[MOD][AOSP 5.1.X-STOCK 5.1.0] Centered clock & battery text percentage [DISCONTINUED]
Hi everybody !
All is said in the title
Just flash in recovery.
Always make a backup before !
Thanks to @garynych and @Dirk64 who worked on the 5.0.1 version.
Tested on :
AOSP 5.1.0-r1, -r3, -r5
AOSP 5.1.1-r1
Stock 5.1.0 LMY47D, LMY47I
Click to expand...
Click to collapse
If you want to go back to unmodified version, flash the proper zip of your rom.
BreckZeBoulay said:
Hi everybody !
All is said in the title
Just flash in recovery.
Thanks to @garynych and @Dirk64 who worked on the 5.0.1 version.
Click to expand...
Click to collapse
SWEET!
so this will work in stock L 5.1
boxcar8028 said:
so this will work in stock L 5.1
Click to expand...
Click to collapse
I don't think so but you can try.
Just make a backup before.
Works greatly 5.1 thank you soooooooooooo much for this, my eyes say thank you two. both of them
jrny99 said:
Works greatly 5.1 thank you soooooooooooo much for this, my eyes say thank you two. both of them
Click to expand...
Click to collapse
so this mod will work on stock Lollipop 5.1 ? :cyclops:
just flashed this mod and it totally works with my rooted stock L5.1
Sent from my Nexus 5 using XDA Free mobile app
boxcar8028 said:
just flashed this mod and it totally works with my rooted stock L5.1
Click to expand...
Click to collapse
Thanks for the test
First post updated !
Center Clock ~
Hi
I'm looking for have only battery text percentage.
Can anyone help me?
Sad to report, not sure if its my setup or this version of this mod but after a clean factory images update from LMY7D to LMY47I this mod will no longer work for me. It would successfully flash from TWRP 2.8.6.0 but with no change after booting up. Anyone else having this issue? maybe an update is needed for this mod.
Not working on my Nexus 5 running 5.1
(flashed with twrp)
it worked on my LMY47I
[/COLOR]
thelonelybat said:
Not working on my Nexus 5 running 5.1
(flashed with twrp)
Click to expand...
Click to collapse
OMG! I got it to work! it was TWRP. Not sure why the mod was working for others on LMY47I but not for me. The only thing that I could think of was that when I updated to LMY47I I also updated TWRP from 2.8.5.3 to 2.8.6.0 and I flashed the mod with 2.8.6.0. Just to make sure I used Flashify to re-flash TWRP back to 2.8.5.3 and re-try flashing the mod and IT WORKED! :good:
edit:
better late then never. TWRP 2.8.6.0 seems to be having lots of issues. http://forum.xda-developers.com/goo...h-recovery-t2511507/post59695750#post59695750
boxcar8028 said:
[/COLOR]
OMG! I got it to work! it was TWRP. Not sure why the mod was working for others on LMY47I but not for me. The only thing that I could think of was that when I updated to LMY47I I also updated TWRP from 2.8.5.3 to 2.8.6.0 and I flashed the mod with 2.8.6.0. Just to make sure I used Flashify to re-flash TWRP back to 2.8.5.3 and re-try flashing the mod and IT WORKED! :good:
edit:
better late then never. TWRP 2.8.6.0 seems to be having lots of issues. http://forum.xda-developers.com/goo...h-recovery-t2511507/post59695750#post59695750
Click to expand...
Click to collapse
man thank ya, yes many issues with the latest version of twrp for example with elementalx kernel -.-
boxcar8028 said:
[/COLOR]
OMG! I got it to work! it was TWRP. Not sure why the mod was working for others on LMY47I but not for me. The only thing that I could think of was that when I updated to LMY47I I also updated TWRP from 2.8.5.3 to 2.8.6.0 and I flashed the mod with 2.8.6.0. Just to make sure I used Flashify to re-flash TWRP back to 2.8.5.3 and re-try flashing the mod and IT WORKED! :good:
edit:
better late then never. TWRP 2.8.6.0 seems to be having lots of issues. http://forum.xda-developers.com/goo...h-recovery-t2511507/post59695750#post59695750
Click to expand...
Click to collapse
Most stable TWRP version for me is 2.8.5.2.
Just flashed this on my AOSP 5.1 ROM and it worked, but now the carrier text on the lockscreen is moved over to the right. Just a heads up.
After flashing status bar with signal dissapeared !!!!
Flashed and my phone now is missing notification and many other things. i can only use the phone from app drawer How can i undo this ?
I'm a newbie in this please help !!!
h3rodot said:
Flashed and my phone now is missing notification and many other things. i can only use the phone from app drawer How can i undo this ?
I'm a newbie in this please help !!!
Click to expand...
Click to collapse
Just dirty flash your rom or ask in your rom thread for someone to upload SystemUI.apk and push it to /system/priv-app
vladimir_carlan said:
Just dirty flash your rom or ask in your rom thread for someone to upload SystemUI.apk and push it to /system/priv-app
Click to expand...
Click to collapse
i have stock rom , just updated today OTA . afeter update i have rooted the phone usin g Nexus root toolkit. Worked like a charm .
Now i am trying to flash stock and unroot, but with the new security policy in lollipop 5.1 i can't get to authoryze my computer in usb debug. so i'm in a vicious circle.
Thank you guys, i managed to flash stock with nexus root toolkit. It worked after i completly turned off phone, and start operation with phone in loop
thelonelybat said:
Not working on my Nexus 5 running 5.1
(flashed with twrp)
Click to expand...
Click to collapse
h3rodot said:
i have stock rom , just updated today OTA . afeter update i have rooted the phone usin g Nexus root toolkit. Worked like a charm .
Now i am trying to flash stock and unroot, but with the new security policy in lollipop 5.1 i can't get to authoryze my computer in usb debug. so i'm in a vicious circle.
Thank you guys, i managed to flash stock with nexus root toolkit. It worked after i completly turned off phone, and start operation with phone in loop
Click to expand...
Click to collapse
good to see you’re back up and running:good: Always make a nandroid backup before anything:cyclops:
Related
Here you go folks. The miui v5 3.11.29 official for HTC ONE is released
http://en.miui.com/download-111.html
For MIUI English Forum
> http://en.miui.com/download-111.html
Harish_Kumar said:
For MIUI English Forum
> http://en.miui.com/download-111.html
Click to expand...
Click to collapse
we still need to install 4.2.2 gapps in this rom.
saketh91 said:
we still need to install 4.2.2 gapps in this rom.
Click to expand...
Click to collapse
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Harish_Kumar said:
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Click to expand...
Click to collapse
I don't know abt the kernel but I am loving this rom so far. No lags, the UI is perfect fit for the screen and loving some features like DND, IR etc..,
but the only thing missing is the gapps. We need to install separately i think. Loving the Internationalized weather widget too.
I get build prop problem, who else got it ?
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
you mean while installing?. It installed perfectly for me on TWRP 2.6.3.0
saketh91 said:
you mean while installing?. It installed perfectly fine for me on TWRP 2.6.3.0
Click to expand...
Click to collapse
Yeah, what is your current rom, cid, mid ?
hth2813 said:
Yeah, what is your current rom, cid, mid ?
Click to expand...
Click to collapse
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
saketh91 said:
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
Click to expand...
Click to collapse
I got that problem while installing ROM, i am in GPE 4.4
I'm also getting a status 7 getprop error in recovery.
hth2813 said:
I got that problem while installing ROM, i am in GPE 4.4
Click to expand...
Click to collapse
Ok there can be different reasons for this.
1.May be a bad download. Try downloading it again.
2.May be you did not clean flash it by wiping cache,system,data. Try wiping everything except internal storage and try again.
3.May be the recovery you are using doesn't support installing this rom. Try TWRP 2.6.3.0 I got it installed perfectly with that.
4.And finally the firmware which you are on. If it is GPE firmware then try switching to sense before flashing this. I had hell lot of problems with GPE firmware like unlocking the bootloader, installing the roms etc..,
May be these are not the reasons for your problem but just give it a try and report back
Droid69 said:
I'm also getting a status 7 getprop error in recovery.
Click to expand...
Click to collapse
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
saketh91 said:
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
Click to expand...
Click to collapse
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Droid69 said:
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Click to expand...
Click to collapse
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
saketh91 said:
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
Click to expand...
Click to collapse
Rom flashed with TWRP 2.6.3.0 thanks.
Ah, i have just tried CWM Recovery and it installed successful
Droid69 said:
Rom flashed with TWRP 2.6.3.0 thanks.
Click to expand...
Click to collapse
Glad you got it installed perfectly!!
hth2813 said:
Ah, i have just tried CWM Recovery and it installed successful
Click to expand...
Click to collapse
Nice to hear that you got it installed perfectly.:laugh:
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
yep the same problem
Direct download
Download page with all nightlies
For now, there is no network on XT1033.
Do you tested if everything works ?
Eurofighter_ty said:
Do you tested if everything works ?
Click to expand...
Click to collapse
No, not yet
We need XT1033 testers.
I always get stuck at cyanogenmod logo!
Any one else stuck?
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Just wait. It took 5 minutes for the first boot
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
ohn42 said:
Just wait. It took 5 minutes for the first boot
Click to expand...
Click to collapse
SaurabhSandav said:
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
Click to expand...
Click to collapse
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
zpmarcos said:
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
Click to expand...
Click to collapse
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Xt1032, latest twrp, bootloop.
SaurabhSandav said:
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Click to expand...
Click to collapse
what TWRP version? sorry but Im stuck :/
zpmarcos said:
what TWRP version? sorry but Im stuck :/
Click to expand...
Click to collapse
TWRP 2.8.3.0
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
sim card is not working on xt1033 but hotspot is working
any working recovery for moto g gpe 5.0.1..? so that we can try this this rom..
ohn42 said:
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
Click to expand...
Click to collapse
Thank you sir, you are the man!
Worked for me after 3 hours trying hahaha
I can't flash it error in TWRP E: can't mount /system. Any solution??
Is dual sim working or not
Tap-a-talked from the MOTOG
Flashed with philz,works like a charm,stablest ROM for moto g.
xt1033 sim card not working
I tested the cm12 official version for xt1033.The sim card is not working ...If anyone else flashed it and its working please post a reply....
Finnaly Cyanogen OS released his Marshmallow for Oneplus ONE
You guys can download here
Presentation Movie by @kawaii_bacon
You can flash this zip or you can install "Cyanogen Update Tracker" from playstore
IMPORTANT: This is INCREMENTAL/Update OTA so be sure you have 100% stock COS YOG7DAS2K1without Root with stock recovery before flash.
Have fun
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
megatomic said:
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
Click to expand...
Click to collapse
I forget to mention that I didn't test it. OP updated
but this is without MOD .... Why?
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
crazykas said:
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
Click to expand...
Click to collapse
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Ahhh screw it, I'm going to do it. I'll be back with my observations.
mekanismen said:
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
Click to expand...
Click to collapse
Link updated, thanks :good:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
Read red letters in OP
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Jjul said:
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Click to expand...
Click to collapse
No
mekanismen said:
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Click to expand...
Click to collapse
well tried that too..But didn't work
crazykas said:
well tried that too..But didn't work
Click to expand...
Click to collapse
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Setting.Out said:
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Click to expand...
Click to collapse
i dont know how to edit update script to skip release key verification
crazykas said:
i dont know how to edit update script to skip release key verification
Click to expand...
Click to collapse
Then try the first option..
Running really really good so smooth
Sent from my A0001 using Tapatalk
onyone can create zip for twrp?
Just finished setting up my phone after a complete clean flash (fastboot 12.1.1 + sideloading the update) and I gotta say that it feels really snappy so far. Noticed some new strange included apps, Instagram Content, Twitter Content and Discovery. I guess the Instagram and Twitter apps have something to do with the lock screen, but I've disabled them. I have no idea what Discovery does, so if anyone has a guess I'd love to hear it.
The most interesting thing will be battery life, but my verdict on that will have to wait until I've tested it for a couple of days.
Hey,
first sorry for my bad english and I hope you understand what I want to say.
I have flash my OnePlus2 full stock with fastboot and other methods and the phone starts normaly.
But I want use Paranoid Android and if I install Paranoid Android I have a bootloop. (I waited hours..)
I tried with follow recoveries:
Firmware Switch Zip
HybridRecovery from XDA Forum
Official TWRP for OnePlus 2
I have wiped all (flashed stock firmware)
I tried to install CyanogenMod 13 for OnePlus 2 and this doesnt work too.
I hope anyone can help me :c
Greetz
Mike
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
lilbluemirage said:
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
Click to expand...
Click to collapse
Isnt this only for "H2OS based Marshmallow ROMs"?
mansster said:
Isnt this only for "H2OS based Marshmallow ROMs"?
Click to expand...
Click to collapse
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
lilbluemirage said:
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
Click to expand...
Click to collapse
But I want use Paranoid Android and this firmware works not with CM
mansster said:
But I want use Paranoid Android and this firmware works not with CM
Click to expand...
Click to collapse
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
lilbluemirage said:
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
Click to expand...
Click to collapse
I want PA and I have official OOS3 at the moment.
I have installed the SWITCH to MM Recovery, but it doesnt work :/
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
lilbluemirage said:
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
Click to expand...
Click to collapse
No problem, I hope anyone can help me
Hi i just want to install cm11 on my d802 but all links seem to be down is there a mirror or can anybody upload the latest build of cm11?
Endercrafter said:
Hi i just want to install cm11 on my d802 but all links seem to be down is there a mirror or can anybody upload the latest build of cm11?
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B5nY6qKWWbk9Vm1lMWNZTHBjZG8
I think this was the last build (I downloaded it just before the cm site went down)
hope it helps :good:
Jeffery45801 said:
https://drive.google.com/open?id=0B5nY6qKWWbk9Vm1lMWNZTHBjZG8
I think this was the last build (I downloaded it just before the cm site went down)
hope it helps :good:
Click to expand...
Click to collapse
What bootloader is needed for it ? And which bootstacks ?Sorry for asking so much questions ! But still Thank u ?
Endercrafter said:
What bootloader is needed for it ? And which bootstacks ?Sorry for asking so much questions ! But still Thank u
Click to expand...
Click to collapse
Its been a while since I installed it myself but from what I remember, I believe it only worked if it was flashed over the stock g2 kitkat (or jellybean) rom. I've never really used bootstacks myself so I don't really know which one to go for, however I'd assume you could start by looking for ones made for kitkat.
Personally, I would do a clean install of the stock kk rom, reroot, flash custom recovery, and then install cm11.
Jeffery45801 said:
Its been a while since I installed it myself but from what I remember, I believe it only worked if it was flashed over the stock g2 kitkat (or jellybean) rom. I've never really used bootstacks myself so I don't really know which one to go for, however I'd assume you could start by looking for ones made for kitkat.
Personally, I would do a clean install of the stock kk rom, reroot, flash custom recovery, and then install cm11.
Click to expand...
Click to collapse
Ok thank u bro for all ur help ? Ill tell if this works soon