Related
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Read the tuts in the dev forum. P.S. no custom roms yet but there is root.
TrevvyD said:
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Click to expand...
Click to collapse
Try hold down "back button" without battery then insert USB cable and then insert battery.
When it says to hit enter, that is to continue from the screen (on the PC) that says "press any key to continue" when you are doing the steps for rooting. If you don't have that window ready the phone will only stay in flash mode for about 5 seconds and then it will continue to boot. So, just make sure you are ready with the PC before entering flash mode.
Dr_Wolodya said:
Try hold down "back button" without battery then insert USB cable and then insert battery.
Click to expand...
Click to collapse
thanks!!
this really helps!
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
johnmin said:
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
Click to expand...
Click to collapse
check drivers (install SE PC suite and let it atleast detect the phone once in FLASH mode)...
also it might help to disable any antivirus (worked for me)
cannot enter the flash mode
Hi,
I know this post is pretty old, but still I'm struglig the second day now to get into flash mode and still no luck despite trying every method there is on the web.
I've got Xperia X10i mini pro, reinstalled standard ROM with PC companion just to make sure it's nothing with the software or any modifications I made to it.
I'm guiding myself with instruction given here:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
in order to get my bootloader unlocked
what I've done so far:
-installed Android SDK incl. SDK Tools, SDK Platform-tools, Google USB driver package. Not installed any API from SDK.
-put android_winusb.inf (18 KB size) in C:\android-sdk-windows\extras\google\usb_driver
-in general- everyting given here: wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK#Windows
command
Code:
adb devices
rerurns
Code:
List of devices attached
43423531315537465737 device
in my opinion meaning it works as it should.
So I turn the phone off, unplug the cable both from computer and the phone, take the abttery out, plug both end of USB cable where these should be, hold the Back button (tried with Volume up too) and put the battery in.
The result is it only goes into flash mode for several seconds (confirmed by SuperOneClisk log) and then goes into charging mode. nothing gets displayed on the screen. Only when PC Companion is on it detects it, than looses it and pops up with a window on how to properly connect the device... :/
So can someone please tell me what I do wrong?
Why it doesn't stay in flash mode?
PS. when I enter *#*#7378423#*#* to access the service menu, after pressing the last * the numbers just disappear and nothing happens...
Pls help
Edit:
I somehow got around that with s1tool and Flashtool. But eventually I could not go along the way given at cyanogenmod.com and unlocked with the help of this: http://forum.xda-developers.com/showthread.php?t=1254225
Hi!
I've just got my gt540 .
I decided to install CM7[swift-droid] but fastboot or recovery was needed, so I downloaded rom with fastbood [.kdz] , installed all drivers and started update with kdz updater .
[phone was 2.1 already]
Installation stopped on 140 [booted to download mode]
I disconnected phone ...
And now it is not able to boot .
I tried VOL- + USB - nothing happen
I tried Hard-reset - same
KDZ Updater cant find my phone,
I can't even hear the "BUMP" sound when I connect the divice via USB .
Simply phone is fully dead .
Is there possiblity to make my gt540 working again ? //no warranty ;/
[HOW-TO] Repair your device if it feels like dead | When you click power button nothing happens (Note that this may or may not work)
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY.
Load KDZ(ROM) and flash your phone.
If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
In TYPE dropdown menu, choose CS_EMERGENCY.
Load KDZ(ROM) and flash your phone.
____________________________________________
THANKS TO fishears FROM XDA!
[HOW-TO] Repair your device if you don't see LG logo, boot animation | Recovery doesn't show up
Download the French v20A and the out.kdz
Take out your battery, SIM and SD card
Plug USB into PC (but not phone yet)
Hold (VOL DOWN) button and plug USB into phone | *Phone goes into Download Mode
Run KDZ Updater
In TYPE dropdown menu, choose CS_Emergency mode
Load French V20A ROM and flash it
When it's finished pull out USB again and hold (VOL DOWN) and reinsert USB to put phone back in Download Mode
Launch KDZ Updater (still in CS_Emergency mode)
Load out.kdz and flash it
You should now have your boot animations back and you can flash whatever ROM you want to use.
taken form the great guide from here
http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
Thanks but my phone is not able to go into Download mode and KDZ Upadter says "Phone not found" when I use "cs_emergency" .
Any other ideas ?
I think that repairing boot with jtag is inevitable
You have to send it to LG. Basically, they will replace the motherboard
post to delete
@up not so fast others with this prob might see this thread and fix their phone this way
Hmm, as I said warranty has ended .
I found auction where I can repair this for 20USD, probably I will try ... ;/
hmm connect to pc and try to power the phone with Power + Camera (2 clicks) for 30 seconds or more. (no matter if no logo appears)
then try to flash with kdz
I have some problem what to do!?
bs828 said:
@up not so fast others with this prob might see this thread and fix their phone this way
Click to expand...
Click to collapse
Well I just repetead a part of what you posted because I didnt read entirely your post. Doubt that anyone will find that helpful.
hi guys.. could you help me with my problem.!
I have an LG GT540 android 1.6 firmware version(stock)
So here are my problems:
1. I tried to upgrade it from 1.6 to 2.1 using this tutorial http://forum.xda-developers.com/show...27&postcount=3 thanks to lavero.burgos for posting it, I was successful at first part, but I cant follow the next because my device wont go to fast boot,, I tried putting it off, then camera+poweron but it doesnt do anything. It doesn't light, no lg logo appears, just nothing although the computer can read the drive when I connect it through usb. So I cannot flash it to 2.3,2.3 because it just wont go to fastboot.
2. When I turn it on normally, It takes long before it response like after 30sec to light, but just light, no lg logo appears although it wasnt bricked because I can use it normally after just waiting to on.(annoying)
3. Since I upgraded it to 2.1, I lost all 3rd party application and the internal apps were the only left, so I copied all my saved apps (.apk) to my sd card but the problem is there is no saved app on my phone to read and install those apps from my sd card.(irritating)
4. My device wont read my sim card, when I start it it says "sim card unprovisioned" so basically I cant connect to mobile networks here in the philippines(im using globe telecom). I feel that Im stucked in the middle of nowhere since I cannot contact and txt all my family and friends.
5. I cant connect to wifi,, when my device detects wi-fi, I try to connect to it but from the log it only try to connect but doesn't obtain the ip address. Even when the wi-fi signal is strong, it does the same thing.
So please help me guys,,I want to hear from my fellow xda-developers badly,,,
PS. also those who have problems with their LG GT540 pls feel free to post and share it with us here... thank you all guys in advance....
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Step one!
1.turn off phone.
2.hold the POWER button till you feel the beep.
3.let go of the POWER button when you feel the beep and hold onto the CAMERA button only.
4.hopefully it turns on to a blackscreen and nothing else(fastboot)
5.unzip this CLICK ME!! to desktop and open the flash all no wipe file
or......
1.turn on your phone.
2.go to settings>applications>development>tick the usb debugging
3.connect phone to computer (make sure phone is on)
4.unzip this CLICK ME!! to desktop and open the flash all no wipe file
5. phone should boot into blackscreen like the one above......
Click to expand...
Click to collapse
Step 2!
both should flash a recovery image. Next
1.make sure the phone is off
2.press POWER button
3.when you feel the beep let go of POWER button and press the HOME button only.
4.phone should boot into recovery mode.
5.take out battery again
6. download a rom into the sdcard using computer
7.go to recovery again using the steps above (steps 1 to 4)
8.select wipe all data factory reset or something like that....
9.install zip from sdcard
10.select from sdcard
11.choose the file you downloaded
12.finish flash and reboot phone.
Click to expand...
Click to collapse
excellent guide! big thanx
bs828 said:
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Click to expand...
Click to collapse
Thanks,, Ive tried the 2nd option on step one and i think my phone successfully got to fastboot(just clean blank screen) so the cmd automatically run and states
C:\Desktop\adb rebootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: protocol fault <no status>
C:\Desktop\fastboot flash recovery recovery.img
< waiting for device >
Did I miss something???
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
bs828 said:
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
Click to expand...
Click to collapse
yeah I installed the drivers...
hmmm maybe there are no fastboot drivers(main suspect....) there are a few ways to get it but for mine i just plug my phone in to my pc (windows 7 64bit) it just recognize it and tries to get the "google fastboot interface" drivers from windows update...
Try Volume Up+Search Key+Power to go into Fast boot Mode, There's different keys to activate Fastboot Mode (There is different versions of Fastboot)
Sent from my LG GT540 CM9 PreRC Polish Blood using xda premium
Your phone is/was bricked
Hey, I'm sorry to bing back such an old thread, but I just wanted to say this for posterity: your phone has/had a soft-brick. This means: you can't see Android nor LG boot logos, can't enter Recovery and (maybe) can't access Fastboot, but I'm not too sure on that last one. Besides that, the phone works "okay", but you should try to fix it.
Basically this soft-brick is almost always caught when upgrading from 1.6 to 2.1, so everyone should have it, including me. It took me a whole year to realize how to friggin' fix it lol, but here goes what I did:
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
------------------------------------------------------------------------------------------
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
--------------------------------------------------------------------------------------
Also, if you look in here you'll find how to flash an awesome ROM, Cyanogen Mod 10 (should say "Final Version#2).
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Schubi_1 said:
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Click to expand...
Click to collapse
Don't be desperate
You installed the baseband of aidasaidas75. I don't know why he made this new baseband, but several people have passed or are going through this situation you are going through right now. Download this file which contains a tutorial that I did (with videos) and follow in the order. Here is the link to download: http://www.mediafire.com/download/puibfc3chbrw2zs/tutorial.rar
Phone was not found!
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Schubi_1 said:
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Click to expand...
Click to collapse
Edit: Have you putted the phone in emergency mode?
iTzMeB1tch3s said:
Edit: Have you putted the phone in emergency mode?
Click to expand...
Click to collapse
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Schubi_1 said:
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Click to expand...
Click to collapse
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
iTzMeB1tch3s said:
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
Click to expand...
Click to collapse
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Schubi_1 said:
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Click to expand...
Click to collapse
you have to leave the screen like this:
View attachment 3716606
If you get put in this way, just connect to your PC and have them install the Stock ROM.
Now, if you could not leave it, try other key combinations to try to enter download mode.
do not give up!!!