my ROM update failed and I can`t connect with USB. I think the USB port is defect. Are there any other solutions of updating the ROM? Maybe via micro SD?
Is it possible to change the ROM complete?
The device shows only "Serial" should I buy a serial cable, will it work?
Many thanks for your help. Cheers from Germany
See http://forum.xda-developers.com/showthread.php?t=420041
Hello,
I'm putting this thread up..again
after and rom upgrade that's failed i also have my hw6915 stuck with the USB/Serial VG.39 message
I used the procedures described all over the threads i could read but it does not work
When I run Sable_RUU get this errors out saying Client_GetOSVer fail !! Error: 501 and hangs up.
My device is out of warranty and HP told me to buy a new one...
Anyone with a better idea ?
Thanks in advance
Sorry for the english....i'm french
yes
just add me on skype (cata_i0an) or yahoo messenger (cata_cata_cs)
Why not post here if you have a solution
Ar fi bine sa partajezi cu ceilalți
Freezzby said:
Why not post here if you have a solution
Ar fi bine sa partajezi cu ceilalți
Click to expand...
Click to collapse
le explic in particular , ba chiar p skype. daca vrei ajutor ai id-urile mele (de skype si messenger).
Yes
amber75013 said:
Hello,
I'm putting this thread up..again
after and rom upgrade that's failed i also have my hw6915 stuck with the USB/Serial VG.39 message
I used the procedures described all over the threads i could read but it does not work
When I run Sable_RUU get this errors out saying Client_GetOSVer fail !! Error: 501 and hangs up.
My device is out of warranty and HP told me to buy a new one...
Anyone with a better idea ?
Thanks in advance
Sorry for the english....i'm french
Click to expand...
Click to collapse
try to install your rom using win xp,after to install NETSCFSetup v2 and NETSCFSetup v3.5 in your pc, and active sync 4.5. Please don`t use windows vista or 7,because the work fail.If it doesn`t work, try in another computer, it have to run very good! you can send me a mail if you want, to [email protected]- i`m from Argentina. sorry for my english!
Nos vemos!!
Hello all,
i've created a rom from a kitchen but I have a serious problem ...
I changed nothing but now my kitchen seems not to work anymore... It just creates bad roms...
I asked my mentor, Shady, how to fix this and he fixed it. He told me it has something to do with memory, with recmodding, ... but I didn't understand him.
Now, the problem is back, and I still cannot fix it by myself.
Can someone please help me, or teach me how to do this?
please help
my friend please help me with P3300 stuck in tricolor screen
johanis1982 said:
my friend please help me with P3300 stuck in tricolor screen
Click to expand...
Click to collapse
??????????
babbelut said:
??????????
Click to expand...
Click to collapse
The problem is this: was stuck in bootscreen IPL 1.13.0001 SPL 1.13.0000.I tried many ROMs but went only with version 3.13.404.1 nl.Nothing has changed, still stuck with IPL 3.13.0001 SPL 3.13.0000 now.not connect with activesync goes uspl.I miss cd drivers,I do not find the original htc wm6 or wm5 just can not do anything to revive?
johanis1982 said:
The problem is this: was stuck in bootscreen IPL 1.13.0001 SPL 1.13.0000.I tried many ROMs but went only with version 3.13.404.1 nl.Nothing has changed, still stuck with IPL 3.13.0001 SPL 3.13.0000 now.not connect with activesync goes uspl.I miss cd drivers,I do not find the original htc wm6 or wm5 just can not do anything to revive?
Click to expand...
Click to collapse
nice, why the hell are you saying this in my thread?
[Quote = babbelut; 5319483] frumos, de ce dracu vrei să spui acest lucru în thread mea? [/ Quote]
that rarely find someone experienced online i the forum,excuse me but are desperate, I posted elsewhere,
johanis1982 said:
[Quote = babbelut; 5319483] frumos, de ce dracu vrei să spui acest lucru în thread mea? [/ Quote]
that rarely find someone skilled online forum
Click to expand...
Click to collapse
answer to your question: install the official rom first
that dude is posting in each topic that his artemis is bricked also private messages x 10 etc lol
my problem still isn't solved,
a member repaired my rom (don't know how, he said with recmodding in sys-directory) but now I made a new package and the fault is there again...
pls someone explain to me how to use recmodding, how to solve the problem
can someone please help !!!!
babbelut,
y not ask shady?
he is your mentor, he should answer you, if you did'nt understand, just ask him..
afterall he is the one that fixed it for you..
however, ill do a bit of searching for you tonight and if i find anything ill send you the link.
Hi guys. I tried to flash the rom from gionee elife 5.1 on my kazam but after the start process spflash gave me an error and now my phone is dead. Now my pc see them just like alcatel single rndis interface not like before 65xx preloader. Can someone help me? Thanks in advance
Costy88031 said:
Hi guys. I tried to flash the rom from gionee elife 5.1 on my kazam but after the start process spflash gave me an error and now my phone is dead. Now my pc see them just like alcatel single rndis interface not like before 65xx preloader. Can someone help me? Thanks in advance
Click to expand...
Click to collapse
why you tried flash the 4.3 ROM from Gionee elife S5.1??? any other rom is better than that version...
and buddy... i don't know anything about that to help you... maybe you hardbricked your phone =#
--- Updating
on chinaphonearena . com and Here on XDA you can find who to solve this problem... obviously it happens to other branded phones not our specific phone but they have almost same SoC so the problem can be solved almost same way they did... try search more about that problem... what i read until now is about replace the "alcatel single rndis interface" with 65XX preload driver... ;D
Thanks a lot DvDwx. My phone is alive now. Your post help me very much. I going from link to link starded from your link and founded a solution. Here is the link http://forum.xda-developers.com/micromax-a116/help/preloader-mt65xx-visible-device-manager-t2837412
DvDwx. said:
why you tried flash the 4.3 ROM from Gionee elife S5.1??? any other rom is better than that version...
and buddy... i don't know anything about that to help you... maybe you hardbricked your phone =#
--- Updating
on chinaphonearena . com and Here on XDA you can find who to solve this problem... obviously it happens to other branded phones not our specific phone but they have almost same SoC so the problem can be solved almost same way they did... try search more about that problem... what i read until now is about replace the "alcatel single rndis interface" with 65XX preload driver... ;D
Click to expand...
Click to collapse
Great job man!
Sent from my VIVO AIR using Tapatalk
Hi everyone!
I've a trouble, my Galaxy Grand 2 is very strange phone...
I had a lot of problems with root it, but finally Kingo root made it, after that I tried to flash it to CWM or TWRP, but anything couldn't do it.
Worst fact was, that something was wrong with kernel, becouse system had a lot of bugs, it was slow and screen couldn't recognise touch sometimes...
Then I tried some flashers from play store.. anddd.... Nothing didn't happened after this.. but when I turned off device, it stopped reacting to anything.. ANYTHING! XD
It's HARD BRICKED and I don't know what to do..
Ahh.. and when I connected it to computer with MS Win 7, it recognised it as "QHSUSB_BULK", so i installed some drivers and I have now "Qualcomm HS-USB QDLoader 9008 (COM6)"... So I can connect with this, but what kind of programs works with it...
Please for help everyone... :/
First of all go here: https://samsung-firmware.org/model/SM-G7105/ and search ur language and download it, next what u do is download odin 3.07v, then u need flash in on odin, here link for yt how do this : https://www.youtube.com/watch?v=HVLyjeqPtn0 . If i help press "thanks " if u have questions ask! edit: ah , i forgot to ask , u can go download mode?
AiWaNczewski said:
First of all go here: https://samsung-firmware.org/model/SM-G7105/ and search ur language and download it, next what u do is download odin 3.07v, then u need flash in on odin, here link for yt how do this : https://www.youtube.com/watch?v=HVLyjeqPtn0 . If i help press "thanks " if u have questions ask! edit: ah , i forgot to ask , u can go download mode?
Click to expand...
Click to collapse
HARD BRICKED...
There is no recovery or download mode, the phone is absolutely dead...
In the phone I have installed stock, rooted android 4.3 G7105_XXUANF4, but I actually downloaded to computer a newer the software G7105_XXUANAA from this site:
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
I read, that there is a way to unbrick creating an SDC files from firmware using Advance Turbo flasher and uploading them to sd card, but ATF needs 5 MD5 files...
So I found it and I tried to do it, but now I have problems with using ATF... ehhh....
Little update!
When the phone is connected to computer, windows recognises it as "Qualcomm HS-USB QDLoader 9008 (COM6)".
I noticed, that when I hold Vol-, Home and Power buttons for a few seconds, the computer losts contact with this device, then connects again and this cycle repeats about 4-5 times, after that computer losts contact for good and reconnects after removing and inserting battery into a phone...
Boot is dead, but I saw tutorials, where someone uses only a Win32diskImager, unbrick.img file and SDCARD to call download mode...
I created also JIG but it's also not working...
Mr.Spirit said:
When the phone is connected to computer, windows recognises it as "Qualcomm HS-USB QDLoader 9008 (COM6)".
I noticed, that when I hold Vol-, Home and Power buttons for a few seconds, the computer losts contact with this device, then connects again and this cycle repeats about 4-5 times, after that computer losts contact for good and reconnects after removing and inserting battery into a phone...
Boot is dead, but I saw tutorials, where someone uses only a Win32diskImager, unbrick.img file and SDCARD to call download mode...
I created also JIG but it's also not working...
Click to expand...
Click to collapse
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
AiWaNczewski said:
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
Click to expand...
Click to collapse
Właśnie widziałem wersję dla G7102, ale dla LTE chyba nie ma...
Może da się stworzyć w jakiś sposób plik do debrick'owania? W jakiś sposób musi się dać...
Może założę nowy thread typu:
Anyone know how to create debrick image for android devices??
Dzięki za pomoc
Thanks for every help!
Mr.Spirit said:
Właśnie widziałem wersję dla G7102, ale dla LTE chyba nie ma...
Może da się stworzyć w jakiś sposób plik do debrick'owania? W jakiś sposób musi się dać...
Może założę nowy thread typu:
Anyone know how to create debrick image for android devices??
Dzięki za pomoc
Thanks for every help!
Click to expand...
Click to collapse
( piszę po angielsku bo chyba bana można wyłapać, ale tak swoją drogą ktoś na 7105 szukał unbricku i jakiś dev nad tym pracował szukam właśnie tego wątku)
AiWaNczewski said:
( piszę po angielsku bo chyba bana można wyłapać, ale tak swoją drogą ktoś na 7105 szukał unbricku i jakiś dev nad tym pracował szukam właśnie tego wątku)
Click to expand...
Click to collapse
Ok, that's good news
Mr.Spirit said:
Ok, that's good news
Click to expand...
Click to collapse
Ah, and u can create thread on "Cyanmod . pl " (polish forum) , many ppl on this forum had g7105 and can help. On XDA 7105 is not very support cause LTE version only for Europe , still i will search for help u but its gonna be hard to find :/
AiWaNczewski said:
Ah, and u can create thread on "Cyanmod . pl " (polish forum) , many ppl on this forum had g7105 and can help. On XDA 7105 is not very support cause LTE version only for Europe , still i will search for help u but its gonna be hard to find :/
Click to expand...
Click to collapse
Ok, thank you.. then I'm gonna post there and if something will help I will write a new thread about this
Mr.Spirit said:
Ok, thank you.. then I'm gonna post there and if something will help I will write a new thread about this
Click to expand...
Click to collapse
Okay , i add u to friends on XDA accept if u can and message if something change with phone
OK! Then finally I found service, which operates with JTAG and even this could't help... A servicer said, that some special memory, which Samsung melts into a motherboard is damaged. It can't be changed and only way to repair the phone is changing the motherboard.
Anyway! Thanks for help, most thanks for AiWaNczewski
For any questions... you can ask me..
No problem bro :\ thanks for wrote
Sent from my SM-G7105 using XDA-Developers mobile app
I want to hardbrick my friend phone how to you do it
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
And i know how to unbrick it
AiWaNczewski said:
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
Click to expand...
Click to collapse
i had an grand 2 lte version thx to adyita my phone is hard bricked can u help me fix?
Btw im on a budget so service center is not an option
honghongleong said:
i had an grand 2 lte version thx to adyita my phone is hard bricked can u help me fix?
Btw im on a budget so service center is not an option
Click to expand...
Click to collapse
Flash stock rom by odin in download mode
Sent from my SM-G7105 using XDA-Developers mobile app
AiWaNczewski said:
Flash stock rom by odin in download mode
Click to expand...
Click to collapse
My pc was unable to detect the phone
honghongleong said:
My pc was unable to detect the phone
Thx to adytiarom
Click to expand...
Click to collapse
adityarom works
Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me
tommasobertoldi said:
Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me
Click to expand...
Click to collapse
I'm in the same boat :/ any advances?
Same problem. we haven't stock rom for sp flash toll. Fastboot rom and update rom not work.
Arkadaşlar bir konuda yardıma ihtiyacınız var. LE TV S3 x622 Model Telefona imei yazmak ve rom yüklemek için twrp işlemleri yaparken brick oldu. Şuan Pcye bağlayınca bir mediatek usb port, bir preloader usb vcom olarak sürekli bağlanıp kopuyor. Netice itibariyle telefon brick oldu ve spflashtoll romunu bulamıyorum yardımcı olabilir misiniz?