Database Users

[SOLVED]SPL/Radio mismatch HTC Magic 32a

Hi!
I think my phone is bricked... or semi-bricked.
I was using eyegor's radio switcher to switch SPL/Radio/Recovery every time I was changed the rom. I used:
hboot-1.33.2010OldSPL.img
Radio_HTC_PVT_32A_3.22.20.17OldRadio.img
recovery-RA-magic+-v2.2.1-bladyle
everything was nice, but my battery started to die... every day I had to charge it. So I bought a new battery and I thought, it would be nice to be formatted with a stock rom. So I started to install RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe (what I installed the same way like before with success). When it got to update RADIO_V2 my screen goes black and the update failed.
Now when I try to turn the phone on (showing me the same with POWER; BACK+POWER; HOME+POWER; VOL_DOWN+POWER), says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
I can access fastboot from computer, but adb not. I searched all over the internet to find solution to this.
Code:
fastboot oem boot
gives me in output:
Code:
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8F083CA4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 32
(bootloader) TAG:hwid 0x1
(bootloader) TAG:skuid 0x21401
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x2
(bootloader) Device CID is not super CID
(bootloader) CID is VODAPC23
(bootloader) setting.cid::VODAPC23
(bootloader) serial number: HT95XKF02109
(bootloader) commandline from head: no_console_suspend=1 console=null
(bootloader) command line length =365
(bootloader) active commandline: board_sapphire.disable_uart3=0 board_sap
(bootloader) phire.usb_h2w_sw=0 board_sapphire.disable_sdcard=0 smisize=3
(bootloader) 2 androidboot.baseband=3.22.20.17 androidboot.cid=VODAPC23
(bootloader) androidboot.carrier=COMMON androidboot.mid=SAPP10000 android
(bootloader) boot.keycaps=qwerty androidboot.mode=normal androidboot.seri
(bootloader) alno=HT95XKF02109 androidboot.bootloader=1.76.0008 no_consol
(bootloader) e_suspend=1 console=null
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) 69466957
(bootloader) 69784520
(bootloader) 7473
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
FAILED (status read failed (Too many links))
finished. total time: 8.454s
after 2-3 minutes brings up the old rom, but at the beginning force closes and restarts
I tried to install other ruu-s but with no success. I created a goldcard, tried to flash sappimg.zip from RUU_Sapphire_HTC_Europe_2.16.401.6_Vodafone_CZ_release_signed_NoDriver.exe but it fails at the very beginning with "43 main version check fail".
mumilover's fastboot commander's output:
Code:
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.76.0008
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 3.22.20.17
finished. total time: 0.004s
********************************
###Calling fastboot with: getvar version-main###
version-main: 3.05.401.1
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar cid###
cid: VODAPC23âSÐ
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 12
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP10000
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: 0.001s
********************************
I saw mumilover helped to someone with almost the same problem, maybe he or someone can help me.

So it can't be solved...
If someone in Serbia can JTAG, I would be send to him/her and pay for it...

Don't know why I was thinking like a noob... a had already extracted the RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and I always tried to flash only the rom.zip which failed at radio update. So now I tried to flash the other zip... rom1.zip
Now I have working hboot, fastboot and a system which I cant access

It looks like no one can help me...
I tried to make a goldcard, with two cards. The first was 4gb Kingston sdcard and the second one is a noname 512mb sdcard. Without my goldcards I get Model ID error. With the goldcard inserted (never mind which one) I pass this check, but fails at main version check. I read on many forums and tutorials how to make a goldcard... On these sites I found many answers. Someone says the goldcard is good when passes the Model ID check. But there are a few responds where they say they can pass the main version check... Somewhere on this forum with almost the same problem (SPL/Radio mismatch) someone wrote that he had to make three goldcards to pass the main version check, but with first two he passed only the Model ID check...
Now I'm a little bit confused... I would appreciate if someone can confirm that the goldcard is then a good goldcard when it can pass the main version check (in RUU - ERROR 140 - BOOTLOADER VERSION ERROR).
If someone confirms this I will buy more sdcard (because I bought my phone without a sdcard (for those sdcards which comes with the phone everyone says these are good for creating a goldcard (said on the forums)) before two years)...

... and sorry for my really bad english

more than 140 views and no one replied...
wondering...
if XTC Clip can help me?

I wrote you a pm.
"Main version is older" is not something which a goldcard can fix...
But we can fix that :0)
We just need to get into the system, flash a different misc partition and you should be able to flash a different ruu file.
Once we have a matching spl/radio combo, we can flash a different combo matching your device (32A).

I have to say... many thanks to mumilover, because he wanted to help me. I told him in Monday that I ordered a XTC Clip by Raskal and I want to try it first... Today I got the Clip and successfully unlocked it... it said S-OFF and showed in fastboot:
before:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
after:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.0008 (SAPP*****)
CPLD-12
RADIO-3.22.20.17
downloaded the original ROM, which was for me RUU_Sapphire_HTC_Europe_2.16.401.6_Vodafone_CZ_release_signed_NoDriver because of my phone was VODAPC23... now in fastboot with command:
fastboot oem boot
it gives me "CID is super CID" and "setting.cid::11111111"
when the unlock succeeded I type in cmd:
fastboot oem rebootRUU
unpacked, the downloaded RUU and installed the "update"(downgrade):
fastboot flash zip rom.zip
everything went well! So now my phone works like new, but it is unlocked If someone will have same problem I suggest to buy a XTC Clip from Raskal...

Anyway, how can I make it solved?

How did you do it?
I have the same issue. My phone is stuck in ruu mode. I have an xtc clip but when I try it, it does nothing. I assume its because the phone is still stuck in ruu mode but how do I get it out of ruu mode?
Can you help me?
SPL and Radio are exactly as above.
Thanks.

Here is my exact device info.
...........................................................
Operating system: Windows.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.76.0008.
Radio version: 3.22.20.17.
Main software version: 3.05.401.1.
cid: roger001.
cpld: 12.
product: sapphire.
mid: sapp50000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.

To get into fastboot/hboot and get rid of ruu screen:
1.a. Download RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and extract it.
Find rom.zip and rom1.zip files
1.b. Or download rom.zip and rom1.zip
2. Put these zip files in the same folder where is fastboot.exe
3. Connect your phone to PC in RUU mode
4. Run the commands from the same directory:
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
This will fail. Disconnect the phone, get the battery out for 10secs, put back and connect to PC.
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom1.zip
This will be successfully installed. And now you have fastboot/hboot. In XTC Clip make the goldcard. Put the card in the phone and power on with VOLUME_DOWN+POWER.

jeBACH said:
To get into fastboot/hboot and get rid of ruu screen:
1.a. Download RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and extract it.
Find rom.zip and rom1.zip files
1.b. Or download rom.zip and rom1.zip
2. Put these zip files in the same folder where is fastboot.exe
3. Connect your phone to PC in RUU mode
4. Run the commands from the same directory:
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
This will fail. Disconnect the phone, get the battery out for 10secs, put back and connect to PC.
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom1.zip
This will be successfully installed. And now you have fastboot/hboot. In XTC Clip make the goldcard. Put the card in the phone and power on with VOLUME_DOWN+POWER.
Click to expand...
Click to collapse
Thanks.
I figured this out last night but thanks anyway.
Just to add, to get back to a bootable system, I had to flash another rom after completing the above steps.

Is there a way to get the Tom and rom1 rehosted? If not where can i get it from?

tlipur said:
Is there a way to get the Tom and rom1 rehosted? If not where can i get it from?
Click to expand...
Click to collapse
You can get the ROM from HTC Dev. You need to sign up for an HTC Dev account and then go to the HTC bootunlocker page (you have to google as I'm not allowed to post the link). You can download the RUU there and then once downloaded open the file and when its open go to %temp% (or your temp file directory) and find the most recent modified folder. Inside of there you will find another folder which will contain, amongst other things rom[1].zip file(s).

rom.zip
rom1.zip

Awesome thanks
Sent from my GT-P7510 using Tapatalk 2

[GUIDE] How to extract RUU & manually flash rom.zip HTC One M7

So, you may have made a bad flash, having trouble to S-OFF or just want to go back to 100% stock ROM and recovery. In that case, the easiest solution is to run your RUU (ROM Update Utility). But unlike the conventional method, this guide is about extracting the rom.zip from your RUU for a faster and more comprehensive installation. The extracted rom.zip will also allow the possibility to decrypt the RUU in order to get access to all the individual files inside the encrypted archive. So, if you want to flash, for example, only the stock recovery, you can do it without having to flash the entire RUU ROM, which will restore the phone's entire software.
Note: Your HTC One can be either S-ON or S-OFF in order to successfully flash RUU rom.zip. But if your device is S-OFF, you do not need to re/lock your bootloader.
Follow the instructions in the given order to avoid any hiccups or possible bricking of your device:
1. You will need to know your HTC One's MID and CID. These codes will allow you to find the required RUU for your phone.
You need adb and fastboot. Go to your Bootloader. Select Fastboot. Connect your HTC One with its original USB cable to your PC. Do:
Code:
fastboot getvar all
and you should see a list of important information about your device. In particular, note the modelid (MID) and cidnum (CID). If you get nothing, there is an issue with the USB connection between your phone and PC.
2. Find the correct RUU. Here's a thread: http://forum.xda-developers.com/showthread.php?t=2428276 to find the correct RUU from the filename but more importantly, make sure that both the MID and CID match exactly with your device. You also need to pay attention if you need the M7 UL or M7 U version, which is in the filename of the RUU. If you can't find your RUU from that site, just google or search on XDA. However, not all HTC One variants have RUUs. But if you are already S-OFF, you can change your MID and CID, which will allow you to use any RUU: http://forum.xda-developers.com/showthread.php?t=2322820
3. Extract the RUU and grab the rom.zip file. This is the most important file you need from the RUU and afterwards you can delete the RUU exe if you want. To get the rom.zip from your RUU exe file, you just need to run the RUU exe file once, and then when the window is ready and waiting for you to press on the "Next" button, just leave it open and go to your temp folder. I'm using Windows XP SP3 32-bit and my temp folder is located at this path: C:\Documents and Settings\Administrator\Local Settings\Temp
Now, you will see several files and folders. Sort everything in that temp folder based on "Date Modified" with the most recent folder showing up above all other folders. This is the folder you want. The folder name will be bunch of letters and numbers. Inside that folder you will find several files, but what you need is rom.zip and android-info.txt. Copy both these files and paste them somewhere safe on your hard drive. The android-info.txt contains crucial information about the compatibility of that RUU for your phone. Here's the android-info.txt extracted from my RUU exe:
Code:
modelid: PN0711000
cidnum: HTC__001
cidnum: HTC__J15
cidnum: HTC__A48
cidnum: HTC__M27
mainver: 1.29.401.2
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
You can then verify that you have the correct RUU if the modelid matches that of your phone and if you can see your cidnum in that list. If either (or both) of the modelid or cidnum does not match that of your phone, the RUU process will fail. The mainver is the firmware that is going to be flashed onto your phone.
For easy reference, create a new folder and name it exactly like the RUU exe file and put the rom.zip and android-info.txt in there so you won't have trouble identifying that rom.zip file later if you need to flash it again. Now, you can close the RUU installation window and all the files in that temp folder containing rom.zip will be instantly erased. Note that if you open the rom.zip with Winzip/Winrar, you will see a list of all the files but if you try to extract or double-click to open any of these files, you will get an error saying that the file is corrupt. This warning is only due to the files being encrypted by HTC, since the RUU is an official release and is digitally signed. To access those encrypted files, you will need to decrypt them on Linux.
4. Go to your bootloader. Do:
Code:
fastboot oem rebootRUU
This will reboot your HTC One and you will see a black screen with a silver HTC logo.
Now, you will need to access the rom.zip file and flash it. I have copied my rom.zip to my adb folder located at: C:/mini-sdk/rom.zip
So, i type:
Code:
fastboot flash zip C:/mini-sdk/rom.zip
Don't touch anything during the flash process. It will start and after some time, you will see FAILED error. Don't worry, it's the file preparation process if you have firmware higher than that of the RUU. Just do the same command again and the flash process will complete successfully this time. Look at the Command Prompt to know when the flash is complete. At the same time if you look at your phone, you will notice a green progress bar. When the flashing is complete on the Command Prompt, you will notice that the green bar is stuck at about 95%. This is normal. It's just a bug in the progress bar - what matters is the output from the Command Prompt window.
5. Then, you reboot. Do:
Code:
fastboot reboot
This will restart your phone. Let it boot up. It might take a little longer for the first boot up sequence. You will then have completely stock software (firmware & ROM). Go to your bootloader and check. Your S-ON/OFF and Bootloader lock/unlock are unchanged from before the RUU rom.zip flashing procedure. You can now also receive OTA updates.
I hope this has been helpful. Just press the THANKS button! :good:

If you're S-OFF you do NOT need to relock the bootloader to flash an RUU - just putting that out there

Opening android-Info.txt
Hey man,
as first thanks a lot, i got it all thanks to you but i'm still having trouble finding the right RUU.
I know you said that opening android-info.txt would help, and that it wont work with WinRar.. which i can see.
I have downloaded the .zip RUU, so.. my question is how do i open this txt file if not without WinRar.
Thanks again

emir1396 said:
Hey man,
as first thanks a lot, i got it all thanks to you but i'm still having trouble finding the right RUU.
I know you said that opening android-info.txt would help, and that it wont work with WinRar.. which i can see.
I have downloaded the .zip RUU, so.. my question is how do i open this txt file if not without WinRar.
Thanks again
Click to expand...
Click to collapse
You don't know how to open a .txt extension file? :cyclops:
Just use any text viewer/editor. I use Notepad++ and you can download it here: http://notepad-plus-plus.org/

Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"
---------- Post added at 08:00 PM ---------- Previous post was at 08:00 PM ----------
Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"

italgal said:
Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"
Click to expand...
Click to collapse
Where do you get this error? At which step? Please provide more information to help resolve your problem.

i try to install many ruu i need ruu 4A.17.3250.14

thanks I will try this method in future.:good::good::good:

i have those
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38XW900273
(bootloader) imei: 354435053862991
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s

italgal said:
i have those
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38XW900273
(bootloader) imei: 354435053862991
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Click to expand...
Click to collapse
4A.17.3250.14 is baseband version
you need to search for an RUU based on cidnum and model id
judging from your cid .. "HTC_K18" ..its kinda rare .. i think your cid belongs to Israel and to my knowledge there is no RUU for your model

Please Help
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
flash zip
Click to expand...
Click to collapse
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
---------- Post added at 10:29 PM ---------- Previous post was at 10:17 PM ----------
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
Quote:
flash zip
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal

DrDrake23 said:
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
---------- Post added at 10:29 PM ---------- Previous post was at 10:17 PM ----------
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
Quote:
flash zip
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
Click to expand...
Click to collapse
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2

fridgeman said:
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Lol that's not what that error is. That's a signature verify fail and I'm pretty sure that means they're trying to flash an unsigned file or a file for another CID on a phone with security on.

Didn`t work
fridgeman said:
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I did it still the same thing
---------- Post added at 03:33 PM ---------- Previous post was at 03:18 PM ----------
xcesivemastub8ah said:
Lol that's not what that error is. That's a signature verify fail and I'm pretty sure that means they're trying to flash an unsigned file or a file for another CID on a phone with security on.
Click to expand...
Click to collapse
Yes i got S-ON please help me what can i do to make it work

Iam using mac, can i use this steps or not? I have sucseed to unlock my htc one S-on but when i try to do recovery the mobile stucks every time ,

@DrDrake23
To find the correct RUU compatible with your HTC One, you need to look at these information:
modelid: PN0710000
cidnum: HTC__032
Then search for the RUU. I was able to find 2 versions at this location: http://www.htc1guru.com/downloads/ruu-file-downloads/
Also, according to this list: http://forum.xda-developers.com/showthread.php?t=2445289 your CID matches the region HTC-EastEurope HTC__032
These 2 RUU's should work for your device. You need to use only one of these.
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
or
RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed
It is usually recommended to use the most recent RUU. In this case, you should first try the 1.28.401.7 RUU.
However, read the description in the comment section on the site for each of these RUU's.
From your phone information:
version-main: 3.62.401.1
This means that you will need to S-OFF first before you are able to run the RUU since your main version is higher than both of these RUU's.
On another note, you should always read up and do enough research before attempting to modify your phone. Do you really need to go back to 100% stock? You could simply flash a stock ROM or even better, a custom ROM. But if you believe you need to return your device to 100% stock condition, start here: http://forum.xda-developers.com/showthread.php?t=2488772 and then you can flash hboot 1.44 and finally run the RUU.

marjanna said:
Iam using mac, can i use this steps or not? I have sucseed to unlock my htc one S-on but when i try to do recovery the mobile stucks every time ,
Click to expand...
Click to collapse
I tested the entire procedure successfully on my Windows XP SP3 32-bit. So, i cannot say if this would work on another OS or if the commands would be the same for that matter. Maybe someone with a Mac can confirm and help you out.

electronical said:
I tested the entire procedure successfully on my Windows XP SP3 32-bit. So, i cannot say if this would work on another OS or if the commands would be the same for that matter. Maybe someone with a Mac can confirm and help you out.
Click to expand...
Click to collapse
Ok i see. It seems that most use pc:s , i have tryied and still trying to find a Mac user , but no luck so far,
I got a 4.2.2 HTC One
HTC Sense Version 5.0
S-On
Unlocked
Tampered
I have heard that its better and safer to change the S-On to S-Off but no luck yet. this guide looks great but i might wait to be secure so i dont brick the phone trying to.
Take care and thanks for replying ..
:laugh::good::laugh::good::laugh:

This process saved me.
I had a bad flash and could not get adb to recognize my device.
Just a quick note, bootlocker must be re-locked if you on S-on.
Thanks for the help man!

DrDrake23 said:
I did it still the same thing
Yes i got S-ON please help me what can i do to make it work
Click to expand...
Click to collapse
If u are s-on you have to re-lock the bootloader...

[ORIGINAL FIX] TO GET RID OF Data Encryption Problem On AOSP & Other Roms

The solution is very simple and ive tested it on more then 5 different senarios when i get the bug.
1. install TWRP recovery (you can even sideload it with fastboot if you dont wanna install it on phone(if you got stock recovery etc.), with this command "fastboot boot openrecovery-twrp-2.7.1.0-m8.img"
2. make a full wipe, check all boxes except external SD :highfive:, that will erase /data/media and also /data where the encryption bug lies.
3. install your ROM or restore your ROM from backup.
4. then reboot recovery and flash the recovery you want (or sideload it with the command above).
5. done, now the encryption bug is gone :good:
if this still dont work, try the solution given by maxrdlf95 in his thread here http://forum.xda-developers.com/showthread.php?t=2773203

smaberg said:
The solution is very simple and ive tested it on more then 5 different senarios when i get the bug.
1. install TWRP recovery (you can even sideload it with fastboot if you dont wanna install it on phone(if you got stock recovery etc.), with this command "fastboot boot openrecovery-twrp-2.7.1.0-m8.img"
2. make a full wipe, check all boxes except external SD :highfive:, that will erase /data/media and also /data where the encryption bug lies.
3. install your ROM or restore your ROM from backup.
4. then reboot recovery and flash the recovery you want (or sideload it with the command above).
5. done, now the encryption bug is gone :good:
if this still dont work, try the solution given by maxrdlf95 in his thread here http://forum.xda-developers.com/showthread.php?t=2773203
Click to expand...
Click to collapse
So, what youre basically saying is wipe data? I think the point is most people dont wanna do that, and doesnt the other fix allow you to fix the issue without wiping? Just trying to understand...

mikeyinid said:
So, what youre basically saying is wipe data? I think the point is most people dont wanna do that, and doesnt the other fix allow you to fix the issue without wiping? Just trying to understand...
Click to expand...
Click to collapse
Make a full backup of your ROM first, then my steps (cwm, philz won't work).
Then Restore backup...
Philz and cwm won't wipe the important parts, so with them the bug will still be there. So twrp with all options check will do the trick.

This method worked for me. I selected all options except external sd card when wiping. Wiping failed. Then I went to format data, typed in "yes" and formatted my internal storage. I then went back to select all option to wipe everything and surprisingly "It Worked", I was able to wipe everything and restore my rom successfully.
Thanks for this!!! (AT&T User!)

Sorry...wrong thread

My phone Isn't Rooted nor has the bootloader is Unlocked
smaberg said:
The solution is very simple and ive tested it on more then 5 different senarios when i get the bug.
1. install TWRP recovery (you can even sideload it with fastboot if you dont wanna install it on phone(if you got stock recovery etc.), with this command "fastboot boot openrecovery-twrp-2.7.1.0-m8.img"
2. make a full wipe, check all boxes except external SD :highfive:, that will erase /data/media and also /data where the encryption bug lies.
3. install your ROM or restore your ROM from backup.
4. then reboot recovery and flash the recovery you want (or sideload it with the command above).
5. done, now the encryption bug is gone :good:
if this still dont work, try the solution given by maxrdlf95 in his thread here http://forum.xda-developers.com/showthread.php?t=2773203
Click to expand...
Click to collapse
Hello, I have the same Issue, just that my bootloader is locked, the phone has never been rooted, here's an image of the phone, also here's a getvar from the phone.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.26.21331147A1.16G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.24.709.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: F********500
(bootloader) imei: 3*************5
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 59ee16dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.027s
I also tried to manually format userdata, flash recovery, flash boot and this is what I get:
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.005s
target reported max download size of 1826410496 bytes
sending 'recovery' (16050 KB)...
OKAY [ 1.475s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.056s

erickobain said:
Hello, I have the same Issue, just that my bootloader is locked, the phone has never been rooted, here's an image of the phone, also here's a getvar from the phone.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.26.21331147A1.16G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.24.709.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: F********500
(bootloader) imei: 3*************5
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 59ee16dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.027s
I also tried to manually format userdata, flash recovery, flash boot and this is what I get:
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.005s
target reported max download size of 1826410496 bytes
sending 'recovery' (16050 KB)...
OKAY [ 1.475s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.056s
Click to expand...
Click to collapse
Unlock the bootloader.

It wont let me...

erickobain said:
It wont let me...
Click to expand...
Click to collapse
Nobody is going to know what that means. You need to provide details and specifics on what you tried, what exact step you got stuck, including details on error messages or other results on the phone's screen, computer screen, etc.
Responding with one sentence like you did, and expecting anyone to be able to help, is not the proper way to post or ask for help.
You can't install TWRP with a locked bootloader. You need to unlock the bootloader via HTCDev.com. If you had problems with the bootloader unlock process, you need to be specific on what step, and what errors you encountered; of you expect us to advise you.

Htc desire 816 no os , no cwm/twrp

C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.555 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 7(s)
MY GETVAR
C:\Users\Admin\.android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA484MZ00350
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: A1000037D94F05
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 13(ms)
And i Get this error
C:\Users\Admin\.android>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 3(ms)
Help Me Out!!!
My Device Is HTC DESIRE 816 Dual Sim (INDIA)

sujay123 said:
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.555 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 7(s)
MY GETVAR
C:\Users\Admin\.android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA484MZ00350
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: A1000037D94F05
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 13(ms)
And i Get this error
C:\Users\Admin\.android>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 3(ms)
Help Me Out!!!
My Device Is HTC DESIRE 816 Dual Sim (INDIA)
Click to expand...
Click to collapse
Do you have HTC drivers installed?
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Do you have HTC drivers installed?
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
Yeah I guess, I'm new to this stuff. So could you be a bit more Specific.

sujay123 said:
Yeah I guess, I'm new to this stuff. So could you be a bit more Specific.
Click to expand...
Click to collapse
Do you have HTC Sync installed is what I'm asking
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Do you have HTC Sync installed is what I'm asking
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
Yeah, But its unable to recognize the device.

sujay123 said:
Yeah, But its unable to recognize the device.
Click to expand...
Click to collapse
1st. Remove imei and imei 2 from first post for safety reasons.
2. Uninstall HTC Sync but keep everything else it installed..
3. Make sure you have Java installed ( not sure if you need it , but I always have it installed )
4. Have you tried flashing the zip again ? Boot loader locked ?
fastboot flash zip (name of zip)
If fails it should say flush again.. then redo the command.
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
1st. Remove imei and imei 2 from first post for safety reasons.
2. Uninstall HTC Sync but keep everything else it installed..
3. Make sure you have Java installed ( not sure if you need it , but I always have it installed )
4. Have you tried flashing the zip again ? Boot loader locked ?
fastboot flash zip (name of zip)
If fails it should say flush again.. then redo the command.
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
1) Done
2) Done
3) Have It
4)
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.558 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 6(s)
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.554 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 6(s)
C:\Users\Admin\.android>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 0(ms)

sujay123 said:
1) Done
2) Done
3) Have It
4)
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.558 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 6(s)
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) OKAY
sending time = 2.554 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 6(s)
C:\Users\Admin\.android>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 0(ms)
Click to expand...
Click to collapse
Okay lock boot loader first if it's already unlocked
fastboot oem lock
Then try flashing the zip again.
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Okay lock boot loader first if it's already unlocked
fastboot oem lock
Then try flashing the zip again.
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
C:\Users\Admin\.android>fastboot oem lock
... (bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
(bootloader) WARM RESET: 9
(bootloader) [INFO] Rebooting device
FAILED (status read failed (No such file or directory))
Execution time is 1(s)
And WNIDOWS ERROR : FASTBOOT.EXE Has Stopped Working
Now Waiting for my battery to drain

sujay123 said:
C:\Users\Admin\.android>fastboot oem lock
... (bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
(bootloader) WARM RESET: 9
(bootloader) [INFO] Rebooting device
FAILED (status read failed (No such file or directory))
Execution time is 1(s)
And WNIDOWS ERROR : FASTBOOT.EXE Has Stopped Working
Now Waiting for my battery to drain
Click to expand...
Click to collapse
Okay I need to know what you did that left your phone in the state that it is.
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Okay I need to know what you did that left your phone in the state that it is.
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
First I Rooted it, Via CWM
Then I tried to Partition My SD card ,but failed , so i got it back to its original state.
Then Tried to install some random theme.zip through CWM
That's when the problem started (Stuck At black screen on Booting)
Then I'm not sure about this : I probably formatted the SYSTEM via CWM (Probably the reason for absent OS)
And I'm Not sure how I lost CWM : probably while flashing stock recovery.img (via Fastboot)
and then FASTBOOT OEM LOCK, tried to unlock it but i keep getting the same error.
and then i downloaded and installed this HTC SPECIAL FASTBOOT DRIVER DOWNLOAD & ADB SETUP DRIVER
and again tried to flash RECOVER.IMG, but failed.
So I Repeated the unlock procedure from the HTC website.
I get option , I select unlock , The Device REBOOTS, and FASTBOOT OEM UNLOCK : FAILED
But , even then I try to Flash 0P9CIMG.zip which fails again and again.
I have no Idea Whats going on
I can only Access the bootloader menu.
Cannot Access recovery , a red triangle and ! appears.
PLEASE TELL ME YOU HAVE A SOLUTION.
I'M READY TO DOWNLOAD A NEW RECOVERY.IMG AND RUU FOR A5_DWG

sujay123 said:
First I Rooted it, Via CWM
Then I tried to Partition My SD card ,but failed , so i got it back to its original state.
Then Tried to install some random theme.zip through CWM
That's when the problem started (Stuck At black screen on Booting)
Then I'm not sure about this : I probably formatted the SYSTEM via CWM (Probably the reason for absent OS)
And I'm Not sure how I lost CWM : probably while flashing stock recovery.img (via Fastboot)
and then FASTBOOT OEM LOCK, tried to unlock it but i keep getting the same error.
and then i downloaded and installed this HTC SPECIAL FASTBOOT DRIVER DOWNLOAD & ADB SETUP DRIVER
and again tried to flash RECOVER.IMG, but failed.
So I Repeated the unlock procedure from the HTC website.
I get option , I select unlock , The Device REBOOTS, and FASTBOOT OEM UNLOCK : FAILED
But , even then I try to Flash 0P9CIMG.zip which fails again and again.
I have no Idea Whats going on
I can only Access the bootloader menu.
Cannot Access recovery , a red triangle and ! appears.
PLEASE TELL ME YOU HAVE A SOLUTION.
I'M READY TO DOWNLOAD A NEW RECOVERY.IMG AND RUU FOR A5_DWG
Click to expand...
Click to collapse
Have you tried placing zip on external SDCard and name it 0P9CIMG.zip and let the boot loader do the RUU Update it's self.
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Have you tried placing zip on external SDCard and name it 0P9CIMG.zip and let the boot loader do the RUU Update it's self.
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
Okay I Think This is it (Hope It Works)
Flashing ZIP file....
:fingers-crossed:
Do you Want to Start Update
<VOL UP> Yes
<VOL DOWN> No
Going With Yes

sujay123 said:
Okay I Think This is it (Hope It Works)
Flashing ZIP file....
:fingers-crossed:
Do you Want to Start Update
<VOL UP> Yes
<VOL DOWN> No
Going With Yes
Click to expand...
Click to collapse
Well?
Sent from my HTC Desire EYE using Tapatalk

xXminiWHOOPERxX said:
Well?
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
I got the OS- (2.34.720.1)
Update is in progress
flashing zip file
Is this it?

xXminiWHOOPERxX said:
Well?
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
OMG :crying: Thank you So Much , I LOVE YOU.
Just A few More Queries
1 ) Can/How Do I Unlock OEM
2) How do I get to know the status of My Device rooted/unrooted
3) Which one is preferred CWM/TWRP , and do I put it back using the normal procedure.?
4) Can I modify/Change the Stock recovery.img
5) Should I install the SuperSU.zip/apk

sujay123 said:
OMG :crying: Thank you So Much , I LOVE YOU.
Just A few More Queries
1 ) Can/How Do I Unlock OEM
2) How do I get to know the status of My Device rooted/unrooted
3) Which one is preferred CWM/TWRP , and do I put it back using the normal procedure.?
4) Can I modify/Change the Stock recovery.img
5) Should I install the SuperSU.zip/apk
Click to expand...
Click to collapse
1) To sim unlock I'm unsure of because I don't own a dual sim device ..
Unlock boot loader on htcdev.com
2&3) install official twrp from their website and download SuperSU 2.56
Sent from my HTC Desire EYE using Tapatalk

Red triangle with stock recovery flash
Cannot Access recovery , a red triangle and ! appears.
Just to chime in on the red triangle issue . I had that same issue when reflashing my stock recovery back to my rooted 816 single SIM and the issue was that the stock recovery was there but had that screen due to the fact that I had altered the phone and the triangle is an indicator of that for HTC I guess. I was able to get into the stock recovery by pressing and holding the power button then pressing volume up and waiting . When the stock recovery screen shows up you release the volume button I believe but it might be releasing both. It's been a while. Either way I got into the stock recovery but I ended up just reflashing TWRP custom recovery back and not doing my stock update as the zip file kept failing. Glad you got expert help with your issues and got it resolved.

sujay123 said:
C:\Users\Admin\.android>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (38480 KB) O
And i Get this error
C:\Users\Admin\.android>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 3(ms)
Help Me Out!!!
My Device Is HTC DESIRE 816 Dual Sim (INDIA)
Click to expand...
Click to collapse
Could u plz post the link to that zip file, becos im also using a5dwg

thoctor said:
Cannot Access recovery , a red triangle and ! appears.
Just to chime in on the red triangle issue . I had that same issue when reflashing my stock recovery back to my rooted 816 single SIM and the issue was that the stock recovery was there but had that screen due to the fact that I had altered the phone and the triangle is an indicator of that for HTC I guess. I was able to get into the stock recovery by pressing and holding the power button then pressing volume up and waiting . When the stock recovery screen shows up you release the volume button I believe but it might be releasing both. It's been a while. Either way I got into the stock recovery but I ended up just reflashing TWRP custom recovery back and not doing my stock update as the zip file kept failing. Glad you got expert help with your issues and got it resolved.
Click to expand...
Click to collapse
I had tried every combination, nothing worked. It was either restart or was stuck at the boot screen (HTC white Logo) or a Black screen.
Yeah me too!!

Anywhere to download 1.64.709.12 RUU & identify the phone region?

Messed up few things and now need to revert back to stock. Looked through HTC dev site and cant' find any. Thanks.
PS C:\adb> fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_ocedugl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 1.64.709.12
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZF20000
(bootloader) cid: HTC__621
all:
finished. total time: 0.016s

Found it. Region is Taiwan. Download link: https://androidfilehost.com/?fid=962021903579498682

what a waste of a download that was thanks wasnt even an ruu just full of zip's and cant be extracted into a bigger file

You don't need to extract the zip. Rename zip to 2PZFIMG & copy to root of SD Card (2nd sim slot). Turn off the phone and enter download mode. Phone will detect the RUU file & confirm the flash.

starfarer said:
You don't need to extract the zip. Rename zip to 2PZFIMG & copy to root of SD Card (2nd sim slot). Turn off the phone and enter download mode. Phone will detect the RUU file & confirm the flash.
Click to expand...
Click to collapse
i realized it in the end and managed to successfully get my phone working again and running oreo, so thanks and apologies for the tone it was because i was pi**ed at HTC for soft bricking my ultra!!