Soxy said:
Already download it 3 times and the SHA-1 don't mach the op.
In the 3x got the same EDF73CD7B336D0A59F73108CB6CB9235AC765996
Click to expand...
Click to collapse
I don't know if there's a typo in the first post or what, but that sum that you got matches the capture I posted earlier, so it must be the right one.
Hmm i have the zip on the sd but when i search updates it says that there isnt updates availables
xperia_pro said:
Hmm i have the zip on the sd but when i search updates it says that there isnt updates availables
Click to expand...
Click to collapse
same for me. And when I try to install it through recovery it says installation aborted.
Does anyone know what's the problem and how can I install this?
jperkovic said:
same for me. And when I try to install it through recovery it says installation aborted.
Does anyone know what's the problem and how can I install this? View attachment 3197986
Click to expand...
Click to collapse
The most common reasons for the error response are:
1. Not currently running EU 4.4.4 stock.
2. Rooted.
3. Custom recovery.
Someone feel free to correct me if I'm wrong.
flyjazz said:
The most common reasons for the error response are:
1. Not currently running EU 4.4.4 stock.
2. Rooted.
3. Custom recovery.
Someone feel free to correct me if I'm wrong.
Click to expand...
Click to collapse
I'm running this. It's a stock EU retail rom I think. My phone was never rooted, bootloader is locked and no custom recovery installed. Everything is stock.
Soxy said:
Already download it 3 times and the SHA-1 don't mach the op.
In the 3x got the same EDF73CD7B336D0A59F73108CB6CB9235AC765996
Click to expand...
Click to collapse
You are right. I've accidentally posted the hash of the wrong file. Corrected.
jperkovic said:
same for me. And when I try to install it through recovery it says installation aborted.
Does anyone know what's the problem and how can I install this? View attachment 3197986
Click to expand...
Click to collapse
Fingerprint errors are usually caused by not using the stock recovery. You need the recovery that's part of the stock ROM.
jperkovic said:
I'm running this. It's a stock EU retail rom I think. My phone was never rooted, bootloader is locked and no custom recovery installed. Everything is stock.
Click to expand...
Click to collapse
I noticed you have a ROM "EuRetailSL". I'm quite sure I upgraded from a Kitkat ROM without "SL" in the name.
From the official Chinese support forum.
Credit goes to counter-stike
/Support flash and update of official rom.
/Support MTP
/Support disabling offical recovery
/Supported Models: E100X (All regional model, Onyx or Ceramic)
Must unlock bootloader and install proper ADB driver before flash.
Now enjoy root and custom rom!
Download Link (English Version)
Resolved!
Here is the english version repacked by me
https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0
md5sum - 164519c4a50ea5e9c1244cd7aedf2c74
What is system image?
When I open the backup menu I get an option I've never seen before in other phones called "system image".
Could someone please explain to me what it contains? And is there a need to back this up?
How to flash ?
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Sherwinnn said:
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Click to expand...
Click to collapse
Simon posted a link with instructions here: http://forum.xda-developers.com/showpost.php?p=63718460&postcount=3
Savya said:
Beware! This Recovery is also in Chinese so its impossible to use for most of us. Maybe mention that too?
Click to expand...
Click to collapse
sorry for the inconvenience, updated the link to English version.
can someone dump system.img and boot.img?
Sherwinnn said:
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Click to expand...
Click to collapse
1. Taking threads off-topic is against forum rules. This thread is about TWRP recovery.
2. Double posting is against forum rules.
http://forum.xda-developers.com/oneplus-x/help/h2os-to-oxygenos-t3243838
Can someone confirm this as working?
Should i rather wait for official twrp?
I have had old phones quite a while now and being a bit causious because i usually don´t spend 300€ to a phone.
Fatsodonkey said:
Can someone confirm this as working?
Should i rather wait for official twrp?
I have had old phones quite a while now and being a bit causious because i usually don´t spend 300€ to a phone.
Click to expand...
Click to collapse
Take a look in the rooting thread.
Mirror links:
Original TWRP by @qwsdert4 -- MIRROR
English repacked by @ukanth -- MIRROR
ckret said:
can someone dump system.img and boot.img?
Click to expand...
Click to collapse
Found OTA (looks like full) from some tutorial which has boot.img and full system dump
http://pan.baidu.com/s/1hq98Uoc
hey, so i just flashed this TWRP recovery and i managed to boot into TWRP recovery. But, whenever i click the 'Reboot' option or 'Power Off' option, the TWRP just stays right there and it won't even reboot or power off. I have to hold down the power button to turn off the phone and power it back. Any ideas why this is happening and anything that i've done wrong in the process?
Sherwinnn said:
hey, so i just flashed this TWRP recovery and i managed to boot into TWRP recovery. But, whenever i click the 'Reboot' option or 'Power Off' option, the TWRP just stays right there and it won't even reboot or power off. I have to hold down the power button to turn off the phone and power it back. Any ideas why this is happening and anything that i've done wrong in the process?
Click to expand...
Click to collapse
Its a Bug, i guess same is happening with everyone. We just have to wait for official TWRP. and also
Bug Till NoW
Extra Option Named System partition Under Backup, Which has no Function and Doesn't Work.
Cant reboot/power off from recovery as it just freezes the recovery.
OTG doesn't work in Recovery.
TWRP gets replaced with Stock recovery after each Boot.
N_lover27 said:
Its a Bug, i guess same is happening with everyone. We just have to wait for official TWRP. and also
Bug Till NoW
Extra Option Named System partition Under Backup, Which has no Function and Doesn't Work.
Cant reboot/power off from recovery as it just freezes the recovery.
OTG doesn't work in Recovery.
TWRP gets replaced with Stock recovery after each Boot.
Click to expand...
Click to collapse
can you dump boot.img for me?
just make a backup with twrp if its working
this way we can build a working twrp version
ckret said:
can you dump boot.img for me?
just make a backup with twrp if its working
this way we can build a working twrp version
Click to expand...
Click to collapse
here u go
N_lover27 said:
here u go
Click to expand...
Click to collapse
thanks.
its weird though.. when i unpack the boot.img it misses some files...
ckret said:
thanks.
its weird though.. when i unpack the boot.img it misses some files...
Click to expand...
Click to collapse
try this one mate..
DISCLAIMER
I'm not responsible for any damage, bootloop, bricked or broken handsets.
Notice
The recovery can't be flashed to the handset with locked bootloader! Unlock it first!
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom and stock (with some remarks) ROMs to your device, repair broken file systems, and root your device.
Update 01.04.2016 (it is not a joke )
First stable release
Have fixed screen flickering and UI lagging
Update 29.03.2016
It's alive! First experimental working build published at internal 4pda Russian board.
Download
TWRP 3.0 M86 fastboot flashable image
TWRP 3.0 M86 flashable zip
Stock Recovery flashable zip
Unlocked BL flashable zip
Install
With BL unlocked reboot into fastboot mode and flash:
Code:
fastboot flash recovery TWRP_3.0_m86.img
Cautions
Before flashing stock rom with TWRP replace bootloader file with unlocked one inside rom archive!!!!
Another method is to flash unlocked BL and TWRP zips immediately after flashing stock rom (need testing)
JUST IN CASE this is an April fools.... I'll wait ?
Great mate, u've stolen my idea in the end, right ?!
Gooooood work, thank u very much ! Testing wip :highfive:
---------- Post added at 09:09 AM ---------- Previous post was at 09:04 AM ----------
Nein, first step doesn't work
Flashing unlocked BL through stock recovery, I get always the same result :
FIRMWARE CORRUPT
Click to expand...
Click to collapse
faust93 said:
Update 01.04.2016 (it is not a joke )
First stable release
Have fixed screen flickering and UI lagging
Click to expand...
Click to collapse
*Working fine
PYCON said:
Nein, first step doesn't work
Click to expand...
Click to collapse
Didn't we discuss it yesterday ? No official zip signature => not flashable with locked bootloader...
toms157 said:
Didn't we discuss it yesterday ? No official zip signature => not flashable with locked bootloader...
Click to expand...
Click to collapse
Ahahah yes yes but the purpose of BL_UNLOCKED.ZIP is to unlock bootloader. But in order to flash it correctly... we've to have the bootloader already unlocked
Damn it, it's really stupid, right ?
PYCON said:
Damn it, it's really stupid, right ?
Click to expand...
Click to collapse
Filename could lead to confusion, sure... It's needed for this :
Another method is to flash unlocked BL and TWRP zips immediately after flashing stock rom (need testing)"
Click to expand...
Click to collapse
Meanning flash 3 files from custom recovery without rebooting
Anyway this is not a catch-22, leaked beta from tutorial is the entry point
Will this work on a device that was originally the Chinese variant but changed to the international one after editing the proinfo file? I'm really eager to try this but I'd hate to jump in blindly and brick...
showofdeth said:
Will this work on a device that was originally the Chinese variant but changed to the international one after editing the proinfo file? I'm really eager to try this but I'd hate to jump in blindly and brick...
Click to expand...
Click to collapse
ID is only checked while using stock recovery .... Anyway it's safe, i'm in the same case and worked
naboleo said:
ID is only checked while using stock recovery .... Anyway it's safe, i'm in the same case and worked
Click to expand...
Click to collapse
Oh man that's great to hear! Thanks. Bought myself a laptop specifically to get my PRO 5 all TWRP'd up.
One last thing. I have updated firmwares many times in the last couple of months with full factory wipes each time, currently on the latest test version. Will the bootloader unlock in the tutorial still work? Meizu can't have patched anything. Right?
showofdeth said:
One last thing. I have updated firmwares many times in the last couple of months with full factory wipes each time, currently on the latest test version. Will the bootloader unlock in the tutorial still work? Meizu can't have patched anything. Right?
Click to expand...
Click to collapse
Never had troubles to downgrade to leaked beta
naboleo said:
Never had troubles to downgrade to leaked beta
Click to expand...
Click to collapse
Brilliant. Thanks a lot. Can't wait to hear people's experiences with this.
mate problem solved..now finally i can go into twrp it's fantastic but there is a problem...when i try to put a update.zip (nodified with unlock bootloader) the pc give me an error: impossible transfer file and the phone reboot
That TWRP works perfectly for me, backup nandroid, restore it, flash ZIP rom and ZIP other ( Xposed, etc ), no problem at all :highfive:
Good job !!! Great, thx !!!
Thank you so much for this!!! could i ask you how you managed to create a recovery for the pro5?
Solitario88 said:
mate problem solved..now finally i can go into twrp it's fantastic but there is a problem...when i try to put a update.zip (nodified with unlock bootloader) the pc give me an error: impossible transfer file and the phone reboot
Click to expand...
Click to collapse
I assume youare still on 5.6.1.19: Thats an error with this version.... put the updatefile manually (in the PC) on the external sd and flash via TWRP... you should later update your modified Pro 5 to 5.1.3.0, the error ist gone then...
Solitario88 said:
mate problem solved..now finally i can go into twrp it's fantastic but there is a problem...when i try to put a update.zip (nodified with unlock bootloader) the pc give me an error: impossible transfer file and the phone reboot
Click to expand...
Click to collapse
Copy UPDATE.ZIP from PC to phone BUT CONNECTING THE PHONE WHEN IT'S OPENED TWRP
MTP mode works great, even u'r on 5.6.1.19 :highfive:
Sometimes... Rarely... A strange thing happens :
I go to INSTALL in order to flash a ZIP of something but... NO MEMORY SEEMS TO BE ACCESSIBLE
If I reboot another time into recovery, all my memory contents is perfect and visible... :silly: Really strange !!!
PYCON said:
Sometimes... Rarely... A strange thing happens :
I go to INSTALL in order to flash a ZIP of something but... NO MEMORY SEEMS TO BE ACCESSIBLE
If I reboot another time into recovery, all my memory contents is perfect and visible... :silly: Really strange !!!
Click to expand...
Click to collapse
Have you installed the updated TWRP (20-04-16) : http://xep.8800.org/pro5/
I tried the old (30-03-16), and I noticed some bugs, like flash screen when touching the screen buttons...
Maybe I helped you :laugh:
cedric3 said:
Have you installed the updated TWRP (20-04-16) : http://xep.8800.org/pro5/
I tried the old (30-03-16), and I noticed some bugs, like flash screen when touching the screen buttons...
Maybe I helped you :laugh:
Click to expand...
Click to collapse
Uh I didn't know that a new version was released... Maybe, I could be. I download it again and try... Thx man ! :highfive:
The last version can't read the micro sd.
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
EDIT : UPDATE : bootloader -> start -> works!!
But now everytime it reboots it goes to recovery.
It shouldn't be a problem now since i can boot to android but if there is a way to switch default 'boot to recovery' to 'boot to android' i would be very glad to know.
Illiax said:
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
Click to expand...
Click to collapse
Can you boot to bootloader and select start?
strongst said:
Can you boot to bootloader and select start?
Click to expand...
Click to collapse
Yes! that do works. Thank you for this workaround, see updated post pls
Illiax said:
Yes! that do works. Thank you for this workaround, see updated post pls
Click to expand...
Click to collapse
Please wipe cache and art/dalvik in twrp.
Illiax said:
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
EDIT : UPDATE : bootloader -> start -> works!!
But now everytime it reboots it goes to recovery.
It shouldn't be a problem now since i can boot to android but if there is a way to switch default 'boot to recovery' to 'boot to android' i would be very glad to know.
Click to expand...
Click to collapse
Try this link
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Be sure to turn on debugging and oem unlock mode
Hi
How to fix this problem?...I can't find the fix in the link you mentioned above..
Thanks in advance
Innayath Innuz said:
How to fix this problem?...I can't find the fix in the link you mentioned above..
Thanks in advance
Click to expand...
Click to collapse
You have to flash the stock rom again, no any other fix to it
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
You have to flash the stock rom again, no any other fix to it
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Wrong!
pastorbob62 said:
Wrong!
Click to expand...
Click to collapse
What do I do
Innayath Innuz said:
What do I do
Click to expand...
Click to collapse
This question asked many tines and has same reply,
Read this post: https://forum.xda-developers.com/moto-g4-plus/help/bootloop-to-recovery-update-t3787623