Database Users

[GUIDE][EASY] How to install CM10!

Hi
This should be an really easy Tuturial how to install Cyanogenmod 10 (Android 4.1.2) on your XPERIA arc S.
Requirements:
A XPERIA arc (S) with unlocked bootloader!
Flashtool (flashtool.net)
Fastboot and Flashmode Drivers - get them in Flashtool folder /drivers.
Go to https://sites.google.com/site/projectfreexperia/ and press Download at the right side. Then choose CM10 and download the newest version.(anzu=Xperia arc (S))
Choose the newest version (e.g. FXP244) and download the file ending with -anzu.zip
Copy the file on the sdcard of your device and on the desktop of your computer.
Download http://goo.im/gapps/gapps-jb-20121011-signed.zip and also push it on the sdcard.
Extract the zip on the desktop (e.g. using 7zip) and open the new folder. You just need the file boot.img
Open flashtool and press the flash in the left corner.
Choose fastboot mode. - PICTURE
Move the flashtool windows that you can see both, the flashtool and the Fastboot toolbox.
Press "Reboot into fastboot mode (via ADB)" - PICTURE
The led of your mobile will light blue and Flashtool will show "Device connected in fastboot mode"
Press "Select kernel to flash" and choose the file boot.img you extracted at step 5.
In the flashtool window it should show OKAY. - PICTURE
Press "Reboot device into system" in the Fastboot toolbox. You can close the fastboot toolbox now.
The device will reboot. Start hitting the backbutton when the FXP logo appears. Hit the key often until the recovery appears. - PICTURE
Use the volume buttons to navigat to mounts and storage und press the home key to choose it. Format /cache, /data and /system in this menu.
Go back (using the back key) and press "install zip". choose the zip file you pushed on the sdcard at step 3.
This will take a minute.
Do this again with the gapps file from step 4.
Go back and choose reboot.
You now have to wait a minute, then you can set up your device running CM10. A smooth and fast ROM!
Tip: Try these: http://forum.xda-developers.com/showthread.php?t=2519275
Any tips to make this guide better. Post it here or PM me!
Greets and don´t forget to say thanks if it helped.
py

He u said for gapps repeat from step 4 but there is no boot img in gaaps.
I was read in other forum i wana just go in cwm recovrry n install from zip select gapps.zip n install...
Is it Right?
Please telll me clearly for gapps.
Plz.
Sent from my Xperia Arc S using xda app-developers app
---------- Post added at 01:33 AM ---------- Previous post was at 01:29 AM ----------
Can i install cm10.2?
I just downloaded it from legacy xperia..
Sent from my Xperia Arc S using xda app-developers app

cm10.2
@ dharmx
Yes you can install 10 2. My arc s is running the cm10 2, jb 4.3.105 Beanstalk rom .
Kernel ; 2DarkAnzu kernel.
Everything working nicely.

dharmx said:
He u said for gapps repeat from step 4 but there is no boot img in gaaps.
I was read in other forum i wana just go in cwm recovrry n install from zip select gapps.zip n install...
Is it Right?
Please telll me clearly for gapps.
Plz.
Sent from my Xperia Arc S using xda app-developers app
---------- Post added at 01:33 AM ---------- Previous post was at 01:29 AM ----------
Can i install cm10.2?
I just downloaded it from legacy xperia..
Sent from my Xperia Arc S using xda app-developers app
Click to expand...
Click to collapse
extract boot imag from rom zip not gapp zip

papayayoghurt said:
Hi
This should be an really easy Tuturial how to install Cyanogenmod 10 (Android 4.1.2) on your XPERIA arc S.
Requirements:
A XPERIA arc (S) with unlocked bootloader!
Flashtool (flashtool.net)
Fastboot and Flashmode Drivers - get them in Flashtool folder /drivers.
Go to freexperiaproject.com and choose Cyanogenmod 10 at the left side.
Choose the newest version (e.g. FXP244) and download the file ending with -anzu.zip
Copy the file on the sdcard of your device and on the desktop of your computer.
Download http://goo.im/gapps/gapps-jb-20121011-signed.zip and also push it on the sdcard.
Extract the zip on the desktop (e.g. using 7zip) and open the new folder. You just need the file boot.img
Open flashtool and press the flash in the left corner.
Choose fastboot mode. - PICTURE
Move the flashtool windows that you can see both, the flashtool and the Fastboot toolbox.
Press "Reboot into fastboot mode (via ADB)" - PICTURE
The led of your mobile will light blue and Flashtool will show "Device connected in fastboot mode"
Press "Select kernel to flash" and choose the file boot.img you extracted at step 5.
In the flashtool window it should show OKAY. - PICTURE
Press "Reboot device into system" in the Fastboot toolbox. You can close the fastboot toolbox now.
The device will reboot. Start hitting the backbutton when the FXP logo appears. Hit the key often until the recovery appears. - PICTURE
Use the volume buttons to navigat to mounts and storage und press the home key to choose it. Format /cache, /data and /system in this menu.
Go back (using the back key) and press "install zip". choose the zip file you pushed on the sdcard at step 3.
This will take a minute.
Do this again with the gapps file from step 4.
Go back and choose reboot.
You now have to wait a minute, then you can set up your device running CM10. A smooth and fast ROM!
Tip: Try these: http://forum.xda-developers.com/showthread.php?t=2519275
Any tips to make this guide better. Post it here or PM me!
Greets and don´t forget to say thanks if it helped.
py
Click to expand...
Click to collapse
I just tried to install cm 10 on Arc S mobile...
It's bootloader is unlocked & rooted...
but when I try to connect it in flashboot mode & In flashtool Press "Reboot into fastboot mode (via ADB) ,
It show error that "This action needs a connected device in ADB mode"
what I have to do to flash boot.img ?
I attached 2 screenshots of connecting & error....
device is connected in flashmode , I also attached blue noti. LED pic which on when connect...
How I connect device & flash boot.img ???
In advance thank you...

Blue LED indicates fastboot mode. In that case, just use Select Kernel to flash, pick the kernel file and flash it.

Someguyfromhell said:
Blue LED indicates fastboot mode. In that case, just use Select Kernel to flash, pick the kernel file and flash it.
Click to expand...
Click to collapse
ok. Thanx for reply. I will do that...
But why it is showing ADB error when I click "reboot into fastboot mode (via ADB) ??

Tech-G.ONE said:
ok. Thanx for reply. I will do that...
But why it is showing ADB error when I click "reboot into fastboot mode (via ADB) ??
Click to expand...
Click to collapse
No idea to be honest.

Tech-G.ONE said:
ok. Thanx for reply. I will do that...
But why it is showing ADB error when I click "reboot into fastboot mode (via ADB) ??
Click to expand...
Click to collapse
Enabled usb debugging?
Sent from my MT11i using Tapatalk 2

Attitude.SSJ said:
Enabled usb debugging?
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
ya.... I forgot to mention but usb debugging , unknown apk options are enabled.
Then also this error is occurring...
Even installed all drivers...

Working! How to root Tablet Z 10.4.B.0.577 [for UNLOCKED BOOTLOADER only]

Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at: http://download.chainfire.eu/351/
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
[Files uploaded again, change 001.boot.zip to boot.zip.001 and do the same to 002 unzip]

This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot

pangiotis24 said:
This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot
Click to expand...
Click to collapse
For Locked bootloader, the only working method atm is here http://forum.xda-developers.com/showthread.php?t=2588442, the files needed for all XTZ models ( 351,321,311,312) are there now

Unlock/Root/Relock BL
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?

Attached files ?
Xyam said:
Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at:
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
Click to expand...
Click to collapse
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.

Installing SuperSU
Xyam said:
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
.
Click to expand...
Click to collapse
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.

TheRealAlexei said:
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.
Click to expand...
Click to collapse
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?

Vaggelis AsKyE said:
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?
Click to expand...
Click to collapse
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly

TheRealAlexei said:
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly
Click to expand...
Click to collapse
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!

Vaggelis AsKyE said:
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!
Click to expand...
Click to collapse
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data

TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??

TheRealAlexei said:
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.
Click to expand...
Click to collapse
Sorry just realized that XDA did not allow .001 and .002. Please download them again, change 001.boot.zip to boot.zip.001 and do the same to 002 to unzip. Alternatively you can download CM10.2 and extract the boot.img from the zip.

Vaggelis AsKyE said:
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??
Click to expand...
Click to collapse
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"

Vaggelis AsKyE said:
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?
Click to expand...
Click to collapse
i was thinking the same idea. but will only do that if i have a hardware issue and need repair at sony repair center

[/COLOR]
Xyam said:
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"
Click to expand...
Click to collapse
I chose shut down from the menu and the bar is loading. After a while tablet freezes and after 10-15 seconds tablet goes off

ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?

Mr0czny said:
ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?
Click to expand...
Click to collapse
if u flash boot.img with flashtool u will get custom recovery (CWM) installed!!!

Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help

strung3 said:
Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help
Click to expand...
Click to collapse
Hello,
At this guide u flash boot.img from CM10.2 ROM (Step 3). At the end you have to reflash the new firmware so the boot, kernel etc change, because if u stay with CM10.2 u will get bootloops!!

Vaggelis AsKyE said:
If you unlock bootloader you can't use music info download and Bravia engine also. Although, I unlocked my bootloader and I followed your guide rooting successfully my Xperia Tablet Z SGP311 with .577 firmware. I used the latest flashtool to unlock the bootloader!!
When I finished all the process of rooting the music info didn't work so I tried to relock the bootloader with flashtool!! I did and guess what!! I have root with locked bootloader, stock firmware and working music info download!!!
You can make a guide that everyone with his own ftf can root his device just unlocking and locking the bootloader!!
The process must be done strictly with flashtool cause it keeps the keys for the relock!!!
Click to expand...
Click to collapse
Question: if you unlock the bootloader with Sony tools do you loose the music download info and the Bravia engine ????????

Rooting SGP321 Stock 10.5.A.0.230 and adding Recovery

Hi everyone
First of all I'm in no way a DEV, all files and tools in this post is made by various DEV and a big thanks goes to all of them for there great work.
All I've done is combining them to get the desired end result. I take no responsibility for any damage that might happend by following this guide.
Prerequisite:
1. SGP321 with stock 10.5.A.0.230 Locked Bootloader(unlocking instruction here) or do it from Flashtool To relock Bootloader once done, repeat this step.
1. Download SuperSU flashable
2. Download and extract the boot.img from CM11
3. Installed fastboot (part of the Android SDK)
Steps:
1. Copy UPDATE-SuperSU-v1.99.zip to SD card on the tablet.
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Copy the boot.img to the same folder as the fastboot.exe
4. Open a console(Command prompt) where the fastboot.exe is located
Type.
fastboot flash boot boot.img
fastboot reboot
5. Keep pressing Vol+ for a few times it boots up
6. Flash UPDATE-SuperSU-v1.99.zip from recovery
7. Power off the device
8. Put Tablet in Flash mode by holding volume down key while plugging in the usb cable.
9. Flash SGP321_10.5.A.0.230 R1D_Custom GENERIC.ftf via Flashtool
10. Boot up and you will have the SuperSU installed
Optional install recovery
Install Busybox
Connect Tablet to pc while powered on download the Recovery
Extract the content and run the install.bat .

Thanks for sharing!!

Nice! I can confirm that this works well even with SGP351. The best thing about this method is that it doesn't wipe anything, if you don't want to. Awesome find, OP!

Does this work without an SD card?

nemrih said:
Does this work without an SD card?
Click to expand...
Click to collapse
Yes just place the files on the device memory instead.

DELETE ME! EDIT/DELETE Where's the DELETE?

DELETE ME/// Totally messed up

......
Didn't unlock bootloader...Doh! (couldn't make out from the description if it was to be unlocked before the steps or not)

Getting boot loop!!!
Sent from my VGN-NS10J_S using XDA Free mobile app
Must have messed it up trying earlier...Done and dusted
Sent from my VGN-NS10J_S using XDA Free mobile app

I'm getting bootloop as well. How did you fix it?
ecksdeeay said:
Getting boot loop!!!
Sent from my VGN-NS10J_S using XDA Free mobile app
Must have messed it up trying earlier...Done and dusted
Sent from my VGN-NS10J_S using XDA Free mobile app
Click to expand...
Click to collapse

will_w said:
I'm getting bootloop as well. How did you fix it?
Click to expand...
Click to collapse
Fixed by Sony PC Companion ('Fix my Tablet' which just re-flashed the stock fw) after the struggle of stopping the loop.
Sent from my VGN-NS10J_S using XDA Free mobile app

A bit confused
Prerequisite:
1. SGP321 with stock 10.5.A.0.230 Locked Bootloader(unlocking instruction here) or do it from Flashtool To relock Bootloader once done, repeat this step.
1. Download SuperSU flashable
2. Download and extract the boot.img from CM11
3. Installed fastboot (part of the Android SDK)
So in step 1 above, does the bootloader need to be unlocked? Or does this method work with locked bootloader? I'm sorry, the wording is a little awkward and I would like to know if I need to back up my TA keys prior to attempting this method.
Thanks
audiospeedwagon

audiospeedwagon said:
So in step 1 above, does the bootloader need to be unlocked? Or does this method work with locked bootloader? I'm sorry, the wording is a little awkward and I would like to know if I need to back up my TA keys prior to attempting this method.
Thanks
audiospeedwagon
Click to expand...
Click to collapse
You can root it much easier with Easy Root Tool without messing with bootloader.

{all-in-1 guide} root - recovery - custom rom - kernel- xposed

Well, in this guide I will try to concentrate all the process from a Stock Z3 (D6603) to a fully rooted, unlocked bootloader, custom rom and recovery, modded kernel and xposed firmware.
AS ALWAYS I WONT BE RESPONSIBLE FOR ANY DAMAGE, WAR, OR DEAD UNICORNS. PROCEED ON YOUR OWN RESPONSABILITY
Pre-process drivers:
Get fastboot drivers from here: https://mega.co.nz/#!upQkWCpA!BCvvsQR6Ee1gfmzAAGCeIMmFek2AaM0r_9HGWVNw8tM
Get adb+drivers from here: https://mega.co.nz/#!upQkWCpA!BCvvsQR6Ee1gfmzAAGCeIMmFek2AaM0r_9HGWVNw8tM
Z3 Official Drivers from here: https://mega.co.nz/#!v8JkkZAQ!w9ERWMs0L1UmWf_N3oCT4JgFdfU9NUFT7Wjv7D_bBh0
First of all you need to gain root privileges:
Download stock firmware (FTP format) https://mega.co.nz/#!D5ZXmJKZ!XWD6dae-NwKECGctrFsetFlODcf6EQMMYf22fCPHo2g​Download FlashTool (To flash FTF format) https://mega.co.nz/#!D5ZXmJKZ!XWD6dae-NwKECGctrFsetFlODcf6EQMMYf22fCPHo2g​Download GiefRoot and unpack it https://mega.co.nz/#!yxQFQbzK!KeA0u1i6KwKetj1aAaSLUZ_qiih1N0uox0GGes700J8​Flash the stock firmware using flashtool, click on the bolt, select the FTF file downloaded previously and follow instructions​Note: The screen says press back+plug USB. It is not back button but VOL+ Button​
Now skip configuration process, you will loose it all so it is not necessary but nothing happens if you want to waste your time.​Once skipped go to Settings > About Phone and tap 7 times on Build number to enable developer options.​Under developer options enable Usb Debugging and Mock Locations​Now, in settings enable unknown sources and disable verify apps ​Put your phone in Airplane Mode​Connect your phone to the computer and open the install.bat inside the folder of GiefRoot​Note: Probably a pop-up will show in your phone asking to allow USB debug, check the "Always allow..." and press OK​Now follow instructions on the CMD screen​Note: It will probably fail the first time, just start again from install.bat point​
Now let's install a recovery (it wont be the final recovery because this is changed by installing roms, we will stick on FOTA one. A few steps below.
Download ES File Explorer: https://mega.co.nz/#!j0xxESqT!k1VHSKi86lBgdh8NPbxmb3Q9FKFWDup7gAt-_uWkWCU​Download ZU Recovery: https://mega.co.nz/#!Ll4UVLTS!A8w4NeleaxjXBLQdUbZLtzGZRpPefX71rp27aCNV_mk​Enable root and mount system r/w.​Extract the ZU Recovery and open install.bat​Choose option 1 and follow instructions.​Note: You will have a new App named NDR Utils, use it to reboot the phone.​
Let's backup DRM keys:
Download TA-Backup: https://mega.co.nz/#!v0wgDCRR!xJBrmo1FfdvQQcFzK6ZO4dEfUi1YLaNGEl8XMaKu18s​Extract TA Backup​Run Backup.bat​Keep the file generated well saved.​
Now, we will unlock bootloader:
I won't explain this point, I will recommed you follow this guide from the Official Sony's web: http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/ it is very clear and includes all checks needed.
Now let's install a custom ROM to proceed to FOTA recovery:
Download PacMan custom ROM from here: http://forum.xda-developers.com/z3/development/rom-pac-rom-lp-mr1-beta-1-t3099454​Flash it as usual​Let it boot and proceed to next step​
Now let's install the FOTA recovery:
Download FOTA recovery image: https://mega.co.nz/#!38xxBZZJ!2jwbChc-XFlilltodA7R0VQzQTnbf8EPbUokR38C4Yg​Once the ROM has booted put your phone in fastboot mode:​
Code:
adb reboot fastboot
Or turn it down, hold vol+ and plug the USB.​Then flash the FOTA recovery:​
Code:
fastboot flash recovery <downloaded.img>
Then reboot your phone:​
Code:
fastboot reboot
Now we can proceed to install PacMan ROM again (in case you lost it while flashing FOTA):
Download PacMan custom ROM from here: http://forum.xda-developers.com/z3/development/rom-pac-rom-lp-mr1-beta-1-t3099454
You can use this kernel along this ROM too:
http://forum.xda-developers.com/z3/orig-development/kernel-m5-kernel-t3045319
Get the permissive version in order to allow xposed to run.
xposed: I am testing it right now, I will explain it as soon as I see it is stable.

In your guide you use 'TFT' instead if the correct term of 'FTF'
They are FlashTool Files, hence the FTF

gregbradley said:
In your guide you use 'TFT' instead if the correct term of 'FTF'
They are FlashTool Files, hence the FTF
Click to expand...
Click to collapse
Thank you for the correction. Appreciate it.

im on D6653 and i tried using the root method.... after rebooting, my phone has alot of errors and the home screen is not working. there is nothing on the screen apart from the wallpaper and the 3 soft buttons at the bottom. i can't go to setting. what should i do?

togcbu said:
im on D6653 and i tried using the root method.... after rebooting, my phone has alot of errors and the home screen is not working. there is nothing on the screen apart from the wallpaper and the 3 soft buttons at the bottom. i can't go to setting. what should i do?
Click to expand...
Click to collapse
Flash the stock again and be carefull not not to flash D6603 firmware to D6653.

[GUIDE] Sony Xperia Z5 - UNLOCK / ROOT / TWEAKS - OS 5.1.1 / 6.0

[GUIDE] Sony Xperia Z5
DISCONTINUED - SEE NEWS !
Last update: 20.06.2016​
This guide will help you to root your phone, install new firmwares, unlock your bootloader and much more. Its splitted into 3 sections: StockRom, CustomROM and Tweaks so you should find things easily. I think if you understood this guide you can easily flash different firmwares, kernels and so on. And now - have fun
NEWS
I have to much work to do at the moment to continue this guide. But, the main work is done, now its all about updating the links. If there is something remarkable new, I will add it to my guide.
20.06.2016
- updated links
- minor changes
23.04.2016
- updated download links
- added custom rom (CyanogenMod13)
- some small changes
09.04.2016
- I'm very busy at the moment (exams and hard work). So I cant help you guys that much and cant try new kernels and that kind of stuff Plese ask @gm007 or @zacharias.maladroit if you have problems. I will come back as fast as I can
- updated download links
28.03.2016
- updated download links
12.03.2016
- Android 6.0 compatibility check
- updated download links
- graphical revision
14.02.2016
- updated guide to make it more understandable
QUESTION & ANSWER
Which devices are supported by this guide?
- Sony Xperia Z5
- Model number: E6653 / E6603 (for other models use different kernel)
- OS version: Stock Xperia Android 5.1.1 / 6.0
Whats important to know before I start?
- I´m NOT responsible for any damage.
- Keep in mind that unlocking the bootloader can void your warrenty.
- Save your data, all settings and files will be deleted during this process.
- READ THE ENTIRE GUIDE FIRST!
[GUIDE] GENERAL
FASTBOOT
1) POWER OFF phone
2) Hold VOLUME UP
3) Connect to PC via USB
4) LED turns blue
FLASHMODE
1) POWER OFF phone.
2) Hold VOLUME DOWN
3) Connect to PC via USB
4) LED turns green
RECOVERY
a) You can enter TWRP while booting. If the LED turns yellow, hold VOLUME DOWN till it gets orange.
b) Use this command in Minimalistic ADB and FASTBOOT to reboot to recovery:
Code:
adb reboot recovery
BOOTLOOP / EMERGENCY POWER OFF
1) Hold POWER OFF and VOLUME UP
2) Device vibrates 3 times
DEVELOPER MODE AND UNNOWN SOURCES]
1) settings -> about phone -> touch build number several times
2) settings -> developer options -> enable USB debugging
3) settings -> security -> enable Unknown sources
PC PERMISSIONS
1) Run Minimalistic ADB and FASTBOOT and FLASHTOOL with admin permissions.
2) Use USB 2.0 ports, sometimes 3.0 ports doesnt work.
[GUIDE] StockROM
# BUGS / ISSUES
E6653_32.1.A.1.163
- camera apps (AR Effect,...) do force close
- filesystem (external SD card) does not refresh automatically, so you cant transfer files you copied to sd card via MTP to PC. Solved via restart. --> also on STOCK ROM
# DIRECT DOWNLOAD LINKS
E6653
Kernel
Z5_AndroPlusKernel_Permissive_v30 (for firmware .163 and .185)
Z5_AndroPlusKernel_Permissive_v31 (for firmware .224)
Recovery
twrp-3.0.2-0-E6653-20160417.img
SuperSu
SuperSU (beta but stable)
# DOWNLOAD LINKS
Windows programs
Sony PC Companion
Minimal ADB and Fastboot
Flashtool + patch file
µTorrent (for downloading Flashtool)
Android
AndoPlusKernel
TWRP
# GUIDE
BOOTLOADER STATUS
The bootloader loads the kernel. If unlock isnt allowed, the bootloader will prevent loading a custom kernel.
1) type *#*#7378423#*#* into dialer / phone app
2) service info --> configuration --> rooting status
3) if bootloader unlock allowed says YES, you can continue. If bootloader unlock isnt allowed you CAN NOT root your phone.
INSTALLING PROGRAMS
Flashtool
1) install µTorrent
2) download torrent file from Flashtool website
3) run downloaded torrent file via µTorrent
4) download Flashtool via µTorrent
! You can close and or delete µTorrent now, you will not need it anymore
5) install Flastool
6) open install directory from flashtool and replace x10flasher.jar with new patch
OTHER
1) install all other programs
INSTALL / CHECK DRIVERS
Windows 7 and lower
1) open Flashtool install directory
2) open driver folder
3) run Flashtool-drivers.exe
4) install Flashmode and Fastboot drivers
Windows 8 and higher
1) restart computer with digital driver signature disabled (you have to do this every time you restart your pc)
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2) open Flashtool install directory
2) open driver folder
3) run Flashtool-drivers.exe
4) install Flashmode and Fastboot drivers
! There are no Z5 drivers yet, that’s why you need Sonys PC Companion!
! Flashtool drivers were updated, try the new Z5 drivers before installing Sony PC Companion.
Sony PC Companion
1) run Sony PC Companion
2) connect your Xperia Smartphone
3) wait till it has been detected
4) close Sony PC Companion, you dont need it anymore
ADB driver check
1) enable Developer options and Unknown sources
2) run Minimal ADB and Fastboot
3) type
Code:
adb devices
4) allow dialog on your phone
5) check if your device is shown in command window
fastboot driver check
1) run Minimal ADB and Fastboot
2 put device in FASTBOOT mode
3) type
Code:
fastboot devices
in Minimal ADB and Fastboot
4) check if your device is shown in command window
! When connecting phone in flashmode or fastboot additional drivers will be installed automatically.
! Installing drivers twice can solve problems.
UNLOCK BOOTLOADER
1) open Flashtool
2) click on BLU (Bootloader Unlock)
3) follow the instructions shown by Flashtool
4) you will be forwarded to a Sony website
5) follow the instructions there
6) at the end you will receive a key
7) save this key carefully!
8) enable Enable OEM unlock in developer options
9) copy KEY into Flashtool prompt and click unlock
! You can try to use Flashtool for unlocking first, or continue with step 10.
10) open Minimal ADB and Fastboot
11) your phone has to be in Fastboot mode
12) check if your phone is shown by
Code:
fastboot devices
13) enter the following code:
Code:
fastboot –i 0x0fce oem unlock 0xKEY_FROM_SONY
14) reboot (that can take a long time, so dont worry)
DOWNLOAD XPERIA FIRMWARE - OPTIONAL
If you want to update, upgrade or reset your ROM.
1) open Flashtool
2) click on XperiFirm
3) downloading…..
4) in XperiFirm select your device then choose your preferred firmware (e.g. Z5 --> E6653 ---> Customized DE --> 32.0.A.6.200 R12B)
5) in the right column double click the latest firmware and start download
6) Unpack automatically has to be checked
7) after downloading close download window and XperiFirm
8) now Flashtool should start doing things
! You can identify your phone model by: Settings -->About phone--> Diagnostics
FLASH NEW FIRMWARE - OPTIONAL
If you want to update, upgrade or reset your ROM.
1) in Flashtool click on Flash device and choose your firmware
2) under "Wipe", check all (APPS_LOG, DIAG, SSD, USERDATA)
3) click flash and follow the instructions
4) after successful installation reboot phone (that can take a long time, so dont worry)
! You can flash a new ROM without unlocking your bootloader.
FLASH KERNEL
The kernel has direct control of the hardware.
1) download latest Kernel from download section (AndroPlusKernel is only for E6653 models)
2) extract ZIP
3) put boot.img from zip into your root directory from Minimal ADB and Fastboot
4) put phone into fastboot mode
5) run Minimal ADB and Fastboot and check with
Code:
fastboot devices
6) type in:
Code:
fastboot flash boot boot.img
7) restart phone and look if its working
! If you end up in a bootloop with the LED flashing 3-4 times try to flash Kernel and Recovery again. If this doesnt help, reflash firmware, kernel and recovery.
FLASH RECOVERY
The recovery is something like the boot menu you may know from windows. Its mainly used to install programs and apps.
1) download latest TWRP from download section
2) put twrp.img into your root directory from Minimal ADB and Fastboot
4) put phone into fastboot mode
5) run Minimal ADB and Fastboot and check with
Code:
fastboot devices
6) type in:
Code:
fastboot flash recovery twrp.img
! You can rename twrp image to twrp.img or something shorter if you want.
7) after the first boot - do a reboot into recovery. Otherwise the partitions won't be mounted correctly & flashing will run into trouble. It takes several seconds (or a few minutes) to reboot into recovery - but then you're good to go.
ROOT
Some apps need more permissions than normal. You can compare root with administrator rights on windows.
1) download UPDATE-SuperSU-v2.67.zip
2) copy UPDATE-SuperSU-v2.67.zip to your internal memory
3) enter TWRP
4) click Install
5) navigate through folder structure
6) tap UPDATE-SuperSU-v2.67.zip
7) "Swipe to confirm flash"
8) reboot
RESTORE DRM KEYS
Unlocking the bootloader disables a partition on your phone where software keys are saved. Without this keys xReality, BIONZ, audio processing arent available. This program will restore this features.
! Take a look if xReality is already working before installing DRM keys.
1) download DRM RESTORE (drmrestore.zip) from download section
2) copy drmrestore.zip to your external sd card
3) enter TWRP
4) click Install
5) navigate through folder structure
6) tap drmrestore.zip
7) "Swipe to confirm flash"
8) reboot
! Unfortunately, there is no way to save the original TA partition at the moment.
[GUIDE] CustomROM
# CyanogenMod 13_Alpha for E6653 and E6603
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase
performance and reliability over stock Android for your device.
### XDA Z5_CyanogenMod 13 Link ###
# AromaROM with Installer for Z5 E6853 / E6883 / E6653
AROMA is a custom ROM with nice tweaks, but it has some serious bugs. I used it for 2 month and there are several issues: random reboot, screen turn off during calling and does not turn on again, problems with notification bar, ... .
### XDA ROMAur Link ###
1) install stock lollipop rom
3) for E68xx models install recovery and kernel for your device
4) For E66xx models install twrp-2.8.7.0-E6653-20151130_material.img and kernel for your device
5) copy ROMAur to your external sd card
6) enter recovery
7) make a full wipe (Wipe --> Factory reset)
8) install ROMAur
9) Reboot
[TWEAKS]
XPOSED
ONLY FOR 5.1.1: When you want to install Xposed you have to deodex your system or install an already deodexes ROM. Without this procedure the camera and other apps wont work. Use this guide to solve this: http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
XDA Thread: http://forum.xda-developers.com/showthread.php?t=3034811
1) download xposed-v85-sdk23-arm64.zip and XposedInstaller_3.0_alpha4.apk [Android 6.0 versions]
2) copy xposed-v79-sdk23-arm64.zip and XposedInstaller_3.0_alpha4.apk to your internal memory
3) enter TWRP
4) click Install
5) navigate through folder structure
6) tap xposed-v79-sdk23-arm64.zip
7) "Swipe to confirm flash"
8) reboot
9) install XposedInstaller_3.0_alpha4.apk
10) reboot
useful Xposed Moduless
APM+
Xperia / AOSP NavBar Buttons
OGYoutube + OGYoutube Xposed Login Fix
Flat Style Colored Bars
DISABLE SmallApps
SmallApps is that little bar in the overview screen.
1) power on phone
2) unlock your phone (open homescreen)
3) open Minimal ADB and Fastboot
4) type:
Code:
adb shell
pm hide com.sony.smallapp.launcher
pm hide com.sony.smallapp.app.widget
exit
5) after this, type:
Code:
adb reboot
! If you know what youre doing, you can simply delete all the SmallApp stuff via ROOT Uninstaller.

Thanks for quite a nice guide.
I have done rooting on various devices but this seems to be most complicated ever. [emoji14]
Sent from my E6683 using Tapatalk

It has been before this guide. Basically what I did was unlocking the bootloader, booting recovery, flashing kernel, flashing root, wipe, restore DRM fake, done.
Firmware wasn't necessary for me and I've made bad experiences with alternate firmwares / radios and so on in the past.

Hi. Do I have to backup my TA partition ?

there no way to backup your TA partition hopefully for now.

How to increase volume of both speakers
I have rooted z5 but don't know how to edit mixer path.xml

Siudzix said:
Hi. Do I have to backup my TA partition ?
Click to expand...
Click to collapse
Actually there is no need for it, imho. The fake DRM keys are doing a really good job. X-reality back, after picture processing back. It's also currently not possible to backup them afaik.

DeathStroke said:
Thanks for quite a nice guide.
I have done rooting on various devices but this seems to be most complicated ever. [emoji14]
Sent from my E6683 using Tapatalk
Click to expand...
Click to collapse
Mate I see you have Z5 E6683 which is dual sim. Were you able to get your phone rooted using this guide?
Many thanks.

I have XPERIA Z5 Dual Sim (E6633) - will this guide work ?

Siudzix said:
I have XPERIA Z5 Dual Sim (E6633) - will this guide work ?
Click to expand...
Click to collapse
Yes and no. You need a different kernel and mybe recovery. Everything else is the same. I will include a link in my guide if I find a working kernel.

Rooting Z5
Hi all,
Shall i root the phone without unlocking the Bootloader.I dont want to Unlock the bootloader.So please advise me is this root method is work on Locked Bootloader.
Thanks in advance

ramprasaathks said:
Hi all,
Shall i root the phone without unlocking the Bootloader.I dont want to Unlock the bootloader.So please advise me is this root method is work on Locked Bootloader.
Thanks in advance
Click to expand...
Click to collapse
For now, you have to unlock your bootloader to gain root access. There is no other method at the moment. So in conclusion: locked bootloader = no root.

how i root z5 dual 6683

parteek.dandyan said:
how i root z5 dual 6683
Click to expand...
Click to collapse
Follow the guide and do it. Its written there.
Sent from my E6683 using Tapatalk

DeathStroke said:
Follow the guide and do it. Its written there.
Sent from my E6683 using Tapatalk
Click to expand...
Click to collapse
Dont blame him. I added this guide for E6683 today. I cant try it myself because I have no E6683, but I hope it will work

alphatact1cs said:
Dont blame him. I added this guide for E6683 today. I cant try it myself because I have no E6683, but I hope it will work
Click to expand...
Click to collapse
I was not blaming, I didn't know that you updated today. Would be great in future if you do any update, add the date and following update.
Thank you.
One thing I noticed while reading your guide was TWRP is not for E6683. Will there be any problem? I haven't yet tried your guide because I was in doubt.
Sent from my E6683 using Tapatalk

DeathStroke said:
One thing I noticed while reading your guide was TWRP is not for E6683. Will there be any problem? I haven't yet tried your guide because I was in doubt.
Click to expand...
Click to collapse
The new Kernel from monx includes TWRP, so you dont need to flash Recovery...normally. I know that my guide works, but only for E6653. I included a link for E6683, but I also wrote that I cant try it because I havent a Z5 E6683. Anyway, TWRP for E6653 should work for E6683 devices. The main difference is the Kernel.

Guys, what about E6633 ? Is it really bad ?

Siudzix said:
Guys, what about E6633 ? Is it really bad ?
Click to expand...
Click to collapse
You can try it at your own risk. Someone said that it will work, but I would be careful.
pesonic said:
Should this be working on E6633 too?
Click to expand...
Click to collapse
arismelachrinos said:
+1
Click to expand...
Click to collapse

@alphatact1cs are you open to suggestions??
we are currently trying to unify devices index here at xda..
would you like to follow what our fellow brother @kuzibri and @sd_shadow has implemented?
http://forum.xda-developers.com/general/about-xda/public-index-program-project-t3147245