[Need Help] I can't flash the stock rom - GiONEE Elife E7

I recently bought a new gionee elife e7, but its rom (it didn't have the stock one) had a lot of problems so I want to change it. I downloaded GNQC DownLoad Tool and tried to flash the stock rom I found here : pan.baidu.com/s/1mgoIgha (pass : vt1a) . This rom is from gionee. My problem is that I get an error "The phone ver is different from SW ver" on GNQC DownLoad Tool. I tried to flash and other roms but I got the same error message. The version of my gionee elife e7 is GBW8901_A_NORIOS_094 (I can't find it anywhere on the google).
Can someone please help me flash the stock rom on my gionee e7?
EDIT : Stupid question, I found the solution. I had to disable SW check...

Good it is working!
What kind of Windows u have 7 or 8? 32bit or 64bit?

ren7o said:
Good it is working!
What kind of Windows u have 7 or 8? 32bit or 64bit?
Click to expand...
Click to collapse
I have windows 7 64 bit.... But I think it doesn't metter...
Just a note, I noticed that in the 4.4.2 update the COM ports are not working for some reason and you can not use GNQC DownLoad Tool. In my case I had to downgrade to a 4.2 rom (using CWM recovery) and then use GNQC DownLoad Tool because I can only see the COM ports in my PC when my phone is on android 4.2. Correct me if I am wrong.

Nice!
Every body talks about the GNQC DownLoad Tool is not working under windows 64bit.
What kind of CWM and which ROM 4.2 you flashed?
What was that SW check are you talking?
Thanks a lot!

ren7o said:
Nice!
Every body talks about the GNQC DownLoad Tool is not working under windows 64bit.
What kind of CWM and which ROM 4.2 you flashed?
What was that SW check are you talking?
Thanks a lot!
Click to expand...
Click to collapse
First of all, I have windows 7 64 bit and GNQC DownLoad Tool is working fine. I used the english version from here :
forum.xda-developers.com/showthread.php?p=51788389
The only case it is not working is when I update my gionee e7 to android 4.4.2 (the latest official india rom update, I update it through the official "System Update"). The latest update was charging my sim card (I lost 9 euros) for some reason I don't know (I guess they put a pre-installed virus? Not sure). It seems that, with the new update the COM ports just stop working, so the GNQC DownLoad Tool can't find them to flash new firmware. To fix this, I flashed TWRP recovery (forum.xda-developers.com/elife-e7/orig-development/recovery-t-r-p-recovery-2-8-5-0-t3050958) and installed the official china 4.2 rom (forum.xda-developers.com/showthread.php?t=2648457). I only do that to get the COM ports back because they are working in the china 4.2 rom (most of the things in the 4.2 rom I install this way are not working so I only do that for the COM ports). And after all that, I use the GNQC DownLoad Tool to flash a firmware from the beginning.
I hope this will help some of you!

It is really helpful post! Thanks for your detailed guide.
I alredy helped some e7 users with COM error problems.
All credits goes to you of course!
So which ROM is "the best" in your opinion?

Kitkat is best.
He is charged because this rom has 2 programe that sends automatic messages and need to Be deleted.
Salestatistic and
Salestrack
You need Root for that.
Also You can shut them down by modify build.prop lines:
ro.gn.oversea.salestrack.gi=yes
ro.gn.oversea.salestrack.gi=no
You should do both for safety.
The messages are sent to
00918527214747
00919880938662
Also,for fun,You can change those numbers with any so the messages will Be sent to that number.
The messages contains phone imei,operator code and other things about phone.
The messages are being sent every time You power on your phone and yes,IT charges your phone bill.
Sorry for my bad english.

Muresan01 said:
Kitkat is best.
He is charged because this rom has 2 programe that sends automatic messages and need to Be deleted.
Salestatistic and
Salestrack
You need Root for that.
Also You can shut them down by modify build.prop lines:
ro.gn.oversea.salestrack.gi=yes
ro.gn.oversea.salestrack.gi=no
You should do both for safety.
The messages are sent to
00918527214747
00919880938662
Also,for fun,You can change those numbers with any so the messages will Be sent to that number.
The messages contains phone imei,operator code and other things about phone.
The messages are being sent every time You power on your phone and yes,IT charges your phone bill.
Sorry for my bad english.
Click to expand...
Click to collapse
This is really helpful! Thank you!
I think they should have informed me about that before I lose 9 euros...

man007cgr said:
First of all, I have windows 7 64 bit and GNQC DownLoad Tool is working fine. I used the english version from here :
forum.xda-developers.com/showthread.php?p=51788389
The only case it is not working is when I update my gionee e7 to android 4.4.2 (the latest official india rom update, I update it through the official "System Update"). The latest update was charging my sim card (I lost 9 euros) for some reason I don't know (I guess they put a pre-installed virus? Not sure). It seems that, with the new update the COM ports just stop working, so the GNQC DownLoad Tool can't find them to flash new firmware. To fix this, I flashed TWRP recovery (forum.xda-developers.com/elife-e7/orig-development/recovery-t-r-p-recovery-2-8-5-0-t3050958) and installed the official china 4.2 rom (forum.xda-developers.com/showthread.php?t=2648457). I only do that to get the COM ports back because they are working in the china 4.2 rom (most of the things in the 4.2 rom I install this way are not working so I only do that for the COM ports). And after all that, I use the GNQC DownLoad Tool to flash a firmware from the beginning.
I hope this will help some of you!
Click to expand...
Click to collapse
how can i unbrick my phone if y have 4.4? I have the same problem than you (the p`hone ver is different from SW ver). Can I do anything? Recovery and normal phone doesn't work

Related

Downgrade Package Honor 6 Plus lollipop to kitkat

Latest Update honor 6 plus downgrade package:
I succesfully managed to downgrade lollipop 5.1 to kitkat 4.4 using this downgrade package .
i can confirm that european b324 can be downgraded to b142 eu version
notes : after downgrade to b300, i update b142 using sdcard but at 30% installation it says installation failed...but the phone reboot again in kitkat 4.4... im missing double tap to wake up function ....and
so what i do is i insert b132 in my sdcard and just update it...it managed to update again until 100% and all the function are working again
im using honor 6 plus lollipop currently running on b324 version ...after all the handphone working fine ...but im always try to going back to kitkat since my sound button not working after lollipop update....
so after a while and try. recently i found this package for downgrade official lollipop to kitkat. you can download here
downgrade package EU lollipop to kitkat honor 6 plus
let us try this and give feedback if its working
i try this downgrade before and its not working for me..so lets hope this new one can help you and me
afikri6 said:
im using honor 6 plus lollipop currently running on b324 version ...after all the handphone working fine ...but im always try to going back to kitkat since my sound button not working after lollipop update....
so after a while and try. recently i found this package for downgrade official lollipop to kitkat. you can download here
downgrade package EU lollipop to kitkat honor 6 plus
let us try this and give feedback if its working
i try this downgrade before and its not working for me..so lets hope this new one can help you and me
Click to expand...
Click to collapse
It worked for me ..
I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file. Although it is mentioned in the 2nd step that the version should change to the transition package "PE-TL10C900B300" .. Well mine didn't !!
But then too i went ahead to the 3rd step nd it worked for me .. Im on Kitkat now ..
P.S : After updating to kitkat from the transition package during the first boot i got an error saying user partition unusable .. I had to factory reset it / Erase it .. I dont know what that meant please lemme know what that is (My SD Card was my default storage location).. But never the less kitkat is working fine .. I just now reinstalled kitkat via Recovery mode and m gonna root it now
PSS: I never backup since i only have movies n Tv shows in my SD Card ..
Cheers
How i reinstall kitkat from recovery.please provide steps
Thanks for your work
Downgrade Package Chinese Honor 6 Plus lollipop to kitkat
I am tryed Honor 6+ PE-TL10 Lollipop CN B351 EMUI3.1_ Android5.10.16. I happened more problems and issues:
- could not use talking clock aplications like Caynax Hourly Chime PRO, AutomateIt and AutoMagic (could not use speech rules with speaking clock in this apps);
- could not use apps that automatically activate phone speaker at the beginning of the incoming and outgoing call. I tryed AutomateIt and AutoMagic rules that activate speakerphone automatically, but it is run only to outgoing call;
- could not use applications like Missed Call Reminder (not call an SMS sound reminder and vibration).
Some applications that start after the phone starts up, certainly not start, even if I enabled these app settings on phone menu in settings - startup manager. Some applications with status bar notification and sound notification not run and not make notification, even I activated options with allow notifications on settings - notification center. I allowed all of apps to keep running after the screen is turned off, but in vain.
I could not downgrade to B260 KitKat until I found an special firmware B300 needed to downgrade Huawei Honor 6 Plus from Lollipop 5 to Kitkat 4 Android. I found this firmware very, very hard... I found only after I wrote Google search in Chinese language. Only a downgrade version from China was OK. A downgrade version from EU countries not run. I installed PE-TL10C900B324 EU 5.1.1 firmware version, then I tryed to install downgrade version from EU countries, but not run.
On an Europe and other countries Honor 6+ PE-TL10 firmware it is impossible to switch 3G/4G from SIM 1 to SIM 2. This setting is missing from the SIM card management phone menu.
You can download this downgrade firmware from here: http://www.4shared.com/zip/Uk1rNF9Hce/Honor_6_Plus_PE-TL10_downgrade.html
Lolipop to Kitkat - Rollback from 3.1 emui to 3.0 emui
Trespasser137 said:
It worked for me ..
I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file. Although it is mentioned in the 2nd step that the version should change to the transition package "PE-TL10C900B300" .. Well mine didn't !!
But then too i went ahead to the 3rd step nd it worked for me .. Im on Kitkat now ..
P.S : After updating to kitkat from the transition package during the first boot i got an error saying user partition unusable .. I had to factory reset it / Erase it .. I dont know what that meant please lemme know what that is (My SD Card was my default storage location).. But never the less kitkat is working fine .. I just now reinstalled kitkat via Recovery mode and m gonna root it now
It worked for me too, I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file.
many thanks .. i was too upset with lolipop .. its u very headache for me..
Click to expand...
Click to collapse
Can i downgrade from android m to kitkat ?
why would you want to downgrade your phones?
ergo14 said:
why would you want to downgrade your phones?
Click to expand...
Click to collapse
I need root
there is no root at android m !
@LI™ said:
I need root
there is no root at android m !
Click to expand...
Click to collapse
there is. try multitool
shubham412302 said:
there is. try multitool
Click to expand...
Click to collapse
Cant get my code to unluck bootloader !
sb help me to get this pleaaaase !
Nice post, a dummy question though, would the this European EMUI 3.0 package, which has the PE_TL10 model number in the file name, work well on my WCDMA-focused PE-UL00 model? did a search around on the web without much luck... wanting to try regardless but fearful bricking my phone...
Thanks.

Found Marshmellow Update Link for Honor 7

Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Found Marshmellow Update Link for Honor 7
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Can you make a banana milkshake with strawberries? You can't. Same with installing the European build Android on Indian, Chinese etc.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
ashahriar said:
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Click to expand...
Click to collapse
Unlock bootloader
Root
Install Titanium Backup
Install the desired apps
Freeze the unwanted apps
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Hi - Indian firmware version starts with PLK-UL00IN. My mobile firmware version is PLK-UL00. Shouldn't I be able to upgrade to the India firmware.
My apologies to the admin in advance as I have posted similar question in a different thread. But this thread is more suitable to the topic. I am a novice when it comes to firmware.
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
rspn69 said:
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Click to expand...
Click to collapse
Dude were you on B160 prior to updating to B330?
ahmedzj said:
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
Click to expand...
Click to collapse
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
shiva.kakkar11 said:
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
Click to expand...
Click to collapse
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
ahmedzj said:
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
Click to expand...
Click to collapse
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
ahmedzj said:
Dude were you on B160 prior to updating to B330?
Click to expand...
Click to collapse
I have updated from B 160 to B 304
shiva.kakkar11 said:
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
Click to expand...
Click to collapse
Yup the download was corrupted, i redownloaded it and compared the checksum , Now its installed .. thank you
rspn69 said:
I think many of us may not be aware as how to perform local update in honor 7 which has marshmallow installed on it. I have gone through it and understand how it feels when you download an update and while trying to find local update option update app. Its frustrating and discouraging too. But I could find the way to do it on some other site. Its simple and easy. Just see below.
How to Update
Unpack the firmware package on your computer.
Transfer the extracted dload folder to your phone’s microSD card.
Take a backup of your important stuff using Huawei’s native app.
Safely unplug the USB cable and turn your phone off.
Reboot while holding Vol Up + Vol down + Power for a few seconds. Release Power upon vibration.
Once the upgrade starts let go of the volume keys and allow the installation to proceed.
And enjoy
Click to expand...
Click to collapse
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
Hi Ahmed, you can very well download and install the same. I have done that and have not found any bug till now since yesterday.
Works! Thanks!!
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
Click to expand...
Click to collapse
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
seethahere said:
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
Click to expand...
Click to collapse
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Shevvy said:
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Click to expand...
Click to collapse
I think the European version file is over here - http://forum.xda-developers.com/honor-7/general/official-marshmallow-6-0-file-beta-b320-t3318570
Hi, mine is Malaysia set, now at latest firmware B130. Is it safe for me to update to B330 ?

Did LG-FIRMWARE stop to support for offical KDZ?

I want to install stock kdz for my g2 but the server send "403 Forbidden" so I tried using some free proxy to be sure that my country has problem for the site. However, I tried all of the following sites with NO LUCK http://devtester.ro/projects/lg-firmwares/ http://lg-phone-firmware.com/ http://lg-firmware-rom.com/. Do you have any problems to download them? I tried to modify link as "http://pkg02.azure.gdms.lge.com/dn/downloader.dev?fileKey=...." and the other one. One of them gives "400 BAD REQUEST" other one is 403 FORBIDDEN. Thanks for your advice.
My phone specs from csgm.lgmobile.com----
Code:
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>HIDDEN*</esn>
<model>LGD802</model>
<suffix>A6URBK</suffix>
<msn>309KPZKHIDDEN*</msn>
<esn_date></esn_date>
<sw_version>D80230C_00</sw_version>
<sw_url>http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW6918J232QJA4T8174FBSU/D80230c_00.kdz</sw_url>
<sw_locale_url></sw_locale_url>
<sw_recommand_uri></sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
<buyer>6UR</buyer>
<file_name>D80230c_00.kdz</file_name>
</auth_model_check> </response>
Seems so. I've tested it on http://devtester.ro/projects/lg-firmwares/download.php with IMEI search. I got a result but the download button doesn't respond.
Thats pretty sh***y. Let's hope anybody has a backup.
Jan Philipp said:
Seems so. I've tested it on http://devtester.ro/projects/lg-firmwares/download.php with IMEI search. I got a result but the download button doesn't respond.
Thats pretty sh***y. Let's hope anybody has a backup.
Click to expand...
Click to collapse
Thanks for your feedback. Does anybody has orginal kdz file that I need? This site has some roms for g2 but i don't know which one is compatible for our devices. Especially baseband and boot partition. I have lollipop installed now but I have same stability problem so I want to reflash orginal kdz. Thanks.
seems they ( LG official ) changed something with the kdz server...maybe different server address or somekind of maintance i tried to use flashtool with D80220H_00.kdz and it wont start "an error occured" ... sad but seems i stuck with custom roms, and i am unable to restore the stock firmware to my phone.
Now i am using the old gold Cloudy KK rom with stock kernel but sadly thing about no chance to restore the phone
My op system is WIN10 64bit
use XDM download manager

Restore stock rom .

Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
What is your build number and android version I want to know
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
I guess so as i did tried to reflash stock ROM with Mobile Upgrade Q 5.0.0 a few days ago, but it didn´t work. Then i used Mobile Upgrade Q 5.1.8 but it displayed that i had the latest software so no reflashing at all, i was incapable of reflashing and clearing the \system partition, for me it is a real problem as i was expecting to delete all the traces of SuperSU root, Xposed, etc; with the aim of moving to Magisk and keep passing safetynet. Anyone has any clue so that could help me reflashing latest stock MM ROM?
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
r_ramalho said:
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
Click to expand...
Click to collapse
Hello @r_ramalho is there a guide using both softwares?
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
r_ramalho said:
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
Click to expand...
Click to collapse
I was also considering downgrade to LP by performing a restore from my TWRP backup. May be easier and safer, as ELUGA modifies certain branded partitions, I guess... Any inconvenience related to that?
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
bowtie81 said:
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
Click to expand...
Click to collapse
I agree with you, that is a bad movement from Alcatel not to give access to ROM zip. It would be so easy to flash it via settings _ apply update from zip, as many devices do. Weeks ago I was desperate to find a stock zip for my 6045Y but no luck. It's a shame to let dye this music lover smartphone.
I have the stock MM rom if anybody wants it.
Bogdan28 said:
I have the stock MM rom if anybody wants it.
Click to expand...
Click to collapse
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
ciclolars said:
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
Click to expand...
Click to collapse
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Bogdan28 said:
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Click to expand...
Click to collapse
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
ciclolars said:
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
Click to expand...
Click to collapse
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Bogdan28 said:
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Click to expand...
Click to collapse
Sorry, i didn't explain myself properly. I mean, I have already the latest MM stock ROM dated from january of 2017, my device is a 6045Y. However, a few days ago there has been released an update, but my guess is that only for 6045I devices, so i don't have it and can´t reflash my Idol 3 with the same ROM i currently have.
PS:
I tried to flash via TWRP this zip https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 and then use the Mobile Upgrade Q to get the latest MM stock, but Mobile Upgrade Q keeps saying "you have already the latest update" which this statement is not true after flashing this zip. Finally, I restored my TWRP backup so i'm in the same state as i began this morning, i'm tired of this policy of Alcatel that there is no official zip from stock firmwares, the only way is using an online tool thar refuses to reflash the same firmware.
I am from india, using 6045k, lost duel sim support due to flashing of marionette's Rom. Still trying to get duel sim back, tried eluga firmware also, but unfortunately i didn't get any error at 45%. Now i am using flyos 2.0, its working like charm. But only one sim is there, i tried several software upgrader versions, but server is not connecting, its always stuck at 20%.
Its been a year that i am trying to get to stock rom. I have done search in several threads and contacted some senior members but it didn't help,
Pls help me, how can i get back to stock rom and get duel sim Support back??
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thank god, today I got my phone to stock rom, by using q5.1.8.
Actually, yesterday only i heard about q.5.1.8, its been a year that i was trying to do this. Appart from q5.1.8, i connected VPN to U. S. Now everything is fine.
I dont know which one helped me, that the q5.1.8 or the VPN. :laugh:
Thanks to all.
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thanks! This helped fix a bricked phone.
i am looking for alcatel idol 3 4.7 stock rom. Build number 6039y
can anyone help me with it?
https://forum.xda-developers.com/idol-3/general/guide-restore-idol-3-to-factory-rom-t3769739 this may be what anyone is looking for.

dm-verification faild

When I go to recovery I get this info:
Dm-verify verification faild
Need to check DRK first..
I have flashed firmware and I get this info,
What is the best way to solve this,I read try to found on google but no one give the answer hot to fix this problem ..
Should I try to install another firmware?
no one have an idea how to fix this, I am waithing fort a week for someone to help me..
jjoeshua said:
no one have an idea how to fix this, I am waithing fort a week for someone to help me..
Click to expand...
Click to collapse
According with your model - you may try to download "4 files firmware repair" and flash with Odin. - this is an example, search for you model!!!
You may try Smart Switch for PC - it's a Samsung program which will help you restore the last original stock firmware according with your phone S/N (located under the battery).
Hoping that there is no emmc failure...
When I download this 4 files I flash one by one tru Odin or all files put together in odin?
My model is sm-n910t, tmobile, can I downlaod and flash other sm-n910f clean, without provider?
jjoeshua said:
When I download this 4 files I flash one by one tru Odin or all files put together in odin?
My model is sm-n910t, tmobile, can I downlaod and flash other sm-n910f clean, without provider?
Click to expand...
Click to collapse
Mate, I don't advise to flash the 910F model, as it may break some features which are dedicated to your 910T model. SO better try the 910T repair files. Ans yes, all of them in the same time - your check the boxes in Odin and the phone will be flashed one after the other. Odin knows the order.
BUT!!! As I said before - try first with Smart Switch - https://forum.xda-developers.com/showpost.php?p=70652492&postcount=10
I believe you have more chances to get it done this way faster and cleaner.
Also (disclaimer) - as you will do all this on your risk, please search and read a lot before.
I download and flash through Odin latest firmware that i found, security update is from 1 july 2017..
Than I try to install TWRP
I also try to root with CF auto root
And after all this its the same,nothing of this not solve the problem..
I have bad and old Pc, and computer wont install and open Smart Switch.
First thing when I found better PC is that I will try with Smart Switch and if that not help me the last option is to flash that 4 files that you give me link..
w41ru5 said:
According with your model - you may try to download "4 files firmware repair" and flash with Odin. - this is an example, search for you model!!!
You may try Smart Switch for PC - it's a Samsung program which will help you restore the last original stock firmware according with your phone S/N (located under the battery).
Hoping that there is no emmc failure...
Click to expand...
Click to collapse
I have problem with downloading these 4 files
Can you help me...
When I try to download ,it says that I need premium acount,but I dont have money buy it..
Is there any other site that I can download these 4 repair files..
jjoeshua said:
I have problem with downloading these 4 files
Can you help me...
When I try to download ,it says that I need premium acount,but I dont have money buy it..
Is there any other site that I can download these 4 repair files..
Click to expand...
Click to collapse
Sorry, I can't help. But why don't you go to search and read on the 910T forum - https://forum.xda-developers.com/note-4-tmobile
w41ru5 said:
Sorry, I can't help. But why don't you go to search and read on the 910T forum - https://forum.xda-developers.com/note-4-tmobile
Click to expand...
Click to collapse
Ok thx! I will try.
I found laptop from my friend ,install smart switch and i get info that i have update ,so I downlaod and update phone.
It still 6.0.1 but security update is from 1 avgust 2017. Now when I,go to option about phone softwere update it says device is up to date.
Finally I have install the latest stock version.
But problem with dm verify verification is still there.. smart switch not fix that..
But now I now that if Maybe get someday again update I will install it try amart switch..
Thx for help ,and sorry for bothering you with some stupid questions. .

			
				
jjoeshua said:
Ok thx! I will try.
I found laptop from my friend ,install smart switch and i get info that i have update ,so I downlaod and update phone.
It still 6.0.1 but security update is from 1 avgust 2017. Now when I,go to option about phone softwere update it says device is up to date.
Finally I have install the latest stock version.
But problem with dm verify verification is still there.. smart switch not fix that..
But now I now that if Maybe get someday again update I will install it try amart switch..
Thx for help ,and sorry for bothering you with some stupid questions. .
Click to expand...
Click to collapse
Hey man, no problem, happy to share knowledge (as little as it is ), learn and help. This is XDA about.

Categories

Resources