Related
how the hell do you turn off the device, if i press the power button once the screen goes completely black and i cannot tap anything but i can still recieve calls and if i press any of the buttons it comes alive. if i press and continue pressing for two seconds, the screen simply dims and i can still tap on the screen?
so how do you switch it off?
and if you reset how do you prevent it from loading the T-Mobile customization?
Also, mine has a dead pixel and i have just opened it can i take it back as faulty? it's only one dead pixel but it's really really annoying...does it count as a fault. i'm gonna try and take mine back tomorrow
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Longkesh said:
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Click to expand...
Click to collapse
Well, when i do that the screen goes blank but i can still recieve calls and if i press any of the buttons it goes back on again!!!!!!!!!!!!
To totaly turn off the device you need to slide the battery lock button out and then back in. It is the only way I have found to totaly turn the device off.
To lock the keys go into "settings" then "system" and choose "button lock" then choose "Lock all buttons except power button".
John
oh, i see. i thought it was like the other phones, nokia SE etc.
thanks alot for all your replies
thank you
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
sayreul said:
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
Click to expand...
Click to collapse
I dont think it has anyhting to do with PDA. I have had 3 PDA's before. All of them had an "off" button that turned the thing off. Ditto for phones. So this is just Microsoft's strange decision. Dont make the guy feel back just because he is thinking logically - and they are not.
I've had quite a few PDAs over the years:- Casio E80? Psion 3, 3a, 3c, 5, 5mx, iPaq 3630, XDAI, XDAII, MDA Compact.
None of them have ever had an off button. They turn off the screen and may even slow the processor or put it in sleep mode. But they all kept their memory powered up and clock / alarms / appointments alive at all times.
This may change in the future as flash ram is now fast enough that you could actually run stuff from it so you could truly kill power (apart from clock and wakeup stuff) without emptying your memory.
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
skagen said:
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
Click to expand...
Click to collapse
So, if your Palm completely powered down when you pressed this magic "off" button, how come the alarms still worked? How come it woke up when you pressed any of the four application buttons or tapped the screen? How come your data was still kept in RAM?
More wisdom from the skagen...
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
But this is not so for most PDA:s on the market.
Most PDA:s will go into some kind of sleep mode when you press the "off" button. And mostly it is not even a true sleep mode, a lot of processes are still running, and even network connections can be kept active. This is also the way most PDA users would want their PDA to work. Also, the way most PDA:s are built, a power down means resetting everything back to defaults and thereby loosing all of your data and third party applications. This could be cured by using non volatile RAM for all of the memory, but I guess there is probably a good reason why this is not normally done.
Actually, on most modern computers a short tap on the power button will put them in suspend mode and holding it for more than two seconds will turn them off. So the only thing that is really strange with the PDA is that a long press on the button will not even put it in sleep mode but only shut off power to the display. And as I actually don't know anyone that has ever used that worthless function I think they should probably replace it with a "real" sleep mode, where all of the hardware is actually shut off except for support voltage to keep the memory "alive".
bamse said:
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
Click to expand...
Click to collapse
On N 6100 ,and on all nokia phones, the clock alarm wake's up the phone... You then have a choice of whether to activate the phone or not...
Same with all the Siemens phones I owned ( 4 so far). When shutting off the phone, the clock and alarms keep working. The only thing that does not work, off course, is the radio so incoming calls are diverted to voice mail. But with the phone off, the alarms still wake me up!
It would indeed be a good idea if using the power button on any type of XDA would turn the device really off, using power only for keeping the clock working and the data stored...
If the alarms jeep working on your phone when in "off" mode it is not actually off but in a low power mode with the phone functions turned off. So what you are really asking for is that the power button should turn off the phone but keep the pda running. This seems quite useless to me. Exactly how often are you in such a hurry to turn off the phone?
Yes, the device is in sleep mode, but it is a very deep sleep indeed, since it uses close to zero power. When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button. Seems like rather a hassle, doesn't it, compared to a normal phone? So I don't mean for the PDA to keep running ful operations, but rather to power down to a level where it only uses a little power to keep the storage working. And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
This guy is unbelievable. You were claiming that your Palm turned completely off when you hit the off button - not a cellphone, jerk.
Koksie said:
When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button.
Click to expand...
Click to collapse
Wrong - programs that can be _are_ suspended when you put the PDA into standby. Try it with MediaPlayer.
How do you know the Today screen is still running? Like you know the fridge light really stays on when you shut the door?
Wouldn't you be complaining more (because of the missed calls) if turning the PDA off to save the battery also killed the phone?
Most of us can get our heads round this - the Standby button on the side controls the PDA. The Flight mode controls the phone. Not exactly difficult, is it?
Koksie said:
And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
That's where you fall into sjkagen's trap, again. For the zillionth time, the Jam/Compact is not just a phone. It's primarily a PDA. That's why it costs so much more than a phone. And on a PDA, you need to be able to look up information instantly - not have to wait a minute for the darn thing to boot up.
Click to expand...
Click to collapse
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
Oh skagen, how ignorant you are. Seems you cannot understand pictures, let alone words.
The label on the Jam "off" button is a line through a broken circle, which is the IEC symbol for STANDBY, not POWER OFF. Just like on all other PDAs, and your TV remote control.
See
http://eetd.lbl.gov/Controls/overview/symbols1.pdf
Now look again at all your "phones" which completely shut down when you press the "power" button. What symbol do they have?
Seeing as you obviously have so much difficulty telling the difference between a cellphone and a Palm, a phone and a PocketPC, or a power switch from a standby button, here's another teaser for you.
1. How do cellphones manage to keep their memory when they are turned off or the battery is removed?
2. What is the difference between the memory in cellphone and that in most PDAs?
3. Why do most PDAs have Standby (Soft Off) and not Power (Hard Off) buttons?
Wow, seems like some people are getting really sensitive when I call the Magician a phone... Sorry if I insulted you guys, it is just that I compare it to a phone because I use it for that the most, but I do understand that it is actually much more than that!
I have no problems with the way the sleep button works, it is ok for me, I just wanted to say that there are other possibilities that could have been used to map the button to. Especially since some people would have liked the button to work more "phone wise". But since it is primarily a PDA, I see that this current application is the most logical thing for the button to do.
BTW you are totally right that most running apps are termintated when pushing the power button. Although WMP stays active in the running programs menu, the music is cut off. However, since the prog stays loaded, does this consume more power than shutting it down completey (e.g. with SPB Pocket Plus)?
I think the Today screen stays loaded BECAUSE IT IS RIGHT THERE AFTER WAKE UP, just as you say: it does not have to be booted first. BTW: I have a little window in my fridge door to check wether the light goes off .
And please guys, don't call each other jerks or ignorant just because someone's questions or remarks anoy you. Reply polite or don't reply at all!
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
If you lock it, how do you want to wake up the device?
I wouldn't mind finding a way to do something similar. Maybe not lock the button entirely, but make it so that you have to press the power button for a long time (say 3 secs), or press the power button and the hang up button and the same time.
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
chris10230 said:
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
Click to expand...
Click to collapse
No, this wont do what is needed. The Keylock simply stops someone from using the phone. It won't stop the screen from coming on accidental in you pocket.
You can 'lock' the phone from accidental use by pressing and holding the 'hang up' button, but again this has nothing to do with screen activation.
It is true that pulling out the stylus will both switch on and unlock the phone though, so disabling the power button may not be all bad. I still think it would be better to activate the screen via a single long button press, or some such.
Totally agree with swinster's comment and proposal.
- Lock the phone by pressing + holding "hang up" button (already implemented)
- Keep phone locked and screen off until
either stylus is pulled out
or power button and hang-up button are pressed at the same time
But disable screen-on when power button alone is pressed (like it is now).
- Anybody able to implement this proposal?
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
This would be a great solution.
Mine switches on in my pocket all the time, they should have recessed the button, I thought about trying to remove it.
anorak22 said:
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
Click to expand...
Click to collapse
Its a bit of an overkil, but my laptop come with me most places.
Reminds me of the Morecambe and Wise sketch (??) where the battery was the size of a suitcase.
I think I need a car charger - which brings me to another grumble - why didn't they implement a standard mini USB interface?
Standard mini usb fits and charges.
ALExander
alx37 said:
Standard mini usb fits and charges.
ALExander
Click to expand...
Click to collapse
Ooh, Ok. I thought they were different shapes. Will look into this.
[Edit - I have just read that it IS backward compatible with USB - the different shape is becasue the HTC connection supplies audio]
I'm guessing that any old Car Charger with mini USB will work then?
anorak22 said:
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
Click to expand...
Click to collapse
When you set EnableInputAtSuspend = 0, it will not unlock the power button at suspend. . It will then only awake via the Stylus. But I do not know if this setting also works on the Diamond2.
I am having some odd problems with mine if i press the power button to put it into standby. Sometimes when i press it it turns itself straight back on others it will come back on if i shake it (like the G Sensor is somehow linked to bringing it out of standby). Can you guys check this so i can confirm if i have a faulty unit please?
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
Thanks, sounds plausible, I'll call the supplier tomorrow.
I am sure that on my D810 I could set the lock on at zero seconds with no pin code. Then the keylock would come on every time I came out of standby but with no change of accidentally starting applications and making calls.
On my D2 the password is compulsory for keylock.
Any solution here? I don't want a pin code.
I power button fix would be even better to also save battery. The accidental turning on is a very annoying feature.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
ye man,ive got this prob...the phone randomly unlocks bcoz the stylus sensor...im lookin for some application that turns the sensor off....havent found anythin yet...
This is still, by far, the most anoying "feature" of the TD2 phone. I can't believe that HTC did not have the forethought to think that people might actually put the phone in their pockets.
It should be a simple fix so that when the phone is off or in standby, the power button has to be press for say a second before the phone will come on, rather than just a single tap. They can do this to turn the phone off, so why not on?
Is there no other way to get the phone out of idle then pressing the button on the top of the phone?
it is a pain in the ass.
I agree, its not the most convenient.
Pressing the tracker ball does it for me.
lilHermit
You'll get used to it in no time!
Trackball method does not work for me.
doesnt work for me either, the tracker ball would be nice...
did you change an option for that?
The track ball doest do it for me either. I don't mind using the button on top of the phone. I've always used HTC phones and a lot of them use the button on top to wake it up. You should get used to it pretty quick.
Damn, I was hoping the trackball would work... I disliked this about the Droid as well. It takes two hands to unlock the phone, doesn't it? The G1 and MT3G methods were better.
shouldn't we be able to remap the button pressed to work with the trackball? (with root access that is)
i agree...im not liking the top button to wake up the phone...trackball does not wake it for me either...
CLOCK APP
I just realized if you open the clock application, and let the phone go to sleep, then you can "Turn it on" with the trackball or volume rocker.
Now if there was a way to have the phone set to "Sleep = Clock" we'd be golden; the clock screen doen't look that bad, either.
I will say, the button placement on the top is much better than the Motorola droid. I was worried myself, but I got used to it super fast, and it isn't an issue at all.
(Former G1 owner, used to just pressing menu twice)
Just download "Keyguard Disabler" from the Android Market. It will allow you to use the trackball to turn the screen back on.
The screen is capacitive touch, and so is the "hardware" buttons.
If you want to be able to power up the phone from sleep with these buttons, that would require the capacitive touchscreen to be active while the phone is sleeping.
Wouldn't that affect the battery life?
iifuzz said:
Is there no other way to get the phone out of idle then pressing the button on the top of the phone?
it is a pain in the ass.
Click to expand...
Click to collapse
Agreed. look here too: http://forum.xda-developers.com/showthread.php?t=613864&page=2
David1171 has a partial solution. Problem is I'm guessing, that there is no way to setup a double tap. Maybe someone knows.
I'm hoping that a future release of spare parts will have a setting for both a double or triple tap of the track bar to wake up, with or without the slide lock. ( I think that the slide lock would be less annoying if the track ball woke it up first instead of the poorly located power button) Also I am hoping that it will have settings to adjust the trackball notification flash speed and color for different google apps.
Just to let you know:
There is a thread about the trackball for wakeup thing http://forum.xda-developers.com/showthread.php?p=5337345
I got used to it pretty fast, its funny my other phone is a G1 and i find myself trying to unlock it by pushing up top all the time now haha, just become instinct.
I've heard a lot of people say they have trouble unlocking the Nexus One with one hand, but personally I have no trouble unlocking the device with one hand... with either hand.
lilHermit said:
Pressing the tracker ball does it for me.
lilHermit
Click to expand...
Click to collapse
This person does not own a Nexus One.
Lockbot from market. Don't need pro, the free version will do.
Dunno why they copied the iPhone with the slide to unlock, with the magic its so easy you press the power button which is near the trackball then press menu.
It would be great if you could just press trackball then menu button to unlock.
So I was messing with my phone, showing off JK6 and all it's glory to a friend of mine who also has a Vibrant, when suddenly the phone lagged a bit and I heard a camera shutter. Then a little pop-up came up saying the screen capture had been saved. I look in my gallery, and lo and behold, it actually screen captured! And I'm not even rooted! I look in my running applications, and there it is, ScreenCaptureService (com.sec.android.app.screencapture).
Now after a good half hour of Googling, I found out that the Tab can take screenshots by holding down the back button then hitting the power button. But I wasn't even near the power button when it happened, so that couldn't be it. I also found that in the leaked Froyo builds for the Epic 4G, a few people had the same thing with a ScreenCaptureService in their running applications. Someone mentioned you had to hold down the back button then hit home to capture, but I tried pretty much all the methods under the sun and to no avail.
Has anyone else stumbled upon this and/or found out what the key combo is?
it's a mystery.. lol but we all follow the same pattern.. we discovered it by accident once but never able to duplicate it again..
Happened 3 times. Couldnt duplicate it
how? i know i was pressing down the back button to exit zedge... then click! picture saved i dont really know what triggered it other than the back button was involved..
I have tried to duplicate this as well since I have come across it many times. When you guys figure it out let me know! Lol
Sent from my SGH-T959
I have noticed this too and ONLY when I am in the messaging app. I can be typing something and it randomly takes a screenshot. I dont know what combination of keys are used but Its kinda annoying and I would like to turn it off without completely removing it.
Just happened to me and by reading the thread it's random as hell. I was in the "Location and Security" settings and I heard the camera shutter sound. Like everyone else I tried to duplicate it and couldn't.
coasterman927 said:
So I was messing with my phone, showing off JK6 and all it's glory to a friend of mine who also has a Vibrant, when suddenly the phone lagged a bit and I heard a camera shutter. Then a little pop-up came up saying the screen capture had been saved. I look in my gallery, and lo and behold, it actually screen captured! And I'm not even rooted! I look in my running applications, and there it is, ScreenCaptureService (com.sec.android.app.screencapture).
Now after a good half hour of Googling, I found out that the Tab can take screenshots by holding down the back button then hitting the power button. But I wasn't even near the power button when it happened, so that couldn't be it. I also found that in the leaked Froyo builds for the Epic 4G, a few people had the same thing with a ScreenCaptureService in their running applications. Someone mentioned you had to hold down the back button then hit home to capture, but I tried pretty much all the methods under the sun and to no avail.
Has anyone else stumbled upon this and/or found out what the key combo is?
Click to expand...
Click to collapse
Pressing the back and power button started the screencaptureservice but did not take a screen shot. I killed it in running services and tried pretty much every button combo, nothing... Pressed back and power button again and sreencaptureservice is running again, but still no screenshots...
Sent from my SGH-T959 using XDA App
dubbz106 said:
Pressing the back and power button started the screencaptureservice but did not take a screen shot. I killed it in running services and tried pretty much every button combo, nothing... Pressed back and power button again and sreencaptureservice is running again, but still no screenshots...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
yes, looks like BACK and POWER call for screencapture service. so anyone figured out how to actually take one ?
It's so funny to me how this forum is loaded with so many intelligent people and we can't figure this out. For those who did get it to work, are you stock or on a custom rom?
When I try back + power I am not able to get the screencapture app to open. My custom ROM does have the .apk included though.
It would be nice to see if we can get this working for those who do not want a 3rd party app or root.... plus, I dont think any other android phone has this feature.
s15274n said:
It's so funny to me how this forum is loaded with so many intelligent people and we can't figure this out. For those who did get it to work, are you stock or on a custom rom?
When I try back + power I am not able to get the screencapture app to open. My custom ROM does have the .apk included though.
It would be nice to see if we can get this working for those who do not want a 3rd party app or root.... plus, I dont think any other android phone has this feature.
Click to expand...
Click to collapse
there is no screen capture app. (there is apk file). all it does is launch the service. I suppose there is some sort of weird key press combinations to actually take the shot
the .apk (app) is in system/app... I understand there is no icon in the app drawer or anything, ha.
On y Galaxy S I9000 (France) holding down the back butter and pressing the home button triggre the screenshot
Hi,
Just use ShootMe (free from market) and when you shake your phone will get a screen capture.
inspigr said:
Hi,
Just use ShootMe (free from market) and when you shake your phone will get a screen capture.
Click to expand...
Click to collapse
yes but you have to be root i think.
Been trying to figure this out off and on for a while now. Holding the back button definitely activates the screencapturesevice but I can't for the life of me get it to take a screenshot. My girl has done it on accident but had no idea what she did. Kind of fun to have a froyo "puzzle" to solve though. Guess I know what I'm doing on the flight home today lol.
I have a I9000M and to take a screen shot using this stupid service you hold your finger on the back button and tap the home button, I noticed that the Vibrant is missing a home button.
My problem is that sometimes this service starts up and goes into screen capture mode just by tapping the back button and the only way I can get out of this mode is to take a screen shot. So I currently have over 200 screens of various crap that I dont want.
Does anyone know what would happen if I removed this service completely?
BioHazard2000 said:
I have a I9000M and to take a screen shot using this stupid service you hold your finger on the back button and tap the home button, I noticed that the Vibrant is missing a home button.
Click to expand...
Click to collapse
Um, what? The Vibrant, like any other Android phone, has a home button.
exoplasm said:
Um, what? The Vibrant, like any other Android phone, has a home button.
Click to expand...
Click to collapse
I think the home button on the galaxy is that big button in between the menu and back. We may be only randomly getting screen caps because of a software hangup causing the multipress screen cap combo. Perhaps the vibrant soft keys are not multitouch whereas the home button on the galaxy is a separate device that allows holding the back button and hitting that home button at the same time.
and also, some android devices do not have home buttons.
exoplasm said:
Um, what? The Vibrant, like any other Android phone, has a home button.
Click to expand...
Click to collapse
International version have 3buttons. Menu home back. Their home button is physical button unlike us galaxy s.
Sent from my SGH-T959 using XDA App
ok. before i received my s7e, i saw on some tips and tricks vid, that you can change having to push the home button down, to get to the fingerprint unlock, to just touching the home button, and the fingerprint unlock will kick in. but now that i've got my s7e, i have watched at least twenty vids, and haven't found it again. a google search turned up nothing. so, does anyone know how to do this? if so, can you direct me to the instructions, or just outline it?
Simple answer you must press the button first
How many threads to you plan on starting with simple questions that can be found all over the forum?
Sent from my Star-Tac
If the screen is ON, but locked, you don't need to press the button. But for the fingerprint reader to work the screen must be on, so you either need to press the home button or the power button first.
Protip: Or press and hold at same time and it's one fluid motion.
Sent from my SM-G935V using Tapatalk
m3dd0g said:
Simple answer you must press the button first
Click to expand...
Click to collapse
Brava27 said:
How many threads to you plan on starting with simple questions that can be found all over the forum?
Sent from my Star-Tac
Click to expand...
Click to collapse
meyerweb said:
If the screen is ON, but locked, you don't need to press the button. But for the fingerprint reader to work the screen must be on, so you either need to press the home button or the power button first.
Click to expand...
Click to collapse
first, m3ddog, the whole idea is NOT to have to press the home button, but to just touch it. second, brava27, i have searched through out the board, and have not found a single answer to this. what i have found is people misunderstanding this, like the other quotes on here. so if you have nothing substantive to add, stfu! lastly, meyerweb, the whole point is that the screen is OFF. i said when the screen is off, or only the "always on" feature is showing, there is an app, which turns the home button into a capacitive button, so you can just touch it to launch the lockscreen, instead of depressing it. that is the entire reason for the thread, to get to the lockscreen where i can use my fingerprint, without having to acutally depress the home button. hope that clears it all up.
h3ck said:
Protip: Or press and hold at same time and it's one fluid motion.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
what?????? the entire idea of this thread is NOT TO HAVE TO DEPRESS THE HOME BUTTON, but to turn it into a capacitive button. but thanks anyway...
stevae said:
what?????? the entire idea of this thread is NOT TO HAVE TO DEPRESS THE HOME BUTTON, but to turn it into a capacitive button. but thanks anyway...
Click to expand...
Click to collapse
Can I ask why you are so against pressing the home button? Is yours defective? Are you trying to avoid wear & tear?
There is a solution of sorts.. install gravity screen pro, which turns on your screen when you pick up your phone.. then you just touch your finger to the fingerprint reader and wala
Stevea, I perfectly understood what you're asking for. It doesn't exist. I told you how it works, and the only way it works. Sorry you don't like the answer, but those are the facts.
ingenious247 said:
Can I ask why you are so against pressing the home button? Is yours defective? Are you trying to avoid wear & tear?
There is a solution of sorts.. install gravity screen pro, which turns on your screen when you pick up your phone.. then you just touch your finger to the fingerprint reader and wala
Click to expand...
Click to collapse
yeah, the whole idea is past experiences with wear and tear of home buttons being pressed so much they fail. and my problem with your other solution, if i am right, is that the sensors are always on, looking for you to pick up your device, which kills battery life. if i'm wrong about this, please correct me, however. the other thing is i saw it in a tips and tricks video, and it worked perfectly for the reviewer. but now i can't find that video, and didn't write down what it was. but i might try your gravity screen pro. thanks for the tip.
meyerweb said:
Stevea, I perfectly understood what you're asking for. It doesn't exist. I told you how it works, and the only way it works. Sorry you don't like the answer, but those are the facts.
Click to expand...
Click to collapse
meyerweb, you obviously didn't understand perfectly well what i said, because i said that i saw a video, where the reviewer DID use this technique to get to the lock screen several times, so it obviously DOES exist. just because it doesn't come into contact with your little world, does not mean it doesn't exist.
I suspect that the video you saw wasn't actually showing what you think it was. Which is why you can't find it again.
After giving up on trying to enable soft nav buttons without root. I started searching for similar funcationality.. ie use the finger print scanner as a capacitive button.. stumbled across this.. I think this might interest you.. There's an app call easyhome https://play.google.com/store/apps/details?id=com.jamworks.easyhome&hl=en
It doesnt work from the lockscreen, but if you use the power button to turn on, then with this app you could essentially never press the home button.. It seems to work pretty well from my 5 minute look..
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
After giving up on trying to enable soft nav buttons without root. I started searching for similar functionality.. ie use the finger print scanner as a capacitive button.. stumbled across this.. I think this might interest you.. There's an app call easyhome https://play.google.com/store/apps/details?id=com.jamworks.easyhome&hl=en
It doesnt work from the lockscreen, but if you use the power button to turn on, then with this app you could essentially never press the home button.. It seems to work pretty well from my 5 minute look..
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
After giving up on trying to enable soft nav buttons without root. I started searching for similar functionality.. ie use the finger print scanner as a capacitive button.. stumbled across this.. I think this might interest you.. There's an app call easyhome https://play.google.com/store/apps/details?id=com.jamworks.easyhome&hl=en
It doesnt work from the lockscreen, but if you use the power button to turn on, then with this app you could essentially never press the home button.. It seems to work pretty well from my 5 minute look..
meyerweb said:
I suspect that the video you saw wasn't actually showing what you think it was. Which is why you can't find it again.
Click to expand...
Click to collapse
yes, because it's much more likely that i looked right at something, watched it happen, and somehow my vision misinformed me, rather than you just be wrong. seriously man, your powers of deduction suck! i don't need any more input from you, as you've added nothing positive to the thread. find something else to do with your time.
llewelld said:
After giving up on trying to enable soft nav buttons without root. I started searching for similar funcationality.. ie use the finger print scanner as a capacitive button.. stumbled across this.. I think this might interest you.. There's an app call easyhome https://play.google.com/store/apps/details?id=com.jamworks.easyhome&hl=en
It doesnt work from the lockscreen, but if you use the power button to turn on, then with this app you could essentially never press the home button.. It seems to work pretty well from my 5 minute look..
Click to expand...
Click to collapse
yeah, i looked at it, but it screws up the fingerprint sensor. so i got rid of it. but thanks for the info. i really appreciate your response.
Found some related info, posted in a different thread => http://forum.xda-developers.com/showpost.php?p=66028308&postcount=42
Enable 'easy screen turn on' and you can bring the screen up, and unlock it with fingerprint, without any button clicking at all.
Mistaken post
I was about to suggest the wave to wake option
Sent from my SM-G935F using Tapatalk
try easyHome for Samung. It does what u want
You can use the following to turn on the screen and use fingerprint scanner without pressing the home/power button.
1. Open the Settings application and go to the Accessibility settings
2. Tap to open the Dexterity and Interaction settings
3. Touch the Easy Screen Turn On option and make sure it is toggled ON. (If you want to disable the Wave to Turn On Screen feature on Galaxy S7, make sure to toggle it OFF)