I am somewhat new at rooting, though I have rooted 3 phones. I was rooted on Android 4.4.2 and when I flashed a ROM for 5.0 my screen turned black. It won't turn on, I can't get into recovery or download mode, and when I connect it to my computer through USB it registers it as QHSUSB_BULK. I am stuck right now, is a JTAG the only way to fix it?
vexxid said:
I am somewhat new at rooting, though I have rooted 3 phones. I was rooted on Android 4.4.2 and when I flashed a ROM for 5.0 my screen turned black. It won't turn on, I can't get into recovery or download mode, and when I connect it to my computer through USB it registers it as QHSUSB_BULK. I am stuck right now, is a JTAG the only way to fix it?
Click to expand...
Click to collapse
Does it charge or at least get warm? What ROM did you flash? Did you flash it via safestrap?
Can you access that bulk folder on your computer?
Tulsadiver said:
Does it charge or at least get warm? What ROM did you flash? Did you flash it via safestrap?
Can you access that bulk folder on your computer?
Click to expand...
Click to collapse
I don't know if it is charging and I flashed a rooted stock ROM for 5.0 (OA8) and it was via safestrap. How would I access the bulk folder, as it says driver is not installed?
A Verizon ROM? I thought you said a folder came up on your PC called something bulk.
Tulsadiver said:
A Verizon ROM? I thought you said a folder came up on your PC called something bulk.
Click to expand...
Click to collapse
It is not a folder, it detects my phone through usb as that. I don't know why, maybe I flashed the wrong ROM?
You were supposed to go back into download mode from safestrap and flash the OA8 kernel
Tulsadiver said:
You were supposed to go back into download mode from safestrap and flash the OA8 kernel
Click to expand...
Click to collapse
After further investigation, the file I flashed was OA1, but the download said OA8. I should have been more careful. Is there anything I can do now?
It probably is a brick. Pull your your battery for at least 10 minutes and try again. Still not sure where it is saying bulk folder.
Tulsadiver said:
It probably is a brick. Pull your your battery for at least 10 minutes and try again. Still not sure where it is saying bulk folder.
Click to expand...
Click to collapse
Okay, I will get back to you on that in around 15-20 minutes. And it does not have a bulk folder anywhere, what happens is an alert pops up on bottom of screen saying "driver not successfully installed" and when I click to check the driver it says QHSUSB_BULK where it should say Galaxy s5. Hopefully you understand, as I want to fix my phone.
Oh, under devices. This is probably a brick. Sorry.
Tulsadiver said:
Oh, under devices. This is probably a brick. Sorry.
Click to expand...
Click to collapse
How can I fix it, and how can I tell if it is a hard brick or a soft brick? Also, after 10 minutes with battery out, I cant turn on, or boot into recovery/download mode.
Try charging it. If it doesn't even feel warm it is a hard brick.
Tulsadiver said:
Try charging it. If it doesn't even feel warm it is a hard brick.
Click to expand...
Click to collapse
Anything I can do from that point on?
Like you mentioned, JTAG. There are JTAG services out there. I actually bought a riff box because I bricked my s4 but I got my warranty company to give me a new phone so I never had to use it.
Tulsadiver said:
Like you mentioned, JTAG. There are JTAG services out there. I actually bought a riff box because I bricked my s4 but I got my warranty company to give me a new phone so I never had to use it.
Click to expand...
Click to collapse
Ok, thank you for all your help.
Is it under warranty?
Tulsadiver said:
Is it under warranty?
Click to expand...
Click to collapse
yes, and I just did some google searches and is there a way to use a debrick.img or something on sd card to fix?
vexxid said:
yes, and I just did some google searches and is there a way to use a debrick.img or something on sd card to fix?
Click to expand...
Click to collapse
Here is a debrick IMG. I'm on 4.4.4 so I'm not sure it will work.
Edit. I think I'll have to make one 4.4.2 specific. I'll get back to you.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Tulsadiver said:
Here is a debrick IMG. I'm on 4.4.4 so I'm not sure it will work.
Edit. I think I'll have to make one 4.4.2 specific. I'll get back to you.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Thank you so much. One question though, what is the file extension, should it be .img?
vexxid said:
Thank you so much. One question though, what is the file extension, should it be .img?
Click to expand...
Click to collapse
What I gave you is what the debrick creator spit out.
Related
Well, today I tried setting up ClockworksMod so I could easily backup and restore my phone as needed. (As previous work i had caused issues and it wouldnt reboot until i reinstalled the rom)
Well, clockworkmod recovery would not install through the app, so I installed the image through Odin, and that worked flawlessly. I was able to backup and restore.
After it booted back up I was unable to add a new google account or erase the old one. Factory resetting it would casue it to get stuck in the boot loop again, until i restored it or reflashed.
Eventually I tried flashing another image, with repartition turned on.
Well, without surprise Windows 7 semi crashed and killed Odin.
Now when my phone "turns on" all i see is black. Nothing happens. I cant do any of the 3 button combos to get into Recovery or Download mode
Can anybody help me? I need to get this working ASAP!
Thanks
Edit : I need to check my eyes. I thought you can get into download mode.
If you cannot get to download mode with the 3-button-combo then you'll need a jig.
Intratech said:
If you cannot get to download mode with the 3-button-combo then you'll need a jig.
Click to expand...
Click to collapse
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me
Can I have your battery cover to keep as a spare.
bncplix said:
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me
Click to expand...
Click to collapse
You need a jig.
Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.
Intratech said:
You need a jig.
Click to expand...
Click to collapse
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
geko95gek said:
Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.
Click to expand...
Click to collapse
Because it said it was needed for that image i was flashing
bncplix said:
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
Because it said it was needed for that image i was flashing
Click to expand...
Click to collapse
It can still work in some cases, lets hope it does in yours.
Did you get that advise about repartitioning from Samfirmware?
Intratech said:
It can still work in some cases, lets hope it does in yours.
Hopefully! I just ordered one
Did you get that advise about repartitioning from Samfirmware?
Click to expand...
Click to collapse
Yes I did, was that something I shouldn't have done?
It sat on repartitioning for about 15 minutes, then windoes said Odin stopped responding and it killed it :/
I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Those guys at Samfirmware really need to stop telling people to repartition their device for every flash.
Intratech said:
I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Click to expand...
Click to collapse
Well, lesson learned. Today was the first time I even tried installing another ROM
Thanks for the help
Once my Jig comes in, I'll let you all know how it goes!
check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).
lazyb2k said:
check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).
Click to expand...
Click to collapse
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!
i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .
lazyb2k said:
i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .
Click to expand...
Click to collapse
That's another thing I am unsure of, whats the flash counter?
bncplix said:
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!
Click to expand...
Click to collapse
I'm not saying it will work for sure, what I'm saying is depending on the damage done it may still get you into download mode so you can flash the firmware.
bncplix said:
That's another thing I am unsure of, whats the flash counter?
Click to expand...
Click to collapse
to be precise, it's the "custom binary counter" which counts up as soon as you flash something modified manually on your phone. has nothing to do with your problem, though.
We need to find the way to boot the device externally, i.e. bootloader on ext. SDCard or the likes....
I accidentally bricked my phone. All was well, Rooted, Cyanogenmod 10, twrp through goomanager. But when i tried to Flash a ktoonsez kernel for this device 4.2.2 aosp, it said failed and would not boot back up. All i can get is to the "Downloading... Do not turn off target!!" screen. Basically im screwed anybody know how to unbrick her? shes only a day old. ;(
Odin the stock firmware.
old tylivequ
jd1639 said:
Odin the stock firmware.[/QUOTE
Do you have a link to jflteatt odin? All i can find is the ecan version? Im sorry but im kind of a noobie.
Click to expand...
Click to collapse
2 questions: you're certain you can't boot into recovery? Can you tell me any specifics about the kernel (name/date/etc)?
hayden55 said:
jd1639 said:
Odin the stock firmware.[/QUOTE
Do you have a link to jflteatt odin? All i can find is the ecan version? Im sorry but im kind of a noobie.
Click to expand...
Click to collapse
Go to sammobile.com. you can find stock firmware there. You have to register but it's free. You'll download a zip file, use 7-zip to extract the .tar.md5 file from it. Use that in Odin.
Click to expand...
Click to collapse
xBeerdroiDx said:
2 questions: you're certain you can't boot into recovery? Can you tell me any specifics about the kernel (name/date/etc)?
Click to expand...
Click to collapse
ktoonsez kt747. AOSP JELLYBEAN 4.2 Linux 3.4 VERSIONS from the att version galaxy s4 forum. I checked and i was running 3.4 linux and cyanogenmod. Its the most recent as i downloaded an hour ago. Also, i had twrp 2.6 through goo manager. Cannot get to boot to it. Anything but the android download screen all i get is a little haptic feedback and a black screen
jd1639 said:
hayden55 said:
Go to sammobile.com. you can find stock firmware there. You have to register but it's free. You'll download a zip file, use 7-zip to extract the .tar.md5 file from it. Use that in Odin.
Click to expand...
Click to collapse
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
*correction. I found odin3
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
Use mdl. Odin is a separate program and is not us or Canada. Read this guide and use the tar.md5 for your device http://forum.xda-developers.com/showthread.php?p=26056924
Take your time and read the guide more than once. You can permanently brick your device.
Click to expand...
Click to collapse
jd1639 said:
hayden55 said:
Use mdl. Odin is a separate program and is not us or Canada. Read this guide and use the tar.md5 for your device http://forum.xda-developers.com/showthread.php?p=26056924
Take your time and read the guide more than once. You can permanently brick your device.
Click to expand...
Click to collapse
hey thanks for all the help guys! Nice forum. I always read through but have never joined until now. In an hour from now i will have the download Hopefully...
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
hey thanks for all the help guys! Nice forum. I always read through but have never joined until now. In an hour from now i will have the download Hopefully...
Click to expand...
Click to collapse
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
culating humpSno
jd1639 said:
hayden55 said:
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
yeah. I read through the GS2 guide and noted some of the similar stuff for when i do mine
Click to expand...
Click to collapse
jd1639 said:
hayden55 said:
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
I downloaded the file and flashed it with odin. It said passed and the screen had finished the download, but whenever i try and boot the phone i still dont have a boot. Only a black screen with a little vibration every 5~10 seconds? PLEASE... i need help now. I dont need to hear a "I told you so" from my dad. he is anti-root
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
I downloaded the file and flashed it with odin. It said passed and the screen had finished the download, but whenever i try and boot the phone i still dont have a boot. Only a black screen with a little vibration every 5~10 seconds? PLEASE... i need help now. I dont need to hear a "I told you so" from my dad. he is anti-root
Click to expand...
Click to collapse
Did you have "repartition" checked in ODIN? Because if you did, you shouldn't have.
If not, try to get into recovery (if you can) and try a factory reset.
Click to expand...
Click to collapse
scott14719 said:
hayden55 said:
Did you have "repartition" checked in ODIN? Because if you did, you shouldn't have.
If not, try to get into recovery (if you can) and try a factory reset.
Click to expand...
Click to collapse
For some reason my recovery wont work? maybe thats it? all i know is my recovery wont boot, and i flashed a bad kernel. I have my twrp backup on my external sd
Also... all i had checked was auto reboot and f. reset time. I flashed the reset file with pda box checked.
forgot to add. i flashed the file with those two boxes checked and it said pass. I think it must be the kernel or the recovery? how do you flash these in odin? I bet if i can track down the stock kernel and get twrp again it may boot.
Click to expand...
Click to collapse
hayden55 said:
scott14719 said:
For some reason my recovery wont work? maybe thats it? all i know is my recovery wont boot, and i flashed a bad kernel. I have my twrp backup on my external sd
Also... all i had checked was auto reboot and f. reset time. I flashed the reset file with pda box checked. How do i flash a new recovery, maybe that would boot it? If i can get into twrp i have my stock rom backed up and maybe the kernel with it.
Click to expand...
Click to collapse
If you are positive you can not get into 3e recovery, you might want to go to the OUDHS CWM thread in the development section and look at the OP for a method to install that recovery via ADB shell. If you can get it installed, you can then flash another ROM to get up and running. Then, if you desire, you can use GooManager to put TWRP back on your phone and restore a working Nandroid you might have. Or you can just set things up from scratch. But all of this is only if you can get into recovery or get a recovery installed back onto your phone.
If you tried to install the wrong Kernel for your phone, you might be hard bricked, in which case Jtag might be your only hope.
Click to expand...
Click to collapse
scott14719 said:
hayden55 said:
If you are positive you can not get into 3e recovery, you might want to go to the OUDHS CWM thread in the development section and look at the OP for a method to install that recovery via ADB shell. If you can get it installed, you can then flash another ROM to get up and running. Then, if you desire, you can use GooManager to put TWRP back on your phone and restore a working Nandroid you might have. Or you can just set things up from scratch. But all of this is only if you can get into recovery or get a recovery installed back onto your phone.
If you tried to install the wrong Kernel for your phone, you might be hard bricked, in which case Jtag might be your only hope.
Click to expand...
Click to collapse
WHAT! I was hoping it wouldnt come to JTAG. I've heard you can make a jig and then just download their software and do it yourself? But yes, I will go to that thread and check it out. also thanks for the help. this forum is MUCH better than others I have used for various products and what not.
Click to expand...
Click to collapse
I hope you get it figured out. But let me tell you what I DID and had the same outcome with NO RECOVERY at all, black screen with vibrate only. So what your describing sounds EXACTLY what happened to mine.
So I was "TRYING" to make a custom splash screen as I had for my SGS3. (Which messed with the kernel). When I went to boot up after the flash it did the black screen with vibrate.
I COULD get into DOWNOIAD mode but not recovery at all. I tried for a few days. I was worried my battery would be getting low after trying for a few hours. I tried to plug it in and the battery came up but it acted like it was stuck and nothing would happen.
Next I tried to use Odin to flash back to MDL stock firmware. It would flash and said completed. But upon reboot same half/vibrate screen.
Next I tried MDB firmware. STILL a NO GO. I had to send it in for JTAG. I think they had some issues getting it working as well. It arrived on a Thursday, and they did not finish getting it to where their site showed it was completed for 8 days. Then it didn't get sent out for another day. It finally arrived at my house 10 days after they received it. But GLADLY they were able to fix it. So good luck to you. If you do have to resort to JTAG it cost me a total of $90, Almost $30 dollars for me to TWO DAY it to them. $60 for JTAG and rush delivery.
Sent from My Spiderman Themed I337
Sorry to hear Odin didn't work. Odin does put the stock recovery on your phone in the correct partition if every thing goes correctly. But if your hard bricked Odin won't recovery the phone.
Try what Scott suggested but it's looking like jtag may be your best option at this point.
jd1639 said:
Sorry to hear Odin didn't work. Odin does put the stock recovery on your phone in the correct partition if every thing goes correctly. But if your hard bricked Odin won't recovery the phone.
Try what Scott suggested but it's looking like jtag may be your best option at this point.
Click to expand...
Click to collapse
hell yeah this phone is hard bricked. But att was cool and let me return for a new one. Really no questions asked as long as you didnt damage it or get it wet. Rip to my first gs4. But the good thing is is that it should only take like 2 days to get a new one, because the first one shipped pretty quick. Thanks for all the help guys
I need help!!!
I try everything to root my S4, any different way and i can't root, i fell its something wrong with it, cause phone is 16gb shows only 9gb 6 gb its for miscellaneous files. can someone help?
I like to re install everything.
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
jd1639 said:
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
Click to expand...
Click to collapse
Baseband version I337UCUAMF3
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
MF3 = motochopper does not work. You would need to root using this method:
http://forum.xda-developers.com/showthread.php?t=2387577
NOTE: You cannot unroot once you do it. If you mess up your phone with root, there is likely no way to fix it. There is no possibility of installing a custom recovery, even after you have root...and so you can't flash any ROMs either. Know the risks and issues before you proceed and make sure root is THAT important to you.
Since you are on MF3 there is also no way to downgrade to previous firmware, you are stuck with the above restrictions until someone figures out a new exploit...and no ETA on that.
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
i gonna try, and i will let you guys know about. thanks...
jd1639 said:
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
Click to expand...
Click to collapse
I get stock on download mode. Any solution for it?
moiconlau said:
I get stock on download mode. Any solution for it?
Click to expand...
Click to collapse
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
jd1639 said:
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
Click to expand...
Click to collapse
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
moiconlau said:
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
Click to expand...
Click to collapse
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
moiconlau said:
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
How did you get it to work?
jd1639 said:
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Click to expand...
Click to collapse
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
moiconlau said:
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
Click to expand...
Click to collapse
Great to hear!
jd1639 said:
Great to hear!
Click to expand...
Click to collapse
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
fukenbiker said:
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
Click to expand...
Click to collapse
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
moiconlau said:
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
Click to expand...
Click to collapse
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
jd1639 said:
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
Click to expand...
Click to collapse
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
fukenbiker said:
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
Click to expand...
Click to collapse
is nothing also than i can do?
moiconlau said:
is nothing also than i can do?
Click to expand...
Click to collapse
Sadly no since u have MF3 only option is root only.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Dude, you pretty much hosed your new phone by not doing your home work before messing with it. I'm sure you're on mf3 firmware. Your best hope is to get it re-flashed at a bestbuy with the Samsung experience. You'll have some explaining to do! Good luck!
xBeerdroiDx said:
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Click to expand...
Click to collapse
att Build number is I337ucuamf3
Wayneman101 said:
att Build number is I337ucuamf3
Click to expand...
Click to collapse
You can probably get it to boot by pushing vol down when it goes to download mode. But your recovery is messed up now.
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
ryno9100 said:
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
Click to expand...
Click to collapse
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
jd1639 said:
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Click to expand...
Click to collapse
If I can find an old one can I use it and then update?
Wayneman101 said:
If I can find an old one can I use it and then update?
Click to expand...
Click to collapse
No, it has to be mf3 firmware and it's not currently available. Trying to flash an earlier firmware won't work. There is a qfuse in the phone's circuitry that is blown when mf3 is on the phone which won't let you downgrade.
Edit, I feel sorry for you man, messing up your phone in the first hour. You're not the only one. Here is what others have done. Read it all it might help. http://forum.xda-developers.com/showthread.php?p=45359306
Wayneman101 said:
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
Click to expand...
Click to collapse
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
ryno9100 said:
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
Click to expand...
Click to collapse
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
jd1639 said:
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
Click to expand...
Click to collapse
Do they charge anything to re-flash it?
ryno9100 said:
Do they charge anything to re-flash it?
Click to expand...
Click to collapse
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
jd1639 said:
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
Click to expand...
Click to collapse
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
ryno9100 said:
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
Click to expand...
Click to collapse
Make sure they have a Samsung experience kiosk. Not all bestbuys have them
I took it to best buy with a samsung experience. Them and geek squad couldn't or wouldn't help me. They said to go online to unroot it and fix it.
Anybody know what trying to update to 4.3 will do?
Wayneman101 said:
Anybody know what trying to update to 4.3 will do?
Click to expand...
Click to collapse
if your recovery is still broken, nothing. you can use the Odin filed for MF3 or find the thread about someone who use a recovery flasher app to repair before doing the update.
Wayneman101 said:
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
Click to expand...
Click to collapse
Hey... I jacked up my phone installing a custom recovery with GooManager too. It isn't for our phone. To get back to Android from DL mode just do power button+vol up+home and it will send ya back. Take it to Best Buy and say Kies broke your phone. You were trying to run an update and it messed it up. They can fix it for ya. Obviously you're rooted so just delete Superuser.apk and delete all root apps. Just in case. And don't be a derp and tell them the phone was rooted... Good Luck.
(Go back and hopefully they won't remember you.)
Sent from my SAMSUNG-SGH-I337
Hey guys I have just managed to brick my phone and I need some files in order to fix it.
If any body has sm-e500f phone inform me so that I can tell you the instructions for debrick img
thanks
nepalbiraj said:
Hey guys I have just managed to brick my phone and I need some files in order to fix it.
If any body has sm-e500f phone inform me so that I can tell you the instructions for debrick img
thanks
Click to expand...
Click to collapse
Download firmware from Sammobile and flash it via Odin, If It's stuck at Samsung logo then do a factory reset via recovery and that should do it.
Hassan 4 said:
Download firmware from Sammobile and flash it via Odin, If It's stuck at Samsung logo then do a factory reset via recovery and that should do it.
Click to expand...
Click to collapse
Tried that. no download mode no recovery nothing.
nepalbiraj said:
Tried that. no download mode no recovery nothing.
Click to expand...
Click to collapse
Are you sure It's charged? try leaving it for a while in the charger, may be your battery is totally empty, It won't open until you leave it a while in the charger
try pwr+vol-+menu to reboot
Hassan 4 said:
Are you sure It's charged? try leaving it for a while in the charger, may be your battery is totally empty, It won't open until you leave it a while in the charger
Click to expand...
Click to collapse
Yeeah tried that too thanks but its not working. I guess theres no soul in it LOL.
I tried charging two days straight no response not even charging indicator.
BusuDD said:
try pwr+vol-+menu to reboot
Click to expand...
Click to collapse
tried that bro but didnt work. I am here like pressing the 3 buttons forever but it didnt start or vibrate
Seemed you bricked your bootloader, only to fix i think is using a JTAG but i think its expensive
Try this link.... http://forum.xda-developers.com/showthread.php?p=30415128#post30415128. There are so many solutions for the problems related to galaxy phones. I hope you can find your solution there.
Hassan 4 said:
Seemed you bricked your bootloader, only to fix i think is using a JTAG but i think its expensive
Click to expand...
Click to collapse
Yeahh seems like it. I tried giving it to for repairing they said they could not open the phone for acessing the motherboard.
bad luck
crazykc said:
Try this link.... http://forum.xda-developers.com/showthread.php?p=30415128#post30415128. There are so many solutions for the problems related to galaxy phones. I hope you can find your solution there.
Click to expand...
Click to collapse
Thanks crazykc for the headsup. I will certainly look into that.
Too bad that I bricked my phone before I even started development for it.