I am currently new to all this stuff so i dont have an exact idea what i was doing
First of all i rooted my Device I9500 Which had 5.0.1 Android
then i installed TWRP Recovery and then i was not able to backup any stuff to External SD Card so i installed some Boot.img which i exactly dont remember which i installed from watching any youtube video then later some problem occured It showed some error like "firmware upgrade encountered an issue" then i flashed Philz touch recovery which then worked and i was able to backup my data but i was not able to Boot into my Original ROM or couldnt see an option for that. Then i downloaded The Ozcan V6.3 ROM and tried installing it it succesfully installed but after that its not able to boot uo and stuck at SAMSUNG Logo Screen.
Please Help me What to DO !!!.
Thanks In Advance
If your device can still get into download mode, download the stock Android 5.x image for your device and flash it using Odin. That will get you back to square one so you can start over with rooting and installing the custom ROM.
I had the same problem on my gs4. It would only go to galaxy logo so I flashed the lollipop firmware via odin and all is well.
Sent from my GT-I9505 using XDA Free mobile app
Just have to flash the default one with Odin ?
i also backed up my old data with philz to my sd card that also and i also downloaded a new Default 5.0.1 ROM ?
Which one should i flash ?
and whats the critera for finding ROMs leaving the model number ? (noob question)
Is the S4 unlocked? If not, what country are you in and what carrier do you have?
My Country is India and its the International Version I9500 and i am not pretty sure that it was unlocked or not .but it was rooted and recovery was installed
Added later :
I just installed recovery back and then tried to install ROM the ROM was also stuck on the Boot Loop I think my boot loader isnt unlocked and ima stuck there because of that
I9500 isnt bootloader locked. And u must be flashing the boot.img on other partition that not in the odin package. So u must search how to repartition ur device. But. U MUST VERY CAREFULL WITH REPARTITION OPTION! U MIGHT BRICK UR DEVICE IF U DONT UNDERSTAND WHAT U DOING!. And if u wanna flash recovery and boot.img or bootloader thing. U must ONLY flash for I9500 version!. And if u successfully repartition ur device. U will lose all internal storage too. Ok good luck
Utkarsh_Chaudhary said:
My Country is India and its the International Version I9500 and i am not pretty sure that it was unlocked or not .but it was rooted and recovery was installed.
Click to expand...
Click to collapse
You would know if you were carrier unlocked as you'd be able to put a SIM from a different carrier into the S4 and have the device work. To get you the correct ROM we still need to know your carrier.
secure download : enabled
Hi my galaxy s4 gt i9500 is stuck in a bootloop. When is boot I get "firmware upgrade encountered an issue. Please select recovery mode in kies and try again"... when I boot into download mode I see "secure download : enabled" which wasn't usually there. Am trying to flash the pit file with twrp but Odin is failing.... is it because of the secure download enabled?? Please help me
You can't flash the PIT file with TWRP.
Do you have Odin? Do you have a copy of your stock ROM, downloaded either from Sammobile or samsung updates? If not, you'll need to get them. You then flash the firmware through Odin WITHOUT the PIT file. This should restore your device to operating condition. Afterward, you will of course need to root the S4 and flash a copy of TWRP to be able to install a custom ROM.
Carrier is Airtel
Related
i installed safe strap and got gold finger rom working now im locked out when i try to boot in recovery it says firmware upgrade encountered an issue. please select recovery mode in kies and try again i have download mode no recovery what can i do to fix stock recovery for samsung galaxy s4 can it be fixed i tried flashing with odin the stock recovery that fixed it last time it fails when it get to the last boot check
There is no real use for the stock recovery. What are you really trying to achieve?
jmjoyas said:
There is no real use for the stock recovery. What are you really trying to achieve?
Click to expand...
Click to collapse
i installed safe strap and sucessfully installed gold finger but installed *root* recovery tools app in playstore and flashed over twrp well that locked my original recovery and has messed everything up where i cant load anything but download mode rom is not working just download mode =,(
update i reflash the sgh-i337 .pit file and gain access to stock recovery but when i try to flash another stock rom fails and i have to reflash the .pit file when it loads up it shows a att logo that goes to a weird image and freezes is it hard bricked
update
fixed the phone slot was clicked and not pda thanks for the help i figured it out and im glad i did omg i was almost in tears =)) awsome work xda
You needed the pit file because of the re-partition option ticked in Odin.
A friend tried to flash CWM ( http://forum.xda-developers.com/showthread.php?t=2201860 ) for s4 and it failed...and now the phone is stuck..it says: Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again
Phone model: i9505
Some help please? I don't know what to do
EDIT: i found that i can flash the firmware with odin..but i still have a question..im not really sure what firmware i had before..so is there any problem if i install firmware from other country or carrier?
You can find latest stock fw for your phone here.
wvw.sammobile.com/firmwares/checker/
I can't post external links so change wvw to www
waynevan2000 said:
You can find latest stock fw for your phone here.
wvw.sammobile.com/firmwares/checker/
I can't post external links so change wvw to www
Click to expand...
Click to collapse
thanks but.. the phone isnt starting that's why i have to flash a firmware..so i can't check what firmware i have..
The flashing process failed at half of it..:/......
Just pick one of the latest.
btw if the flashing of the recovery fails then just try the standard stuff
- different usb port
- different cable
Lennyz1988 said:
Just pick one of the latest.
btw if the flashing of the recovery fails then just try the standard stuff
- different usb port
- different cable
Click to expand...
Click to collapse
Finally worked to flash a firmware..i used europe firmware from here http://forum.xda-developers.com/showpost.php?p=41072392&postcount=2
Aaaaand when the phone started, a error keeped showing up: samsung keyboard stoped working...and i entered in recovery menu and did a factory reset, and that error is still showing.... some help?..maybe i should flash other firmware? which firmware? i really don't know what firmware it had before..
And one more thing..i cant even connect to wifi because it says something about security error something that the system blocked an unwanted action or something like that :/..something from knox :/
PS: i flashed just the AP file but the firmware had more files :/..
raulx222 said:
Finally worked to flash a firmware..i used europe firmware from here http://forum.xda-developers.com/showpost.php?p=41072392&postcount=2
Aaaaand when the phone started, a error keeped showing up: samsung keyboard stoped working...and i entered in recovery menu and did a factory reset, and that error is still showing.... some help?..maybe i should flash other firmware? which firmware? i really don't know what firmware it had before..
And one more thing..i cant even connect to wifi because it says something about security error something that the system blocked an unwanted action or something like that :/..something from knox :/
PS: i flashed just the AP file but the firmware had more files :/..
Click to expand...
Click to collapse
Why did you want to flash a custom recovery, to just flash a custom rom? If so, then just flash the custom recovery again and then flash the custom rom you want.
And why would you just flash the ap file if the firmware has more files? Makes no sense to me.
Lennyz1988 said:
Why did you want to flash a custom recovery, to just flash a custom rom? If so, then just flash the custom recovery again and then flash the custom rom you want.
And why would you just flash the ap file if the firmware has more files? Makes no sense to me.
Click to expand...
Click to collapse
Thanks! i managed it.. 2 S4 devices got Imperium v13 ROM
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
dork997 said:
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
Click to expand...
Click to collapse
Akalsemann said:
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Try that
Akalsemann said:
Try that
Click to expand...
Click to collapse
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
vinura kithmal said:
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
Click to expand...
Click to collapse
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
dork997 said:
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Click to expand...
Click to collapse
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
dork997 said:
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
Click to expand...
Click to collapse
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Swimguy14 said:
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
vinura kithmal said:
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Click to expand...
Click to collapse
I followed instructions given earlier to install philz recovery, i opened it by booting into it immediately i selected format for new rom install. after that i am stuck on samsung logo i think the old rom is now deleted. Now i am downloading fresh 5.0.2 UK from sammobile i will download it and try to root it normally with flashing CF ROOT via odin. if it does not work then i will do what u guys said. I dont know if TWRP will work by the same method (booting immediately into recovery) but philz recovery did. And i will also try flashing a prerooted Rom. What i dont understand is that why is this happening in the first place? i had an alpha before i could enter into TWRP normally i rooted it with CF AUTO root normally...no errors or anything why is this happening on my S5? the last owner must have done something weird with it ...i am trying to figure out why is this happening in the first place. Appreciate ur feedback.
I also dont know why this is happening
and yeah
i had all the galaxy S series upto S5 and this the only device that is not rooting with CF-auto root
the latest updates from samsung may have done something i dnt knw
and eralier mentioned method worked 100% for me and i did root my device like that
And last owner may b or may not done anything with it because my device is a brand new and still i had that issue
I am on a UK (vodafone) phone 4.4.2 KK and after rooting with odin and tripping knox (obviously) i installed CWM And TWRP and entered recovery but only after a long time i discovered that the recovery mode i was entering was stock .
In the recovery mode i couldnt find the option to install from zip only the option to install from external storage.
I have downloaded the CM 11 4.4.4 and put it on the external sd card.
In the recovery mode i navigated to the location of the CM 11 zip and attempted to flash it .
It goes through the process and at the end it says something like installation successful but the the phone boots into the normal stock firmware.
After reading a ton of material and articles i have discovered that my bootloader may be locked and this is the reason i cannot install CWM and flash custom roms.
In the end i have 3 questions.
Is there curently a solution to install CWM and flash custom roms on phones with locked bootloders ?
Will i be able to update to lollipop via Kies when is released ?
Will i be able to return my phone to its original state so that the lollipop update when it is released wont detect that the phone has been modified ?
Basically i am stuck. I have a rooted phone with void warranty and unable to install roms because the bootloder is locked ??????
I would really apreciate some help because i have run out of options and the frustration has reached stratospheric levels.
Thanks in advance for your help.
You rooted with ODIN and installed both CWM and TWRP .Thats all wrong odin is not root and you don't flash two recovery s .
You say your bootloader is locked = what model phone do you have .
Its reading as fail read the very basics .
Start at the beginning at for that you need to know what model number you have . You then find the correct root for your model and flash a recovery either CWM or TWRP not both .
JJEgan said:
You rooted with ODIN and installed both CWM and TWRP .Thats all wrong odin is not root and you don't flash two recovery s .
You say your bootloader is locked = what model phone do you have .
Its reading as fail read the very basics .
Start at the beginning at for that you need to know what model number you have . You then find the correct root for your model and flash a recovery either CWM or TWRP not both .
Click to expand...
Click to collapse
I did not flash both.
I only installed both and tried to flash either.When i saw that i couldn flash one i tried the other one.
My phone model number is SM-9005 ..
The root file i used was CF-Auto-Root for SM-N9005 .
uxaar said:
I did not flash both.
I only installed both and tried to flash either.When i saw that i couldn flash one i tried the other one.
My phone model number is SM-9005 ..
The root file i used was CF-Auto-Root for SM-N9005 .
Click to expand...
Click to collapse
Flash this in Odin.
https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
Sent from my SM-N9005 using Tapatalk
Untick auto reboot in Odin when you flash recovery then boot to recovery using three button combo stock ROM rewrites stock recovery when it boots iirc
celderic said:
Flash this in Odin.
https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you very much.
That worked flawlessly and afterwards i managed to install CM12 5.1.
you saved me .Thanks again
So i was going to install a custom ROM on my g530h via twrp, and im new to this
I downloaded the file that the app asked me to, and acidentally flashes It as a boot, not as a recovery, now the phone just stays in the download mode, and I cant install the stock ROM with Odin, It gives me a different setor every time
Please help
What file did you actually install like what model was it exactly for ?
Post some screenshots of odin.
try watchin this.. i also have the same problem this week but i find the ways to fix it just flash the stock firmware of g530h xcu using odin so i use the xcu phil firmware which is 4.4.2 and it works.. just flash the stock firmware.. hope it helps...
Do you have any other method because when I rooted the divice I deleted some system files then lost USB connection with pc I tried may way to make it back like downloading the driver from Samsung nothing work and tried different stock rooms and custom ones all of them had the error 7 or md5 file not found by the the same thing happened with the os I made the boot to recovery by accident and lost the system .
Hi buddy
I am in a huge problem a friend gave me his sm-g530h duos to upgrade it's firmware to 5.0.2 i downloade one from sammobile & flashed it but it stuck on logo & not booting to recovery only download mode.then i tried to flash many other lollipop roms but every odin said fail.please help