Database Users

Replacement touch screen

I have couple of scratches on my touch pro screen.when the device is on the scratches are like rainbow colors really visible.If I change the touch screen (not the whole lcd screen) that will fix my problem right? Did any1 do this?

ummm i think when u meant by "rainbow colors" then ure gonna have to replace the WHOLE LCD screen, cuz more than likely its from the LCD screen, and i dont think the touch screen and LCD screen are 2 parts...i think theyre just one...not sure, but try to look on ebay OR idk if u have warranty on it u can probably call in HTC about it...

This is what I think will fix the scratches
Code:
[CODE]http://mobile1.brando.com.hk/prod_detail.php?prod_id=03976&dept_id=088&cat_id=0695
Code:

Much cheaper
For Digitizer Module for T-Mobile MDA Vario IV Touch Diamond
http://www.dealextreme.com/details.dx/sku.20648
For HTC Diamond
http://www.dealextreme.com/details.dx/sku.20647
I don't know if it fit the same as Touch Pro or Fuze, but read the spec

I have difficult time finding a How to replace digitizer video.
Any help?
Thanks

radoste said:
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
Click to expand...
Click to collapse
Maybe this can help.Its a How to remove cameras from touch pro with pictures
Code:
http://www.mediafire.com/file/h2mmwetxnij/HTC%20Touch%20Pro%20-%20Camera%20removal%20photo%20guide%20v1.1%20by%20A%20Mak.pdf

I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?

radoste said:
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
Click to expand...
Click to collapse
I wouldnt, thats just the only touch pro take apart that I found with pictures

mikechannon.net is a good place to start. But if you are looking to replace the digitizer only, you won't find it there. It's a bad move anyway. I tried that, cracked my lcd and end-up buying the whole lcd like this.
All I can tell you are my mistakes.... lol....
- never peel of the digitizer. it will ruin it.
- never try to remove the lcd with cutter blade. this is how i cracked it (stupid me and still regret it)
- between the lcd and the digitizer there is a thick, clear double tape like glue. i came across some information about this somewhere (forget where...). one said you should heat the glue first (don't know how to apply this without affecting the lcd) . other one said have to use dental floss.
So, there you go.

HTC Touch Pro- LCD & Digitizer replacement instuctions
Hi everyone. I have SCOURGED the internet looking for some kind of decent instructions to replace the LCD & Digitizer screen on my HTC Touch Pro (Sprint) phone with the new set I purchased from Hong Kong. Mike Shannon's site does NOT give directions for this specific area.
I have seen you all talking about needing to do the same thing and wonder if anyone has done it? And do you have any directions to help me?
I've had this part for a month now, and can't find any directions to do it! My dog chewed it, and the touch works, but the screen is half black now. I read it is easier/less risky to replace both lcd and digitizer, which I went ahead and purchased them both with the tools, now I just need to find something decent (instructions) to have help replacing it.
thanks to anyone who can step up to help me, I'm frustrated beyond all comprehension, and now feel I may as well ditch the phone if I can't find a way to replace it. Or maybe you know someone I could send it off to? Everyone wants to charge a couple hundred bucks sending it in to them!

to the appling heat ...u can try putting it in a ziploc bag and boiling it ...and for the instructions this is the best i can do for u http://store.payloadz.com/str-asp-i...nance_Manual_eBooks_Technical-end-detail.html
im pretty sure after all ur fustration 8 dollars wont kill u ...and im pretty sure the condensation from the boiling wont hurt
and i found a free one hope it helps http://www.htcdriver.com/index.php?page=htc-raphael

it's a long trip, in russian, to get to the lcd
http://www.pdacenter.ru/razborka/htc-touch-pro/
You can use Google translate on it. It seems that the hardest component to get to is the lcd. I also bought the digitizer, since my lcd is fine. I'll post a follow-up if I go for it.

Any luck getting the touch screen off and new one on?
I bought a touch screen and digitizer as separate items. I wish I had known that some kind of clear adhesive is supposed to be between them.
A) What happens if you don't use this adhesive?
B) Has anyone successfully replaced the screen/digitizer with replacements on the fuze or touch pro?

Anyone having luck?
Has anyone actually figured out how to install this? I just got what was supposed to be a replacement LCD+digitizer. they shipped the pieces seperate, so I can't understand how to put them together, since HTC seems to only list the part as one piece and there are no instructions or videos anywhere that indicate how to install them as seperate pieces, or get them to connect.

Dont do it!!
Ok, I just recently bought a parts phone on here (a Fuze) and was "just going to replace the digitizer" (Authors laughs, then cries at statement)
Ok, yes you can replace the digitizer without replacing the screen, BUT they tell you to use an oven (you can buy one from HTC they make it available to their techs, so you need someone that can get that for you). If you do not make sure that ALL of the glue is loose prior to taking the digitizer off you will split the LCD.
It is much simpler to get either a parts phone or a screen and digitizer and replace the part. I had to replace my digitizer as the touch function did not work. You can find older project phones in the market section. If you figure the cost of a parts phone (plus you have extra parts if anything else goes out) vs. if you buy a digitizer, then rip a part of the LCD because all of the glue was not disolved, and have to buy either a parts phone or a new phone anyway you will be way ahead of the game.
There are a number of good resources on here as to how to disassemble and reassemble the fuze.
I WOULD NOT RECOMMEND TRYING TO REPLACE THE DIGITIZER ALONE IF YOU HAVE NOT BEEN TRAINED OR HAVE THE PROPER EQUIPMENT - unless you need a reason to sell your spouse on why you need a new phone. "Honey, I tried my hardest to fix it, but I guess it is really broke now, I'm gonna have to get an HD2"
If you have any questions about the process let me know I am always more than happy to help.

http://www.mikechannon.net/PDF%20Manuals/HTC%20Raphael_SM_A10%20_GENERIC__01%20Dec%20
pkwhisker said:
Mike Shannon's site does NOT give directions for this specific area.
Click to expand...
Click to collapse
Yes, indeed, mike channon does offer a very detailed service manual for the raphael.

Replacing the display on the HTC Touch Pro (Raphael): Some Tips
Replacing the display on the HTC Touch Pro
How To - Tips
1. Collect information
a. Find the Service Manual HTC Touch Pro (Raphael) on Mike Channons's site, the Raphael wiki or you could Google for it. File name is "HTC Raphael_SM_A10 _GENERIC__01 Dec 08.pdf".
Take a look at the disassembly and assembly chapters of the Service Manual.
The following two lists may be helpful.
---
List 1: types and quantities of screws
[SPL no., P/N, pages of Service Manual, description, quantity used in Raphael]
10. 72H01893-00M (see p. 34), black (middle length), 2x
11. 72H02450-00M (see p. 32, 34, 30), black (shortest type), 7x
12. 72H02474-00M (p. 37), black (longest type), 4x
13. 72H02689-00M (p. 30), metal, 4x
26. 72H02865-00M (p. 35), metal, 6x
27. 72H02886-00M (p. 35), 1x torque screw for M/B, 1x
---
List 2: kinds of tape/fabric used in the Raphael
a. Conductive fabric
Self adhesive conductive fabric, parts 14-24 on the SPL. The adhesive backside is also conductive.
b. Mylar
A specific kind of polyethylenetereftalaat (PET) used for electical insulation.
c. Kapton tape
Kapton is a polyimide film which can remain stable in a wide range of temperatures. (electrical insulation)
d. EMI gasket
EMI shields are implemented in a design to isolate one component or section of a device from another.
e. Double sided tape
---
b. Movies of the disassembly process can be found on YouTube for the HTC Diamond.
The Diamond does not have an integrated keyboard, so it is a bit different, but it is good enough to get an idea of the process.
The information on how to replace the screen itself is not found in the service manual.
c. Study the last few stages of the HTC Touch Pro page on pdacenter.ru
(Translate the page into English using Google.)
The display is attached to the metal frame by 4 small pieces of double sided tape.
3. Get some tools
a. Phillips (cross head) screwdriver size 00x50
The right size is 00. The length, 50mm, is less important.
There is one torque screw in the Raphael (SPL no. 27), but it can easily be handled by a normal screwdriver.
b. Plastic stick (to open the case)
The standard plastic stick I had ordered was actually too big. The one I made myself was smaller and proved to be better.
c. Other tools
I did not use these, but if you plan to do more than one it would be a good idea to use the
- plastic tweezers
- ESD wrist wrap
- rubber gloves
4. Buy a display with touch screen attached to it
You could buy the touch screen and the display separately, but I could not find any information on putting them together. Avoid problems by buying these already attached.
5. Replace the display
a. Disassemble following the Service Manual, leaving the M/B unit in order.
Be careful not to break the small speaker cords. Do not move them too much because they are very fragile.
Be sure to keep every piece of tape safe for reassembly. Buying new tape can be quite expensive.
b. For the last stages, follow the instructions from pdacenter.ru.
Press the old display gently out of the metal frame. Move the pieces of double sided tape from the old to the new display, and fit the new one into the metal frame.
c. Reassemble following the Service Manual.
Good luck!

What will fit what?
Will the lcd and digitizer from a sprint version work on an alltel version(ppc-6850)? Or is there another lcd and digitizer that i can use? Im back to the old berry 8703 and its killing me.

spammer said:
if you just find scratches on the surface, then you just need to change the touch screen digitizer. the soldering is requested when you fit it.
But of course, if you buy the one that lcd and touch screen fit together one, then no soldering request.
Anyway, soldering is not such difficult if you has the tool.
thanks
Click to expand...
Click to collapse
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.

ingmardb said:
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
Click to expand...
Click to collapse
you can look at the connect flex cable part of your touch screen and the lcd, you will find they are soldered together. Of course , if you don't soldering it together, it will also work, but not as good as after soldering.

[GUIDE] Xperia Arc Disassembly

EDIT
"meyourchum" has provded a link to get offical disassembly instruction with lot more information.
Check it for yourself
Hello folks,
I had a chance to work on my friends arc who bought a Rogers version and dropped it. He had it totally mess on the case and needed the full housing replacement.
I hope that doesn't happen to anyone. I didn't take any photos but I am trying to explain everything as it was to help anyone with this.
General Note:
- Anywhere you got stuck, watch some X10 Disassembly video
- Be very gentle to your phone in this process
- Besides all the screws the rest of the phone is put together with glue(Sticky Back) and snap(plastic for main board)
- Using this information on your own risk as I don't take any responsibility if anything happens to your phone.
Instruction
1) Remove the back battery cover. Thats the easiest part
2) Need star shaped screw driver[Trox](I bought the set for $5) there are 4 screws like that and two which opens with phillips screwdriver(tiny) This is what I bought
All the above we all have seen them
3) After removing the 6 screws remove the front fascia of the phone with a guitar picks, something skinny but sturdy*
* I recommend not using anything other than rubber or plastic in the whole process.
4) Main board is snapped in with plastic to the body which easily can be opened.
5) Little board on the bottom is glued(sticky back @ top) which you can remove with pulling little hard but make sure you don't break it.
6) Majority of the wire you see connected to mainboard can be discounted (snap in wires)
7) Removing the screen: from outside of the phone (like you are looking directly to screen like you normally do) you need to put something under neat and raise up the screen. This part has glue as well and its hard to lift but I did it and it should be possible.
8) if you are doing a full housing replacement, then there are stuff here and there that you need to remove and re-use it on the new housing(Like 3.5 mm jack, HDMI lid, etc.)
Good Luck and let me know if you have any questions.

1st time... ehm.. taking the Arc apart, that is!
Helluw there
Just read your post, and thought I wanted to share with you, that I might be opening one of these slick little things. My friend broke his display, and the ISP is talking about some 'off the scale' repair prizes.
...So, he asked me to do the job
Told him I didn't have any experience on the disassembling of this phonetype, but he trusts me it seems
I might return with some questions in case of problems, is that OK with you Nimche?
Greetingz

Hope u have the courage to make a video next time
Sent from my Arc using XDA premium App

xelion said:
Helluw there
Just read your post, and thought I wanted to share with you, that I might be opening one of these slick little things. My friend broke his display, and the ISP is talking about some 'off the scale' repair prizes.
...So, he asked me to do the job
Told him I didn't have any experience on the disassembling of this phonetype, but he trusts me it seems
I might return with some questions in case of problems, is that OK with you Nimche?
Greetingz
Click to expand...
Click to collapse
Sure, no problem. I would be more than happy to answer. Lets see just some general stuff...
Note: anywhere you got stuck, watch some X10 Disassembly video
Note: be very gentle to your phone in this process
- you remove the back battery cover. Thats the easiest part
- you need that star shaped screw driver(I bought the set for $5) there are 4 screws like that and two which opens with phillips screwdriver(tiny)
All the above we all have seen them
after removing the 6 screws
note: besides all the screws the rest of the phone is put together with glue and snap(plastic for main board)
- remove the front fascia of the phone with a guitar picks, something skinny but sturdy*
* I recommend not using anything other than rubber or plastic in the whole process.
- main board is snapped in with plastic to the body which easily can be opened. I change full housing and not sure if you have to remove the hard key button from the bottom end of the phone too or not but that little board on the bottom is glue which you can remove with pulling little hard but make sure you don't break it.
- All the wire you see connected to mainboard can be discounted (snap in wires)
- There is a big one which goes to the screen you have to dis-attach that before removing the screen
- Removing the screen: from outside of the phone (like you are looking directly to screen like you normally do) you need to put something under neat and raise up the screen. This part has glue as well and its hard to lift but I did it and it should be possible.
Good Luck and let me know if you have any questions.

Can you answer this??? It get's hot here (and also in the same spot on the front.. so what's inside at this point??

CPU is right behind the second cover. I wish I could take some photos.

Nimche said:
CPU is right behind the second cover. I wish I could take some photos.
Click to expand...
Click to collapse
Thanks for the clarification. I was also suspecting since this area gets damn hot when playing games and even at charging (sometimes).
So seems like they move the CPU from behind the battery in X10 to near to the camera in Arc .

Can I change only the front faceplate around the screen without removing the mainboard? How easy would that be? I want to change mine to Misty Silver as Rogers only carry the Midnight Blue.
Also, for glued parts, do I have to glue them back on the new housing?

hellocng said:
Can I change only the front faceplate around the screen without removing the mainboard? How easy would that be? I want to change mine to Misty Silver as Rogers only carry the Midnight Blue.
Also, for glued parts, do I have to glue them back on the new housing?
Click to expand...
Click to collapse
Glue part, they are more sticky than glued. You just simply stick it back where it was.
Where is the silver face you found?
This is retarded from them...
Digitizer and screen(one part) are sticked to the front face. In order to for your to change the faceplate only(front) you may have to go through the whole process because the wires from digitizer are going through a big hole to the main board. You don't want to mess around with $700 or $800.
Inside, everything is small. really small. I thought I totally screwed up the whole thing. Technology has gone forward alot since I was a kid putting radio together.
Good Luck

prathaban said:
Thanks for the clarification. I was also suspecting since this area gets damn hot when playing games and even at charging (sometimes).
So seems like they move the CPU from behind the battery in X10 to near to the camera in Arc .
Click to expand...
Click to collapse
Yes, there are two board one above battery and one below batter @ bottom of the phone
On top is the main board
on bottom is the board for hard keys.
Nicely put together but they could have done a better job there....

Are there three parts to the housing? I assume there is the front plate, middle housing with the chrome, and the battery cover. The mainboard should be in the middle with the chrome. So I can't just detach the screen front the front plate? What is holding the three pieces of housing together? The six screws?
There are silver housings on eBay from time to time. Though, blue is a lot more common.

Three pieces. Back battery cover which is nothing.
Then there are two main pieces.
Chrome which is more like a holder of the fascia.
If I remember correctly, the front Fascia is the one holding all the board on it including that metal look piece(aluminum probably)
I will take photos and upload here...

Uploaded photos to the first post...

Hey, I'm looking to replace the chrome piece which has a few nasty chips in it, after removing the second back cover, how easy is it to take off that chrome piece?

Great post

How can I replace digitizer? I dropped my phone and the glass cracked

anyone know where i can get the tiny screw driver? I cant seem to find the correct one. they are either too small or too big.

how easy is it to replace the front cover, ive cracked the top of it and chipped a bit out the side (surrounding the screen) i presume it'd be simple enough. And does anyone know where i can get a good quality/genuine front cover replacement?

soldiers33 said:
anyone know where i can get the tiny screw driver? I cant seem to find the correct one. they are either too small or too big.
Click to expand...
Click to collapse
Sorry, you could have sent a private message.
I bought the screw driver here at local tool shop. Home Depot sells them.
Its called Trox Screw Driver and I bought exactly this one http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=100087664&langId=-1&catalogId=10053&ci_sku=100087664&ci_kw={keyword}&cm_mmc=shopping-_-googleads-_-pla-_-100087664&ci_gpa=pla&locStoreNum=618
I don't have the packaging but they should be standard.
Good Luck

mps83 said:
how easy is it to replace the front cover, ive cracked the top of it and chipped a bit out the side (surrounding the screen) i presume it'd be simple enough. And does anyone know where i can get a good quality/genuine front cover replacement?
Click to expand...
Click to collapse
You can find the whole housing between $30 to $40 but the front cover is that actual main piece that holds all the internal components + the screen.
If the crack doesn't bug you much, I would not do it since you have to replace the sticker behind you battery as well, which is not easy to peel off + you have to take the screen off the old front fascia which is glued and kind of hard to take off.
Downside of the whole thing for me was the sticker. I have to find an alternative for this problem.

Repair HD2, now trouble assembling?

I recently tried repairing a friends HD2, because he had a smashed screen.
I bought the new screen and some 2mm double sided tape. Took the phone apart, and managed to see the lcd was damaged also. Bought one of those then taped the new screen and lcd together using the tape.
The inner chassis had all the old tape on it still, so I bought a new inner chassis. Waited for it, then stuck the new lcd / digitizer to it. The button end didnt seem to stick down that well - even with the new chassis, with the buttons wanting to drop out, and them not sitting out of the screen like they should.
I thought it must be due to the phone only partially assembled, so went ahead and installed the rest of the phone.
Now its together the button end of the phone wont sit in the shell properly and the buttons seem to be lower than they should...
How am i supposed to get this inner chassis to stick properly, and are there any tips or vids to show how its supposed to sit?
thanks.

maybe this video can help you with assembling your phone.
Search on youtube for t8Q7mXdcJ54.

Ive watched that video numerous times, and its a little misleading as to how much is required. Extra tape in places that had to be cut and removed, labels not sticking back down like they do in the video etc.
Im after information as to how people stuck the lcd/digitizer to the inner chassis. I used a new inner chassis with tape pre applied, and it still didnt seem to stick the two things together enough. When you stick the chassis (with lcd/digitizer) into the outer case, it doesnt sit into the case enough, and the buttons are not sitting right.

If u have purchased lcd with digitizer,u could look for flat cable that connects from lcd to mbo,maybe u need to form it.buttons have points to allign,but u need to center both sides in micrometer to function normal.lcd/digitizer frame must have black tape on edges.
Sent from my Milestone using Tapatalk

kew1701 said:
If u have purchased lcd with digitizer,u could look for flat cable that connects from lcd to mbo,maybe u need to form it.
Click to expand...
Click to collapse
Please explain? Not sure what u mean by "form it"
buttons have points to allign,but u need to center both sides in micrometer to function normal.lcd/digitizer frame must have black tape on edges.
Click to expand...
Click to collapse
done this and still no luck

I have the same problem like foney!
See this:
argh, i can't post my photos! how to do it now, i don't have 8 posts yet!
I've used "3M 300LSE" as a profesional doublesided tape i thought and also put a 2mm stripe below the keyboard, but the display is not really fixed onto the chassi around the keyboard and the keys also can't be used really, because they are maybe not correct centered onto the keyboard circuit board. i've been using the assembly video from htc, but there it's not mentionend very well, how to do it right.

foney said:
Please explain? Not sure what u mean by "form it"
Maybe it need curved angle to 100% fit
done this and still no luck
Click to expand...
Click to collapse
Hmm,last thing i can think is that lcd/digitizer is not properly glued/taped.Did u put pressure for few hours on lcd/digitizer and middle frame?

it is taped on around the lcd using 2mm 3M double sided tape. The chassis i bought new, with tape included. When you stick the lcd/digi to the chassis, it appears that the button end, as l0rdius mentioned, isnt stuck down enough.
The video has the guy "magically" sticking it all together and all going together as it should, but doesnt show any real detail, like showing how things go together to fit properly.
edit/ pulled the phone apart again, and its definitely a case of the tape on the chassis near the buttons not sticking correctly. Ive wrapped it in rubber bands, and used some wooden clothes pegs to try to secure the two better. If it doesnt stick, then I may have to use something stronger than tape, like Tarzans Grip

I've found another thread, in which "profahmad" posted some hints:
http://forum.xda-developers.com/showthread.php?t=640328&page=8
Today i've ordered some more 3M 300LSE and want to take a new try on weekend with these hints. Hope i get the display better glued to the chassis and the buttons correctly justified.
Whats about the sticker under the battery. do you guys have problems reassembling it again and again? Or how do you handle it?

l0rdius said:
I've found another thread, in which "profahmad" posted some hints:
http://forum.xda-developers.com/showthread.php?t=640328&page=8
Whats about the sticker under the battery. do you guys have problems reassembling it again and again? Or how do you handle it?
Click to expand...
Click to collapse
Im using glue like in the link if applying pressure for a day or two doesnt work.
I applied a little double sided tape under it, then when i left the phone for a few days with the battery in it seemed to stick down fairly well. Not like factory new, but good enough.

Replacing Touch Digitizer fix NonResponsive Screen?

Hey everyone my HTC HD2 got the Non-Responsive screen problem a week ago, & did a lot of research and found out that it was most likely a hardware problem with a cable..... So a lot of people would tell the people with the problem that the "Touch Screen Digitizer" is dead (like the cable), or it needs to be cleaned... pretty well go out and buy a new one... BUT I have never found evidence that someone has done this and it has successfully "cured" their HTC HD2 Non-Responsive touch screen problem...
So I was looking for anyone on the forums that could confirm this is a solution or give me any tips on what I should do.... AND no I don't have enough money to get a new phone, nor do I live in the USA so I can't send it in to fix it...
This is what I was going to buy for it:
http://www.ebay.ca/itm/NEW-OEM-HTC-...781?pt=LH_DefaultDomain_0&hash=item519a3d2e45
Thanks for taking the time to read my Thread, its much appreciated!! I hope I can find a fix!!
PS: If anyone wanted to know what it looks like out of curiosity I posted 3 pictures with RED circle HIGHLIGHTING the problem when I try to touch something....

My digitizer has been a bit dodgy for the past few months. It's ironic that when I finally found out what the issue was and called HTC, my factory warranty had ended exactly 4 days prior to the call.
Fast forward 3 months and my phone has now been unresponsive for 3 hours despite my prying and tweaking various hard parts.
I disassembled the phone down to the main board just to see how hard the install is, but it's a bit intimidating once it's time to start pulling all the film and ribbons. A bit too tight and small parts for my liking.
Time to hit CL to see if I can find a cheap replacement.
Good luck with your repairs. I may be following in your footsteps if I can not find a good deal.

Yeah I will see how well it goes... if anyone has useful info, i will be more than grad to hear it
Thanks

Many people attempt to replace a digitizer, but I simply don't recommend it, we see enough of do-it-yourselvers who created problems in addition to the original ones.
What I do recommend, however, and I stated it on many threads already, is to get an LCD+DIGITIZER assembly. Simply because it is easier to fit. Not saying the overall fitting is easy, always depends on your overall skill, so ensure that you are familiar with the procedure BEFORE you begin. But you will save yourself a lot of trouble by getting the whole thing, as opposed to the digitizer only for the sake of a few bucks.
However, if anyone still feels intimidated by the whole thing, I am on the lookout for working main board. Advertised a few times in the marketplace with limited success. So if anyone smashed their baby and will be looking to replace, rather than repair - drop me a PM. I am in NZ. Will pay by Paypal.

Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!

cheeselump said:
Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!
Click to expand...
Click to collapse
How much did the set cost?

cheeselump said:
Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!
Click to expand...
Click to collapse
Thanks I will check it out, hopefully it won't be to hard and I hope I can repair it!! oh and could you post a link of the youtube & manual you used to replace your screen?? Thanks
Oh would anyone suggest then just calling HTC and sending it to them to repair?? or does that cost to much??
Thanks everyone for the help

One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.

GnatGoSplat said:
One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.
Click to expand...
Click to collapse
Yah I was looking at the video's and they were taking off EVERYTHING... it looks really hard to do.. I don't know whether I want to do it anymore.....
oh and are you talking about the digitizer itself or the LCD+digitizer for your method?
Thanks

Heronization said:
Yah I was looking at the video's and they were taking off EVERYTHING... it looks really hard to do.. I don't know whether I want to do it anymore.....
oh and are you talking about the digitizer itself or the LCD+digitizer for your method?
Thanks
Click to expand...
Click to collapse
Yep, there is absolutely no reason to take off everything like some people seem to think is necessary.
The way I'm talking about requires removing LCD+digitizer. In fact, I think you'll always have to remove both because the connector for the digitizer is under the LCD. Anyway, the way I did it, I went from removing the the phone insides from the rear housing straight to separating the LCD+digitizer assembly from the frame. No removal of any boards or flex cables. The only cable to be disconnected is the LCD+digitizer assembly one. Getting it disconnected and reconnected does require unplugging the front button flex and removing the screws for the bottom logic board to loosen it, but that's all.

GnatGoSplat said:
Yep, there is absolutely no reason to take off everything like some people seem to think is necessary.
The way I'm talking about requires removing LCD+digitizer. In fact, I think you'll always have to remove both because the connector for the digitizer is under the LCD. Anyway, the way I did it, I went from removing the the phone insides from the rear housing straight to separating the LCD+digitizer assembly from the frame. No removal of any boards or flex cables. The only cable to be disconnected is the LCD+digitizer assembly one. Getting it disconnected and reconnected does require unplugging the front button flex and removing the screws for the bottom logic board to loosen it, but that's all.
Click to expand...
Click to collapse
Wow that sounds pretty simple! and for you it all works perfectly now?? no calibration needed or problems?? Maybe I will try it after all..... but what screw drivers to I need to dissemble it?? the screws look different from normal..

Heronization said:
Wow that sounds pretty simple! and for you it all works perfectly now?? no calibration needed or problems?? Maybe I will try it after all..... but what screw drivers to I need to dissemble it?? the screws look different from normal..
Click to expand...
Click to collapse
Well, it's not that simple because simply getting the HD2 insides out of the rear housing is difficult if you've never done it before. I believe the screwdriver you need is a Torx T-5. Once you get the screws out, you will need a plastic opening tool to go between the digitizer and rear housing frame. They look like this:
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
I found it comes out much easier if I use the tool to make a gap along the top edge and then slide the entire end of a scrap credit card into that gap, then that makes the whole assembly easier to pry out along the sides with the tool. I know on one of the vids, the guy takes forever doing this part and I can understand why, but once I figured out sliding a credit card into the top gap as far as it would go, I was able to get it apart much easier.
I can't answer whether the phone will work properly, because I just ordered the new digitizer over the weekend and haven't put it back together. I did remove the LCD+digitizer assembly and then re-connected it and put it back, then powered on the phone just to make sure pulling the LCD didn't hurt it - it didn't, everything worked as well as it did before. I did manage to crack the digitizer more when I tried to get the insides out of the rear housing before I figured out the credit card trick, so fortunately I was not trying to save my digitizer as it was already cracked. If you are just wanting to try to clean or fiddle with the connection, then you're going to have to be a LOT more careful than I was because it was all too easy to crack the digitizer!
I'm guessing yours probably needs replacement though. I sent my HTC Surround in for a funny acting digitizer, and the digitizer was replaced.
Oh, and if I would have bought an LCD+digitizer pre-assembled unit, that would have been super easy to replace. However, I opted to save $50+ by buying just the digitizer. Not too sure how I'm going to prevent dust getting in it, and I've read thickness of the adhesive is critical. I may regret it later!

GnatGoSplat said:
Well, it's not that simple because simply getting the HD2 insides out of the rear housing is difficult if you've never done it before. I believe the screwdriver you need is a Torx T-5. Once you get the screws out, you will need a plastic opening tool to go between the digitizer and rear housing frame. They look like this:
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
I found it comes out much easier if I use the tool to make a gap along the top edge and then slide the entire end of a scrap credit card into that gap, then that makes the whole assembly easier to pry out along the sides with the tool. I know on one of the vids, the guy takes forever doing this part and I can understand why, but once I figured out sliding a credit card into the top gap as far as it would go, I was able to get it apart much easier.
I can't answer whether the phone will work properly, because I just ordered the new digitizer over the weekend and haven't put it back together. I did remove the LCD+digitizer assembly and then re-connected it and put it back, then powered on the phone just to make sure pulling the LCD didn't hurt it - it didn't, everything worked as well as it did before. I did manage to crack the digitizer more when I tried to get the insides out of the rear housing before I figured out the credit card trick, so fortunately I was not trying to save my digitizer as it was already cracked. If you are just wanting to try to clean or fiddle with the connection, then you're going to have to be a LOT more careful than I was because it was all too easy to crack the digitizer!
I'm guessing yours probably needs replacement though. I sent my HTC Surround in for a funny acting digitizer, and the digitizer was replaced.
Oh, and if I would have bought an LCD+digitizer pre-assembled unit, that would have been super easy to replace. However, I opted to save $50+ by buying just the digitizer. Not too sure how I'm going to prevent dust getting in it, and I've read thickness of the adhesive is critical. I may regret it later!
Click to expand...
Click to collapse
Ok thanks I think thats what I am going to do, first dissemble it then try to move the cable around because, just yesterday it started to work again and then today it isn't working. I will contact you if I have a problem or get stuck, if that is ok with you
Thanks a lot

Heronization said:
Ok thanks I think thats what I am going to do, first dissemble it then try to move the cable around because, just yesterday it started to work again and then today it isn't working. I will contact you if I have a problem or get stuck, if that is ok with you
Thanks a lot
Click to expand...
Click to collapse
Yeah, no prob. I can post a pic of the digitizer lifted from the frame which shows where the adhesive tapes are that you have to go through, if it would help.

GnatGoSplat said:
One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.
Click to expand...
Click to collapse
Hey lolz I need your help already, I just took off the back housing and now Im lost on what to do... It looks to me as if you do have to remove the cables from the motherboard to get to it?? and what is the double sided tape? and isn't everything connected to the lcd?? lolz this is my first time doing any phone disassemble.. Thanks
added a picture of what I was thinking of doing... or am I doing this all wrong... because you did say we don't need to remove any flex cable or wires and stuff
Thanks!!

Heronization said:
Hey lolz I need your help already, I just took off the back housing and now Im lost on what to do... It looks to me as if you do have to remove the cables from the motherboard to get to it?? and what is the double sided tape? and isn't everything connected to the lcd?? lolz this is my first time doing any phone disassemble.. Thanks
added a picture of what I was thinking of doing... or am I doing this all wrong... because you did say we don't need to remove any flex cable or wires and stuff
Thanks!!
Click to expand...
Click to collapse
Nope, I didn't disconnect anything except the circled connector on the far right of your picture. You will need to do that to remove the LCD flex cable from the logic board.
I've attached a pic of the LCD module loosened from the frame. What you do is use something thin and flat to separate the adhesive tape holding the LCD to the frame. You will need to lift some of that black fabric tape on the edge to see where the LCD module meets the frame. Near the top, you will probably have to slide your separating tool all the way through to separate the tape (I used a scrap credit card). Avoid the area where the LCD flex cable is, because you could damage it! It's on the lower right of the LCD if you are looking from the front. When the LCD is loose, lift up from left to right (when LCD is facing you), pretending that there is a hinge on the right side. This is because you don't want to put any force on the LCD flex.
Once you've got your phone looking like my picture, you can remove the "captain" (orange tape), unlatch the LCD flex from the top, remove the button flex from its connector, then loosen the bottom logic board from the frame just enough to pull the flex out of the connector.
I hope that makes sense! It probably helps to know that a very strong double-sided sticky tape is all that holds the LCD+digitizer assembly to the frame, and there is only one flex cable connecting LCD+digitizer assembly to the rest of the phone.

GnatGoSplat said:
Nope, I didn't disconnect anything except the circled connector on the far right of your picture. You will need to do that to remove the LCD flex cable from the logic board.
I've attached a pic of the LCD module loosened from the frame. What you do is use something thin and flat to separate the adhesive tape holding the LCD to the frame. You will need to lift some of that black fabric tape on the edge to see where the LCD module meets the frame. Near the top, you will probably have to slide your separating tool all the way through to separate the tape (I used a scrap credit card). Avoid the area where the LCD flex cable is, because you could damage it! It's on the lower right of the LCD if you are looking from the front. When the LCD is loose, lift up from left to right (when LCD is facing you), pretending that there is a hinge on the right side. This is because you don't want to put any force on the LCD flex.
Once you've got your phone looking like my picture, you can remove the "captain" (orange tape), unlatch the LCD flex from the top, remove the button flex from its connector, then loosen the bottom logic board from the frame just enough to pull the flex out of the connector.
I hope that makes sense! It probably helps to know that a very strong double-sided sticky tape is all that holds the LCD+digitizer assembly to the frame, and there is only one flex cable connecting LCD+digitizer assembly to the rest of the phone.
Click to expand...
Click to collapse
Awesome I will try it now, I do need to heat the screen some for the tape to get sticky so I can pry it off right?? and I am guessing once you have removed that tape you can't "just stick it back on together and it will work right?? right??

Heronization said:
Awesome I will try it now, I do need to heat the screen some for the tape to get sticky so I can pry it off right?? and I am guessing once you have removed that tape you can't "just stick it back on together and it will work right?? right??
Click to expand...
Click to collapse
You could try heating; I didn't, but maybe it will come apart easier if you do. In the HTC factory service video, they mentioned putting the whole phone into the oven to loosen the tape. I didn't know if it would be a good idea to do that complete with all the circuit boards or not.
No, without heat, the tape is definitely ruined and I will need to replace it. I was planning to use some leftover tape I have from fixing iPhone digitizers so I didn't even attempt to salvage the existing tape. Not sure if it's even possible to salvage that tape considering you need to stick some kind of tool in there to separate it.

GnatGoSplat said:
You could try heating; I didn't, but maybe it will come apart easier if you do. In the HTC factory service video, they mentioned putting the whole phone into the oven to loosen the tape. I didn't know if it would be a good idea to do that complete with all the circuit boards or not.
No, without heat, the tape is definitely ruined and I will need to replace it. I was planning to use some leftover tape I have from fixing iPhone digitizers so I didn't even attempt to salvage the existing tape. Not sure if it's even possible to salvage that tape considering you need to stick some kind of tool in there to separate it.
Click to expand...
Click to collapse
Alright thanks I have to go and don't know when I'll be back, but I will try it tonight and hopefully I don't break anything...
Thanks for the help!

the definitive HD2 disassembly and screen replacement thread

My HD2 finally developed the dreaded unresponsive touchscreen problem this week after just over 2 years use and as I'm now out-of-warranty I've decided to replace the lcd/digitizer myself.
Searching XDA and youTube for inspiration threw up a lot of scattered information, some useful and a lot more that was wrong and misleading so i'd like to establish a thread here with all the right answers provided, in detail.
This should also be of interest to those with dropped phones and smashed screens.
So far I've discovered:
- my unresponsive touchscreen is a hardware (not software) issue; caused by damage to the digitizer cable accumulated over time by repeated presses of the power button, to which it is physically adjacent.
- if the cable is only slightly damaged, a temporary fix might be achieved by pressing on the power button until the touchscreen starts responding again and then avoiding pressing the power button thereafter. ie. letting the phone timeout to sleep automatically and waking the phone up by pressing one of the other buttons rather than the power button.
- a permanent fix involves replacing the digitizer which requires an almost complete teardown of the phone. I'm open to any other suggestions from posters for say, repairing the cable although I haven't seen any as yet.
- although only the digitizer needs replacing, it's easier (albeit slightly more expensive) to replace the LCD and digitizer as a unit, which is the same part whatever version of HD2 you have.
- The disassembly procedure is fiddly with a lot of easily-breakable cables and connectors.
I've already acquired the LCD/ digitizer (part no. 60H00300-00P) from ebay, for £22.99 shipped, which was a pretty good deal as the standard UK price seems to be ~£38. The cheapest I found for the digitizer only (without LCD) in the UK was 11.95 shipped. The difference in price wasn't worth the extra installation hassle for me.
other required items are: a T5 torx screwdriver, a small jeweller's screwdriver set, tweezers, a guitar pick, an old credit card or similar, superglue (or double-sided adhesive tape) and thin (2.5mm?) single-side adhesive tape. also reading glasses or a magnifier might be handy depending on the quality of your close vision (i'm 54 so mine lacks somewhat).
This is by far the best instructional video I have found to date:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm#Zerlegeanleitung
.. unfortunately its in German, which mostly isn't a problem as you can see what he is doing, except at the end as he describes (at length, rather than showing) the final step of superglueing the new LCD/ digitizer into the phone chassis, where i thought I might have missed some important details. Perhaps any German-speaking posters could fill us in on that procedure?
The above website also accompanies the video with some text descriptions of the various stages of disassembly which I will get google- translated into English.
There is another useful-looking instructional site here (hi-res pics, no video):
http://www.ifixit.com/Guide/Installing+HTC+HD2+PB81120+Screen/5651/1
Finally there are also some leaked official HTC breakdown videos on youTube @720p here:
disassembly:
http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
reassembly:
http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=player_embedded
I'll keep the thread updated as I go and I would welcome any help or tips from anybody that has already been down this road.
My aim is to develop a foolproof instructional guide that almost anybody can follow to extend the life of this great phone.

I've read that german thread as well and I'd agree that it does seem to be a very good guide, to read it in english open the page in chrome (or search for the thread in google) and let google translate it,
Step 32 for example translates to Step 32: Now as in step 31 and proceed to the bottom of using each 1 drop of superglue and moisten with clothespins along with the 30-minute fix waiting / drying time. In the bottom right where the flex board stops at the edge of the touchscreen and LCD connector watch film. There, only the metal bridge very carefully and very economical with wet glue. Important: Use sparingly only at the marked positions superglue! Never close the buttons at the bottom, even if the lure still should be as large. It is held there by our HTC special adhesive film wonderfully.​

HypoTurtle said:
I've read that german thread as well and I'd agree Step 32: Now as in step 31 and proceed to the bottom of using each 1 drop of superglue and moisten with clothespins along with the 30-minute fix waiting / drying time. In the bottom right where the flex board stops at the edge of the touchscreen and LCD connector watch film. There, only the metal bridge very carefully and very economical with wet glue. Important: Use sparingly only at the marked positions superglue! Never close the buttons at the bottom, even if the lure still should be as large. It is held there by our HTC special adhesive film wonderfully.
Click to expand...
Click to collapse
Thanks, I'll have a look and see where his "marked positions" are. i already figured from the video that he was stressing about the buttons.
As this is the only part that I'm nervous about, I'd be interested in anybody else's experience of sticking the new lcd/ digitizer into the chassis. what did you use? and how did it go?
Presumably HTC didn't use superglue at the factory. Has anybody tried double-sided adhesive tape for this?
EDIT: I've just ordered some cheap generic double-sided tape on ebay, advertised as "New Clear Strong Permanent Double Sided Self Adhesive Craft Packaging Tape".
I'm still waiting for my LCD/ digitizer part to arrive and in the meantime bought another HD2, with a smashed screen, to practice disassembly on.
my own HD2 is currently behaving itself as long as I don't forget not to touch the power button.

i've now received my digitizer/ lcd part + (noname) double-sided tape in the post.
i've also found another XDA thread speaking in more detail about the step of fixing the lcd/ digitizer back into the middle chassis here:
http://forum.xda-developers.com/showthread.php?t=1341927
there is some debate in that thread over whether tape might be a better bet than superglue. the tape they recommend is 3M brand 2mm double-sided, for which I have sourced a supplier on eBay (item #281023942070 -- "3M 2mm x 50m Adhesive Tape Roll for iPod iPhone iPad - Transparent") for £5.99. I'm going to get a roll of that but may still opt for the superglue method ... undecided.

Mine was the same,
After seeing some videos I decided to buy a digitizer from ebay, it looked really easy on the videos. I bought one for 25€ , the ribbon cable looked strange but I decided to go on. After finishing everything the digitizer doesn't respond. I want to test the digitizer alone, any idea? I've access to a complete electronic lab, so there's no problem to use an oscilloscope or whatever.
Thanks in advance

Lbalddy said:
Mine was the same,
After seeing some videos I decided to buy a digitizer from ebay, it looked really easy on the videos. I bought one for 25€ , the ribbon cable looked strange but I decided to go on. After finishing everything the digitizer doesn't respond. I want to test the digitizer alone, any idea? I've access to a complete electronic lab, so there's no problem to use an oscilloscope or whatever.
Thanks in advance
Click to expand...
Click to collapse
sounds like you might have bought the wrong digitizer. You know there are 2 types, soldered and solderless (plug-in) which have different connectors?
Any pics? How did the disassembly go otherwise?
in the german video i posted, he shows how to reconnect the ribbon cables and test the lcd/ digitizer before glueing it in and reassembling the phone.