My Galaxy Tab 4.7.0 stopped working when I tried to erase an app. So I have Team Win Recovery installed. At first I though it was a firmware issue so I had it flashed. Then I realized every time I reboot or power off it says, "No OS Installed." I must have erased it when I used factory reset. So what can I do?
Sam B. said:
My Galaxy Tab 4.7.0 stopped working when I tried to erase an app. So I have Team Win Recovery installed. At first I though it was a firmware issue so I had it flashed. Then I realized every time I reboot or power off it says, "No OS Installed." I must have erased it when I used factory reset. So what can I do?
Click to expand...
Click to collapse
You are dealing with a "bug" common/specific to TWRP
boot into TWRP and use the format data option to correct your data partition, before you do that though,
run adb and pull any important files from internal storage.
m
moonbutt74 said:
You are dealing with a "bug" common/specific to TWRP
boot into TWRP and use the format data option to correct your data partition, before you do that though,
run adb and pull any important files from internal storage.
m
Click to expand...
Click to collapse
That didn't work. I still get the "No OS Installed!" Is there a way to install the operating system from somewhere?
Sam B. said:
That didn't work. I still get the "No OS Installed!" Is there a way to install the operating system from somewhere?
Click to expand...
Click to collapse
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
thisisapoorusernamechoice said:
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
Click to expand...
Click to collapse
That was the first thing I did. It didn't work. I guess I could try it again.
Sam B. said:
That was the first thing I did. It didn't work. I guess I could try it again.
Click to expand...
Click to collapse
Copy ODIN log , please .
repey6 said:
Copy ODIN log , please .
Click to expand...
Click to collapse
This is what the log stated:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230NUUEU0AOC1_T230NUXAR0AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
thisisapoorusernamechoice said:
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
Click to expand...
Click to collapse
Sorry for replying so late, I've been busy. I tried to flash again and still no luck. It also says the device isn't rooted, could that be the problem why the flash isn't working? I tried to
re-root, but that's not working. I do not know what else to do.
Sam B. said:
This is what the log stated:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230NUUEU0AOC1_T230NUXAR0AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
Click to expand...
Click to collapse
This is not the entire log file
repey6 said:
This is not the entire log file
Click to expand...
Click to collapse
That's all that was on the log page.
Sam B. said:
That's all that was on the log page.
Click to expand...
Click to collapse
This is full right log file
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> param.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
For example
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
repey6 said:
This is full right log file
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> param.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
For example
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
What version of Odin are you using? Because when I connect my tablet, all that's stated is was I had posted before, nothing else. But after reading what is suppose to logged, it may seem the system and everything else was wiped and or corrupted. The tablet starts up to the first screen, and just stays there. A few things I forgot to mention was; at one point when I connected the tab to my laptop, it open the storage which was recognized as Dalvik, or something like that. And this whole situation took place when I installed an app called Freedom. I tried to get rid of it, but Google Play refused to let me login. So I factory reset. It could also be the app Lucky Patcher too. I tried to modify the Google Play to try and see if it would fix the login issues. And I ended having to uninstall the current version of Play to an earlier version.. So I'm at a loss on what to do. I'm might end up getting a new one if there are no other solutions.
My Galaxy Tab 4 (US Cellular), model SM-T537R4 will NOT enter 'download' mode in the usual way (On+VOL-). It simply ignores this and boots into the US Cellular screen, then boots as normal.
Is there any way to access download mode, other than the ON + Vol- method?
[email protected] said:
My Galaxy Tab 4 (US Cellular), model SM-T537R4 will NOT enter 'download' mode in the usual way (On+VOL-). It simply ignores this and boots into the US Cellular screen, then boots as normal.
Is there any way to access download mode, other than the ON + Vol- method?
Click to expand...
Click to collapse
You have to hold ON + Vol- + Home button (all three)
Sam B. said:
What version of Odin are you using? Because when I connect my tablet, all that's stated is was I had posted before, nothing else. But after reading what is suppose to logged, it may seem the system and everything else was wiped and or corrupted. The tablet starts up to the first screen, and just stays there. A few things I forgot to mention was; at one point when I connected the tab to my laptop, it open the storage which was recognized as Dalvik, or something like that. And this whole situation took place when I installed an app called Freedom. I tried to get rid of it, but Google Play refused to let me login. So I factory reset. It could also be the app Lucky Patcher too. I tried to modify the Google Play to try and see if it would fix the login issues. And I ended having to uninstall the current version of Play to an earlier version.. So I'm at a loss on what to do. I'm might end up getting a new one if there are no other solutions.
Click to expand...
Click to collapse
At first you must to install USB drivers on your PC http://developer.samsung.com/technical-doc/view.do?v=T000000117#none .
Then go to download mode on your device .
Then connect to PC and install your firmware via Odin . ( this instruction how install firmware via Odin , for example :
http://www.sammobile.com/firmwares/download/45899/T230XXU0AOC1_T230ITV0AOC2_ITV/ ).
Second variant : restoring firmware with Kies .
Is there a CyanogenMod update I can flash to a Galaxy Tab 4 (US Cellular), model SM-T537R4 (rooted) using Odin? With TWRP?
[email protected] said:
Is there a CyanogenMod update I can flash to a Galaxy Tab 4 (US Cellular), model SM-T537R4 (rooted) using Odin? With TWRP?
Click to expand...
Click to collapse
Unfortunately I don't think there are any custom roms compatible with your tablet model available yet. Sorry
Although, thanks, did not know about your model number. Will be added to my firmware collection ASAP
Yeah I'm blushing writing this message. It turns out, you're suppose to press the start button on odin to see if the firmware is compatible; I think. Then press again to install it. Wow! I'll admit, I never was never that computer-savvy, but DAMN! This is a new low for me.
Please Update this Problem
Hi Sam, Please let me know if you fixed your problem. I Think I have the same situation. My computer does Not recognize the Galaxy Tab 4. I can put the Tab into download but....computer does not see the tab. Help Please???!!!! Thanks Harold
Sam B. said:
Yeah I'm blushing writing this message. It turns out, you're suppose to press the start button on odin to see if the firmware is compatible; I think. Then press again to install it. Wow! I'll admit, I never was never that computer-savvy, but DAMN! This is a new low for me.
Click to expand...
Click to collapse
Related
Hi all,
Phone is soft bricked, I cant access the recovery, but can access the odin download mode.
The phone came with I337mvluamg1 firmware, Although when i try to reflash the phone with the stock firmware odin fails..
Im using Odin 3.07
And the I337MVLUAMG1 firmware from sammobile but i get this message from odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is day 4 with the phone soft bricked and it just wont budge, ive tried multiple different firmware versions, even back tracking. but nothing.
Any tips? suggestions?
Thanks
sdawg1010 said:
Hi all,
Phone is soft bricked, I cant access the recovery, but can access the odin download mode.
The phone came with I337mvluamg1 firmware, Although when i try to reflash the phone with the stock firmware odin fails..
Im using Odin 3.07
And the I337MVLUAMG1 firmware from sammobile but i get this message from odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is day 4 with the phone soft bricked and it just wont budge, ive tried multiple different firmware versions, even back tracking. but nothing.
Any tips? suggestions?
Thanks
Click to expand...
Click to collapse
Im now getting a pass from I337MVLUAMDJ in odin, but the phone still wont boot to recovery or the OS
Odin back to stock. Don't use what's in my description.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Make sure your trying to flash the same version of firmware.... if the phone was originally on 4.3 you can't flash back to 4.2. You can go up versions but not down... if the bootloader is 4.3 you can't get to 4.2
I tried flashing the stock firmware but it failed, but when i use a version above stock i get a pass from odin, the phone resets but when boots, gets stuck on the samsung galaxy s4 screen, and wont boot to recovery..or the OS....
sdawg1010 said:
I tried flashing the stock firmware but it failed, but when i use a version above stock i get a pass from odin, the phone resets but when boots, gets stuck on the samsung galaxy s4 screen, and wont boot to recovery..or the OS....
Click to expand...
Click to collapse
You need to keep trying to get into recovery. When you do, do a factory reset
Sent from my Nexus 5
I have an SCH-i545 S4. It was running Jelly Bean 4.3 at the time rooted using Super SU and still have TWRP recovery.
I was trying to install the new lollipop update manually and forgot to switch from stock to a ROM slot in TWRP recovery and wiped the stock ROM.
I try to use Odin to flash stock firmware and revert to unrooted, but I get the following error: (I am able to get phone into download Odin mode)
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Using Odin 3.09 and trying to flash :
ALL_I545VRUEMK2_I545VZWEMK2_1937946_REV06_user_low_ship_MULTI_CERT.tar
Not sure if I'm using the wrong stock firmware and Odin version.
Let me know what I'm doing wrong thank you!
You can't flash older firmwares.
Odin 3.09 worked fine for me in the past, buy it doesn't hurt to try a different version.
Also, use the back USB ports if you have a pc.
Try different USB cables and windows versions too. Odin is quite picky.
My setup was Windows 7 x64 Pro with Odin 3.09. Using the back USB and original cable I never had an issue flashing stuff with Odin.
GDReaper said:
You can't flash older firmwares.
Odin 3.09 worked fine for me in the past, buy it doesn't hurt to try a different version.
Also, use the back USB ports if you have a pc.
Try different USB cables and windows versions too. Odin is quite picky.
My setup was Windows 7 x64 Pro with Odin 3.09. Using the back USB and original cable I never had an issue flashing stuff with Odin.
Click to expand...
Click to collapse
So I should be flashing the latest lollipop firmware vs. the older kit kat or jellybean?
odin is failing when flashing aboot.mbn because the rom has a bootloader that is older than the bootloader on the phone.
Flashing a stock LP or kk should work if the phone was running a stock 4.3 rom.
audit13 said:
odin is failing when flashing aboot.mbn because the rom has a bootloader that is older than the bootloader on the phone.
Flashing a stock LP or kk should work if the phone was running a stock 4.3 rom.
Click to expand...
Click to collapse
Alright I tried what you said and started to flash the following file: I545VRUGOC1_I545VZWGOC1_VZW
Here is the data from Odin 3.09 and the process failed again:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions? Working with Windows 10 and original samsung cord.
Strange. Boot into recovery and look at the second or third line for the recovery version on the phone.
audit13 said:
Strange. Boot into recovery and look at the second or third line for the recovery version on the phone.
Click to expand...
Click to collapse
So booting into download gives the following:
Odin Mode
Product name: SCH-I545
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: Off
CSB-CONFIG-LSB: 0x30
Secure Download: Enabled
Write Protection: Enabled
eMMC Burst Mode enabled
Can the phone be booted into recovery?
audit13 said:
Can the phone be booted into recovery?
Click to expand...
Click to collapse
Trying... Maybe not anymore???... Giving me the software update fail screen
Sounds reasonable since recovery is probably gone.
This is the verizon version of the phone? Have you tried using the original USB cable as previously suggested, a different USB port, or operating system?
audit13 said:
Sounds reasonable since recovery is probably gone.
This is the verizon version of the phone? Have you tried using the original USB cable as previously suggested, a different USB port, or operating system?
Click to expand...
Click to collapse
Just got his while trying this OS on a different USB port.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
angelfury126 said:
Just got his while trying this OS on a different USB port.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Just got it to PASS!!!! YES!!!. Plugged into the back usb ports.
Now the problem is it won't boot up... Thoughts?
It is completely dead? Did you get the firmware from sammobile.com?
audit13 said:
It is completely dead? Did you get the firmware from sammobile.com?
Click to expand...
Click to collapse
Don't think so. I'll download and try again.
All official firmware is on sammobile.com.
The phone will go to download mode?
audit13 said:
All official firmware is on sammobile.com.
The phone will go to download mode?
Click to expand...
Click to collapse
Yes.
angelfury126 said:
Just got it to PASS!!!! YES!!!. Plugged into the back usb ports.
Now the problem is it won't boot up... Thoughts?
Click to expand...
Click to collapse
I told you right from the beginning to use the back USB ports.
Anyway, did you wipe before flashing the firmware? Cuz Odin will not do it for you.
have you tried flashing different versions of the rom?
When flashing, did you try unchecking everything except f.reset time? When it finishes flashing, power off the phone by removing the USB cable and then the battery. Replace the battery and boot directly to recovery to perform a factory wipe, then reboot to the rom.
audit13 said:
power off the phone by removing the USB cable and then the battery.
Click to expand...
Click to collapse
Or you can just hold the power button for a couple of seconds until it turns off
That will work too but I find removing the battery to be easier for me.
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
dylistn said:
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
Click to expand...
Click to collapse
You're in the wrong place. These are the S4 forums, not Note 4.
Anyway, AT&T devices have a locked bootloader and I don't think CF-Auto-Root can root those.
So you may have to find another solution to rooting.
But before that you may have to flash the stock firmware again, as the current one is messed up by the failed root flash.
Thank you
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
dylistn said:
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
Click to expand...
Click to collapse
It can be moved. Select the report option and as a reason select thread moving.
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
I treid to Root a T-Mobile version
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
dylistn said:
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
Click to expand...
Click to collapse
This method for n910t
1,Flash twrp recovery in odin
2,Boot into twrp by pressing volume up+home+power buttons together.
3,flash supersu.zip latest version from twrp
Your phone may reboot couple of times so don't freak out its normal.
Thats it
You will have permanent root and your device will boot fine.
Twrp recovery below
https://mega.nz/#!DIFFVSpQ!bUCEAa-VRdkeT4VgMJ-4cUXuo-ZiYbihOSWiw6Ic_wo
Supersu below
https://mega.nz/#!XAsUjARJ!XqYZkle6wTarq1a8-zAnhwrbd4IdpzpJryNCAU3g9k4
Dont try this on AT&T it will not work and you may brick your device.
Thanks Dubai. But I did some thing wrong! On step 1 above Odin log file:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Anyone have a stock firmware for the T-mobile Galaxy Tab E T377T? I rooted without making a Nandroid backup and then uninstalled some system apps and broke something. Thanks!
I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares
I found it here for your device: http://updato.com/firmware-archive-select-model?record=1059DC7F613411E69A56FA163EE8F90B
and here for mine: http://updato.com/firmware-archive-select-model?record=14ABF2135BCD11E6B055FA163EE8F90B
Let me know if this works for you! I haven't had a chance to try it on mine yet
**UPDATED LINKS**
T337T: https://www.androidfilehost.com/?fid=745425885120714656
T377A: https://www.androidfilehost.com/?fid=817550096634752785
Kingofspades2957 said:
I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares
Click to expand...
Click to collapse
I flashed the file from my previous post using Odin and it worked great! I recommend you try that!
Tab E T377T stock firmware
Is there any way you could send me a mirror for the T337T firmware the website is not working.
snake5564 said:
Is there any way you could send me a mirror for the T337T firmware the website is not working.
Click to expand...
Click to collapse
Try this link again. I just checked it and it worked for me. http://updato.com/firmware-archive-select-model?record=AD35E725DDA911E69215FA163EE8F90B
You just have to wait 120 seconds for it to let you start the download.
When i try to download it it says too many users have viewed or downloaded this file recently.
snake5564 said:
When i try to download it it says too many users have viewed or downloaded this file recently.
Click to expand...
Click to collapse
Yeah, I just saw that. I might have it saved on my computer at home and I'll upload it someplace for you this evening if I do.
thank you
snake5564 said:
thank you
Click to expand...
Click to collapse
Here you go: https://www.androidfilehost.com/?fid=745425885120714656
jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.
usman3206 said:
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.
Click to expand...
Click to collapse
Thanks a lot, your provided links worked perfectly and my device is now alive and working immaculately.
jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
louiedee279 said:
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
Click to expand...
Click to collapse
how do i download the file?
Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.
tmwight said:
Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.
Click to expand...
Click to collapse
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.
jdon723 said:
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.
Click to expand...
Click to collapse
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
tmwight said:
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
jdon723 said:
Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
Click to expand...
Click to collapse
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
tmwight said:
---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
Click to expand...
Click to collapse
jdon723 said:
After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
Click to expand...
Click to collapse
Ok, Odin passed it again and I've rebooted into recovery before booting and I'm in TWRP right now. Now what do I need to do?