Database Users

[KERNEL][Oxygen/Stock/MIUI] Mono Kernel (31 October)

Mono Kernel for OnePlus 3 (oneplus3)​
Let's start this off with the basic and regular warning and disclaimer :
Code:
#ifdef IF_YOU_FLASH_THE_KERNEL
* No one except you chooses to flash this kernel, this is your [B]own[/B] choice
* Do not flash this if you expect stability that equals to a stock kernel
* Neither me or XDA is responsible if the kernel destroys your device
* No cats are harmed during the creation of this kernel
#endif
Mono Kernel is a kernel made with simplicity and customizations in mind, I never wanted a kernel with gazillions of "bloaty" features (governors, schedulers, etc) that gives me uneasiness since there's too many choices to be made.
Technical details :
If you want to know about the toolchain and stuff I used
- Compiled with UberTC 4.9.4
- No new experimental compilers used (this means, no GCC 5, 6, or 7 until they are well-tested enough)
- Little to no weird optimizations flags, I'll avoid adding -Ofast, -O3, Graphite or anything related to them
Features :
Some bits of features that you'll see
- blu_active governor
- FIOPS, SIOPLUS, and Zen I/O scheduler
- Toggleable Fsync
- UKSM 0.1.2.3 (Ultra KSM, an improved KSM)
- zRAM support
- doubletap2wake and sweep2wake support for non-Oxygen / Hydrogen system
- sweep2sleep support
- Mini-bits of somewhat-safe (but not necessarily stable) optimizations
- Lots of updates and upstream works from various sources (CAF, Google, and Linux)
- And probably more
Bugs :
- WiFi doesn't work on OOS3.2.6
- None, at least for now
Download :
Get it while fresh!
AndroidFileHost Folder
Installation :
Please read all of this before continuing
- I mean... you probably know how
- Just flash the zip
Compatibility List :
Check if your ROM is compatible
- Fully working on FreedomOS & OP3Lite
- Tested on MIUI8 (thanks to lekzzz for testing and reporting it here!)
- Tested on HydrogenOS (thanks to Mostafa Wael for testing, full reports here!
- Anything based on the recent OxygenOS should work
Credits :
All these talented people deserves a cookie
(In no order)
- flar2
- eng.stk
- faux123
- franciscofranco
- anarkia1976
- neobuddy89
- myfluxi
- Grarak
- ##W4TCH0UT##
- Evolutionzz & Dims_Camper (some nice friends to talk)
- Mostafa Wael for being a nice buddy and tester (and just being patient with me in general)
There's too many people that deserves to be here, if you're one of them (in case I somehow forgot to credit you here and on the source code / Git repo page), please, don't hesitate to PM me!
Notes :
- Mono Kernel will always remain on 'testing' phase, mostly because I tend to screw up and break stuff, so I don't warrant any stable release, unless otherwise mentioned
- No, there is no CM builds planned, I have no plan to switch to CM
- Based on a report, MIUI should work with Mono
- Yes, DASH is working, I don't know why I have to mention it, but some people likes to be assured, I guess
XDA:DevDB Information
Mono Kernel, Kernel for the OnePlus 3
Contributors
F4uzan
Source Code: https://github.com/F4uzan/mono_oneplus3
Kernel Special Features: Uh... it's downloadable ?
Version Information
Status: Testing
Created 2016-08-07
Last Updated 2016-10-31

FAQ (Frequently Asked Questions)
Q : I want "x" and "y" feature to be added in this kernel
A : Sure thing, I'll give no promises it'll be added, but if I find it interesting (and usable), why not?
Q : Hey, can you fix "x" issue ? (if you provides no log or details whatsoever)
A : Please, give me more details, how can I reproduce the issue on my side ? If I'm unable to reproduce the issue then can you please provide more details to the issue ?
Q : What logs are needed to give you an exact information of my issue ?
A : /sys/fs/pstore/console-ramoops, dmesg, and any kind of kernel logs (not logcat) you can find
Q : Will this work on "x" ROM ?
A : Probably, it might or might not work, test it out by yourself. Anything based on Hydrogen or Oxygen should work on this kernel
Q : Is it safe to flash over other custom kernel ?
A : Yes, Mono doesn't modify the ramdisk of the previous kernel, however, this might cause the settings sticked to the ramdisk by previous kernel to persist, do this at your own risk.

Reserved
Reserved #1

Another kernel wow

Thanks for the kernel...
Στάλθηκε από το ONEPLUS A3003 μου χρησιμοποιώντας Tapatalk

Thanks dev
Enviado desde mi ONEPLUS A3003 mediante Tapatalk

No overclock? Sad!!!

Nice to see a new kernel

No "another kernel"
isoladisegnata said:
Another kernel wow
Click to expand...
Click to collapse
It's not "another kernel". It's The Mono Kernel!

gautamhans1 said:
It's not "another kernel". It's The Mono Kernel!
Click to expand...
Click to collapse
Please xplain

Wow will we get saosp too
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

isoladisegnata said:
Another kernel wow
Click to expand...
Click to collapse
Is that sarcastic?! Hope not!
Sent from my OnePlus3 using XDA Labs

yijinsa said:
Wow will we get saosp too
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
I might try building it eventually, but Oxygen OS has been serving me finely, so I see no reason to switch.
jason387 said:
No overclock? Sad!!!
Click to expand...
Click to collapse
It will come, I'm just making sure the kernel isn't totally broken on day one release.
isoladisegnata said:
Another kernel wow
Click to expand...
Click to collapse
Thanks? I totally did not sense a sarcastic remarks coming out of those words /s

No dash??
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

evanxyj said:
No dash?
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, I mean, I don't know why I forgot to write it, but since it's based on OxygenOS' kernel, and since the source code for DASH is out weeks ago, yes, DASH is there.

F4uzan said:
Well, I mean, I don't know why I forgot to write it, but since it's based on OxygenOS' kernel, and since the source code for DASH is out weeks ago, yes, DASH is there.
Click to expand...
Click to collapse
Fantastic! I'll try it in days. Hhhhhhhhhh
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

Thank you! Sioplus is my favourite then fiops If you like the idea you could make it Synapse compatible! Thanks again

Alright, a quick update to the kernel, this doesn't bring out many new features (since I don't really know what to add, really), but it's an update nonetheless.
Changes:
* (Actually) add SIOPLUS
* Added KCAL v2 (post-processing control for display)
* Some upstream works to match android/kernel_common/tree/android-3.18
* Small code changes
Now, the reason why SIOPLUS is added is because it was missing in the previous release, I added SIO and originally wanted to type "SIO" in the OP. But... since I lazily copy-pasted the OP from my older kernel thread, I forgot to change SIOPLUS to SIO.
But now, SIOPLUS is actually there!
Download : https://www.androidfilehost.com/?fid=24591000424953255

_MartyMan_ said:
Thank you! Sioplus is my favourite then fiops If you like the idea you could make it Synapse compatible! Thanks again
Click to expand...
Click to collapse
Synapse compatibility has been lingering me for ages, I'll try adding it since it's way more flexible than Kernel Adiutor, but it might take awhile.

@F4uzan is there anyway to use aroma so i can get the frequencies to stick, b/c i like to underclock, also is there a way to add bluactive govenor, thank you

[KERNEL] [CANCRO] [CM14] GasL

DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Feature:
Just DT2W (by vasishath), 2 extra power state (268mhz and 2649mhz{MI4 only}) and gpu overclock.
There are some kernel version, one with just DT2W, one with also CPU and GPU OC
The OC versions may not work on your device, as oc is different for every phone.
If the oc kernel boots fine it can be unstable, you can increase cpu voltage (!DANGER) to get more stability with Kernel auditor, with that app you can also disable gpu oc and downvolt cpu power states.
Download here http://forum.xda-developers.com/devdb/project/?id=17692#downloads
XDA:DevDB Information
GasL Kernel, Kernel for the Xiaomi Mi 3
Contributors
ronfante, Dr. Ramm
Source Code: https://github.com/Ronfante/android_kernel_xiaomi_cancro
Kernel Special Features: DT2W
Version Information
Status: Testing
Created 2016-11-05
Last Updated 2016-11-06

Reserved

So... thx u i flattered.... can u ask me why u partly remove faux sound here?
btw u forget to say thx vasishath for dt2w

Dr. Ramm said:
So... thx u i flattered.... can u ask me why u partly remove faux sound here?
btw u forget to say thx vasishath for dt2w
Click to expand...
Click to collapse
I don't need it
You are right, I'm still updating the thread. :angel:

thanks for your work can you support MIUI please ?

ronfante said:
I don't need it
Click to expand...
Click to collapse
so then better revert faux sound commit

harris123424 said:
thanks for your work can you support MIUI please ?
Click to expand...
Click to collapse
Maybe I'll try something when miui with android N will be relased
Dr. Ramm said:
so then better revert faux sound commit
Click to expand...
Click to collapse
Nice advice

nice work , glad to see a custom kernel
通过我的 MI 3W 上的 Tapatalk发言

Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.

working pretty fine in mi4w, let's see how it behaves the rest of the day, thanks!
Enviado desde mi MI 4 mediante Tapatalk

ronfante said:
Maybe I'll try something when miui with android N will be relased
Mi3/Mi4 will not update N version MIUI...It will take MIUI 9 with marshmallow..
Click to expand...
Click to collapse

saurabhirsee said:
Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.
Click to expand...
Click to collapse
Same here! Mi3w.

saurabhirsee said:
Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.
Click to expand...
Click to collapse
Pallmalli said:
Same here! Mi3w.
Click to expand...
Click to collapse
I've a Mi4 and I forgot to edit the touch driver for Mi3, I've uploaded the mi3 version on download. Now it should works fine, let me know if you try.

ronfante said:
I've a Mi4 and I forgot to edit the touch driver for Mi3, I've uploaded the mi3 version on download. Now it should works fine, let me know if you try.
Click to expand...
Click to collapse
Touch is working fine now.... Gpu oc present ...cpu oc not included for mi3w....
Charging rate is slow on Cm14.1 (by shivam kumar jha) i.e. limited to 700mA though in ampere app... maximum USB current is now shown as 2A as compared to others that sow 1.5mA
Rest all good..... got 59k+ score on antutu
See if u could do something for charging rate or correct me if it is a ROM bug and not the kernel (i thought so as i got different rate on every kernel)

saurabhirsee said:
Touch is working fine now.... Gpu oc present ...cpu oc not included for mi3w....
Charging rate is slow on Cm14.1 (by shivam kumar jha) i.e. limited to 700mA though in ampere app... maximum USB current is now shown as 2A as compared to others that sow 1.5mA
Rest all good..... got 59k+ score on antutu
See if u could do something for charging rate or correct me if it is a ROM bug and not the kernel (i thought so as i got different rate on every kernel)
Click to expand...
Click to collapse
Good, yes on mi3 there is only an extra p state with undervolt and deep sleep undervoltage.
I don't know, mine is charging at 950mA with a stadart 1000mAh charger.

[KERNEL] redkancut-7x [6.x/7.x/MIUI][04-Aug-17]

Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi, I am totally noob, not a developer
There is nothing special with this kernel
My project is only adding some features into the CM based kernel source, features that I like and I want to share with people here
Credit is not mine, all of the credits are belong to many developers out there who deserved
redkancut kernel :
- Based on lineageos kernel source for cancro
- Compile with UBER Toolchain GCC 7.x
- Fast Charging
- Add CPU Clockspeed 268 MHz
- Add GPU Clockspeed 27 MHz
- ElementalX CPU Governor by @flar2
- ZZMoove CPU Governor by @zanezam
- Intellim CPU Governor by @faux123
- Barry_Allen CPU Governor
- Smartmax CPU Governor
- InteractiveX CPU Governor
- Pegasusq CPU Governor
- Alucard CPU Governor and Hotplug by @alucard_24
- AutoSMP Hotplug
- Thermal driver by @franciscofranco
- Faux sound by @faux123
- Adreno Idler
- KCAL Driver by @savoca
- Add sio, sioplus, vr, and zen i/o scheduler
- Enable some TCP Congestion Algorithm (illinois, lp, vegas, veno, westwood)
- Frandom based on http://www.billauer.co.il/frandom.html
- Add doubletap2wake and sweep2wake by @vasishath (use s2w version)
- Some little optimization
Credits :
@Dr. Ramm as mentoring me from the scratch
@linuxxxx
many other developers out there
DOWNLOAD
redkancut
DT2W version for MI3 download here
Don't like my work?
No problem at all ​
XDA:DevDB Information
redkancut, Kernel for the Xiaomi Mi 3
Contributors
travarilo
Source Code: https://github.com/travarilo/android_kernel_xiaomi_cancro/tree/7x
Kernel Special Features: Nothing Special
Version Information
Status: Stable
Created 2016-11-06
Last Updated 2017-08-04

Finally shared here:
My review overall stable. I use this on : RR, beanstalk 6 & 7, and many others. Some aosp i forgot booted and no wifi trouble.

Finally new kernels coming.. Thanks dude

Thanks for your work! Can you support MIUI please?

Nice work man

harris123424 said:
Thanks for your work! Can you support MIUI please?
Click to expand...
Click to collapse
I was stuck with wifi module..

travarilo said:
I was stuck with wifi module..
Click to expand...
Click to collapse
Can you ask for help by vasishath?

Don't know why i am having slow internet speed after flashing this
Edit: Sorry it was something wrong with my LAN

Please add OC and UC.

touch not working on my mi3.. using the one with double tap to wake
rom using crdroid 7.1

the kernel name is so epic! :laugh::laugh:
gonna try this one with the latest beanstalk ROM

Akishima said:
the kernel name is so epic! :laugh::laugh:
gonna try this one with the latest beanstalk ROM
Click to expand...
Click to collapse
Yeah only Indonesian knows the meaning. Salam kancut gan.:good:

travarilo said:
I was stuck with wifi module..
Click to expand...
Click to collapse
Zeurionx had two kernel versions, one with WiFi module and one without. Maybe you can try to inspect the kernel? Thanks for your effort anyways.
Sent from my MI 3W using Tapatalk

touchscreen is dead with the latest BS 7.1 version. flashed the DT2W one.

I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14

Mr.C11 said:
I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14
Click to expand...
Click to collapse
Aint nitrogen based on aosp 7.0/7.1? This work perfectly on cm13/14 based rom though.

SnajperKRS said:
Please add OC and UC.
Click to expand...
Click to collapse
I didn't find many advantages from this, but let's see..
jellyfeels said:
touch not working on my mi3.. using the one with double tap to wake
rom using crdroid 7.1
Click to expand...
Click to collapse
1immortal said:
touchscreen is dead with the latest BS 7.1 version. flashed the DT2W one.
Click to expand...
Click to collapse
may you guys check this one https://www.androidfilehost.com/?fid=457095661767112374
and please give me any feedback
stratosk21 said:
Zeurionx had two kernel versions, one with WiFi module and one without. Maybe you can try to inspect the kernel? Thanks for your effort anyways.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
yup, I never stop trying, hope I'll get flashlight..
Mr.C11 said:
I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14
Click to expand...
Click to collapse
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..

Last night i have installed the zero version on my Beanstalk 7.1. (Mi4w). No problems until now.

travarilo said:
I didn't find many advantages from this, but let's see..
may you guys check this one https://www.androidfilehost.com/?fid=457095661767112374
and please give me any feedback
yup, I never stop trying, hope I'll get flashlight..
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..
Click to expand...
Click to collapse
i already try the test kernel. still not working for me.. even after i change to aicp 12.1

travarilo said:
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..
Click to expand...
Click to collapse
Reflashed it again, I will if failure appears

[KERNEL][MIUI/6.x/7.x] Apollo Kernel for Cancro [5 May]

Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
So guys let me introduce my self. I'm not a developer, I'm just a noob and just started learning about android a month ago.
Now I want to share my project to you which is based on @ssasin.monish 's source, thanks to him for letting me use his source.
I'm only adding some features that I like, and I hope you like it too
Credit is not mine, all of the credits are belong to many developers out there who deserved
Features
Based on @ssasin.monish 's kernel source
Kernel updated with latest 3.4.x linux version
Compiled with UBERTC 5.3
Enable adreno_idler by default
Various minor kernel tweaks
KCAL Driver by @savoca
Alucard Hotplug by @alucard_24
Doubletap2wake and sweep2wake by @vasishath
2 extra power state (268mhz and 2649mhz{MI4 only}) by @ronfante
Additional governors : Abyssplugv2, adaptive, alucard, bioshock, dancedance, darkness, hyper, impulse, lazy, lionheart, nightmare, ondemandplus, optimax, pegasusq
Additional scheduler : bfq, deadline, fifo, noop, row, sio, tripndroid, vr, zen
And more to come (read changelog)
DOWNLOAD KERNEL ZIP
Rom Tested
CM14.1, RR 5.8.0, Mokee 7.1, Nitrogen OS, Slim7, DU 11, CM13
Credits to developers:
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
@ssasin.monish, @ronfante, @vasishath, @travarilo, @linuxxxx, @STRYDER~007 and everyone else who helped me out.
(PM if i missed out someone)
XDA:DevDB Information
Apollo, Kernel for the Xiaomi Mi 3
Contributors
farchanrifai, http://github.com/farchanrifai/Foxy
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2017-01-09
Created 2016-12-07
Last Updated 2017-04-02

Changelog
Code:
28-04-2017
- Skymo
- "A lot of changes"
02-04-2017
- OSS Camera HAL support (Thanks to @vasishath)
- Remove some cpu gov
- Add zzmoove & smartmax_eps
- Add Intelliplug
- KCAL support
- Enable some Congestion Algorith
- Kernel Power Suspend
- Add Input boost support
- Adreno Idler
- Remove CPU UC & OC
- Remove dt2w & s2w
- Minor changes & Upstream LOS changes
09-01-2017
- Rebranded to Apollo
- Used ronfante's source as base
- Make alucard as default hotplug
- Enable adreno idler
- Add msm_hotplug by myfluxi
- Add intelli_thermal_v2 by [user=3332811]@faux123[/user]
- Include latest CM changes
21-12-2016
- Upstream changes (hotspot fix)
19-12-2016 19.16
- Enable some TCP congestion : illinois, lp, reno, vegas, veno, westwood
- Additional governors : blu_active, zzmoove, intellim, elementalx, yankactive
- Set westwood as default
- Minor kernel tweaks
07-12-2016 19.16
- Updated download link
- Added no-dttw version
07-12-2016 13.00
- Initial release

Finally, you share here. Congrats

Great :good:

Can u add a version without dtw and stw plz

latest Nitrogen OS, touchscreen doesn't work

tjahjo.djoko said:
Finally, you share here. Congrats
Click to expand...
Click to collapse
@ssasin.monish said:
Great :good:
Click to expand...
Click to collapse
Thank you :fingers-crossed:
reality1234 said:
Can u add a version without dtw and stw plz
Click to expand...
Click to collapse
Sure, I'm working on it. Will share it here on sunday/monday maybe
Edit:no-dttw version is up. Enjoy!
1immortal said:
latest Nitrogen OS, touchscreen doesn't work
Click to expand...
Click to collapse
what device? Mi 3 or Mi 4 ?

farchanrifai said:
Thank you :fingers-crossed:
Sure, I'm working on it. Will share it here on sunday/monday maybe
what device? Mi 3 or Mi 4 ?
Click to expand...
Click to collapse
Mi3, sorry for not stating that

1immortal said:
Mi3, sorry for not stating that
Click to expand...
Click to collapse
+1 touchscreen doesn't work on my Mi3 either.

1immortal said:
Mi3, sorry for not stating that
Click to expand...
Click to collapse
Please wait, I'm making a new build, I will pm u when it's ready

reality1234 said:
Can u add a version without dtw and stw plz
Click to expand...
Click to collapse
No-dttw version is up, I've updated the download link. Enjoy :fingers-crossed:

any progress with the d2tw and a Mi3 screen issue ?

farchanrifai said:
No-dttw version is up, I've updated the download link. Enjoy :fingers-crossed:
Click to expand...
Click to collapse
Thanks a lot sir
Edit: Sir the link is taking me into the login page Plz check the link

Hello @farchanrifai Unfortunately i can't download the file. Have to log in on androidfilehost. After I have logged in there is a message that the access is denied!
Thx!

reality1234 said:
Thanks a lot sir
Edit: Sir the link is taking me into the login page Plz check the link
Click to expand...
Click to collapse
ydd0ras said:
Hello @farchanrifai Unfortunately i can't download the file. Have to log in on androidfilehost. After I have logged in there is a message that the access is denied!
Thx!
Click to expand...
Click to collapse
Link updated. I'm sorry, my bad

Any plan for mi4 android 6.0 miui rom?
Sent from my MI 4W using Tapatalk

farchanrifai said:
Link updated. I'm sorry, my bad
Click to expand...
Click to collapse
Many thanks. I have flashed the no dttw version on my Mi4w, but it won't start anymore. Any idea?
Sent from my MI 4W using XDA-Developers mobile app

Mi3 screen death
Waiting for new release.

ydd0ras said:
Many thanks. I have flashed the no dttw version on my Mi4w, but it won't start anymore. Any idea?
Click to expand...
Click to collapse
Power off and wait for 5 min . so that it cools down a bit then start your phone..I know it sounds weird but I got it working on latest nitrogen os.. Phone actually shuts off when temp increases

reality1234 said:
Power off and wait for 5 min . so that it cools down a bit then start your phone..I know it sounds weird but I got it working on latest nitrogen os.. Phone actually shuts off when temp increases
Click to expand...
Click to collapse
Wow, that's it. I didn't think about it. And my device was really hot after I have performed a nandroid backup before flashing the kernel. Just flashed it again without problems. It seems very good on first sight. Using alucard. Very nice, many thanks.
Sent from my MI 4W using XDA-Developers mobile app

[DISCONTINUED][KERNEL][Rosy][Oreo/Pie] THUNDERSTORM ⚡️- 1st October

Hello People.
Compatibility:
All My Build Will Be Compatible For OREO/PIE
Download:
Choose From my GDRIVE Folder
Android [OREO/PIE]:Click Here To Download
Installation:
Flash the zip in From Your Recovery!
Features:
1 - Awesome battery life
2 - Flash & Dont forget to Tune Features From Kernel Auditor.
3 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
4 - Gaming Features Introduced! There is a Slight HEAT.
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Good Bye For Now! And Before Leaving And Flashing the kernel Kindly Read the below Posts
XDA:DevDB Information
THUNDERSTORM, Kernel for the Xiaomi Redmi 5
Contributors
MoonWayStar, franciscofranco, And all The Other Kernel's
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2018-10-01
Created 2018-10-01
Last Updated 2019-01-30

Thunder-Storm-V1.1 Released [November 7th]
- Linux version 3.18.124
- Android 8.1 Oreo & 9.0 Pie support
- Significantly improved performance & battery life
- Latest Android Binder
- Wake boost driver
- sdFAT filesystem (supports ext4, vFat and others too)
- Wake gestures
- Fingerprint sensor boost driver [FPC]
- WireGuard VPN support
- Qnovo charging driver for maintaining temperature
- USB Fastcharge
- Works in both AOSP/LineageOS based ROMs
- Governors : Impulse,BioShock,LionHeart,Despair,Elementalx,Lion Fish and Nightmare
- Added latest DTS Eagle driver
- Gaming Optimization's
- Spectrum Support
- And a Lot More !
[V1.1] Download-https://www.androidfilehost.com/?fid=11410932744536996329
Credits
Revanth [ME]
FrancoKernel
Murali
And If u Like my Work Do Give A Thanks!
Want to Give Some Tip?
[PAYPAL]= [email protected]
If Someone Wants to Donate in [PAYTM] Ping Me on @revantht[Revanth]

Reserved

Danke!

Wow! Nicee
MoonWayStar said:
mod edit: whole OP quoted
Click to expand...
Click to collapse
Great bro! And welcome to XDA... And bro hope u guys release stable Oreo soon! So we can flash this kernel!

Gggggrrreeat!

Yes!!rosy alive

Wew:3 #rosystillalive

Bro help me to tweak the kernel to get the great battery backup along with performance. Share your profile of kernel auditor... Please...

MoonWayStar said:
mod edit: whole OP quoted...
Click to expand...
Click to collapse
If i flash this on oreo, then flash nougat rom, will it work? Do i need to get stock kernel then? How?

Everytime I try to download 1.1 ver. it says that this is a virus and it doesn't let me to save this file. I already tried on different browsers. I never had any similar problems with other kernels

karolak-33 said:
Everytime I try to download 1.1 ver. it says that this is a virus and it doesn't let me to save this file. I already tried on different browsers. I never had any similar problems with other kernels
Click to expand...
Click to collapse
Download directly into the phone.

is it need rooted device ?
is it need rooted device ?

radudluffy said:
is it need rooted device ?
Click to expand...
Click to collapse
No. Just need twrp.

karolak-33 said:
Everytime I try to download 1.1 ver. it says that this is a virus and it doesn't let me to save this file. I already tried on different browsers. I never had any similar problems with other kernels
Click to expand...
Click to collapse
Be careful using this Kernel (Thunderstorm kernel from Revanth).
It has some bugs like battery drains with no solutions.
In the other hand, the developer manages a telegram group where he and its admins insult users. Very bad support.
I think it's so dangerous to install a kernel come from annoying people and a bad developer wjo doesn't know all the bugs his kernel brings.
Try Code-x kernel for ROSY.

xDoge said:
Danke!
Click to expand...
Click to collapse
Dope

Wew! Thanks
AP hacker said:
Great bro! And welcome to XDA... And bro hope u guys release stable Oreo soon! So we can flash this kernel!
Click to expand...
Click to collapse
Enjoy the Thunder

rapgod said:
Gggggrrreeat!
Click to expand...
Click to collapse
:good:

ConeSRB said:
Yes!!rosy alive
Click to expand...
Click to collapse
Xenomorph #A said:
Wew:3 #rosystillalive
Click to expand...
Click to collapse
Yeah It's Still Alive

SNOW- said:
If i flash this on oreo, then flash nougat rom, will it work? Do i need to get stock kernel then? How?
Click to expand...
Click to collapse
As i clearly mentioned Only for Oreo/Pie