Database Users

[Q] G900S outside Korea

Hi,
i bought an unlocked galaxy S5 SM-G900S (SK telecom), 32 Gb..
It's a wonderful phone but it seems that it is half locked:
cannot update OTA if no korean sim card is in the phone.
my phone always thinks that it's roaming.. i always have 2 clocks (home and local).
in the call settings, there is no call forward or divert.
no way to make a 3 way call (conference call) as the "merge" button isn't there. I can only swap calls.
i can live with everything mentioned above except the conference call lacking; it is very very important to my work.
i tried to flash the international firmware G900F but it kept failing; when i flashed the G900S firmware it went very smoothly.
my question:
anyone else with this problem? any developer has any idea about what should be done.
what bothers me i may need to sell the only 32gb version available (as far as i know) just for one setting.
Appreciate any reply or help;
Regards,

Ditto
I don't have a solution. I share the same concern as mentioned by you. Wondering if you found a solution!!?

Firmware Upgrade Available
Same error - but now there is a firmware upgrade. Lets see what happens.

Still not working
BuntyRulz said:
Same error - but now there is a firmware upgrade. Lets see what happens.
Click to expand...
Click to collapse
Just checked it out with the new firmware... appreciable performance improvement, however no conference ability as of yet. I tried to flash some custom roms, however the recovery image is just not getting uploaded.
So still stuck with everything as it was before..

Obtained Clockwork Mod - Merge obtained
BuntyRulz said:
Just checked it out with the new firmware... appreciable performance improvement, however no conference ability as of yet. I tried to flash some custom roms, however the recovery image is just not getting uploaded.
So still stuck with everything as it was before..
Click to expand...
Click to collapse
Update - Just got the clockwork update for this model :
Download from here, choose the right blue button to download.
http://pan.baidu.com/wap/album/file?uk=704970239&album_id=6031394112765541086&fsid=1098522244643130
After you download the clockwork mod - do the following :
(1) Download the XtreStoLite v.1.1.3 ROM
- http://forum.xda-developers.com/showthread.php?t=2732110
(2) Ensure that you have the ROM on an external sd card and that you have put that inside your device
(3) Install the clockwork recovery via Odin 3.7 version
(4) Power down after above step
(5) Press the Volume UP + HOME + Power button to start in the recovery mode
(6) Wipe the data clean
(7) Install the ROM from the SD card - this will be interactive and self explanatory ( choose the 900L model )
(8) Restart and everything will be in the format you want... AND OF COURSE MERGE IS BACK
Thanks & Regards,
BuntyRulz
(Would have posted this in the developers page, but not enough points :crying: )

BuntyRulz said:
Update - Just got the clockwork update for this model :
Download from here, choose the right blue button to download.
http://pan.baidu.com/wap/album/file?uk=704970239&album_id=6031394112765541086&fsid=1098522244643130
After you download the clockwork mod - do the following :
(1) Download the XtreStoLite v.1.1.3 ROM
- http://forum.xda-developers.com/showthread.php?t=2732110
(2) Ensure that you have the ROM on an external sd card and that you have put that inside your device
(3) Install the clockwork recovery via Odin 3.7 version
(4) Power down after above step
(5) Press the Volume UP + HOME + Power button to start in the recovery mode
(6) Wipe the data clean
(7) Install the ROM from the SD card - this will be interactive and self explanatory ( choose the 900L model )
(8) Restart and everything will be in the format you want... AND OF COURSE MERGE IS BACK
Thanks & Regards,
BuntyRulz
(Would have posted this in the developers page, but not enough points :crying: )
Click to expand...
Click to collapse
I plan to buy this in India. Would the phone still show in roaming? After flashing the custom firmware ?

Yes...
hellboy13 said:
I plan to buy this in India. Would the phone still show in roaming? After flashing the custom firmware ?
Click to expand...
Click to collapse
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.

Hai Bunty, Just one question.
After installing L rom, have you tried installing any other L roms or KLTE roms like Slim Rom or AOKP or Carbon rom
I'm getting my S model phone next week and never wanted to end up having only few roms.
Sorry one more,
Has the conference and call forward or divert issue sorted after installing custom rom

BuntyRulz said:
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.
Click to expand...
Click to collapse
Well thanks for the info. Get it for 37k. Now am sure to get this.

BuntyRulz said:
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.
Click to expand...
Click to collapse
check pm

I have the same phone , and I ask this because I don't know so much about this **** : If I change the ROM , i can reach the download mode and service mode in english ? because right now is in koreean , and btw i can go in download mode . If you have time, aamir2day , please send me a PM with the step that I must do to resolve this problem . Thank you in advance !

Hi,
You should be able to access everything even before changing the ROM. I only changed the ROM as I wanted the conference call facility. If you are fine without that I would suggest to just change the language in the first screen of the boot up and then use the standard ROM that Samsung provides. You will be getting kies updates everytime samsung makes the new ROM available.
marianbot said:
I have the same phone , and I ask this because I don't know so much about this **** : If I change the ROM , i can reach the download mode and service mode in english ? because right now is in koreean , and btw i can go in download mode . If you have time, aamir2day , please send me a PM with the step that I must do to resolve this problem . Thank you in advance !
Click to expand...
Click to collapse

do you know how i change the language ? because when i push the power+vol down+ home i can go in the download mode , i have some koreean think , and I don't know how to change . Thank you for the help .

Cant get to download mode it goes in some mode and all options are in korean its not recovery mode either

Tutorial: How to get data working on sprint g900p S5 GSM

WARNING: DO THIS AT YOUR OWN RISK , I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LOOPING DEVICES , IF YOU ARE GOING TO TRY THIS BE SURE TO KNOW WHAT YOU'RE DOING BEFORE ATTEMPTING
First of all this is my very first post on the community, i dont usually post here but since i have been on here since the times of the motorola droid 2 i might as well post this thing that i did to help me sort the problem with the data on the galaxy s5
Things that i used:
TWRP Recovery installed via TWRP Manager from playstore
Galaxy s5 4.4.2 already rooted via kingoroot ( You can use any other method that you prefer)
Shohat ROM V5 http://forum.xda-developers.com/showthread.php?t=2719386 (All credits go directly to Shohat for this amazing rom)
Build prop editor (You can get it from playstore)
cm-11-20140919-UNOFFICIAL-klte (This is available for download at androidhost here http://d-h.st/niU , all credits go to Albinoman887 for uploading that file and to cyanogen for making that build)
SSU.APK http://forum.xda-developers.com/spr...print-samsung-unlocker-unlock-sprint-t2928250 (All credits go to aalyatim for making this wonderful app)
Patience
Lets begin
First off all you got to root the phone , i used kingoroot as its one of the fastest and easiest method to root your device , it even gives you on screen steps for doing the rooting process
Next once the device has been successfully rooted we are going to go on ahead and download TWRP Manager from playstore, install it and install the recovery on your phone ( If you already have it or if you have a diferent method to install it theres not a problem)
Next once the recovery has been installed we are going to unlock the phone by using SSU.apk and just installing the app and running it (If you have already unlocked the phone there is no need to install the unlock again)
Next once the phone has been successfully unlocked we are going to be doing the next step, download build prop editor from playstore , give root priviliges to it , go to the edit option ( Small pencil located at the bottom right of the screen ) and scroll down all the way to the bottom, once here type in the following:
ril.sales_code=LOL
ro.csc.sales_code=LOL
Once you have that in , we are going to save it by going to the top right and clicking the floppy disk and waiting for it to save build prop
Next step will be turning off device and entering recovery mode ( You can google how to access recovery mode ) , once inside recovery we are going to be doing the following , since im using TWRP i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next step was installing the cm-11-20140919-UNOFFICIAL-klte that you previously downloaded on the steps below , install gapps if you want but it wont be necessary , once thats install and the phone boots you will be able to see the H+, 3g or the connection that you have on your area based on your gsm provider
Now in case you want to stop here and stay with cyanogen you can do it , but if you want to have the stock fresh look of S5 TouchWiz then we are going to do next steps
Once thats done we are going to be accessing recovery once more , once inside we are going to be doing the exact same process that we did before i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next we will be installing the rom Shohat ROM V5 once it begins, it takes a while for it to finish , do not restart your device until its done even if it appears its not doing anything , once install reboot the device , you will wait a moment for it to load, once loaded you will be getting the samsung galaxy welcome screen , complete all of the steps to finish the setup and youre done , if you dont see the H+ sign or the signal , just check that your apn are there and were done
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
I have attached pictures with proof , i took it with my camera so it doesn look edited or anything , i hope this helps you out as it helped me

work for s5 sprint g900p??
This may enable the sprint samsung galaxy s5 version G900P get signal H +????

lololo619 said:
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
Click to expand...
Click to collapse
Are you saying the phone picked up signal with an AT&T SIM here in the US...?

As far as I know, this doesn't work on the G900P for domestic use. It probably worked for the OP because he's in Mexico (or I've just molested my G900P so much it's not picking up any GSM networks).

ecs87 said:
As far as I know, this doesn't work on the G900P for domestic use. It probably worked for the OP because he's in Mexico (or I've just molested my G900P so much it's not picking up any GSM networks).
Click to expand...
Click to collapse
Bahaha - better get on that
I figured it was a super long shot, just asking him to clarify. I'm subscribed to every thread on Sprint Samsung unlocking, and from your posts (and others'), it's clearly deeper than ROM level. A guy can dream though ^__^

Doesn't work for t-mobile

DimVim said:
Doesn't work for t-mobile
Click to expand...
Click to collapse
Duh
@lololo619 might wanna put a disclaimer about US GSM use in the OP

I hope the OP sees this.
Did you have problems with the "Unable to establish a wireless data connection LTE: ESM-29 EMM-X" with correct APN before and this fixed it? Thanks for posting

Your Solution Worked!!!
Thank you so much.
I can confirm that this WORKS!!!
I was heart broken after I unlocked the phone and could not get data on Digicel Dominica (in the Caribbean) even with the correct APN settings. I googled for some time until I found your post. After reading the comments on this post, I did not have much hope but as they say "nothing beats a try" and so I followed your instructions and VOILA...
Thanks again Bro...:good:

iBowToAndroid said:
Bahaha - better get on that
I figured it was a super long shot, just asking him to clarify. I'm subscribed to every thread on Sprint Samsung unlocking, and from your posts (and others'), it's clearly deeper than ROM level. A guy can dream though ^__^
Click to expand...
Click to collapse
I got on it. Restored the efs data partitions And performed the note 3 domestic unlock steps and dest's (sorry buddy, I only remember your original username!) international unlock app. I then modified the build.prop as much as I could to the Verizon build (G900V). I can see T Mobile and AT&T networks when searching with a valid T Mobile SIM in, but cant connect obviously. The invalid SIM notification would have to be legitimately removed before one could even consider registering onto the network. I...just want to take a peek at nv item 10124
Sent from my LGLS990 using XDA Free mobile app

ecs87 said:
I got on it. Restored the efs data partitions And performed the note 3 domestic unlock steps and dest's (sorry buddy, I only remember your original username!) international unlock app. I then modified the build.prop as much as I could to the Verizon build (G900V). I can see T Mobile and AT&T networks when searching with a valid T Mobile SIM in, but cant connect obviously. The invalid SIM notification would have to be legitimately removed before one could even consider registering onto the network. I...just want to take a peek at nv item 10124
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I remember seeing 10124 mentioned. It'll be interesting to see what form DSU takes. It's obviously still an OTA process instead of a code but I'm curious as to how different it is from the current international method

iBowToAndroid said:
Yeah I remember seeing 10124 mentioned. It'll be interesting to see what form DSU takes. It's obviously still an OTA process instead of a code but I'm curious as to how different it is from the current international method
Click to expand...
Click to collapse
Its just another IPC command called over RIL I bet. If you followed the ORIGINAL author of the international unlock's post he drops the hint on what IPC command was called. I was able to decompile his app, change the IPC command and relock the phone, confirming that the phone is indeed locked using this method instead of directly accessing the nv items over the QC diag port. We are able to log the international unlock process if you know how to set the debugging levels high enough. With a domestic unlock on the horizon via OTA, it shouldn't be long before the domestic unlock back is public.
Sent from my LGLS990 using XDA Free mobile app

Hi, hope you're doing fine.
lololo619 said:
WARNING: DO THIS AT YOUR OWN RISK , I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LOOPING DEVICES , IF YOU ARE GOING TO TRY THIS BE SURE TO KNOW WHAT YOU'RE DOING BEFORE ATTEMPTING
First of all this is my very first post on the community, i dont usually post here but since i have been on here since the times of the motorola droid 2 i might as well post this thing that i did to help me sort the problem with the data on the galaxy s5
Things that i used:
TWRP Recovery installed via TWRP Manager from playstore
Galaxy s5 4.4.2 already rooted via kingoroot ( You can use any other method that you prefer)
Shohat ROM V5 http://forum.xda-developers.com/showthread.php?t=2719386 (All credits go directly to Shohat for this amazing rom)
Build prop editor (You can get it from playstore)
cm-11-20140919-UNOFFICIAL-klte (This is available for download at androidhost here http://d-h.st/niU , all credits go to Albinoman887 for uploading that file and to cyanogen for making that build)
SSU.APK http://forum.xda-developers.com/spr...print-samsung-unlocker-unlock-sprint-t2928250 (All credits go to aalyatim for making this wonderful app)
Patience
Lets begin
First off all you got to root the phone , i used kingoroot as its one of the fastest and easiest method to root your device , it even gives you on screen steps for doing the rooting process
Next once the device has been successfully rooted we are going to go on ahead and download TWRP Manager from playstore, install it and install the recovery on your phone ( If you already have it or if you have a diferent method to install it theres not a problem)
Next once the recovery has been installed we are going to unlock the phone by using SSU.apk and just installing the app and running it (If you have already unlocked the phone there is no need to install the unlock again)
Next once the phone has been successfully unlocked we are going to be doing the next step, download build prop editor from playstore , give root priviliges to it , go to the edit option ( Small pencil located at the bottom right of the screen ) and scroll down all the way to the bottom, once here type in the following:
ril.sales_code=LOL
ro.csc.sales_code=LOL
Once you have that in , we are going to save it by going to the top right and clicking the floppy disk and waiting for it to save build prop
Next step will be turning off device and entering recovery mode ( You can google how to access recovery mode ) , once inside recovery we are going to be doing the following , since im using TWRP i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next step was installing the cm-11-20140919-UNOFFICIAL-klte that you previously downloaded on the steps below , install gapps if you want but it wont be necessary , once thats install and the phone boots you will be able to see the H+, 3g or the connection that you have on your area based on your gsm provider
Now in case you want to stop here and stay with cyanogen you can do it , but if you want to have the stock fresh look of S5 TouchWiz then we are going to do next steps
Once thats done we are going to be accessing recovery once more , once inside we are going to be doing the exact same process that we did before i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next we will be installing the rom Shohat ROM V5 once it begins, it takes a while for it to finish , do not restart your device until its done even if it appears its not doing anything , once install reboot the device , you will wait a moment for it to load, once loaded you will be getting the samsung galaxy welcome screen , complete all of the steps to finish the setup and youre done , if you dont see the H+ sign or the signal , just check that your apn are there and were done
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
I have attached pictures with proof , i took it with my camera so it doesn look edited or anything , i hope this helps you out as it helped me
Click to expand...
Click to collapse
Is there a way I can go back to a Stock Rom and keep my data working?
Btw, thanks for this excellent post. Works very finee!!!:good::good::good:

cm-11-20140919-UNOFFICIAL-klte.zip (226.23 MB) link not working .. another link please
---------- Post added at 08:35 PM ---------- Previous post was at 08:28 PM ----------
Download now button not working
Download button downloads a virus

Data working now on CM11
ShohatRom_S5_G900F_V5 not working on NK4 bootloader ( 4.4.4 ) .. what touchwiz ROM should i use ?

aamszia said:
Data working now on CM11
ShohatRom_S5_G900F_V5 not working on NK4 bootloader ( 4.4.4 ) .. what touchwiz ROM should i use ?
Click to expand...
Click to collapse
I dropped to NE (4.4.2) to get it to work. It has everything I want expect wifi calling. I have the same question if there a 4.4.4 touchwiz rom (or 4.4.2 with wifi calling) that works with this.
Thanks OP!

is fingerprint working in shohat rom? mine is not working, NFC either...
Thanks!

shohat rom working on 4.4.4 ( NK4 ) ? i only got black screen ...

I can confirm that this really works.
Thanks bro for this wonderful job.
Sent from my SM-G900F using XDA Free mobile app

This really works, thanks. I can confirm that the method work in 4.4.4 using cm11 but shohatrom don't work so if you want touchwiz you should use xtrestolite rom (that one works)

Wifi stopped working on SM-T555

Hello, i am new to this forum so please don't be rude if this is the wrong section to post this
Today i managed to perma-kill my wifi by starting Pry-Fi and uninstalling it at the same time (shame on me)
Now my wifi seems completely dead it doesn't even try to start.
Things i tried already:
Rebooted with Airplane mode
Used the advanced repair method of the Wifi Connection Manager app
Tried to reset my network/carrier settings with a weird USSD code that didn't work.
Checked /persistent/ and found out that there is no wifi/ folder so i created it inclusive .macaddr file after this post http://forum.xda-developers.com/google-nexus-5/help/wifi-stuck-t2721643/post60011636
Also i used adbGUI to gather this info: http://pastebin.com/raw/X4kmCn5s
Specs: Samsung Galaxy Tab 9.3? (SM-T555)
Android 5.1.1 Stock (ROOT)
TWRP 2.8.7.1
Please help me to recover my network without resetting the whole tablet ♥

Bluscream said:
Hello, i am new to this forum so please don't be rude if this is the wrong section to post this
Today i managed to perma-kill my wifi by starting Pry-Fi and uninstalling it at the same time (shame on me)
Now my wifi seems completely dead it doesn't even try to start.
Things i tried already:
Rebooted with Airplane mode
Used the advanced repair method of the Wifi Connection Manager app
Tried to reset my network/carrier settings with a weird USSD code that didn't work.
Checked /persistent/ and found out that there is no wifi/ folder so i created it inclusive .macaddr file after this post http://forum.xda-developers.com/google-nexus-5/help/wifi-stuck-t2721643/post60011636
Also i used adbGUI to gather this info: http://pastebin.com/raw/X4kmCn5s
Specs: Samsung Galaxy Tab 9.3? (SM-T555)
Android 5.1.1 Stock (ROOT)
TWRP 2.8.7.1
Please help me to recover my network without resetting the whole tablet
Click to expand...
Click to collapse
Ok, there is no way to restore your network settings because it might be older or newer than the framework itself so your device is going to crash anyways. So you are going to reset it the Official and Samsung way (might not work with custom roms if you have it installed it on your device). Reply to me if you have installed a custom rom.
As I have told other people who are new to XDA,
(BACKUP YOUR SAMSUNG AND GOOGLE ACCOUNTS AND DATA! I AM NOT RESPONSIBLE FOR ANY DAMAGES AND LOSSES!)
Download Samsung SmartSwitch
Open up the installer and finish it
Then press the More button on the application
Press Device Initialization
Press Device Initialization again in the new tab
Type in your model number and your serial number (Don't press search yet!)
Plug in your device
Turn off your device and go to Download Mode (Volume Down + Power Button + Home Button)
It will say if you want to install a Custom Rom, blah blah blah
Press Volume Up button and it should take you to Download Mode
Go back to the PC and press search
Samsung SmartSwitch should download files and it will come out with the Admin Delegator Privileges
Grant the permission to it
Your new and updated firmware should be downloading
It usually takes 10 minutes to 3 hours depending on how good your Wi-Fi and your computer is.
If I helped smash that Thanks button!

I've already done this steps tonight and also upgraded to Android 6 this way. Now i only have to know how to get the apps and obbs recovered from the TWRP backup i made before ^^

Bluscream said:
I've already done this steps tonight and also upgraded to Android 6 this way. Now i only have to know how to get the apps and obbs recovered from the TWRP backup i made before ^^
Click to expand...
Click to collapse
If you had a twrp backup, why not just restore it in the first place?

ashyx said:
If you had a twrp backup, why not just restore it in the first place?
Click to expand...
Click to collapse
Cause
The backup was created based off Android 5.1
The backup was made AFTER the network settings got damaged

Help need please

Hi.. I have recently rooted my Samsung galaxy note 4 SM-N910F and I am wanting to downgrade from marshmallow 6.0.1 to Lollipop 5.1.1. I really need a dummy guide as I don't know how to do it and help will bbe appreciated

Hey there. Downgrading to an older version of Android means you'll have to factory wipe, but other than that it's pretty straightforward. Seeing as you have already rooted your phone, I assume you know how to use Odin, but here's all the steps anyway:
1. Download Odin
2. Find a Lollipop firmware for your device from SamMobile
3. Back up important data, and factory reset. You can do this in settings or in recovery.
4. Turn off your device, then hold power + vol down + home to put it in download mode
5. Open Odin, and put the firmware file you downloaded in the AP slot
6. Plug your phone in. If it isn't recognized, you probably don't have all the drivers installed - the easiest way to get those is to install Kies or SmartSwitch from Samsung.
7. Click Flash, and wait until it's done. Do not unplug the cable under any circumstance!
You're done!
EDIT: Oh, and by the way: Welcome to the forums! Remember to title your threads according to their content. Generic titles such as "help please" don't really invite people to click on them.

Can i downgrade my note 4 n910g from 6.o.1 to 5.1.1 im now on dr.ketans m12 rom
But now my mobile is stuck on download mode
Plz guide me thanks

bathijavinod said:
Can i downgrade my note 4 n910g from 6.o.1 to 5.1.1 im now on dr.ketans m12 rom
But now my mobile is stuck on download mode
Plz guide me thanks
Click to expand...
Click to collapse
describe here everything you did until now, step by step

First i wiped all data then i installes latest TWRP after that i installed dr.ketans rom M12 then again i wiped all data and rebooted the mobile its works for 3days perfectly
But now automatically shutdowns or restarting
And one time suddenly stuck on download mode
I removed battery and installed after few minutes
And it works fine
Rebooting issue is still there
I notice that somthing written on upper left side of corner kernels in yellow words
Should i have to change my kernel?
Right now my kernel is Hvitamin .
Plz suggest me what to do?
Thanks for reply

bathijavinod said:
First i wiped all data then i installes latest TWRP after that i installed dr.ketans rom M12 then again i wiped all data and rebooted the mobile its works for 3days perfectly
But now automatically shutdowns or restarting
And one time suddenly stuck on download mode
I removed battery and installed after few minutes
And it works fine
Rebooting issue is still there
I notice that somthing written on upper left side of corner kernels in yellow words
Should i have to change my kernel?
Right now my kernel is Hvitamin .
Plz suggest me what to do?
Thanks for reply
Click to expand...
Click to collapse
Did you ask/search in the rom thread?
Maybe someone else had the same problem.
It could be a kernel issue, try other kernel.
I don't use a G but a C version, so I can't test to see.
Also consider the eMMC issue of the 910 SnapDragon, search about this.

Thanks for reply dear
Can i update or change kernel ?right now im on H-vitamin any other kernel can you suggest me is better then H-vitamin?thank for your support

LeMaX3_EUI_6_by_Hero of Labor_final

Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
I am happy to present you the best EUI EUI 6.0.617Т experience for the Le Max 3 ( X850 ) .
About firmware :
-> The ROM install the EUI6_Firmware&Modem_x10. YOU DON'T NEED TO FLASH ANOTHER FIRMWARE
-Updated GoogleCamera (shoots in portrait mode).
-Guilt GooglFoto (for the filming of GoogleCamera in portrait mode in the settings of the developer of the camera to check the box "Use Google Photo").
-Changed the launcher for the native from LeEco.
-Changed the keyboard.
-work of GPS is improved
- It is optimized as much as possible on power consumption and operating speed.
- Removed useless apps
- Added Google camera (5.1.014_7) with working blur. The native EUI camera is removed, because with the Camera2api module it does not work. ( thanks to @ant074 )
- Optimized the work of Wi-Fi.
- build.prop changes
- Added the activation of AOT, the first setup will be longer, but after that the firmware becomes even faster.
- Installed Vulkan API for Android 7.1.1.( thanks to @ant074 )
- Patched sound system files
- Quiet sound in headphones fixed
- A bit of built-in applications.
- Added equalizers ViPER FX and Dolby Atmos.
( Latest fix : Now fingerprint scanner and video in the camera is working. ( thanks to @ant074 ))
If you encount an bug , please tell me the details in this thread .
6_7.1.2_final_clear
Video
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed .
**After unlocking the bootloader , you can get an green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take an backup , if you will want to restore back , or something goes wrong
1. Download the ROM
2. Download and copy the ROM , inside your internal memory
3.With all wipe-Dalvik / ART Cache-System-Cache-Data.
4. Flash the ROM
5. After that you can root
***Suggest to root with Magisk

Link to download firmware https://drive.google.com/file/d/1XlYLgCT5ZI0aw5_TBjQamEVnlSqWapHP/view

Great work aserge and @ant074 .
Update the post

diamantik said:
Great work aserge and @ant074 .
Update the post
Click to expand...
Click to collapse
Updated, thanks for the help..

aserge , maybe make another version of this ROM , there change the default keyboard to gboard , or back to AOSP , restore the default launcher , leave the stock camera ( in case we want to use the original camera , with the camera2api module disabled ) , stock video player , and remove all the added apps
i think that will be welcome :angel:

Thank you very much Aserge for continuing the development. Thank you very much

diamantik said:
aserge , maybe make another version of this ROM , there change the default keyboard to gboard , or back to AOSP , restore the default launcher , leave the stock camera ( in case we want to use the original camera , with the camera2api module disabled ) , stock video player , and remove all the added apps
i think that will be welcome :angel:
Click to expand...
Click to collapse
With the modem 6.0, the standard camera does not work. It does not make sense to return it.

ant074 said:
With the modem 6.0, the standard camera does not work. It does not make sense to return it.
Click to expand...
Click to collapse
I have taught that the stock camera was working now :crying:
Also are you interested to start working on an better 6.0.1 AOSP

diamantik said:
I have taught that the stock camera was working now :crying:
Also are you interested to start working on an better 6.0.1 AOSP
Click to expand...
Click to collapse
Not interested. This is a step backwards. Soon, a google camera with portrait mode will be introduced. The standard camera is an outsider.

Hello, Can you show me more cleary step by step to install this ROM ? Does this rom install itself the same as Russian? Can I use this manual from page 35
https://forum.xda-developers.com/le-max-2/how-to/leeco-le-max-3-x850-t3584515/page35
Ps.
At my another phone I install Rusian ROM in MAY 2018
Regards
TOM
EDIT:
Now I have a unlock boot loader , but I don't know how I can flash the .zip file or part of extract .
Can I flash it by one command ?

fantastic.. if possible add "multilangiuage".. option/language & imput/ add language

For me... how I CAN get restore a oryginal boot loader ?
Beacuse when I try power on, I will see blinkling green led lighgt. It is no good for me. Simple power ON by TWRP (RESTART system) is hopeless . This ROM in my opinion is very slow. EVERYDAY (from 04.2018) I use RUSIAN ROM by BAIKAL ? IS VERY STABLE AND efficient.

[email protected] said:
For me... how I CAN get restore a oryginal boot loader ?
Beacuse when I try power on, I will see blinkling green led lighgt. It is no good for me. Simple power ON by TWRP (RESTART system) is hopeless . This ROM in my opinion is very slow. EVERYDAY (from 04.2018) I use RUSIAN ROM by BAIKAL ? IS VERY STABLE AND efficient.
Click to expand...
Click to collapse
There are only two option for Roms : 1. Is this nougat from aserge ( aka Hero of Labs)
2. An EUI 5.9.021S either by moto , or an more better one , by me , link to that : https://forum.xda-developers.com/le-max-2/how-to/le-max-3-eui-5-9-21s-diamantik-t3834291
Both requiere an unlocked bootloader and an TWRP installed , and there is no fix for blinking green led when powering on .
I mention that in my ROM post

Diamantik Can I back to oryginal Bootloader without blinking power LED ? It is possibile uninstall TWRP ?
Now I want install Rusian ROM By Bajkał ? Sorry but this lock when i try simply switch power on is very annoying.

[email protected] said:
Diamantik Can I back to oryginal Bootloader without blinking power LED ? It is possibile uninstall TWRP ?
Now I want install Rusian ROM By Bajkał ? Sorry but this lock when i try simply switch power on is very annoying.
Click to expand...
Click to collapse
Well i have not tried yet this , i have not found this very annoying .
I think you can fastboot the ROM , this way the TWRP will be replaced with the stock recovery , but i don't know if this will lock back the bootloader , i suggest you to post in our thread " LeEco Le Max 3, X850 by Generaljan " this question , there will be seen by more , maybe there will be someone who tried to lock back the bootloader , but keep in mind , before doing something ,do some research if don't want an brick , and an minus 30 $ from your pocket for QFIL repair

[email protected] said:
Now I have a unlock boot loader , but I don't know how I can flash the .zip file or part of extract .
Can I flash it by one command ?
Click to expand...
Click to collapse
Installed TWRP?

diamantik said:
Well i have not tried yet this , i have not found this very annoying .
I think you can fastboot the ROM , this way the TWRP will be replaced with the stock recovery , but i don't know if this will lock back the bootloader , i suggest you to post in our thread " LeEco Le Max 3, X850 by Generaljan " this question , there will be seen by more , maybe there will be someone who tried to lock back the bootloader , but keep in mind , before doing something ,do some research if don't want an brick , and an minus 30 $ from your pocket for QFIL repair
Click to expand...
Click to collapse
Many thanks for Your information.
Correct me if I am wrong.
To turn on the phone with TWRP installed and the green LED blinking, I need to:
1 hold the vol up + power button
2. Go to TWRP mode
3. select REBOT
4. select the system
Only then will the phone start the system
do you know a simple method to start the phone?
I will check your ROM tonight
When unlocking the bootloader, I encountered a problem with Critical UNLOCK bootloader = FALSE
Now I know why this problem occurs for some users
I will write this also in the main thread in the evening. Add this information to your step-by-step instructions, your manual helped me a lot
Some links in your guide do not lead to files you write about - it's worth checking.

[email protected] said:
Many thanks for Your information.
Correct me if I am wrong.
To turn on the phone with TWRP installed and the green LED blinking, I need to:
1 hold the vol up + power button
2. Go to TWRP mode
3. select REBOT
4. select the system
Only then will the phone start the system
do you know a simple method to start the phone?
I will check your ROM tonight
When unlocking the bootloader, I encountered a problem with Critical UNLOCK bootloader = FALSE
Now I know why this problem occurs for some users
I will write this also in the main thread in the evening. Add this information to your step-by-step instructions, your manual helped me a lot
Some links in your guide do not lead to files you write about - it's worth checking.
Click to expand...
Click to collapse
Well my links was the moto links
i will take a look
If your bootloader is unlocked , and TWRP is flashed , you are ready to try the roms
Well is only a way to boot the phone , volume + and power button , this lead you in TWRP , from there " System " then " restart " and all will be good
There are two roms that you can try my EUI 5.9.021S on 6.0.1 , or the Nougat 7.1.1 EUI6
Also why you don't sell this 4 devices ? And buy yourself something more better
Because i don't think that this x850 will be a developer supported device , better sell this 4 devices that you have , and buy something better , maybe an POCOPHONE F1

lucabest2002 said:
fantastic.. if possible add "multilangiuage".. option/language & imput/ add language
Click to expand...
Click to collapse
As far as I know, it's possible to add a language in the settings.

Updated firmware LeMaX3_EUI_6_by_Hero of Labor_final.
-Updated GoogleCamera (shoots in portrait mode).
-Guilt GooglFoto (for the filming of GoogleCamera in portrait mode in the settings of the developer of the camera to check the box "Use Google Photo".
-Changed the launcher for the native from LeEco.
-Changed the keyboard.
-work of GPS is improved.
After fully customizing the firmware to your liking i strongly advise you to freeze applications from the list of ant07.http://4pda.ru/forum/index.php?s=&showtopic=907872&view=findpost&p=76127861