[ruu][lollipop][guide][a5_dug]how to solve red triangle error in stock recovery - Desire 816 General

This is guide is how l am solved this error on my HTC Desire 816 Dual CID HTC_622 but l think this gonna work for most users with unlocked bootloader
IMPORTANT NOTICE:EVERYTHING I WROTE HERE I DONE ON MY PHONE.I AM NOT GONNA BE RESPONSIBLE IF YOUR PHONE GET BRICKED OR SOMETHING LIKE THAT.
1: Make sure you have Lollipop update available for your phone
2: Download update to your phone,update will be placed in Download folder in your phone internal storage.
3: Extract OTA update file on your pc.Open it with WinRar or some other zip\rar extract program.Find file firmware.zip inside and extract it to your pc.How again open file firmware.zip and inside look for recovery.img file and extract it too to your pc
4: How you need to flash extracted recovery.img file via fastboot.Boot phone in bootloader mode and flash new recovery.
5: Relock your bootloader.
6:Reboot your phone now.Again download update for your phone,and try to flash OTA update again:fingers-crossed:
HTC A5_DUG Stock Recovery Mega link: https://mega.co.nz/#!aBkGyRLK!LcRMMPTF7hhaUTUNxJBZ4FJbF3QMhLtWswW1Vxvn2YI

Thank you for your useful tips.
I will try and feedback soon.

Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)

OronDF343 said:
--snip--
Click to expand...
Click to collapse
If anyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)

OronDF343 said:
Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)
Click to expand...
Click to collapse
l know that you dont have to relock bootloader but l want to lock it just to be sure:laugh:

Aimbot91 said:
l know that you dont have to relock bootloader but l want to lock it just to be sure:laugh:
Click to expand...
Click to collapse
I am trying this way so i'll tell you if it works. I hope finally this will work

ctnerdem said:
I am trying this way so i'll tell you if it works. I hope finally this will work
Click to expand...
Click to collapse
Ok:fingers-crossed:

Aimbot91 said:
Ok:fingers-crossed:
Click to expand...
Click to collapse
it gives me this error every time i try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ctnerdem said:
it gives me this error every time i try.
Click to expand...
Click to collapse
Are you used OTA for your deviceMaybe your OTA zip file get corupted?

Yes I used ota for update but I don't understand this error what it means

Aimbot91 said:
This is guide is how l am solved this error on my HTC Desire 816 Dual CID HTC_622 but l think this gonna work for most users with unlocked bootloader
IMPORTANT NOTICE:EVERYTHING I WROTE HERE I DONE ON MY PHONE.I AM NOT GONNA BE RESPONSIBLE IF YOUR PHONE GET BRICKED OR SOMETHING LIKE THAT.
1: Make sure you have Lollipop update available for your phone
2: Download update to your phone,update will be placed in Download folder in your phone internal storage.
3: Extract OTA update file on your pc.Open it with WinRar or some other zip\rar extract program.Find file firmware.zip inside and extract it to your pc.How again open file firmware.zip and inside look for recovery.img file and extract it too to your pc
4: How you need to flash extracted recovery.img file via fastboot.Boot phone in bootloader mode and flash new recovery.
5: Relock your bootloader.
6:Reboot your phone now.Again download update for your phone,and try to flash OTA update again:fingers-crossed:
HTC A5_DUG Stock Recovery Mega link: https://mega.co.nz/#!aBkGyRLK!LcRMMPTF7hhaUTUNxJBZ4FJbF3QMhLtWswW1Vxvn2YI
Click to expand...
Click to collapse
How to Flash the file exactly ??

OronDF343 said:
Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)
Click to expand...
Click to collapse
Thanks for the info. But
How to know which recovery do i have?

OronDF343 said:
If anyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)
Click to expand...
Click to collapse
Worked a charm and saved me a lot of trouble. Thank you very much.
/M

ctnerdem said:
it gives me this error every time i try.
Click to expand...
Click to collapse
I got the same error on my A5-UL when updating the OTA. Tried installing Google Books, but the same error happens.

!!~spearhead~!! said:
I got the same error on my A5-UL when updating the OTA. Tried installing Google Books, but the same error happens.
Click to expand...
Click to collapse
I had a very similar error.
my guess is, because my phone is unlocked and modified using Link2SD and Xposed, there have been changes to the system. so It might be a good idea to flash an untouched 4.4.42 nandroid before trying to update.
That's what I did and I could update without a problem

Stock recovery ?
OronDF343 said:
If anyyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)
Click to expand...
Click to collapse
hello ...........
I'm stuck on STOCK RECOVERY
After extracting OTA file and all that ........ I too got recovery.img file
but i dont understand how to use that file to solve the red triangle issue\
please help me !!

Chary Harish said:
hello ...........
I'm stuck on STOCK RECOVERY
After extracting OTA file and all that ........ I too got recovery.img file
but i dont understand how to use that file to solve the red triangle issue\
please help me !!
Click to expand...
Click to collapse
you copy that recovery.img file to the folder where you keep your ADB/Fastboot files. then you reboot to bootloader and put your device in fastboot mode. then open a command prompt in your fastboot folder on your computer and type:
Code:
fastboot flash recovery recovery.img

unexpected contents
Stucked passed 3 nights trying ,I unrooted my phone than installed custom recovery and tried but it says system/apps/... Has unexpected contents status 7 I don't have nandroid backup can anyone help me my device a5 dug europe

Ali_5don said:
Stucked passed 3 nights trying ,I unrooted my phone than installed custom recovery and tried but it says system/apps/... Has unexpected contents status 7 I don't have nandroid backup can anyone help me my device a5 dug europe
Click to expand...
Click to collapse
the error is because you had modified your old Rom(i,e, definitely uninstalled things from system) so it fails system check. you can find clean unchanged nandroid backups of 1.58.401 on XDA

:good:
seekfind said:
the error is because you had modified your old Rom(i,e, definitely uninstalled things from system) so it fails system check. you can find clean unchanged nandroid backups of 1.58.401 on XDA
Click to expand...
Click to collapse
I tried but can't find a nandroid backup if u have a link than can u post bro I am browsing [http://forum.xda-developers.com/desi...l-sim-t3030958]. Have a look at it! http://forum.xda-developers.com/desire-816/general/fresh-htc-desire-816-a5dug-dual-sim-t3030958 will this work but its cid and myn is europ

Related

[TUTORIAL] How to make OTA update with other recovery

Hello!
I managed to do the OTA update on my HTC Desire 820. The trick is that it replaces the original recovery.
By this method you can also restore the original recovery.
1. Download the OTA Update but do not install.
Go to Options -> About phone -> Software updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Open file explorer and go to Download folder (/storage/emulated/0/Download) and find zip file with update and open it.
3. Open firmware.zip
4. Copy "recovery.img" to sdcard for example.
5. Replace recovery.img
To this step I use "Flashify" app from Google Play.
Run Flashify and select "Recovery image".
Select "Choose a file" and select recovery.img
Select "YUP!" and wait.
Don't restart your device.
6. Install update
Go to Options -> About phone -> Software updates and select "Install now".
Click OK. Now your device install update.
This operation takes a few minutes.
7. Final
Managed to do the OTA update.
If you want you can install other back recovery.
In the event of the emergence of a new update you can do the same.
I hope that helped. Best regards.
I followed this process yesterday, but it's ends with red explanation mark.
Why don't you make it like flashable zip for custom recovery.
Sent from my HTC Desire 820 dual sim
YBS14881 said:
I followed this process yesterday, but it's ends with red explanation mark.
Why don't you make it like flashable zip for custom recovery.
Sent from my HTC Desire 820 dual sim
Click to expand...
Click to collapse
I once had such a situation as you. Helped off the phone (VOL UP + VOL DOWN + POWER) and enable it again.
i cant extract the firmware.zip from the dual sim ota, tried it multiple times but always get the message that its corrupt
it worked
Download winrar to help you extract the firmware. I just followed the procedures yesterdat to install my own update that has been pending for few days. It worked so well, just as it was explained here. I use single sim 820 though.
Thanks to this site.
of course i have tried anything already, nothing works, so weird
I extracted firmware.zip by RAR APP from play store, you can try it.
https://play.google.com/store/apps/details?id=com.rarlab.rar
Sent from my HTC Desire 820 dual sim
help help
Ota update not install plz help boot recovery install ota and stop instantly
I tried but finally installation aborted after red alert mark fr 5-7 minutes
Failed to update OTA update by Flashify
I have done as u told in the tutorial but nothing happens only my phone is restarted and again the same it's rebooted . Please tell us something else to do .
Plz help. Not install ota update fix my problems red Mark error ota update help
It s not working with OTA Lolipop update. Checked. Phone just going restart and that s all.
I had the same problem i'm thinking to lock my bootloader what do u think ?
Sent from my HTC Desire 820 using XDA Free mobile app
I think it could works. Listen. I downloaded stock recovery to my HTC desire 820 single sim with root and twrp rec and use Flash recovery.img. that worked. After this (with stock recovery ) going to download lolipop and tried to install. It start and going good but after few second crashed. I think it schould be bootloader.
Look at this pic
ammarhigh said:
I had the same problem i'm thinking to lock my bootloader what do u think ?
Look at this pic what my phone give me when i tried to flash the zip file
Sent from my HTC Desire 820 using XDA Free mobile app
Click to expand...
Click to collapse
Look at this pic what my phone give me when i tried to flash the zip file
And i locked my bootloader and unrooted but still the same
Narkotyk1990 said:
I think it could works. Listen. I downloaded stock recovery to my HTC desire 820 single sim with root and twrp rec and use Flash recovery.img. that worked. After this (with stock recovery ) going to download lolipop and tried to install. It start and going good but after few second crashed. I think it schould be bootloader.
Click to expand...
Click to collapse
I tried that .I locked bootloader and installed the update but it crashed with red exclamation mark.
Actually that's because you might have "tamper " flag on.
Kartik13 said:
I tried that .I locked bootloader and installed the update but it crashed with red exclamation mark.
Actually that's because you might have "tamper " flag on.
Click to expand...
Click to collapse
What the... Hmmm what now. I m confused Damn. Maybe we use wrong recovery.img cuz got exathly the same crash error. What is this "tamper " flag on ?
Narkotyk1990 said:
What the... Hmmm what now. I m confused Damn. Maybe we use wrong recovery.img cuz got exathly the same crash error. What is this "tamper " flag on ?
Click to expand...
Click to collapse
Boot into bootloader and choose recovery option wait for 30sec or 1 minute for recovery menu to show.
There you can see "<Tamper>" flag.
If not then your system files are unchanged.
Kartik13 said:
Boot into bootloader and choose recovery option wait for 30sec or 1 minute for recovery menu to show.
There you can see "<Tamper>" flag.
If not then your system files are unchanged.
Click to expand...
Click to collapse
Yea i know where is it but What does it mean? Is it security for change software ?

The absolute way to roll back from 513 and 511 to Lollipop

Hi everyone,
Roll Back from 513 to 331 all credit for @chudy_85 check the link here
http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
New edit
Working now on MT7-L09
Thx to pasquyx and Shadow_recruit for testing it on MT7-L09
you should have root on the device
Files you may need:
1- Roll back file (this is the trick)- BOTH MODEL
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- rom B326 for middle east
(MT7-TL10)
LINK
(MT7-L09)
LINK
3- oeminfo file for China (don't worry it will not change the iemi numbers)
LINK
3- FX FILE EXPLORER
https://play.google.com/store/apps/details?id=nextapp.fx
4- FX ROOT ADD
https://play.google.com/store/apps/details?id=nextapp.fx.rr
5- Build.prop file if you device model showing Jazz
(MT7-TL10)
https://mega.nz/#!20QXmKrZ!HYhN_7u0sBc445C_6r6D4ug2HuqdCgM_721ANosUa9g
(MT7-L09) *NEED TO TEST FROM ANY ONE TO CONFIRM IF IT WORKING
https://mega.nz/#!XhxR2BpD!O6xkfX8MR55imidxwNlH9p3r2ugLOYwnM-dheTOQT38
-extract the file what you donloaded for oeminfo on ext sdcard
-open fx file explorer and grant it from SU, go to system root and make sure you mount read-write
-copy oeminfo from the extsdcard to /dev/block/platform/hi_mci0/by name and agree for overwrite, after that select the file and choose security and mark for all "read-write-exec"
-copy custom.bin for extsd to /data then choose security and mark for all "read-write-exec"
-check the country info now by *#*#2846579## if it cn, so you are on the right way
-now make a restart but first you should be on official recovery, if you are not turn off the phone open it again on bootloader and flash the official recovery ten restart
-after restart it should make "optimizing"
-after it finish take the roll back and put it in dload on the extsd
-make a local update ( if you don't have it go to dial and type *#*#2846579#*#* and choose 4)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
I promise you it will success with 100%
then put lollipop rom 326 on dload and make local update
and again I promise you it will success with 100%
-if the device didn't open after 10 mins, flash all files for the 326 by fastboot
Boot
Cache
Recovery
Cust
System
Userdata
-now you have a 326 rom but chines version.
-make root again and replace oeminfo and custom.bin for middle east version here then make a restart
LINK
final step is to make a reset from settings
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Prof1977 said:
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Click to expand...
Click to collapse
Yes, you should have an unlocked bootloader
Sent from my Nexus 5X using Tapatalk
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Prof1977 said:
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Click to expand...
Click to collapse
yes for sure , send to me your mobile details,
device model
iemi 1
S/N
product id
Huawei mt7 l10
Imei:865164220774779
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Prof1977 said:
Huawei mt7 l10
Imei:865164020774772
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Click to expand...
Click to collapse
suspended sorry
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok tkinks no problem
Have anyone tried this on L09?
stepi1 said:
Have anyone tried this on L09?
Click to expand...
Click to collapse
Files here only for TL10
Sent from my Nexus 5X using Tapatalk
Yes, i noticed it. Just downloaded all needed files for L09, i will try later and see what happens.
Tried on l09 but it fails in transition package. downloaded all the files from huawei finnish site. Well, i think i just wait for the complete marshmallow image.
there is something with whatsapp notification, because i don't allways get new message notifications and also usb-debug and hisuite dont work. when i enable usb-debug and connect cable, it won't rise flag about permmisions and computer keeps saying that device is unathorized.
Blue.Ember said:
Hi everyone,
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
*******This Method is tested only on MT7-TL10 (Please don't try the files on this thread on different model number ********
Files you may need:
1- Roll back from lollipop to Kitkat (this is the trick)
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- for me i tired with kitkat rom B119 sp03
LINK
3- extract all file from B119 Sp03 and be ready to flash all of them via (fastboot)
(so may unlock your bootloader and you should have all files for adb and fastboot)
*recovery
*boot
*cache
*cust
*system
*userdata
it's an easy way, no need to change the location or make any special things \\\\\
download the rollback file which I mentioned before, put it on dload on the extSdcard, and make a local update ( if local update not showing for you try a search for HwOUC.zip and flash it with Twrp recovery)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
then put what you want kitkat or lollipop rom ( for me I tried with B119sp03 kitakt and it's fail on 40%)
now enter the bootloader mode and flash all img's for the rom which you tried to flash
after finishing it opne on a stock android, so no issue try a factory reset and everything will be normal after that
Edit (important): to prevent the fail on 5% you should check the location on your device by this code
*#*#2846579#*#*
It should be hw/meafnaf (middle east version)
If it showing "file is not found" try to make a reset from settings>>backup/restore
This is important edit due to the update of B511 is for middle east.....
Click to expand...
Click to collapse
Software install failed after Local Update!
letschky said:
Software install failed after Local Update!
Click to expand...
Click to collapse
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok,Thank you,iám waiting
This is stock recovery for mt7-l09 to back from twrp to stock recovery of b326 5.1.1 in order to install MM.
You can flash stock recovery in fast boot mod if you rooted your device or installed twrp previously:
https://www.dropbox.com/s/ke7xc9ugtiz3zmj/root and stock recovery for mt7 lollipop 5.1.1-1.rar?dl=0
Sent from my JAZZ using Tapatalk
I modified the post again you can try now and it will success
help plzz!!
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
silentflight711 said:
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
Click to expand...
Click to collapse
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
tanx it solved and recovry stock install. but when i wnat to local update roll back it fail in 5% , and i also cheek the location and it of like this : cn !! so what shuld i do now?

[Tutorial] Install TWRP on PRO 5

Hi,
Before all, I am not responsible if your device get bricked or something like this.
So you need to unlock the bootloader before, check this tutorial to do that : http://forum.xda-developers.com/meizu-mx/general/tutorial-unlock-bootloader-meizu-pro-5-t3303127
After that, download the twrp image here : http://forum.xda-developers.com/meizu-mx/general/recovery-twrp-3-0-meizu-pro5-t3349888
Then place the twrp file on your desktop.
Boot you Pro 5 into fastboot mode (Power+Vol down) and connect it to pc.
Launch cmd, and then go to your desktop :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then type this command :
Code:
fastboot flash recovery twrp_pro5.img
If there are no problems, you will get that :
And that's all, now you can boot on TWRP with Power+Vol Up
Perfect! Nice one. Thank you for taking the time to do this. Can't wait to try it out! Now you have TWRP have you tried flashing anything like a custom kernel or something?
amazing
We are can make custom rom stock
I will upload link custom kernel use synapse !!!
29y6145 said:
amazing
We are can make custom rom stock
I will upload link custom kernel use synapse !!!
Click to expand...
Click to collapse
Hi, u'r an expert I see so... do u know a way to unlock BL without wiping my data ? Check my post on unlocking BL topic please
PYCON said:
Hi, u'r an expert I see so... do u know a way to unlock BL without wiping my data ? Check my post on unlocking BL topic please
Click to expand...
Click to collapse
I known
I will upload file kernel and bootloader unlocked
Then you can make rom custom rom then add bootloader unlocker for rom stock
You wil no lost unlock
I hope yo will think of many ideas
PS: I making rom beta G without wipe data , and no lost unlock
Hope will good
SR English my bad
PS: I dont understand....IF you unlock then update FW stock , bootloader will update.and devices will lock...you can not keep data,because downgrade FW
Be careful with flashing zip with TWRP : I have flashed an update (official) with TWRP to see if it works : update flash works but now I can't access to any recovery, just fastboot and system.
Unable to flash any recovery with fastboot, permission denied, locked bootloader after update.
And I can't flash recovery with the Meizu official tool, I get "token sign failed".
So I can't update the phone at all, no official update, nothing because the phone won't boot into recovery.
Great.
toms157 said:
Be careful with flashing zip with TWRP : I have flashed an update (official) with TWRP to see if it works : update flash works but now I can't access to any recovery, just fastboot and system.
Unable to flash any recovery with fastboot, permission denied, locked bootloader after update.
And I can't flash recovery with the Meizu official tool, I get "token sign failed".
So I can't update the phone at all, no official update, nothing because the phone won't boot into recovery.
Great.
Click to expand...
Click to collapse
You need note: If you flash stock rom (no delete bootloader) devices will update bootloader and devices will lock bootloader
If you want flash rom stock or update rom pls delete file
bootloader , dtb ,ldfw,logo.bin,recovery.img,firmware_type,imei.dat,machine_match
and folder META-INF\com\android
Then edit updater-script
good luck
29y6145 said:
You need note: If you flash stock rom (no delete bootloader) devices will update bootloader and devices will lock bootloader
If you want flash rom stock or update rom pls delete file
bootloader , dtb , file_contexts,ldfw,logo.bin,recovery.img,firmware_type,imei.dat,machine_match
and folder META-INF\com\android
Then edit updater-script
good luck
Click to expand...
Click to collapse
Thanks, but now I can't update anything : when I try to boot into recovery, the phone boot into system. Power+Vol.Up doesn't work now, until I flashed the new rom. So I can't update the phone.
toms157 said:
Thanks, but now I can't update anything : when I try to boot into recovery, the phone boot into system. Power+Vol.Up doesn't work now, until I flashed the new rom. So I can't update the phone.
Click to expand...
Click to collapse
you can try
1-root devices
2-use flashfire or flashify flash recovery stock (recovery.img stock in rom stock zip meizu)
good luck
29y6145 said:
you can try
1-root devices
2-use flashfire or flashify flash recovery stock (recovery.img stock in rom stock zip meizu)
good luck
Click to expand...
Click to collapse
Thanks, I can flash official update, but when I try to flash recovery.img (official too) : IOException write failed, Permission Denied.
I have tried to flash the update with the unlocked bootloader : works, but the bootloader won't get unlocked.
Thanks for the help.
29y6145 said:
Then edit updater-script
Click to expand...
Click to collapse
This may be useful to flash, on stock recovery, an UPDATE.ZIP with only the unlocked bootloader ?
29y6145 said:
You need note: If you flash stock rom (no delete bootloader) devices will update bootloader and devices will lock bootloader
If you want flash rom stock or update rom pls delete file
bootloader , dtb ,ldfw,logo.bin,recovery.img,firmware_type,imei.dat,machine_match
and folder META-INF\com\android
Then edit updater-script
good luck
Click to expand...
Click to collapse
how to edit updater-script? can you post the edited one for us please?
$or$ said:
how to edit updater-script? can you post the edited one for us please?
Click to expand...
Click to collapse
file bootloader unlocked
https://drive.google.com/file/d/0B1JX0MSsEt63dkdtc05PZkZTSHc/view?usp=sharing
29y6145 said:
file bootloader unlocked
https://drive.google.com/file/d/0B1JX0MSsEt63dkdtc05PZkZTSHc/view?usp=sharing
Click to expand...
Click to collapse
Still have it :
http://forum.xda-developers.com/showpost.php?p=66126212&postcount=105
I've tried to flash it in fastboot. No way...
PS If u wish to create a ZIP file with unlocked BL, I think u've to add on BOOT.IMG too...
PYCON said:
This may be useful to flash, on stock recovery, an UPDATE.ZIP with only the unlocked bootloader ?
Click to expand...
Click to collapse
I will upload file rom with bootloader unlock
use stock recovery flash
may be tomorow
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
PYCON said:
Still have it :
http://forum.xda-developers.com/showpost.php?p=66126212&postcount=105
I've tried to flash it in fastboot. No way...
PS If u wish to create a ZIP file with unlocked BL, I think u've to add on BOOT.IMG too...
Click to expand...
Click to collapse
file zip but need twrp
https://drive.google.com/file/d/0B1JX0MSsEt63QzBtMG9IV3FPcUk/view?usp=sharing
29y6145 said:
file bootloader unlocked
https://drive.google.com/file/d/0B1JX0MSsEt63dkdtc05PZkZTSHc/view?usp=sharing
I will upload file rom with bootloader unlock
use stock recovery flash
may be tomorow
Click to expand...
Click to collapse
Maybe it'll be better to find a way to flash ONLY the unlocked BL, without to reflash the entire rom again ?!
29y6145 said:
file zip but need twrp
https://drive.google.com/file/d/0B1JX0MSsEt63QzBtMG9IV3FPcUk/view?usp=sharing
Click to expand...
Click to collapse
Let me understand... I've to unlock BL in order to flash TWRP... with which I can unlock BL ?! Naaaa, there's a way to unlock it flashing only 3 files ( bootloader + dtb + boot.img ) by stock recovery, we have to discover how and find this way :highfive:
PYCON said:
Maybe it'll be better to find a way to flash ONLY the unlocked BL, without to reflash the entire rom again ?!
Let me understand... I've to unlock BL in order to flash TWRP... with which I can unlock BL ?! Naaaa, there's a way to unlock it flashing only 3 files ( bootloader + dtb + boot.img ) by stock recovery, we have to discover how and find this way :highfive:
Click to expand...
Click to collapse
ok iam thingking
Sent from my MI 5 using Tapatalk
Saw this on htcmania and I'm wondering, are these guys taking credit for this TWRP?
http://www.htcmania.com/showthread.php?t=1162470
Also great work, lads. Please don't stop what you're doing. This could make or break owning a PRO 5
Perhaps I've another way to unlock the BL without losing rom, data, etc. Only 2 lines in fastboot.
If someone wants to try..
PYCON said:
Perhaps I've another way to unlock the BL without losing rom, data, etc. Only 2 lines in fastboot.
If someone wants to try..
Click to expand...
Click to collapse
Keep in mind that looked bootloader will ALWAYS check file signature .... which mean only official or resigned file will apply correctly... Unlocked one is less critical and you can flash rom (zipped) with deleted/changed bootloader or recovery img
Why don't you simply use titanium backup first ? Then unlock bootloader, flash recovery, install whatever rom build you want and root+ restore ? This way you won't have spend 2 days for an AIO solution that might never be available

***Edited: Important update*** Anyone managed to ROOT P10+ (VKY-AL00C00)?

Bootloader is open but TWRP is giving ERROR1 when trying to flash Root, and also is unable to mount any partition...
Any help from someone who managed?
***Important Update!*** I am almost sure the problem is with Huawei shipping the P10/P10Plus with different storage chips.
Myself unfortunately got the eMMC chip + LPDDR4 memory. This is why TWRP is unable to mount any partition since the .fstab is different.
I have a working TWRP I ported myself which I was able to rebrand with, root yet to be confirmed. If you need it PM me.
I strongly advise anyone trying to flash TWRP to check their storage chip first using adb command "ls /proc/fs/*".
If you get mmcblk your F******, SD or UFS you are good.
I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.
Thanks!
Goronok said:
I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.
Click to expand...
Click to collapse
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!
MosquitoByte said:
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!
Click to expand...
Click to collapse
https://www.gizdev.com/root-huawei-p10-p10-plus-install-twrp/
If you follow this guide exactly, you'll be rooted without issues. (you can use their files, they work fine) Two things to watch for :
1. You absolutely cannot slide the first slider in TWRP to allow modifications. You have to click the read only button.
2. It will only work on a fresh install / fresh boot.img. If you've already allowed modifications within TWRP, you're stuck. You have to flash a new boot.img or completely re-install EMUI via update.zip or funkyhuawei.
Hope this helps
Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis
DV87XDA said:
Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis
Click to expand...
Click to collapse
1. No factory reset within the device will help you once you've swiped to allow modifications within TWRP.
2. I did funkyhuawei, so it's the only thing I can speak to. This method will absolutely work assuming you dont mind spending a few dollars and have a router where you can specify DNS.
3. update.zip should (in theory) work from sdcard, though I have not personally tried it. I think most of the people mentioning this method are coming from a P9/Mate9, which does things a little differently.
4. I have not seen a link for VKY-B130 yet, but here is one for B124. The boot.img here should work just the same... http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v82453/f2/full/update.zip
can't figure out what is wrong
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://imgur.com/a/nzog4
Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis
Been there..
DV87XDA said:
Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis
Click to expand...
Click to collapse
I already did everything you wrote, still no go.
Please update me if you get a different result.
Tried both TWRP versions.
What firmware you had at first?
I have bought my phone 10 days ago.
From T-Mobile Germany.
VKY-L09 6GB Version, Single Sim i guess.
Not sure what Firmware i had when i bought it, cause I immediately tried to root after buying, without checking the FW Version.
But I did a FunkyHuawei Restore before with VKY-L09C432B130 Firmware and it worked.
Only the Full Root is the Problem right now.. damnit.
I Will try everything and let you know.
Later!
MosquitoByte said:
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
http://imgur.com/a/nzog4
Click to expand...
Click to collapse
What root zip are you trying to flash?
That from gizdev. Superroot.noverity.nocrypt.zip
Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..
Ohhh Great
DV87XDA said:
Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..
Click to expand...
Click to collapse
I am now reverting to VKY-AL00C00B123 using FunkyHuawei...Please share what to do next
Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis
DV87XDA said:
Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis
Click to expand...
Click to collapse
I think I tried that already,
I will try again..
Where did you get your firmware from and what firmware you were on?
I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!
DV87XDA said:
I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!
Click to expand...
Click to collapse
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.
MosquitoByte said:
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.
Click to expand...
Click to collapse
Is your device an AL00?
Goronok said:
Is your device an AL00?
Click to expand...
Click to collapse
Yes indeed.

[TOOL][OP5T] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 5T's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​
Development starts, nice !
75markus said:
Development starts, nice !
Click to expand...
Click to collapse
Yes i have it ready from 2 days ago
is twrp available for the oneplus 5t
Hi, this tool compatible with OP5 or only for 5T? Thanks.
hypergamer1231 said:
is twrp available for the oneplus 5t
Click to expand...
Click to collapse
Yes there is available a beta twrp for op5t, i will update it when another better will come
neoalex13 said:
Hi, this tool compatible with OP5 or only for 5T? Thanks.
Click to expand...
Click to collapse
Both devices are supported
Where is Stock Recovery for OP5T?
I wanted to know to flash original firmware/update is it required to have original recovery or can it be done with twrp.
I can remember on the oneplus one twrp was sufficient for original firmware.
Normas Interruptor said:
Where is Stock Recovery for OP5T?
Click to expand...
Click to collapse
The stock recovery is not available at the moment, oneplus doesn't release it and noone have extracted it
adamo86 said:
I wanted to know to flash original firmware/update is it required to have original recovery or can it be done with twrp.
I can remember on the oneplus one twrp was sufficient for original firmware.
Click to expand...
Click to collapse
If you want you can manually flash stock oneplus rom with twrp or stock recovery, this tool flash stock rom through fastboot but the OnePlus 5T fastboot stock rom is not available for now
Can I just unlock bootloader and root and still update latest updates.
Also is anything broken when unlocking bootloader like certain features etc
adamo86 said:
Can I just unlock bootloader and root and still update latest updates.
Also is anything broken when unlocking bootloader like certain features etc
Click to expand...
Click to collapse
If you unlock the bootloader you will continue to get updates, but if you root the phone you will not get official update, you will flash full rom with twrp all times
Does the all-in-one tool kit work on a Mac?
redvw said:
Does the all-in-one tool kit work on a Mac?
Click to expand...
Click to collapse
No, it works only in windows
mauronofrio said:
If you unlock the bootloader you will continue to get updates, but if you root the phone you will not get official update, you will flash full rom with twrp all times
Click to expand...
Click to collapse
After unlocking bootloader the device would be erased. I wanted to know if the same applies if I flash twrp recovery. Thank you.
I'm planning to unlock bootloader load all my apps etc and then when stock recovery is available flash twrp.
adamo86 said:
After unlocking bootloader the device would be erased. I wanted to know if the same applies if I flash twrp recovery. Thank you.
I'm planning to unlock bootloader load all my apps etc and then when stock recovery is available flash twrp.
Click to expand...
Click to collapse
If you flash the twrp you should not re erase memory. If you want i can extract the stock recovery from your phone
mauronofrio said:
If you flash the twrp you should not re erase memory. If you want i can extract the stock recovery from your phone
Click to expand...
Click to collapse
I haven't received the device yet. How is it extracted?
adamo86 said:
I haven't received the device yet. How is it extracted?
Click to expand...
Click to collapse
Need an unlocked bootloader, then only boot (not flash) the twrp and extract the stock recovery image in the phone then upload it and it's all
mauronofrio said:
Need an unlocked bootloader, then only boot (not flash) the twrp and extract the stock recovery image in the phone then upload it and it's all
Click to expand...
Click to collapse
So I use twrp as boot to back up stock recovery is that correct.
adamo86 said:
So I use twrp as boot to back up stock recovery is that correct.
Click to expand...
Click to collapse
Is not a simple backup but a real copy, and yes something like that
mauronofrio said:
Is not a simple backup but a real copy, and yes something like that
Click to expand...
Click to collapse
Is there a step by step process which I can use.
Also I'm sure I saw stock firmware on another thread for 5t.
Can't the recovery be extracted from stock firmware.

Categories

Resources